* acquire DHCP on the interfaces with networking.interface.$name.useDHCP == true or on all interfaces if networking.useDHCP == true (was only only "eth0")
* respect "mtu" if it was in DHCP answer (it happens in the wild)
* acquire and set up staticroutes (unlike others clients, udhcpc does not do the query by default); this supersedes https://github.com/NixOS/nixpkgs/pull/41829
This fixes an issue with shells like fish that are not fully POSIX
compliant. The syntax `ENV=val cmd' doesn't work properly in there.
This issue has been addressed in #45932 and #45945, however it has been
recommended to use a single shell (`stdenv.shell' which is either
`bash' or `sh') to significantly reduce the maintenance overload in the
future.
See https://github.com/NixOS/nixpkgs/issues/45897#issuecomment-417923464
Fixes #45897
/cc @FRidh @xaverdh @etu
Although double '/' in paths is not a problem for GRUB supplied with nixpkgs, sometimes NixOS's grub.conf read by external GRUB and there are versions of GRUB which fail
The instructions to install nixos behind a proxy were not clear. While
one could guess that setting http_proxy variables can get the install
rolling, one could end up with an installed system where the proxy
settings for the nix-daemon are not configured.
This commit updates the documentation with
1. steps to install behind a proxy
2. configure the global proxy settings so that nix-daemon can access
internet.
3. Pointers to use nesting.clone in case one has to use different proxy
settings on different networks.
The background color option is self-explanatory.
The mode is either `normal` or `stretch`, they are as defined by GRUB,
where normal will put the image in the top-left corner of the menu, and
stretch is the default, where it stretches the image without
consideration for the aspect ratio.
* https://www.gnu.org/software/grub/manual/grub/grub.html#background_005fimage
When rebuilding you have to manually run `systemctl --user
daemon-reload`. It gathers all authenticated users using
`loginctl list-user` and runs `daemon-reload` for each of them.
This is a first step towards a `nixos-rebuild` which is able to reload
user units from systemd. The entire task is fairly hard, however I
consider this patch usable as it allows to restart units without running
`daemon-reload` for each authenticated user.
This fixes an issue where setting both
`boot.loader.systemd-boot.editor` to `false` and
`boot.loader.systemd-boot.consoleMode` to any value would concatenate
the two configuration lines in the output, resulting in an invalid
`loader.conf`.
From reading the source I'm pretty sure it doesn't support multiple Yubikeys, hence
those options are useless.
Also, I'm pretty sure nobody actually uses this feature, because enabling it causes
extra utils' checks to fail (even before applying any patches of this branch).
As I don't have the hardware to test this, I'm too lazy to fix the utils, but
I did test that with extra utils checks commented out and Yubikey
enabled the resulting script still passes the syntax check.
Also reuse common cryptsetup invocation subexpressions.
- Passphrase reading is done via the shell now, not by cryptsetup.
This way the same passphrase can be reused between cryptsetup
invocations, which this module now tries to do by default (can be
disabled).
- Number of retries is now infinity, it makes no sense to make users
reboot when they fail to type in their passphrase.
This allows a developer to better identify in which snippet the
failure happened. Furthermore, users seeking help will have more
information available about the failure.
Problem: Restarting (stopping) system.slice would not only stop X11 but
also most system units/services. We obviously don't want this happening
to users when they switch from 18.03 to 18.09 or nixos-unstable.
Reason: The following change in systemd:
d8e5a93382
The commit adds system.slice to the perpetual units, which means
removing the unit file and adding it to the source code. This is done so
that system.slice can't be stopped anymore but in our case it ironically
would cause this script to stop system.slice because the unit file was
removed (and an older systemd version is still running).
Related issue: https://github.com/NixOS/nixpkgs/issues/39791
Rather than special-casing the dns options in networkmanager.nix, use
the module system to let unbound and systemd-resolved contribute to
the newtorkmanager config.
find-libs is currently choking when it finds the dynamic linker
as a DT_NEEDED dependency (from glibc) and bails out like this
(as glibc doesn't have a RPATH):
Couldn't satisfy dependency ld-linux-x86-64.so.2
Actually the caller of find-libs ignores the exit status, so the issue
almost always goes unnoticed and happens to work by chance. But
additionally what happens is that indirect .so dependencies are
left out from the dependency closure calculation, which breaks
latest cryptsetup as libssl.so isn't found anymore.
F2FS is used on Raspberry Pi-like devices to enhance SD card performance. Allowing F2FS resizing would help in automatic deploying of SD card images without a Linux box to resize the file system offline.
This has been reported by @qknight in his Stack Overflow question:
https://stackoverflow.com/q/50678639
The correct way to override a single value would be to use something
like this:
systemd.services.nagios.serviceConfig.Restart = lib.mkForce "no";
However, this doesn't work because the check is applied for the attrsOf
type and thus the attribute values might still contain the attribute set
created by mkOverride.
The unitOption type however did already account for this, but at this
stage it's already too late.
So now the actual value is unpacked while checking the values of the
attribute set, which should allow us to override values in
serviceConfig.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @edolstra, @qknight
When a package contains a directory in one of the systemd directories
(like flatpak does), it is symlinked into the *-units derivation.
Then later, the derivation will try to create the directory, which
will fail:
mkdir: cannot create directory '/nix/store/…-user-units/dbus.service.d': File exists
builder for '/nix/store/…-user-units.drv' failed with exit code 1
Closes: #33233
GRUB 2.0 supports png, jpeg and tga. This will use the image's suffix to
load the right module.
As jpeg module is named jpeg, jpg is renamed jpeg.
If the user uses wrong image suffix for an image, it wouldn't work anyway.
This will leave up to two additional left-over files in /boot/ if user switches
through all the supported file formats. The module already left the png
image if the user disabled the splash image.
This is apparent from the service file directory in plymouth:
├── multi-user.target.wants
│ ├── plymouth-quit.service -> ../plymouth-quit.service
│ └── plymouth-quit-wait.service -> ../plymouth-quit-wait.service
Leaving it unspecified caused gdm-wayland to crash on boot, see #39615.
The change made other display managers not quit plymouth properly however. By
removing "multi-user.target" from `plymouth-quit.after` this is resolved.
The isKexecable flag treated Linux without kexec as just a normal
variant, when it really should be treated as a special case incurring
complexity debt to support.
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):
pkgs/development/libraries/epoxy/default.nix
pkgs/development/libraries/gtk+/3.x.nix
pkgs/development/python-modules/asgiref/default.nix
pkgs/development/python-modules/daphne/default.nix
pkgs/os-specific/linux/systemd/default.nix
This can be used to fix issues where udhcpc times out before
acquiring a lease. For example of these issues, see:
https://bugs.alpinelinux.org/issues/3105#note-8
Signed-off-by: Dino A. Dai Zovi <ddz@theta44.org>
At one point in my configuration I had:
boot.kernel.sysctl = {
# https://unix.stackexchange.com/questions/13019/description-of-kernel-printk-values
"kernel.printk" = "4 4 1 7";
};
which triggered:
error: The unique option `boot.kernel.sysctl.kernel.printk' is defined multiple times, in `/home/teto/dotfiles/nixpkgs/mptcp-unstable.nix' and `/home/teto/nixpkgs/nixos/modules/system/boot/kernel.nix'.
(use ‘--show-trace’ to show detailed location information)
Traceback (most recent call last):
File "/home/teto/nixops/scripts/nixops", line 984, in <module>
args.op()
File "/home/teto/nixops/scripts/nixops", line 406, in op_deploy
max_concurrent_activate=args.max_concurrent_activate)
File "/home/teto/nixops/nixops/deployment.py", line 1045, in deploy
self.run_with_notify('deploy', lambda: self._deploy(**kwargs))
File "/home/teto/nixops/nixops/deployment.py", line 1034, in run_with_notify
f()
File "/home/teto/nixops/nixops/deployment.py", line 1045, in <lambda>
self.run_with_notify('deploy', lambda: self._deploy(**kwargs))
File "/home/teto/nixops/nixops/deployment.py", line 985, in _deploy
self.configs_path = self.build_configs(dry_run=dry_run, repair=repair, include=include, exclude=exclude)
File "/home/teto/nixops/nixops/deployment.py", line 653, in build_configs
raise Exception("unable to build all machine configurations")
Exception: unable to build all machine configurations
This simple addition allows to override it.
