This config is removed when removing[1] fonts.fontconfig.hinting.style
option.
However, when adding[2] that option back, this config is missing.
[1]: 65592837b6
[2]: 659096dd89
Long story short: the SSH agent protocol doesn't support telling from
which tty the request is coming from, so the the pinentry curses prompt
appears on the login tty and messes up the output and may hang.
The current trick to workaround this is informing the gnupg agent every
time you start a shell: this assumes you will run `ssh` in the latest
tty, if you don't the latest tty will be messed up this time.
The ideal solution would be updating the tty exactly when (and where)
you run `ssh`. This is actually possible using a catch-all Match block
in ssh_config and using the `exec` feature that hooks a command to the
current shell.
Source for the new trick: https://unix.stackexchange.com/a/499133/110465
no change in rendered output. the html manual could render <screen>
blocks differently, but so far it hasn't (and if we need to make a
distinction we can use a special info string).
leaving some newlines around after an admonition was closed causes the
newline rule to match, which in turn inserts literallayout newlines into
te xml output. that's not what we want.
this notable also now interprets a markdown-flavored list in
triton_sd_config as actual markdown and renders it differently, but this
is arguably for the better (and probably the original intention).
no other rendering changes.
there seems to be a lot of markdown in the prometheus module that
should've been docbook instead. temporarily convert it to docbook to
keep the diff for the docbook->md conversion of prometheus inspectable.
Due to how complex minecraft world generation has gotten in recent
years, it now can take several minutes to complete the first generation
of a world seed, even on relatively new and powerful hardware.
We are testing if a minecraft server can run inside of a nix enviroment,
and not so much about stress testing the CI.
Test running before this change:
> (finished: waiting for TCP port 43000, in 118.49 seconds)
Test running with this change:
> (finished: waiting for TCP port 43000, in 27.88 seconds)
Choice of using `level-type` and `generate-structures` was made as they
support almost every version of minecraft. These two also make it
extremely clear what it does, compared to the more complex
`generator-settings` and all its toggles.
When `nix.registry.<name>.flake` option is used, additional attributes of the flake were not written to the flake registry file because of a missing parenthesis.
in [v0.25.0][1]: Breaking changes of Task API (relevant summarized)
- `update` -> `task`
- `GET - /indexes/:indexUid/updates/:updateId` -> `/indexes/:indexUid/tasks`
- `updateId` -> `uid` of `task`
- also: new `GET - /tasks/:taskUid` introduced
- `status` values changed
in [v0.28.0][2]: Breaking changes in `/indexes` endpoints
- `total` now appear in the response body
[1]: https://github.com/meilisearch/meilisearch/releases/tag/v0.25.0
[2]: https://github.com/meilisearch/meilisearch/releases/tag/v0.28.0
#167013 introduced a property conflict with the concurrently-written commit
aea940da63, over property
systemd.services.prosody. Fix this by moving the reload option into the block.
This option is based on a recommendation from a page last updated in
2014 (see https://www.freedesktop.org/wiki/Software/Glamor/), and it
is not necessary anymore.
Also, it did the wrong thing: it forced DRI2, but Glamor should also
work with DRI3, that is a better option most of the time. So let's
remove this option, folks that still want to force this manually can do
so in other ways.
The split of Ethereum into Execution Layer and Consensus Layer adds a
requirement for communication between execution client and consensus
client using secur JWT tokens. In Geth this is configurable using the
`--authrpc.*` CLI flags which are currently not exposed by this service.
For more details read the following article:
https://geth.ethereum.org/docs/interface/consensus-clients
Signed-off-by: Jakub Sokołowski <jakub@status.im>
These are now required otherwise startup fails with:
> TypeError: 'NoneType' object is not subscriptable
The chosen levels are stricter than default but don't require unsupported signing or DB editing so seem like a reasonable high bar for now. It is easy for users to lower the levels so it is better to be stricter by default.
Default levels: 0ce0588725/mautrix_facebook/example-config.yaml (L247-L263)
This make the process of applying overlays more reliable by:
1. Ignoring dtb files that are not really device trees. [^1]
2. Adding a `filter` option (per-overlay, there already is a global one)
to limit the files to which the overlay applies. This is useful
in cases where the `compatible` string is ambiguous and multiple
unrelated files match.
Previously the script would fail in both cases.
[^1]: For example, there is dtbs/overlays/overlay_map.dtb in the
Raspberry Pi 1 kernel.
using regular strings works well for docbook because docbook is not as
whitespace-sensitive as markdown. markdown would render all of these as
code blocks when given the chance.
a lot of markdown syntax has already snuck into option docs, many of it
predating the intent to migrate to markdown. we don't convert all of it
here, just that which is accompanied by docbook tags as well. the rest
can be converted by simply adding the mdDoc marker.
this renders the same in the manpage and a little more clearly in the
html manual. in the manpage there continues to be no distinction from
regular text, the html manual gets code-type markup (which was probably
the intention for most of these uses anyway).
In version 1.5.5 of fwupd the uefi plugin was renamed to
uefi-capsule. As part of those changes the configuration file was
renamed and changed.
This modules configuration mismatch was generally hidden because
when udisks2 is enabled fwupd will use that instead. Without
udisks2 the following warning is seen:
WARNING: UEFI ESP partition not detected or configured
While it might seem odd, 0.0.0.0/0 or ::/0 gateways are valid and
commonly used on point-to-point links (e.g. a wireguard tunnel) to
indicate that all traffic needs to be sent to a given interface.
systemd-networkd actually documents this as a valid configuration in its
man pages [1].
Tested to do the right thing in one of my NixOS containers using
a Wireguard tunnel as its default route.
[1] https://www.freedesktop.org/software/systemd/man/systemd.network.html#DefaultRouteOnDevice=
This does make the out-of-the-box install perhaps a bit worse, since
networking may need to be manually configured. However, it makes it less
frustrating that upon every start of this service, a *removed* autostart
network will be re-added when removed by the user. See
https://github.com/NixOS/nixpkgs/issues/73418 for details.
Behavior from other distros:
- Adds autostart net on install: Fedora
- Does not add autostart net : Debian, Arch
This does not break any existing installs since it does not affect any
autostart network already in-place.
Enable keter module
Keter is an apploader which:
1. has the old app running on a port.
2. loads a new one, and wait for that to complete
3. switches the old with the new one once the new one finished loading.
It supports more functionality but this use case
is the primary one being used by supercede.
Adds keter as a module to nixos.
Currently keter is unusable with nix,
because it relies on bundeling of a tar and uploading that to a specific folder.
These expressions automate these devops tasks,
with especially nixops in mind.
This will work with versions above 1.8
The test seems to work.
This uses a new version of keter which has good
support for status code on error pages.
We're using this config at production at supercede
so it should be fine.
Squash log:
==========
mention keter in changelog
Update generated release notes
Always restart keter on failure
This is a little bit of extra stability in case keter crashes.
Which can happen under extreme conditions (DoS attacks).
Update nixos/doc/manual/release-notes/rl-2205.section.md
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Update nixos/modules/module-list.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Remove sanitization
don't put domain in as a string
Update nixos/tests/keter.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
add jappie as module maintainer
Use type path instead of two seperate options
Fix generated docs
added test machinery to figure out why it's failing
Fix the test, use console output
run nixpkgs-fmt on all modules
Inline config file.
This get's rid of a lot of inderection as well.
Run nix format
remove comment
simplify executable for test
delete config file
add config for keter root
Remove after redis clause
set keter root by default to /var/lib/keter
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
fix nit
add newlines
add default text and move description in a long description
Delete rather obvious comment
fix release db thing
remove longDescription and put it in a comment instead
change description of mkEnalbeOption
explain what keter does by using the hackage synopsis
set domain to keterDomain and same for executable
move comment to where it's happening
fix type error
add formatting better comment
try add seperate user for keter
Revert "try add seperate user for keter"
This reverts commit d3522d36c96117335bfa072e6f453406c244e940.
Doing this breaks the setup
set default to avoid needing cap_net_bind_service
remove weird comment
use example fields
eleborated on process leakage
Update nixos/modules/services/web-servers/keter/default.nix
Co-authored-by: ckie <25263210+ckiee@users.noreply.github.com>
run nixpkgs-fmt
update docs
Fix formatting, set keter package by default
format our little nixexpr
replace '' -> " where possible
drop indent for multiline string
make description much shorter
regen docs database
Introduced by fd7d901133. The openldap
module now expects the database directory to be below
`/var/lib/openldap`, oterhwise it'll fail evaluation like this:
Failed assertions:
- Database dc=example,dc=org has `olcDbDirectory` (/var/db/openldap) that is not a subdirectory of
`/var/lib/openldap/`.
Other popular distros (OpenSuse, Ubuntu, Gentoo, Arch) read $HOME/.profile when starting X11 display managers.
When moving to nixOS, that is then broken leading to unpredictable behavior (probably programs not working).
This adds similar behavior to https://github.com/sddm/sddm/blob/develop/data/scripts/Xsession
Related to #185979
