nixpkgs/doc/build-helpers/trivial-build-helpers.chapter.md

Trivial build helpers

Nixpkgs provides a variety of wrapper functions that help build commonly useful derivations. Like stdenv.mkDerivation, each of these builders creates a derivation, but the arguments passed are different (usually simpler) from those required by stdenv.mkDerivation.

runCommand

runCommand :: String -> AttrSet -> String -> Derivation

runCommand name drvAttrs buildCommand returns a derivation that is built by running the specified shell commands.

name :: String

The name that Nix will append to the store path in the same way that stdenv.mkDerivation uses its name attribute.

drvAttr :: AttrSet

Attributes to pass to the underlying call to stdenv.mkDerivation.

buildCommand :: String

Shell commands to run in the derivation builder.

::: {.note} You have to create a file or directory $out for Nix to be able to run the builder successfully. :::

::: {.example #ex-runcommand-simple}

Invocation of runCommand

(import <nixpkgs> {}).runCommand "my-example" {} ''
  echo My example command is running

  mkdir $out

  echo I can write data to the Nix store > $out/message

  echo I can also run basic commands like:

  echo ls
  ls

  echo whoami
  whoami

  echo date
  date
''

:::

runCommandCC

This works just like runCommand. The only difference is that it also provides a C compiler in buildCommand's environment. To minimize your dependencies, you should only use this if you are sure you will need a C compiler as part of running your command.

runCommandLocal

Variant of runCommand that forces the derivation to be built locally, it is not substituted. This is intended for very cheap commands (<1s execution time). It saves on the network round-trip and can speed up a build.

::: {.note} This sets allowSubstitutes to false, so only use runCommandLocal if you are certain the user will always have a builder for the system of the derivation. This should be true for most trivial use cases (e.g., just copying some files to a different location or adding symlinks) because there the system is usually the same as builtins.currentSystem. :::

writeTextFile, writeText, writeTextDir, writeScript, writeScriptBin, writeShellScript, writeShellScriptBin

Nixpkgs provides the following functions for producing derivations which write text into the Nix store: writeTextFile, writeText, writeTextDir, writeScript, writeScriptBin, writeShellScript, and writeShellScriptBin.

writeText, writeTextDir, writeScript, writeScriptBin, writeShellScript, and writeShellScriptBin are convenience functions over writeTextFile.

These are useful for creating files from Nix expressions, which may be scripts or non-executable text files.

Each of these functions will cause a derivation to be produced. When you coerce the result of each of these functions to a string, it will evaluate to the store path of this derivation.

:::: {.warning} Some of these functions will put the resulting files within a directory inside the derivation output. If you need to refer to the resulting files somewhere else in Nix code, remember to append the path to the file For example:

my-file = writeTextFile {
  name = "my-file";
  text = ''
    Contents of File
  '';
  destination = "/share/my-file";
}

writeShellScript "evaluate-my-file.sh" ''
  cat ${my-file}/share/my-file
'';

::::

writeTextFile

Writes a text file to the store

writeTextFile takes an attribute set with the following possible attributes:

name

Corresponds to the name used in the Nix store path identifier.

text

The contents of the file.

executable optional

Make this file have the executable bit set. Defaults to false

destination optional

Supplies a subpath under the derivation's Nix store ouput path into which to create the file. It may contain directory path elements, these are created automatically when the derivation is realized. Defaults to "", which indicates that the store path itself will be a file containing the text contents.

checkPhase optional

Commands to run after generating the file, e.g. lints. It defaults to "" (no checking).

meta optional

Additional metadata for the derivation. It defaults to {}.

allowSubstitutes optional

Whether to allow substituting from a binary cache. It defaults to false, as the operation is assumed to be faster performed locally. You may want to set this to true if the checkPhase step is expensive.

preferLocalBuild optional

Whether to prefer building locally, even if faster remote builders are available. It defaults to true for the same reason allowSubstitutes defaults to false.

The resulting store path will include some variation of the name, and it will be a file unless destination (see below) is used, in which case it will be a directory.

::: {.example #ex-writeTextFile}

Usages of writeTextFile

# Writes my-file to /nix/store/<store path>/some/subpath/my-cool-script,
# making it executable and also supplies values for the less-used options
writeTextFile rec {
  name = "my-cool-script";
  text = ''
    #!/bin/sh
    echo "This is my cool script!"
  '';
  executable = true;
  destination = "some/subpath/my-cool-script";
  checkPhase = ''
    ${pkgs.shellcheck}/bin/shellcheck $out/${destination}
  '';
  meta = {
    license = pkgs.lib.licenses.cc0;
  };
  allowSubstitutes = true;
  preferLocalBuild = false;
}

# Writes my-file to /nix/store/<store path>
# See also the `writeText` helper function below.
writeTextFile {
  name = "my-file";
  text = ''
    Contents of File
  '';
}

# Writes executable my-file to /nix/store/<store path>/bin/my-file
# see also the `writeScriptBin` helper function below.
writeTextFile {
  name = "my-file";
  text = ''
    Contents of File
  '';
  executable = true;
  destination = "/bin/my-file";
}

:::

writeText

Writes a text file to the store

writeText takes two arguments: name and text, each of which should be a string.

name

the name used in the Nix store path.

text

will be the contents of the file.

The store path will include the the name, and it will be a file. Any path separators and shell-reserved elements in the name are escaped to create the store path identifier.

Here is an example.

::: {.example #ex-writeText}

Usage of writeText

# Writes my-file to /nix/store/<store path>
writeText "my-file"
  ''
  Contents of File
  '';

:::

This example is equivalent to:

writeTextFile {
  name = "my-file";
  text = ''
    Contents of File
  '';
}

writeTextDir

Writes a text file within a subdirectory of the store.

writeTextDir takes two arguments: path and text, each of which should be a string.

path

the destination within the Nix store path under which to create the file.

text

the contents of the file.

The store path will be a directory.

::: {.example #ex-writeTextDir}

Usage of writeTextDir

# Writes contents of file to /nix/store/<store path>/share/my-file
writeTextDir "share/my-file"
  ''
  Contents of File
  '';

:::

This example is equivalent to:

writeTextFile {
  name = "my-file";
  text = ''
    Contents of File
  '';
  destination = "share/my-file";
}

writeScript

Writes a script within the store.

writeScript takes two arguments: name and text, each of which should be a string.

name

the name used in the Nix store path.

text

the contents of the file.

The created file is marked as executable.

The store path will include the the name, and it will be a file. Any path separators and shell-reserved elements in the name are escaped to create the store path identifier.

Here is an example.

::: {.example #ex-writeScript}

Usage of writeScript

# Writes my-file to /nix/store/<store path> and makes executable
writeScript "my-file"
  ''
  Contents of File
  '';

:::

This example is equivalent to:

writeTextFile {
  name = "my-file";
  text = ''
    Contents of File
  '';
  executable = true;
}

writeScriptBin

Writes a script within a "bin" subirectory of a subdirectory of the store.

writeScriptBin takes two arguments: name and text, each of which should be a string.

name

the name used in the Nix store path and within the file generated under the store path.

text

the contents of the file.

The created file is marked as executable.

The file's contents will be put into /nix/store/<store path>/bin/<name>.

The store path will include the the name, and it will be a directory. Any path separators and shell-reserved elements in the name are escaped to create the store path identifier.

::: {.example #ex-writeScriptBin}

Usage of writeScriptBin

writeScriptBin "my-script"
  ''
  echo "hi"
  '';

:::

This example is equivalent to:

writeTextFile {
  name = "my-script";
  text = ''
    echo "hi"
  '';
  executable = true;
  destination = "bin/my-script"
}

writeShellScript

Writes a shell script to the store.

writeShellScript takes two arguments: name and text, each of which should be a string.

name

the name used in the Nix store path.

text

the contents of the file.

The created file is marked as executable.

This function is almost exactly like writeScript, but it prepends a shebang line that points to the runtime shell (usually bash) at the top of the file contents.

The store path will include the the name, and it will be a file. Any path separators and shell-reserved elements in the name are escaped to create the store path identifier.

Here is an example.

::: {.example #ex-writeShellScript}

Usage of writeShellScript

writeShellScript "my-script"
  ''
  echo "hi"
  '';

:::

This example is equivalent to:

writeTextFile {
  name = "my-script";
  text = ''
    #! ${pkgs.runtimeShell}
    echo "hi"
  '';
  executable = true;
}

writeShellScriptBin

Writes a shell script to a "bin" subdirectory of subdirectory of the store.

writeShellScriptBin takes two arguments: name and text, each of which should be a string.

name

the name used in the Nix store path and within the file generated under the store path.

text

the contents of the file.

This function is almost exactly like writeScriptBin, but it prepends a shebang line that points to the runtime shell (usually bash) at the top of the file contents.

The file's contents will be put into /nix/store/<store path>/bin/<name>.

The store path will include the the name, and it will be a directory. Any path separators and shell-reserved elements in the name are escaped to create the store path identifier.

::: {.example #ex-writeShellScriptBin}

Usage of writeShellScriptBin

writeShellScriptBin "my-script"
  ''
  echo "hi"
  '';

:::

This example is equivalent to:

writeTextFile {
  name = "my-script";
  text = ''
    #! ${pkgs.runtimeShell}
    echo "hi"
  '';
  executable = true;
  destination = "bin/my-script"
}

concatTextFile, concatText, concatScript

These functions concatenate files to the Nix store in a single file. This is useful for configuration files structured in lines of text. concatTextFile takes an attribute set and expects two arguments, name and files. name corresponds to the name used in the Nix store path. files will be the files to be concatenated. You can also set executable to true to make this file have the executable bit set. concatText andconcatScript are simple wrappers over concatTextFile.

Here are a few examples:

# Writes my-file to /nix/store/<store path>
concatTextFile {
  name = "my-file";
  files = [ drv1 "${drv2}/path/to/file" ];
}
# See also the `concatText` helper function below.

# Writes executable my-file to /nix/store/<store path>/bin/my-file
concatTextFile {
  name = "my-file";
  files = [ drv1 "${drv2}/path/to/file" ];
  executable = true;
  destination = "/bin/my-file";
}
# Writes contents of files to /nix/store/<store path>
concatText "my-file" [ file1 file2 ]

# Writes contents of files to /nix/store/<store path>
concatScript "my-file" [ file1 file2 ]

writeShellApplication

This can be used to easily produce a shell script that has some dependencies (runtimeInputs). It automatically sets the PATH of the script to contain all of the listed inputs, sets some sanity shellopts (errexit, nounset, pipefail), and checks the resulting script with shellcheck.

For example, look at the following code:

writeShellApplication {
  name = "show-nixos-org";

  runtimeInputs = [ curl w3m ];

  text = ''
    curl -s 'https://nixos.org' | w3m -dump -T text/html
  '';
}

Unlike with normal writeShellScriptBin, there is no need to manually write out ${curl}/bin/curl, setting the PATH was handled by writeShellApplication. Moreover, the script is being checked with shellcheck for more strict validation.

symlinkJoin

This can be used to put many derivations into the same directory structure. It works by creating a new derivation and adding symlinks to each of the paths listed. It expects two arguments, name, and paths. name is the name used in the Nix store path for the created derivation. paths is a list of paths that will be symlinked. These paths can be to Nix store derivations or any other subdirectory contained within. Here is an example:

# adds symlinks of hello and stack to current build and prints "links added"
symlinkJoin { name = "myexample"; paths = [ pkgs.hello pkgs.stack ]; postBuild = "echo links added"; }

This creates a derivation with a directory structure like the following:

/nix/store/sglsr5g079a5235hy29da3mq3hv8sjmm-myexample
|-- bin
|   |-- hello -> /nix/store/qy93dp4a3rqyn2mz63fbxjg228hffwyw-hello-2.10/bin/hello
|   `-- stack -> /nix/store/6lzdpxshx78281vy056lbk553ijsdr44-stack-2.1.3.1/bin/stack
`-- share
    |-- bash-completion
    |   `-- completions
    |       `-- stack -> /nix/store/6lzdpxshx78281vy056lbk553ijsdr44-stack-2.1.3.1/share/bash-completion/completions/stack
    |-- fish
    |   `-- vendor_completions.d
    |       `-- stack.fish -> /nix/store/6lzdpxshx78281vy056lbk553ijsdr44-stack-2.1.3.1/share/fish/vendor_completions.d/stack.fish
...

writeReferencesToFile

Writes the closure of transitive dependencies to a file.

This produces the equivalent of nix-store -q --requisites.

For example,

writeReferencesToFile (writeScriptBin "hi" ''${hello}/bin/hello'')

produces an output path /nix/store/<hash>-runtime-deps containing

/nix/store/<hash>-hello-2.10
/nix/store/<hash>-hi
/nix/store/<hash>-libidn2-2.3.0
/nix/store/<hash>-libunistring-0.9.10
/nix/store/<hash>-glibc-2.32-40

You can see that this includes hi, the original input path, hello, which is a direct reference, but also the other paths that are indirectly required to run hello.

writeDirectReferencesToFile

Writes the set of references to the output file, that is, their immediate dependencies.

This produces the equivalent of nix-store -q --references.

For example,

writeDirectReferencesToFile (writeScriptBin "hi" ''${hello}/bin/hello'')

produces an output path /nix/store/<hash>-runtime-references containing

/nix/store/<hash>-hello-2.10

but none of hello's dependencies because those are not referenced directly by hi's output.