mirrors/nixpkgs
1
0
Fork 1
mirror of https://github.com/NixOS/nixpkgs.git synced 2024-12-25 03:17:13 +00:00
Code Issues Wiki Activity
nixpkgs/nixos/doc/manual/release-notes/rl-2009.xml
Michael Weiss 234d95a6fc
nixos/networking: Add the FQDN and hostname to /etc/hosts 
This fixes the output of "hostname --fqdn" (previously the domain name
was not appended). Additionally it's now possible to use the FQDN.

This works by unconditionally adding two entries to /etc/hosts:
127.0.0.1 localhost
::1 localhost

These are the first two entries and therefore gethostbyaddr() will
always resolve "127.0.0.1" and "::1" back to "localhost" [0].
This works because nscd (or rather the nss-files module) returns the
first matching row from /etc/hosts (and ignores the rest).

The FQDN and hostname entries are appended later to /etc/hosts, e.g.:
127.0.0.2 nixos-unstable.test.tld nixos-unstable
::1 nixos-unstable.test.tld nixos-unstable
Note: We use 127.0.0.2 here to follow nss-myhostname (systemd) as close
as possible. This has the advantage that 127.0.0.2 can be resolved back
to the FQDN but also the drawback that applications that only listen to
127.0.0.1 (and not additionally ::1) cannot be reached via the FQDN.
If you would like this to work you can use the following configuration:
```nix
networking.hosts."127.0.0.1" = [
  "${config.networking.hostName}.${config.networking.domain}"
  config.networking.hostName
];
```

Therefore gethostbyname() resolves "nixos-unstable" to the FQDN
(canonical name): "nixos-unstable.test.tld".

Advantages over the previous behaviour:
- The FQDN will now also be resolved correctly (the entry was missing).
- E.g. the command "hostname --fqdn" will now work as expected.
Drawbacks:
- Overrides entries form the DNS (an issue if e.g. $FQDN should resolve
  to the public IP address instead of 127.0.0.1)
  - Note: This was already partly an issue as there's an entry for
    $HOSTNAME (without the domain part) that resolves to
    127.0.1.1 (!= 127.0.0.1).
- Unknown (could potentially cause other unexpected issues, but special
  care was taken).

[0]: Some applications do apparently depend on this behaviour (see
c578924) and this is typically the expected behaviour.

Co-authored-by: Florian Klink <flokli@flokli.de>
2020-05-25 14:06:25 +02:00

497 lines
20 KiB
XML
Raw Blame History

<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09">
<title>Release 20.09 (“Nightingale”, 2020.09/??)</title>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09-highlights">
<title>Highlights</title>
<para>
In addition to numerous new and upgraded packages, this release has the
following highlights:
</para>
<itemizedlist>
<listitem>
<para>
Support is planned until the end of April 2021, handing over to 21.03.
</para>
</listitem>
<listitem>
<para>GNOME desktop environment was upgraded to 3.36, see its <link xlink:href="https://help.gnome.org/misc/release-notes/3.36/">release notes</link>.</para>
</listitem>
<listitem>
<para>
<package>maxx</package> package removed along with <varname>services.xserver.desktopManager.maxx</varname> module.
Please migrate to <package>cdesktopenv</package> and <varname>services.xserver.desktopManager.cde</varname> module.
</para>
</listitem>
<listitem>
<para>
We now distribute a GNOME ISO.
</para>
</listitem>
<listitem>
<para>
PHP now defaults to PHP 7.4, updated from 7.3.
</para>
</listitem>
<listitem>
<para>
Two new options, <link linkend="opt-services.openssh.authorizedKeysCommand">authorizedKeysCommand</link>
and <link linkend="opt-services.openssh.authorizedKeysCommandUser">authorizedKeysCommandUser</link>, have
been added to the <literal>openssh</literal> module. If you have <literal>AuthorizedKeysCommand</literal>
in your <link linkend="opt-services.openssh.extraConfig">services.openssh.extraConfig</link> you should
make use of these new options instead.
</para>
</listitem>
<listitem>
<para>
There is a new module for Podman(<varname>virtualisation.podman</varname>), a drop-in replacement for the Docker command line.
</para>
</listitem>
<listitem>
<para>
The new <varname>virtualisation.containers</varname> module manages configuration shared by the CRI-O and Podman modules.
</para>
</listitem>
<listitem>
<para>
Declarative Docker containers are renamed from <varname>docker-containers</varname> to <varname>virtualisation.oci-containers.containers</varname>.
This is to make it possible to use <literal>podman</literal> instead of <literal>docker</literal>.
</para>
</listitem>
<listitem>
<para>
MariaDB has been updated to 10.4, MariaDB Galera to 26.4.
Before you upgrade, it would be best to take a backup of your database.
For MariaDB Galera Cluster, see <link xlink:href="https://mariadb.com/kb/en/upgrading-from-mariadb-103-to-mariadb-104-with-galera-cluster/">Upgrading
from MariaDB 10.3 to MariaDB 10.4 with Galera Cluster</link> instead.
Before doing the upgrade read <link xlink:href="https://mariadb.com/kb/en/upgrading-from-mariadb-103-to-mariadb-104/#incompatible-changes-between-103-and-104">Incompatible
Changes Between 10.3 and 10.4</link>.
After the upgrade you will need to run <literal>mysql_upgrade</literal>.
MariaDB 10.4 introduces a number of changes to the authentication process, intended to make things easier and more
intuitive. See <link xlink:href="https://mariadb.com/kb/en/authentication-from-mariadb-104/">Authentication from MariaDB 10.4</link>.
unix_socket auth plugin does not use a password, and uses the connecting user's UID instead. When a new MariaDB data directory is initialized, two MariaDB users are
created and can be used with new unix_socket auth plugin, as well as traditional mysql_native_password plugin: root@localhost and mysql@localhost. To actually use
the traditional mysql_native_password plugin method, one must run the following:
<programlisting>
services.mysql.initialScript = pkgs.writeText "mariadb-init.sql" ''
ALTER USER root@localhost IDENTIFIED VIA mysql_native_password USING PASSWORD("verysecret");
'';
</programlisting>
When MariaDB data directory is just upgraded (not initialized), the users are not created or modified.
</para>
</listitem>
</itemizedlist>
</section>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09-new-services">
<title>New Services</title>
<para>
The following new services were added since the last release:
</para>
<itemizedlist>
<listitem>
<para>
There is a new <xref linkend="opt-security.doas.enable"/> module that provides <command>doas</command>, a lighter alternative to <command>sudo</command> with many of the same features.
</para>
</listitem>
</itemizedlist>
</section>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09-incompatibilities">
<title>Backward Incompatibilities</title>
<para>
When upgrading from a previous release, please be aware of the following
incompatible changes:
</para>
<itemizedlist>
<listitem>
<para>
<literal>buildGoModule</literal> now internally creates a vendor directory
in the source tree for downloaded modules instead of using go's <link
xlink:href="https://golang.org/cmd/go/#hdr-Module_proxy_protocol">module
proxy protocol</link>. This storage format is simpler and therefore less
likekly to break with future versions of go. As a result
<literal>buildGoModule</literal> switched from
<literal>modSha256</literal> to the <literal>vendorSha256</literal>
attribute to pin fetched version data. <literal>buildGoModule</literal>
still accepts <literal>modSha256</literal> with a warning, but support will
be removed in the next release.
</para>
</listitem>
<listitem>
<para>
Grafana is now built without support for phantomjs by default. Phantomjs support has been
<link xlink:href="https://grafana.com/docs/grafana/latest/guides/whats-new-in-v6-4/">deprecated in Grafana</link>
and the <package>phantomjs</package> project is
<link xlink:href="https://github.com/ariya/phantomjs/issues/15344#issue-302015362">currently unmaintained</link>.
It can still be enabled by providing <literal>phantomJsSupport = true</literal> to the package instanciation:
<programlisting>{
services.grafana.package = pkgs.grafana.overrideAttrs (oldAttrs: rec {
phantomJsSupport = false;
});
}</programlisting>
</para>
</listitem>
<listitem>
<para>
The <link linkend="opt-services.supybot.enable">supybot</link> module now uses <literal>/var/lib/supybot</literal>
as its default <link linkend="opt-services.supybot.stateDir">stateDir</link> path if <literal>stateVersion</literal>
is 20.09 or higher. It also enables number of
<link xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.exec.html#Sandboxing">systemd sandboxing options</link>
which may possibly interfere with some plugins. If this is the case you can disable the options through attributes in
<option>systemd.services.supybot.serviceConfig</option>.
</para>
</listitem>
<listitem>
<para>
The <literal>security.duosec.skey</literal> option, which stored a secret in the
nix store, has been replaced by a new
<link linkend="opt-security.duosec.secretKeyFile">security.duosec.secretKeyFile</link>
option for better security.
</para>
<para>
<literal>security.duosec.ikey</literal> has been renamed to
<link linkend="opt-security.duosec.integrationKey">security.duosec.integrationKey</link>.
</para>
</listitem>
<listitem>
<para>
The initrd SSH support now uses OpenSSH rather than Dropbear to
allow the use of Ed25519 keys and other OpenSSH-specific
functionality. Host keys must now be in the OpenSSH format, and at
least one pre-generated key must be specified.
</para>
<para>
If you used the <option>boot.initrd.network.ssh.host*Key</option>
options, you'll get an error explaining how to convert your host
keys and migrate to the new
<option>boot.initrd.network.ssh.hostKeys</option> option.
Otherwise, if you don't have any host keys set, you'll need to
generate some; see the <option>hostKeys</option> option
documentation for instructions.
</para>
</listitem>
<listitem>
<para>
Since this release there's an easy way to customize your PHP
install to get a much smaller base PHP with only wanted
extensions enabled. See the following snippet installing a
smaller PHP with the extensions <literal>imagick</literal>,
<literal>opcache</literal>, <literal>pdo</literal> and
<literal>pdo_mysql</literal> loaded:
<programlisting>
environment.systemPackages = [
(pkgs.php.withExtensions
({ all, ... }: with all; [
imagick
opcache
pdo
pdo_mysql
])
)
];</programlisting>
The default <literal>php</literal> attribute hasn't lost any
extensions. The <literal>opcache</literal> extension has been
added.
All upstream PHP extensions are available under <package><![CDATA[php.extensions.<name?>]]></package>.
</para>
<para>
All PHP <literal>config</literal> flags have been removed for
the following reasons:
<itemizedlist>
<listitem>
<para>
The updated <literal>php</literal> attribute is now easily
customizable to your liking by using
<literal>php.withExtensions</literal> or
<literal>php.buildEnv</literal> instead of writing config files
or changing configure flags.
</para>
</listitem>
<listitem>
<para>
The remaining configuration flags can now be set directly on
the <literal>php</literal> attribute. For example, instead of
<programlisting>
php.override {
config.php.embed = true;
config.php.apxs2 = false;
}
</programlisting>
you should now write
<programlisting>
php.override {
embedSupport = true;
apxs2Support = false;
}
</programlisting>
</para>
</listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>
Gollum received a major update to version 5.x and you may have to change
some links in your wiki when migrating from gollum 4.x. More information
can be found
<link xlink:href="https://github.com/gollum/gollum/wiki/5.0-release-notes#migrating-your-wiki">here</link>.
</para>
</listitem>
<listitem>
<para>
Deluge 2.x was added and is used as default for new NixOS
installations where stateVersion is >= 20.09. If you are upgrading from a previous
NixOS version, you can set <literal>service.deluge.package = pkgs.deluge-2_x</literal>
to upgrade to Deluge 2.x and migrate the state to the new format.
Be aware that backwards state migrations are not supported by Deluge.
</para>
</listitem>
<listitem>
<para>
Add option <literal>services.nginx.enableSandbox</literal> to starting Nginx web server with additional sandbox/hardening options.
By default, write access to <literal>services.nginx.stateDir</literal> is allowed. To allow writing to other folders,
use <literal>systemd.services.nginx.serviceConfig.ReadWritePaths</literal>
<programlisting>
systemd.services.nginx.serviceConfig.ReadWritePaths = [ "/var/www" ];
</programlisting>
</para>
</listitem>
<listitem>
<para>
The NixOS options <literal>nesting.clone</literal> and
<literal>nesting.children</literal> have been deleted, and
replaced with named <xref linkend="opt-specialisation"/>
configurations.
</para>
<para>
Replace a <literal>nesting.clone</literal> entry with:
<programlisting>{
<link xlink:href="#opt-specialisation">specialisation.example-sub-configuration</link> = {
<link xlink:href="#opt-specialisation._name_.configuration">configuration</link> = {
...
};
};</programlisting>
</para>
<para>
Replace a <literal>nesting.children</literal> entry with:
<programlisting>{
<link xlink:href="#opt-specialisation">specialisation.example-sub-configuration</link> = {
<link xlink:href="#opt-specialisation._name_.inheritParentConfig">inheritParentConfig</link> = false;
<link xlink:href="#opt-specialisation._name_.configuration">configuration</link> = {
...
};
};</programlisting>
</para>
<para>
To switch to a specialised configuration at runtime you need to
run:
<programlisting>
# sudo /run/current-system/specialisation/example-sub-configuration/bin/switch-to-configuration test
</programlisting>
Before you would have used:
<programlisting>
# sudo /run/current-system/fine-tune/child-1/bin/switch-to-configuration test
</programlisting>
</para>
</listitem>
<listitem>
<para>
The Nginx log directory has been moved to <literal>/var/log/nginx</literal>, the cache directory
to <literal>/var/cache/nginx</literal>. The option <literal>services.nginx.stateDir</literal> has
been removed.
</para>
</listitem>
<listitem>
<para>
The httpd web server previously started its main process as root
privileged, then ran worker processes as a less privileged identity user.
This was changed to start all of httpd as a less privileged user (defined by
<xref linkend="opt-services.httpd.user"/> and
<xref linkend="opt-services.httpd.group"/>). As a consequence, all files that
are needed for httpd to run (included configuration fragments, SSL
certificates and keys, etc.) must now be readable by this less privileged
user/group.
</para>
<para>
The default value for <xref linkend="opt-services.httpd.mpm"/>
has been changed from <literal>prefork</literal> to <literal>event</literal>. Along with
this change the default value for
<link linkend="opt-services.httpd.virtualHosts">services.httpd.virtualHosts.&lt;name&gt;.http2</link>
has been set to <literal>true</literal>.
</para>
</listitem>
<listitem>
<para>
The <literal>systemd-networkd</literal> option
<literal>systemd.network.networks.&lt;name&gt;.dhcp.CriticalConnection</literal>
has been removed following upstream systemd's deprecation of the same. It is recommended to use
<literal>systemd.network.networks.&lt;name&gt;.networkConfig.KeepConfiguration</literal> instead.
See <citerefentry><refentrytitle>systemd.network</refentrytitle>
<manvolnum>5</manvolnum></citerefentry> for details.
</para>
</listitem>
<listitem>
<para>
The <literal>systemd-networkd</literal> option
<literal>systemd.network.networks._name_.dhcpConfig</literal>
has been renamed to
<xref linkend="opt-systemd.network.networks._name_.dhcpV4Config"/>
following upstream systemd's documentation change.
See <citerefentry><refentrytitle>systemd.network</refentrytitle>
<manvolnum>5</manvolnum></citerefentry> for details.
</para>
</listitem>
<listitem>
<para>
In the <literal>picom</literal> module, several options that accepted
floating point numbers encoded as strings (for example
<xref linkend="opt-services.picom.activeOpacity"/>) have been changed
to the (relatively) new native <literal>float</literal> type. To migrate
your configuration simply remove the quotes around the numbers.
</para>
</listitem>
<listitem>
<para>
When using <literal>buildBazelPackage</literal> from Nixpkgs,
<literal>flat</literal> hash mode is now used for dependencies
instead of <literal>recursive</literal>. This is to better allow
using hashed mirrors where needed. As a result, these hashes
will have changed.
</para>
</listitem>
<listitem>
<para>
The rkt module has been removed, it was archived by upstream.
</para>
</listitem>
<listitem>
<para>
The <link xlink:href="https://bazaar.canonical.com">Bazaar</link> VCS is
unmaintained and, as consequence of the Python 2 EOL, the packages
<literal>bazaar</literal> and <literal>bazaarTools</literal> were
removed. Breezy, the backward compatible fork of Bazaar (see the
<link xlink:href="https://www.jelmer.uk/breezy-intro.html">announcement</link>),
was packaged as <literal>breezy</literal> and can be used instead.
</para>
<para>
Regarding Nixpkgs, <literal>fetchbzr</literal>,
<literal>nix-prefetch-bzr</literal> and Bazaar support in Hydra will
continue to work through Breezy.
</para>
</listitem>
<listitem>
<para>
In addition to the hostname, the fully qualified domain name (FQDN),
which consists of <literal>${cfg.hostName}</literal> and
<literal>${cfg.domain}</literal> is now added to
<literal>/etc/hosts</literal>, to allow local FQDN resolution, as used by the
<literal>hostname --fqdn</literal> command and other applications that
try to determine the FQDN. These new entries take precedence over entries
from the DNS which could cause regressions in some very specific setups.
Additionally the hostname is now resolved to <literal>127.0.0.2</literal>
instead of <literal>127.0.1.1</literal> to be consistent with what
<literal>nss-myhostname</literal> (from systemd) returns.
The old behaviour can e.g. be restored by using
<literal>networking.hosts = lib.mkForce { "127.0.1.1" = [ config.networking.hostName ]; };</literal>.
</para>
</listitem>
</itemizedlist>
</section>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09-notable-changes">
<title>Other Notable Changes</title>
<itemizedlist>
<listitem>
<para>
<option>services.journald.rateLimitBurst</option> was updated from
<literal>1000</literal> to <literal>10000</literal> to follow the new
upstream systemd default.
</para>
</listitem>
<listitem>
<para>
The <package>notmuch</package> package move its emacs-related binaries and
emacs lisp files to a separate output. They're not part
of the default <literal>out</literal> output anymore - if you relied on the
<literal>notmuch-emacs-mua</literal> binary or the emacs lisp files, access them via
the <literal>notmuch.emacs</literal> output.
</para>
</listitem>
<listitem>
<para>
The default output of <literal>buildGoPackage</literal> is now <literal>$out</literal> instead of <literal>$bin</literal>.
</para>
</listitem>
<listitem>
<para>
Default algorithm for ZRAM swap was changed to <literal>zstd</literal>.
</para>
</listitem>
<listitem>
<para>
The scripted networking system now uses <literal>.link</literal> files in
<literal>/etc/systemd/network</literal> to configure mac address and link MTU,
instead of the sometimes buggy <literal>network-link-*</literal> units, which
have been removed.
Bringing the interface up has been moved to the beginning of the
<literal>network-addresses-*</literal> unit.
Note this doesn't require <command>systemd-networkd</command> - it's udev that
parses <literal>.link</literal> files.
Extra care needs to be taken in the presence of <link xlink:href="https://wiki.debian.org/NetworkInterfaceNames#THE_.22PERSISTENT_NAMES.22_SCHEME">legacy udev rules</link>
to rename interfaces, as MAC Address and MTU defined in these options can only match on the original link name.
In such cases, you most likely want to create a <literal>10-*.link</literal> file through <xref linkend="opt-systemd.network.links"/> and set both name and MAC Address / MTU there.
</para>
</listitem>
<listitem>
<para>
Grafana received a major update to version 7.x. A plugin is now needed for
image rendering support, and plugins must now be signed by default. More
information can be found
<link xlink:href="https://grafana.com/docs/grafana/latest/installation/upgrading/#upgrading-to-v7-0">in the Grafana documentation</link>.
</para>
</listitem>
</itemizedlist>
</section>
</section>
View git blame Copy permalink