toPath has confusing semantics and is never necessary; it can always
either just be omitted or replaced by pre-concatenating `/.`. It has
been marked as "!!! obsolete?" for more than 10 years in a C++
comment, hopefully removing it will let us properly deprecate and,
eventually, remove it.
I ended up with a corrupted image with the debugfs contraption once, and
given I couldn't reproduce the problem I suppose that happens if the
filesystem of the builder runs out of space.
At least in this instance fsck could detect it, so let's add it as a
sanity check.
The ability to specify "-drive if=scsi" has been removed in QEMU version
2.12 (introduced in 3e3b39f173).
Quote from https://wiki.qemu.org/ChangeLog/2.12#Incompatible_changes:
> The deprecated way of configuring SCSI devices with "-drive if=scsi"
> on x86 has been removed. Use an appropriate SCSI controller together
> "-device scsi-hd" or "-device scsi-cd" and a corresponding "-blockdev"
> parameter instead.
So whenever the diskInterface is "scsi" we use the new way to specify
the drive and fall back to the deprecated way for the time being. The
reason why I'm not using the new way for "virtio" and "ide" as well is
because there is no simple generic way anymore to specify these.
This also turns the type of the virtualisation.qemu.diskInterface option
to be an enum, so the user knows which values are allowed but we can
also make sure the right value is provided to prevent typos.
I've tested this against a few non-disk-related NixOS VM tests but also
the installer.grub1 test (because it uses "ide" as its drive interface),
the installer.simple test (just to be sure it still works with
"virtio") and all the tests in nixos/tests/boot.nix.
In order to be able to run the grub1 test I had to go back to
8b1cf100cd (which is a known commit where
that test still works) and apply the QEMU update and this very commit,
because right now the test is broken.
Apart from the tests here in nixpkgs, I also ran another[1] test in
another repository which uses the "scsi" disk interface as well (in
comparison to most of the installer tests, this one actually failed
prior to this commit).
All of them now succeed.
[1]: 9b5a119972/tests/system/kernel/bfq.nix
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @edostra, @grahamc, @dezgeg, @abbradar, @ts468
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
exportReferencesGraph is deprecated and doesn't have the generated
initial Nix database contain the SHA256 of the contents of the store
paths, which breaks various things under Nix 2.0.
- `localSystem` is added, it strictly supercedes system
- `crossSystem`'s description mentions `localSystem` (and vice versa).
- No more weird special casing I don't even understand
TEMP
Instead of imagemagick built with many libraries
(notably librsvg which these days requires rust)
use imagemagick_light with support for libtiff added.
These (outdated) derivations are only used by nixos/lib/testing.nix.
If we want to provide jquery & jquery-ui packages this is better done
in nodePackages.
Among other things, this will allow *2nix tools to output plain data
while still being composable with the traditional
callPackage/.override interfaces.
- Add a new parameter `imageType` that can specify either "efi" or
"legacy" (the default which should see no change in behaviour by
this patch).
- EFI images get a GPT partition table (instead of msdos) with a
mandatory ESP partition (so we add an assert that `partitioned`
is true).
- Use the partx tool from util-linux to determine exact start + size
of the root partition. This is required because GPT stores a secondary
partition table at the end of the disk, so we can't just have
mkfs.ext4 create the filesystem until the end of the disk.
- (Unrelated to any EFI changes) Since we're depending on the
`-E offset=X` option to mkfs which is only supported by e2fsprogs,
disallow any attempts of creating partitioned disk images where
the root filesystem is not ext4.
It is quite complicated to test services using the test-driver when
declaring user services with `systemd.user.services` such as many
X11-based services like `xautolock.service`.
This change adds an optional `$user` parameter to each systemd-related
function in the test-driver and runs `systemctl --user` commands using
`su -l $user -c ...` and sets the `XDG_RUNTIME_DIR` variable
accordingly and a new function named `systemctl` which is able to run a
systemd command with or without a specified user.
The change can be confirmed with a simple VM declaration like this:
```
import ./nixos/tests/make-test.nix ({ pkgs, lib }:
with lib;
{
name = "systemd-user-test";
nodes.machine = {
imports = [ ./nixos/tests/common/user-account.nix ];
services.xserver.enable = true;
services.xserver.displayManager.auto.enable = true;
services.xserver.displayManager.auto.user = "bob";
services.xserver.xautolock.enable = true;
};
testScript = ''
$machine->start;
$machine->waitForX;
$machine->waitForUnit("xautolock.service", "bob");
$machine->stopJob("xautolock.service", "bob");
$machine->startJob("xautolock.service", "bob");
$machine->systemctl("list-jobs --no-pager", "bob");
$machine->systemctl("show 'xautolock.service' --no-pager", "bob");
'';
})
```
Fakeroot seems to always give the owner write bit to any files touched
inside it (presumably to easily simulate the fact that root can still
modify such files). So do an explicit chmod to remove them.
This should finally solve #32242 after the EC2 images are regenerated
with this change.
https://hydra.nixos.org/build/66143116
This fixes #28768 because during an image build, Nix sees bad store
timestamps and attempts to fix them, but can't fix them on a running
system (due to being inside a builder). Since timestamps on the store
are supposed to be 1 anyway, if we fix this, that fixes image building
inside booted images made this way.
Note that this adds quite a bit of noise to the output, because running
`cptofs` under `faketime` causes a bunch of seemingly spurious error
messages and my attempts to suppress them all failed. We'll fix it when
`cptofs` gets a native timestamp preservation feature.
-s, --script: never prompts for user intervention
Sometimes the NixOS installer tests fail when they invoke parted, e.g.
https://hydra.nixos.org/build/62513826/nixlog/1. But instead of exiting
right there, the tests hang until the Nix builder times out (and kills
the build). With this change the tests would instead fail immediately,
which is preferred.
While at it, use "parted --script" treewide, so nobody gets build
timeout due to parted error (or misuse). (Only nixos/ use it, and only
non-interactive.)
A few instances already use the short option "-s", convert them to long
option "--short".
Regression introduced by a02bb00156.
The fix is done by disabling writableStore, because the latter will set
up an overlayfs on the Nix store within the VM, which in turn will
discard all the outputs of the resulting output path.
However in runInMachine we actually *want* the contents of the generated
path and also don't want a writable store within the VM (except of
course for $out, which is writable anyway).
I've added a small regression test to verifify the output in
nixos/tests/run-in-machine.nix to make sure this won't break again in
the future.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This version should have more conventional regexes that work across many
platforms and regex engines. This is an issue because up until Nix 1.11,
Nix called out to the libc regex matcher, which behaved differently on
Darwin and Linux. And in Nix 1.12, we're moving to std::regex which will
also behave differently here.
And yes, I do actually evaluate make-disk-image.nix on Darwin ;)
machine: must succeed: xwininfo -root -tree | sed 's/.*0x[0-9a-f]* \"\([^\"]*\)\".*/\1/; t; d'
machine: exit status 0
machine: Last chance to match /(?^:dfiirst configuration)/ on the the window list, which currently contains:
machine: [i3 con] container around 0xf8a5f0, i3: first configuration, [i3 con] floatingcon around 0xf8c260, [i3 con] container around 0xf8a380, i3bar for output Virtual-1, [i3 con] bottom dockarea Virtual-1, [i3 con] workspace 1, [i3 con] content Virtual-1, [i3 con] top dockarea Virtual-1, [i3 con] output Virtual-1, [i3 con] workspace __i3_scratch, [i3 con] content __i3, [i3 con] pseudo-output __i3, i3
machine: Last chance to match /(?^:BALICE)/ on the screen, which currently contains:
machine: performing optical character recognition
machine: sending monitor command: screendump /tmp/nix-build-vm-test-run-sddm.drv-0/ocrin.ppm
machine: Session Layout
O O
0 1 : 0 9
Wednesday, June 21, 2017
|_ I
Select your user and enter password
If the test has not passed yet, on the last attempt it now outputs:
machine: Last chance to match /logine: / on TTY2, which currently contains:
machine: running command: fold -w$(stty -F /dev/tty2 size | awk '{print $2}') /dev/vcs2
machine: exit status 0
machine:
<<< Welcome to NixOS 17.09.git.a804ef4 (x86_64) - tty2 >>>
machine login:
to help debug the problem. Notice the "logine" typo in my check.
This changes much of the make-disk-image.nix logic (and thus most NixOS
image building) to use LKL to set up the target directory structure rather
than a Linux VM. The only work we still do in a VM is less IO-heavy stuff
that while still time-consuming, is less of the overall load. The goal is
to kill more of that stuff, but that will require deeper changes to NixOS
activation scripts and switch-to-configuration.pl, and I don't want to
bite off too much at once.
First of all, we're now using ImageMagick to improve the screenshot so
that Tesseract has an esier time to recognize the text. The resulting
image of this post-processing is a scaled up black-and-white version
with the backgrounds almost entirely removed and the text edges a bit
blurred, so the screen shots now more or less resemble an image from a
scanner rather. This is what Tesseract is trained for by default.
As mentioned in the previous commit we now also use Tesseract 4, which
further improves the quality of text recognition.
I've spent countless hours just to test different postprocessing
variants and testing what works best for our tests and this is the one
that worked best so far. It's certainly not perfect and I'd like to
avoid the scaling step but we're way better off than before.
In addition to this, the OCR process is now done without an intermediate
file, solely using pipes.
I've tested this using the following VM tests which have OCR enabled:
* nixos/tests/chromium.nix -A stable
* nixos/tests/emacs-daemon.nix
* nixos/tests/installer.nix -A luksroot
* nixos/tests/lightdm.nix
* nixos/tests/plasma5.nix
* nixos/tests/sddm.nix
All of the tests still succeed and comparing some of the recognition
results to the earlier results it now also detects a lot more text than
before this commit.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
I've removed that attribute in 68bc260ca2,
because the language files no longer were distributed as seperate files,
but if we for example only want to use the English training data, the
closure size of Tesseract gets quite large (around 1.2 GB), which is a
bit much just to be able to run NixOS VM tests.
For this reason I've also switched the VM tests back to using only the
English language.
Tested using the following VM tests (the ones that have OCR enabled) on
x86_64-linux:
* nixos/tests/chromium.nix -A stable
* nixos/tests/emacs-daemon.nix
* nixos/tests/installer.nix -A luksroot
* nixos/tests/lightdm.nix
* nixos/tests/plasma5.nix
* nixos/tests/sddm.nix
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This makes make-disk-image.nix slightly more consistent with other image
builders we have. Unfortunately I duplicated some code in doing so, but
this is temporary duplication on the path to consolidating everything.
See https://github.com/NixOS/nixpkgs/issues/23052 for more details on that.
I'm also exposing the option in the amazon-image.nix maintainer module.
A long-time issue and one of the reasons I've never used that function
before. So let's remove that todo-comment and escape the contents
properly.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @edolstra
`configuration` seems to be a reference to an argument that was
removed seven years ago in commit 2892aed7.
`configuration.nix` makes it a big more clear what we're referring to.
Ensure that archive members are added in sorted order with a fixed
mtime. This allows `nix-build --check` to succeed (when building a
tarball of a simple system configuration).
We also remove env-vars which doesn't appear to do much apart from
capture a bunch of store paths we probably don't want.
This is an alternative to
4b78a5b5fb
Previously we were using two or three (qemu_kvm, qemu_test, and
qemu_test with a different dbus when minimal.nix is included).
(cherry picked from commit 8bfa4ce82e)
From the upstream changelog:
* Tesseract development is now done with Git and hosted at github.com
(Previously we used Subversion as a VCS and code.google.com for
hosting).
So let's move over to the GitHub repository, where the organisation also
includes a full repository for tessdata, so we no longer need to fetch
it one-by-one.
The build also got significantly simpler, because we no longer need to
run autoconf, neither do we need to patch the configure script for
Leptonica headers.
This also has the advantage that we don't need to use the
enableLanguages attribute for the test runner anymore.
Full upstream changelog can be found at:
https://github.com/tesseract-ocr/tesseract/blob/c4d273d33cc36e/ChangeLog
Tested against all NixOS tests with enabled OCR (chromium, emacs-daemon,
installer.luksroot and lightdm).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @viric
tune2fs marks the filesystem as clean to prevent resize2fs from
complaining.
But we were invoking it before we mounted the filesystem, so the
counters would increase to 1 and it broke the functionality.
By moving the call after the mount, I have confirmed it works by:
$ nix-build nixos/tests/ec2.nix
cc @rbvermaa @edolstra
Regression introduced by 4dcb685af9.
Unsetting the environment variable shortly before using it is not going
to end up very well, so let's just filter out the variable from the
output of export and unset it shortly afterwards.
This fixes the runInMachine NixOS test.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
- Replace hand-rolled version of nixos-install in make-disk-image by an
actual call to nixos-install
- Required a few cleanups of nixos-install
- nixos-install invokes an activation script which the hand-rolled version
in make-disk-image did not do. We remove /etc/machine-id as that's
a host-specific, impure, output of the activation script
Testing:
nix-build '<nixpkgs/nixos/release.nix>' -A tests.installer.simple passes
Also tried generating an image with:
nix-build -E 'let
pkgs = import <nixpkgs> {};
lib = pkgs.lib;
nixos = import <nixpkgs/nixos> {
configuration = {
fileSystems."/".device = "/dev/disk/by-label/nixos";
boot.loader.grub.devices = [ "/dev/sda" ];
boot.loader.grub.extraEntries = '"''"'
menuentry "Ubuntu" {
insmod ext2
search --set=root --label ubuntu
configfile /boot/grub/grub.cfg
}
'"''"';
};
};
in import <nixpkgs/nixos/lib/make-disk-image.nix> {
inherit pkgs lib;
config = nixos.config;
diskSize = 2000;
partitioned = false;
installBootLoader = false;
}'
Then installed the image:
$ sudo df if=./result/nixos.img of=/dev/sdaX bs=1M
$ sudo resize2fs /dev/disk/by-label/nixos
$ sudo mount /dev/disk/by-label/nixos /mnt
$ sudo mount --rbind /proc /mnt/proc
$ sudo mount --rbind /dev /mnt/dev
$ sudo chroot /mnt /nix/var/nix/profiles/system/bin/switch-to-configuration boot
[ … optionally do something about passwords … ]
and successfully rebooted to that image.
Was doing all this from inside a Ubuntu VM with a single user nix install.
