mirror of
https://github.com/NixOS/nixpkgs.git
synced 2024-12-20 21:17:46 +00:00
1cba74dfc1
I originally wrote this for packaging proprietary games in Vuizvui[1]
but I thought it would be generally useful as we have a fair amount of
proprietary software lurking around in nixpkgs, which are a bit tedious
to maintain, especially when the library dependencies change after an
update.
So this setup hook searches for all ELF executables and libraries in the
resulting output paths after install phase and uses patchelf to set the
RPATH and interpreter according to what dependencies are available
inside the builder.
For example consider something like this:
stdenv.mkDerivation {
...
nativeBuildInputs = [ autoPatchelfHook ];
buildInputs = [ mesa zlib ];
...
}
Whenever for example an executable requires mesa or zlib, the RPATH will
automatically be set to the lib dir of the corresponding dependency.
If the library dependency is required at runtime, an attribute called
runtimeDependencies can be used to list dependencies that are added to
all executables that are discovered unconditionally.
Beside this, it also makes initial packaging of proprietary software
easier, because one no longer has to manually figure out the
dependencies in the first place.
[1]: https://github.com/openlab-aux/vuizvui
Signed-off-by: aszlig <aszlig@nix.build>
Closes: #34506
2054 lines
86 KiB
XML
2054 lines
86 KiB
XML
<chapter xmlns="http://docbook.org/ns/docbook"
|
||
xmlns:xlink="http://www.w3.org/1999/xlink"
|
||
xml:id="chap-stdenv">
|
||
|
||
<title>The Standard Environment</title>
|
||
|
||
|
||
<para>The standard build environment in the Nix Packages collection
|
||
provides an environment for building Unix packages that does a lot of
|
||
common build tasks automatically. In fact, for Unix packages that use
|
||
the standard <literal>./configure; make; make install</literal> build
|
||
interface, you don’t need to write a build script at all; the standard
|
||
environment does everything automatically. If
|
||
<literal>stdenv</literal> doesn’t do what you need automatically, you
|
||
can easily customise or override the various build phases.</para>
|
||
|
||
|
||
<section xml:id="sec-using-stdenv"><title>Using
|
||
<literal>stdenv</literal></title>
|
||
|
||
<para>To build a package with the standard environment, you use the
|
||
function <varname>stdenv.mkDerivation</varname>, instead of the
|
||
primitive built-in function <varname>derivation</varname>, e.g.
|
||
|
||
<programlisting>
|
||
stdenv.mkDerivation {
|
||
name = "libfoo-1.2.3";
|
||
src = fetchurl {
|
||
url = http://example.org/libfoo-1.2.3.tar.bz2;
|
||
sha256 = "0x2g1jqygyr5wiwg4ma1nd7w4ydpy82z9gkcv8vh2v8dn3y58v5m";
|
||
};
|
||
}</programlisting>
|
||
|
||
(<varname>stdenv</varname> needs to be in scope, so if you write this
|
||
in a separate Nix expression from
|
||
<filename>pkgs/all-packages.nix</filename>, you need to pass it as a
|
||
function argument.) Specifying a <varname>name</varname> and a
|
||
<varname>src</varname> is the absolute minimum you need to do. Many
|
||
packages have dependencies that are not provided in the standard
|
||
environment. It’s usually sufficient to specify those dependencies in
|
||
the <varname>buildInputs</varname> attribute:
|
||
|
||
<programlisting>
|
||
stdenv.mkDerivation {
|
||
name = "libfoo-1.2.3";
|
||
...
|
||
buildInputs = [libbar perl ncurses];
|
||
}</programlisting>
|
||
|
||
This attribute ensures that the <filename>bin</filename>
|
||
subdirectories of these packages appear in the <envar>PATH</envar>
|
||
environment variable during the build, that their
|
||
<filename>include</filename> subdirectories are searched by the C
|
||
compiler, and so on. (See <xref linkend="ssec-setup-hooks"/> for
|
||
details.)</para>
|
||
|
||
<para>Often it is necessary to override or modify some aspect of the
|
||
build. To make this easier, the standard environment breaks the
|
||
package build into a number of <emphasis>phases</emphasis>, all of
|
||
which can be overridden or modified individually: unpacking the
|
||
sources, applying patches, configuring, building, and installing.
|
||
(There are some others; see <xref linkend="sec-stdenv-phases"/>.)
|
||
For instance, a package that doesn’t supply a makefile but instead has
|
||
to be compiled “manually” could be handled like this:
|
||
|
||
<programlisting>
|
||
stdenv.mkDerivation {
|
||
name = "fnord-4.5";
|
||
...
|
||
buildPhase = ''
|
||
gcc foo.c -o foo
|
||
'';
|
||
installPhase = ''
|
||
mkdir -p $out/bin
|
||
cp foo $out/bin
|
||
'';
|
||
}</programlisting>
|
||
|
||
(Note the use of <literal>''</literal>-style string literals, which
|
||
are very convenient for large multi-line script fragments because they
|
||
don’t need escaping of <literal>"</literal> and <literal>\</literal>,
|
||
and because indentation is intelligently removed.)</para>
|
||
|
||
<para>There are many other attributes to customise the build. These
|
||
are listed in <xref linkend="ssec-stdenv-attributes"/>.</para>
|
||
|
||
<para>While the standard environment provides a generic builder, you
|
||
can still supply your own build script:
|
||
|
||
<programlisting>
|
||
stdenv.mkDerivation {
|
||
name = "libfoo-1.2.3";
|
||
...
|
||
builder = ./builder.sh;
|
||
}</programlisting>
|
||
|
||
where the builder can do anything it wants, but typically starts with
|
||
|
||
<programlisting>
|
||
source $stdenv/setup
|
||
</programlisting>
|
||
|
||
to let <literal>stdenv</literal> set up the environment (e.g., process
|
||
the <varname>buildInputs</varname>). If you want, you can still use
|
||
<literal>stdenv</literal>’s generic builder:
|
||
|
||
<programlisting>
|
||
source $stdenv/setup
|
||
|
||
buildPhase() {
|
||
echo "... this is my custom build phase ..."
|
||
gcc foo.c -o foo
|
||
}
|
||
|
||
installPhase() {
|
||
mkdir -p $out/bin
|
||
cp foo $out/bin
|
||
}
|
||
|
||
genericBuild
|
||
</programlisting>
|
||
|
||
</para>
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="sec-tools-of-stdenv"><title>Tools provided by
|
||
<literal>stdenv</literal></title>
|
||
|
||
<para>The standard environment provides the following packages:
|
||
|
||
<itemizedlist>
|
||
|
||
<listitem><para>The GNU C Compiler, configured with C and C++
|
||
support.</para></listitem>
|
||
|
||
<listitem><para>GNU coreutils (contains a few dozen standard Unix
|
||
commands).</para></listitem>
|
||
|
||
<listitem><para>GNU findutils (contains
|
||
<command>find</command>).</para></listitem>
|
||
|
||
<listitem><para>GNU diffutils (contains <command>diff</command>,
|
||
<command>cmp</command>).</para></listitem>
|
||
|
||
<listitem><para>GNU <command>sed</command>.</para></listitem>
|
||
|
||
<listitem><para>GNU <command>grep</command>.</para></listitem>
|
||
|
||
<listitem><para>GNU <command>awk</command>.</para></listitem>
|
||
|
||
<listitem><para>GNU <command>tar</command>.</para></listitem>
|
||
|
||
<listitem><para><command>gzip</command>, <command>bzip2</command>
|
||
and <command>xz</command>.</para></listitem>
|
||
|
||
<listitem><para>GNU Make. It has been patched to provide
|
||
<quote>nested</quote> output that can be fed into the
|
||
<command>nix-log2xml</command> command and
|
||
<command>log2html</command> stylesheet to create a structured,
|
||
readable output of the build steps performed by
|
||
Make.</para></listitem>
|
||
|
||
<listitem><para>Bash. This is the shell used for all builders in
|
||
the Nix Packages collection. Not using <command>/bin/sh</command>
|
||
removes a large source of portability problems.</para></listitem>
|
||
|
||
<listitem><para>The <command>patch</command>
|
||
command.</para></listitem>
|
||
|
||
</itemizedlist>
|
||
|
||
</para>
|
||
|
||
<para>On Linux, <literal>stdenv</literal> also includes the
|
||
<command>patchelf</command> utility.</para>
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="ssec-stdenv-dependencies"><title>Specifying dependencies</title>
|
||
|
||
<para>
|
||
As described in the Nix manual, almost any <filename>*.drv</filename> store path in a derivation's attribute set will induce a dependency on that derivation.
|
||
<varname>mkDerivation</varname>, however, takes a few attributes intended to, between them, include all the dependencies of a package.
|
||
This is done both for structure and consistency, but also so that certain other setup can take place.
|
||
For example, certain dependencies need their bin directories added to the <envar>PATH</envar>.
|
||
That is built-in, but other setup is done via a pluggable mechanism that works in conjunction with these dependency attributes.
|
||
See <xref linkend="ssec-setup-hooks"/> for details.
|
||
</para>
|
||
<para>
|
||
Dependencies can be broken down along three axes: their host and target platforms relative to the new derivation's, and whether they are propagated.
|
||
The platform distinctions are motivated by cross compilation; see <xref linkend="chap-cross"/> for exactly what each platform means.
|
||
<footnote><para>
|
||
The build platform is ignored because it is a mere implementation detail of the package satisfying the dependency:
|
||
As a general programming principle, dependencies are always <emphasis>specified</emphasis> as interfaces, not concrete implementation.
|
||
</para></footnote>
|
||
But even if one is not cross compiling, the platforms imply whether or not the dependency is needed at run-time or build-time, a concept that makes perfect sense outside of cross compilation.
|
||
For now, the run-time/build-time distinction is just a hint for mental clarity, but in the future it perhaps could be enforced.
|
||
</para>
|
||
<para>
|
||
The extension of <envar>PATH</envar> with dependencies, alluded to above, proceeds according to the relative platforms alone.
|
||
The process is carried out only for dependencies whose host platform matches the new derivation's build platform–i.e. which run on the platform where the new derivation will be built.
|
||
<footnote><para>
|
||
Currently, that means for native builds all dependencies are put on the <envar>PATH</envar>.
|
||
But in the future that may not be the case for sake of matching cross:
|
||
the platforms would be assumed to be unique for native and cross builds alike, so only the <varname>depsBuild*</varname> and <varname>nativeBuildDependencies</varname> dependencies would affect the <envar>PATH</envar>.
|
||
</para></footnote>
|
||
For each dependency <replaceable>dep</replaceable> of those dependencies, <filename><replaceable>dep</replaceable>/bin</filename>, if present, is added to the <envar>PATH</envar> environment variable.
|
||
</para>
|
||
<para>
|
||
The dependency is propagated when it forces some of its other-transitive (non-immediate) downstream dependencies to also take it on as an immediate dependency.
|
||
Nix itself already takes a package's transitive dependencies into account, but this propagation ensures nixpkgs-specific infrastructure like setup hooks (mentioned above) also are run as if the propagated dependency.
|
||
</para>
|
||
<para>
|
||
It is important to note dependencies are not necessary propagated as the same sort of dependency that they were before, but rather as the corresponding sort so that the platform rules still line up.
|
||
The exact rules for dependency propagation can be given by assigning each sort of dependency two integers based one how it's host and target platforms are offset from the depending derivation's platforms.
|
||
Those offsets are given are given below in the descriptions of each dependency list attribute.
|
||
Algorithmically, we traverse propagated inputs, accumulating every propagated dep's propagated deps and adjusting them to account for the "shift in perspective" described by the current dep's platform offsets.
|
||
This results in sort a transitive closure of the dependency relation, with the offsets being approximately summed when two dependency links are combined.
|
||
We also prune transitive deps whose combined offsets go out-of-bounds, which can be viewed as a filter over that transitive closure removing dependencies that are blatantly absurd.
|
||
</para>
|
||
<para>
|
||
We can define the process precisely with <link xlink:href="https://en.wikipedia.org/wiki/Natural_deduction">Natural Deduction</link> using the inference rules.
|
||
This probably seems a bit obtuse, but so is the bash code that actually implements it!
|
||
<footnote><para>
|
||
The <function>findInputs</function> function, currently residing in <filename>pkgs/stdenv/generic/setup.sh</filename>, implements the propagation logic.
|
||
</para></footnote>
|
||
They're confusing in very different ways so...hopefully if something doesn't make sense in one presentation, it does in the other!
|
||
<programlisting>
|
||
let mapOffset(h, t, i) = i + (if i <= 0 then h else t - 1)
|
||
|
||
propagated-dep(h0, t0, A, B)
|
||
propagated-dep(h1, t1, B, C)
|
||
h0 + h1 in {-1, 0, 1}
|
||
h0 + t1 in {-1, 0, 1}
|
||
-------------------------------------- Transitive property
|
||
propagated-dep(mapOffset(h0, t0, h1),
|
||
mapOffset(h0, t0, t1),
|
||
A, C)</programlisting>
|
||
<programlisting>
|
||
let mapOffset(h, t, i) = i + (if i <= 0 then h else t - 1)
|
||
|
||
dep(h0, _, A, B)
|
||
propagated-dep(h1, t1, B, C)
|
||
h0 + h1 in {-1, 0, 1}
|
||
h0 + t1 in {-1, 0, -1}
|
||
-------------------------------------- Take immediate deps' propagated deps
|
||
propagated-dep(mapOffset(h0, t0, h1),
|
||
mapOffset(h0, t0, t1),
|
||
A, C)</programlisting>
|
||
<programlisting>
|
||
propagated-dep(h, t, A, B)
|
||
-------------------------------------- Propagated deps count as deps
|
||
dep(h, t, A, B)</programlisting>
|
||
Some explanation of this monstrosity is in order.
|
||
In the common case, the target offset of a dependency is the successor to the target offset: <literal>t = h + 1</literal>.
|
||
That means that:
|
||
<programlisting>
|
||
let f(h, t, i) = i + (if i <= 0 then h else t - 1)
|
||
let f(h, h + 1, i) = i + (if i <= 0 then h else (h + 1) - 1)
|
||
let f(h, h + 1, i) = i + (if i <= 0 then h else h)
|
||
let f(h, h + 1, i) = i + h
|
||
</programlisting>
|
||
This is where the "sum-like" comes from above:
|
||
We can just sum all the host offset to get the host offset of the transitive dependency.
|
||
The target offset is the transitive dep is simply the host offset + 1, just as it was with the dependencies composed to make this transitive one;
|
||
it can be ignored as it doesn't add any new information.
|
||
</para>
|
||
<para>
|
||
Because of the bounds checks, the uncommon cases are <literal>h = t</literal> and <literal>h + 2 = t</literal>.
|
||
In the former case, the motivation for <function>mapOffset</function> is that since its host and target platforms are the same, no transitive dep of it should be able to "discover" an offset greater than its reduced target offsets.
|
||
<function>mapOffset</function> effectively "squashes" all its transitive dependencies' offsets so that none will ever be greater than the target offset of the original <literal>h = t</literal> package.
|
||
In the other case, <literal>h + 1</literal> is skipped over between the host and target offsets.
|
||
Instead of squashing the offsets, we need to "rip" them apart so no transitive dependencies' offset is that one.
|
||
</para>
|
||
<para>
|
||
Overall, the unifying theme here is that propagation shouldn't be introducing transitive dependencies involving platforms the needing package is unaware of.
|
||
The offset bounds checking and definition of <function>mapOffset</function> together ensure that this is the case.
|
||
Discovering a new offset is discovering a new platform, and since those platforms weren't in the derivation "spec" of the needing package, they cannot be relevant.
|
||
From a capability perspective, we can imagine that the host and target platforms of a package are the capabilities a package requires, and the depending package must provide the capability to the dependency.
|
||
</para>
|
||
|
||
<variablelist>
|
||
<title>Variables specifying dependencies</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>depsBuildBuild</varname></term>
|
||
<listitem>
|
||
<para>
|
||
A list of dependencies whose host and target platforms are the new derivation's build platform.
|
||
This means a <literal>-1</literal> host and <literal>-1</literal> target offset from the new derivation's platforms.
|
||
They are programs/libraries used at build time that furthermore produce programs/libraries also used at build time.
|
||
If the dependency doesn't care about the target platform (i.e. isn't a compiler or similar tool), put it in <varname>nativeBuildInputs</varname>instead.
|
||
The most common use for this <literal>buildPackages.stdenv.cc</literal>, the default C compiler for this role.
|
||
That example crops up more than one might think in old commonly used C libraries.
|
||
</para>
|
||
<para>
|
||
Since these packages are able to be run at build time, that are always added to the <envar>PATH</envar>, as described above.
|
||
But since these packages are only guaranteed to be able to run then, they shouldn't persist as run-time dependencies.
|
||
This isn't currently enforced, but could be in the future.
|
||
</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>nativeBuildInputs</varname></term>
|
||
<listitem>
|
||
<para>
|
||
A list of dependencies whose host platform is the new derivation's build platform, and target platform is the new derivation's host platform.
|
||
This means a <literal>-1</literal> host offset and <literal>0</literal> target offset from the new derivation's platforms.
|
||
They are programs/libraries used at build time that, if they are a compiler or similar tool, produce code to run at run time—i.e. tools used to build the new derivation.
|
||
If the dependency doesn't care about the target platform (i.e. isn't a compiler or similar tool), put it here, rather than in <varname>depsBuildBuild</varname> or <varname>depsBuildTarget</varname>.
|
||
This would be called <varname>depsBuildHost</varname> but for historical continuity.
|
||
</para>
|
||
<para>
|
||
Since these packages are able to be run at build time, that are added to the <envar>PATH</envar>, as described above.
|
||
But since these packages only are guaranteed to be able to run then, they shouldn't persist as run-time dependencies.
|
||
This isn't currently enforced, but could be in the future.
|
||
</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>depsBuildTarget</varname></term>
|
||
<listitem>
|
||
<para>
|
||
A list of dependencies whose host platform is the new derivation's build platform, and target platform is the new derivation's target platform.
|
||
This means a <literal>-1</literal> host offset and <literal>1</literal> target offset from the new derivation's platforms.
|
||
They are programs used at build time that produce code to run at run with code produced by the depending package.
|
||
Most commonly, these would tools used to build the runtime or standard library the currently-being-built compiler will inject into any code it compiles.
|
||
In many cases, the currently-being built compiler is itself employed for that task, but when that compiler won't run (i.e. its build and host platform differ) this is not possible.
|
||
Other times, the compiler relies on some other tool, like binutils, that is always built separately so the dependency is unconditional.
|
||
</para>
|
||
<para>
|
||
This is a somewhat confusing dependency to wrap ones head around, and for good reason.
|
||
As the only one where the platform offsets are not adjacent integers, it requires thinking of a bootstrapping stage <emphasis>two</emphasis> away from the current one.
|
||
It and it's use-case go hand in hand and are both considered poor form:
|
||
try not to need this sort dependency, and try not avoid building standard libraries / runtimes in the same derivation as the compiler produces code using them.
|
||
Instead strive to build those like a normal library, using the newly-built compiler just as a normal library would.
|
||
In short, do not use this attribute unless you are packaging a compiler and are sure it is needed.
|
||
</para>
|
||
<para>
|
||
Since these packages are able to be run at build time, that are added to the <envar>PATH</envar>, as described above.
|
||
But since these packages only are guaranteed to be able to run then, they shouldn't persist as run-time dependencies.
|
||
This isn't currently enforced, but could be in the future.
|
||
</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>depsHostHost</varname></term>
|
||
<listitem><para>
|
||
A list of dependencies whose host and target platforms match the new derivation's host platform.
|
||
This means a both <literal>0</literal> host offset and <literal>0</literal> target offset from the new derivation's host platform.
|
||
These are packages used at run-time to generate code also used at run-time.
|
||
In practice, that would usually be tools used by compilers for metaprogramming/macro systems, or libraries used by the macros/metaprogramming code itself.
|
||
It's always preferable to use a <varname>depsBuildBuild</varname> dependency in the derivation being built than a <varname>depsHostHost</varname> on the tool doing the building for this purpose.
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>buildInputs</varname></term>
|
||
<listitem>
|
||
<para>
|
||
A list of dependencies whose host platform and target platform match the new derivation's.
|
||
This means a <literal>0</literal> host offset and <literal>1</literal> target offset from the new derivation's host platform.
|
||
This would be called <varname>depsHostTarget</varname> but for historical continuity.
|
||
If the dependency doesn't care about the target platform (i.e. isn't a compiler or similar tool), put it here, rather than in <varname>depsBuildBuild</varname>.
|
||
</para>
|
||
<para>
|
||
These often are programs/libraries used by the new derivation at <emphasis>run</emphasis>-time, but that isn't always the case.
|
||
For example, the machine code in a statically linked library is only used at run time, but the derivation containing the library is only needed at build time.
|
||
Even in the dynamic case, the library may also be needed at build time to appease the linker.
|
||
</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>depsTargetTarget</varname></term>
|
||
<listitem><para>
|
||
A list of dependencies whose host platform matches the new derivation's target platform.
|
||
This means a <literal>1</literal> offset from the new derivation's platforms.
|
||
These are packages that run on the target platform, e.g. the standard library or run-time deps of standard library that a compiler insists on knowing about.
|
||
It's poor form in almost all cases for a package to depend on another from a future stage [future stage corresponding to positive offset].
|
||
Do not use this attribute unless you are packaging a compiler and are sure it is needed.
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>depsBuildBuildPropagated</varname></term>
|
||
<listitem><para>
|
||
The propagated equivalent of <varname>depsBuildBuild</varname>.
|
||
This perhaps never ought to be used, but it is included for consistency [see below for the others].
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>propagatedNativeBuildInputs</varname></term>
|
||
<listitem><para>
|
||
The propagated equivalent of <varname>nativeBuildInputs</varname>.
|
||
This would be called <varname>depsBuildHostPropagated</varname> but for historical continuity.
|
||
For example, if package <varname>Y</varname> has <literal>propagatedNativeBuildInputs = [X]</literal>, and package <varname>Z</varname> has <literal>buildInputs = [Y]</literal>, then package <varname>Z</varname> will be built as if it included package <varname>X</varname> in its <varname>nativeBuildInputs</varname>.
|
||
If instead, package <varname>Z</varname> has <literal>nativeBuildInputs = [Y]</literal>, then <varname>Z</varname> will be built as if it included <varname>X</varname> in the <varname>depsBuildBuild</varname> of package <varname>Z</varname>, because of the sum of the two <literal>-1</literal> host offsets.
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>depsBuildTargetPropagated</varname></term>
|
||
<listitem><para>
|
||
The propagated equivalent of <varname>depsBuildTarget</varname>.
|
||
This is prefixed for the same reason of alerting potential users.
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>depsHostHostPropagated</varname></term>
|
||
<listitem><para>
|
||
The propagated equivalent of <varname>depsHostHost</varname>.
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>propagatedBuildInputs</varname></term>
|
||
<listitem><para>
|
||
The propagated equivalent of <varname>buildInputs</varname>.
|
||
This would be called <varname>depsHostTargetPropagated</varname> but for historical continuity.
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>depsTargetTarget</varname></term>
|
||
<listitem><para>
|
||
The propagated equivalent of <varname>depsTargetTarget</varname>.
|
||
This is prefixed for the same reason of alerting potential users.
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="ssec-stdenv-attributes"><title>Attributes</title>
|
||
|
||
<variablelist>
|
||
<title>Variables affecting <literal>stdenv</literal>
|
||
initialisation</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>NIX_DEBUG</varname></term>
|
||
<listitem><para>
|
||
A natural number indicating how much information to log.
|
||
If set to 1 or higher, <literal>stdenv</literal> will print moderate debug information during the build.
|
||
In particular, the <command>gcc</command> and <command>ld</command> wrapper scripts will print out the complete command line passed to the wrapped tools.
|
||
If set to 6 or higher, the <literal>stdenv</literal> setup script will be run with <literal>set -x</literal> tracing.
|
||
If set to 7 or higher, the <command>gcc</command> and <command>ld</command> wrapper scripts will also be run with <literal>set -x</literal> tracing.
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
<variablelist>
|
||
<title>Variables affecting build properties</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>enableParallelBuilding</varname></term>
|
||
<listitem>
|
||
<para>If set to <literal>true</literal>, <literal>stdenv</literal> will
|
||
pass specific flags to <literal>make</literal> and other build tools to
|
||
enable parallel building with up to <literal>build-cores</literal>
|
||
workers.</para>
|
||
|
||
<para>Unless set to <literal>false</literal>, some build systems with good
|
||
support for parallel building including <literal>cmake</literal>,
|
||
<literal>meson</literal>, and <literal>qmake</literal> will set it to
|
||
<literal>true</literal>.</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preferLocalBuild</varname></term>
|
||
<listitem><para>If set, specifies that the package is so lightweight
|
||
in terms of build operations (e.g. write a text file from a Nix string
|
||
to the store) that there's no need to look for it in binary caches --
|
||
it's faster to just build it locally. It also tells Hydra and other
|
||
facilities that this package doesn't need to be exported in binary
|
||
caches (noone would use it, after all).</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
<variablelist>
|
||
<title>Special variables</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>passthru</varname></term>
|
||
<listitem><para>This is an attribute set which can be filled with arbitrary
|
||
values. For example:
|
||
|
||
<programlisting>
|
||
passthru = {
|
||
foo = "bar";
|
||
baz = {
|
||
value1 = 4;
|
||
value2 = 5;
|
||
};
|
||
}
|
||
</programlisting>
|
||
|
||
</para>
|
||
|
||
<para>Values inside it are not passed to the builder, so you can change
|
||
them without triggering a rebuild. However, they can be accessed outside of a
|
||
derivation directly, as if they were set inside a derivation itself, e.g.
|
||
<literal>hello.baz.value1</literal>. We don't specify any usage or
|
||
schema of <literal>passthru</literal> - it is meant for values that would be
|
||
useful outside the derivation in other parts of a Nix expression (e.g. in other
|
||
derivations). An example would be to convey some specific dependency of your
|
||
derivation which contains a program with plugins support. Later, others who
|
||
make derivations with plugins can use passed-through dependency to ensure that
|
||
their plugin would be binary-compatible with built program.</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="sec-stdenv-phases"><title>Phases</title>
|
||
|
||
<para>The generic builder has a number of <emphasis>phases</emphasis>.
|
||
Package builds are split into phases to make it easier to override
|
||
specific parts of the build (e.g., unpacking the sources or installing
|
||
the binaries). Furthermore, it allows a nicer presentation of build
|
||
logs in the Nix build farm.</para>
|
||
|
||
<para>Each phase can be overridden in its entirety either by setting
|
||
the environment variable
|
||
<varname><replaceable>name</replaceable>Phase</varname> to a string
|
||
containing some shell commands to be executed, or by redefining the
|
||
shell function
|
||
<varname><replaceable>name</replaceable>Phase</varname>. The former
|
||
is convenient to override a phase from the derivation, while the
|
||
latter is convenient from a build script.
|
||
|
||
However, typically one only wants to <emphasis>add</emphasis> some
|
||
commands to a phase, e.g. by defining <literal>postInstall</literal>
|
||
or <literal>preFixup</literal>, as skipping some of the default actions
|
||
may have unexpected consequences.
|
||
</para>
|
||
|
||
|
||
<section xml:id="ssec-controlling-phases"><title>Controlling
|
||
phases</title>
|
||
|
||
<para>There are a number of variables that control what phases are
|
||
executed and in what order:
|
||
|
||
<variablelist>
|
||
<title>Variables affecting phase control</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>phases</varname></term>
|
||
<listitem>
|
||
<para>Specifies the phases. You can change the order in which
|
||
phases are executed, or add new phases, by setting this
|
||
variable. If it’s not set, the default value is used, which is
|
||
<literal>$prePhases unpackPhase patchPhase $preConfigurePhases
|
||
configurePhase $preBuildPhases buildPhase checkPhase
|
||
$preInstallPhases installPhase fixupPhase $preDistPhases
|
||
distPhase $postPhases</literal>.
|
||
</para>
|
||
|
||
<para>Usually, if you just want to add a few phases, it’s more
|
||
convenient to set one of the variables below (such as
|
||
<varname>preInstallPhases</varname>), as you then don’t specify
|
||
all the normal phases.</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>prePhases</varname></term>
|
||
<listitem>
|
||
<para>Additional phases executed before any of the default phases.</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preConfigurePhases</varname></term>
|
||
<listitem>
|
||
<para>Additional phases executed just before the configure phase.</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preBuildPhases</varname></term>
|
||
<listitem>
|
||
<para>Additional phases executed just before the build phase.</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preInstallPhases</varname></term>
|
||
<listitem>
|
||
<para>Additional phases executed just before the install phase.</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preFixupPhases</varname></term>
|
||
<listitem>
|
||
<para>Additional phases executed just before the fixup phase.</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preDistPhases</varname></term>
|
||
<listitem>
|
||
<para>Additional phases executed just before the distribution phase.</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>postPhases</varname></term>
|
||
<listitem>
|
||
<para>Additional phases executed after any of the default
|
||
phases.</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
</para>
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="ssec-unpack-phase"><title>The unpack phase</title>
|
||
|
||
<para>The unpack phase is responsible for unpacking the source code of
|
||
the package. The default implementation of
|
||
<function>unpackPhase</function> unpacks the source files listed in
|
||
the <envar>src</envar> environment variable to the current directory.
|
||
It supports the following files by default:
|
||
|
||
<variablelist>
|
||
|
||
<varlistentry>
|
||
<term>Tar files</term>
|
||
<listitem><para>These can optionally be compressed using
|
||
<command>gzip</command> (<filename>.tar.gz</filename>,
|
||
<filename>.tgz</filename> or <filename>.tar.Z</filename>),
|
||
<command>bzip2</command> (<filename>.tar.bz2</filename> or
|
||
<filename>.tbz2</filename>) or <command>xz</command>
|
||
(<filename>.tar.xz</filename> or
|
||
<filename>.tar.lzma</filename>).</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>Zip files</term>
|
||
<listitem><para>Zip files are unpacked using
|
||
<command>unzip</command>. However, <command>unzip</command> is
|
||
not in the standard environment, so you should add it to
|
||
<varname>buildInputs</varname> yourself.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>Directories in the Nix store</term>
|
||
<listitem><para>These are simply copied to the current directory.
|
||
The hash part of the file name is stripped,
|
||
e.g. <filename>/nix/store/1wydxgby13cz...-my-sources</filename>
|
||
would be copied to
|
||
<filename>my-sources</filename>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
Additional file types can be supported by setting the
|
||
<varname>unpackCmd</varname> variable (see below).</para>
|
||
|
||
<para></para>
|
||
|
||
<variablelist>
|
||
<title>Variables controlling the unpack phase</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>srcs</varname> / <varname>src</varname></term>
|
||
<listitem><para>The list of source files or directories to be
|
||
unpacked or copied. One of these must be set.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>sourceRoot</varname></term>
|
||
<listitem><para>After running <function>unpackPhase</function>,
|
||
the generic builder changes the current directory to the directory
|
||
created by unpacking the sources. If there are multiple source
|
||
directories, you should set <varname>sourceRoot</varname> to the
|
||
name of the intended directory.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>setSourceRoot</varname></term>
|
||
<listitem><para>Alternatively to setting
|
||
<varname>sourceRoot</varname>, you can set
|
||
<varname>setSourceRoot</varname> to a shell command to be
|
||
evaluated by the unpack phase after the sources have been
|
||
unpacked. This command must set
|
||
<varname>sourceRoot</varname>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preUnpack</varname></term>
|
||
<listitem><para>Hook executed at the start of the unpack
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>postUnpack</varname></term>
|
||
<listitem><para>Hook executed at the end of the unpack
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>dontMakeSourcesWritable</varname></term>
|
||
<listitem><para>If set to <literal>1</literal>, the unpacked
|
||
sources are <emphasis>not</emphasis> made
|
||
writable. By default, they are made writable to prevent problems
|
||
with read-only sources. For example, copied store directories
|
||
would be read-only without this.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>unpackCmd</varname></term>
|
||
<listitem><para>The unpack phase evaluates the string
|
||
<literal>$unpackCmd</literal> for any unrecognised file. The path
|
||
to the current source file is contained in the
|
||
<varname>curSrc</varname> variable.</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="ssec-patch-phase"><title>The patch phase</title>
|
||
|
||
<para>The patch phase applies the list of patches defined in the
|
||
<varname>patches</varname> variable.</para>
|
||
|
||
<variablelist>
|
||
<title>Variables controlling the patch phase</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>patches</varname></term>
|
||
<listitem><para>The list of patches. They must be in the format
|
||
accepted by the <command>patch</command> command, and may
|
||
optionally be compressed using <command>gzip</command>
|
||
(<filename>.gz</filename>), <command>bzip2</command>
|
||
(<filename>.bz2</filename>) or <command>xz</command>
|
||
(<filename>.xz</filename>).</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>patchFlags</varname></term>
|
||
<listitem><para>Flags to be passed to <command>patch</command>.
|
||
If not set, the argument <option>-p1</option> is used, which
|
||
causes the leading directory component to be stripped from the
|
||
file names in each patch.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>prePatch</varname></term>
|
||
<listitem><para>Hook executed at the start of the patch
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>postPatch</varname></term>
|
||
<listitem><para>Hook executed at the end of the patch
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="ssec-configure-phase"><title>The configure phase</title>
|
||
|
||
<para>The configure phase prepares the source tree for building. The
|
||
default <function>configurePhase</function> runs
|
||
<filename>./configure</filename> (typically an Autoconf-generated
|
||
script) if it exists.</para>
|
||
|
||
<variablelist>
|
||
<title>Variables controlling the configure phase</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>configureScript</varname></term>
|
||
<listitem><para>The name of the configure script. It defaults to
|
||
<filename>./configure</filename> if it exists; otherwise, the
|
||
configure phase is skipped. This can actually be a command (like
|
||
<literal>perl ./Configure.pl</literal>).</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>configureFlags</varname></term>
|
||
<listitem><para>A list of strings passed as additional arguments to the
|
||
configure script.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>configureFlagsArray</varname></term>
|
||
<listitem><para>A shell array containing additional arguments
|
||
passed to the configure script. You must use this instead of
|
||
<varname>configureFlags</varname> if the arguments contain
|
||
spaces.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>dontAddPrefix</varname></term>
|
||
<listitem><para>By default, the flag
|
||
<literal>--prefix=$prefix</literal> is added to the configure
|
||
flags. If this is undesirable, set this variable to
|
||
true.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>prefix</varname></term>
|
||
<listitem><para>The prefix under which the package must be
|
||
installed, passed via the <option>--prefix</option> option to the
|
||
configure script. It defaults to
|
||
<option>$out</option>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>dontAddDisableDepTrack</varname></term>
|
||
<listitem><para>By default, the flag
|
||
<literal>--disable-dependency-tracking</literal> is added to the
|
||
configure flags to speed up Automake-based builds. If this is
|
||
undesirable, set this variable to true.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>dontFixLibtool</varname></term>
|
||
<listitem><para>By default, the configure phase applies some
|
||
special hackery to all files called <filename>ltmain.sh</filename>
|
||
before running the configure script in order to improve the purity
|
||
of Libtool-based packages<footnote><para>It clears the
|
||
<varname>sys_lib_<replaceable>*</replaceable>search_path</varname>
|
||
variables in the Libtool script to prevent Libtool from using
|
||
libraries in <filename>/usr/lib</filename> and
|
||
such.</para></footnote>. If this is undesirable, set this
|
||
variable to true.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>dontDisableStatic</varname></term>
|
||
<listitem><para>By default, when the configure script has
|
||
<option>--enable-static</option>, the option
|
||
<option>--disable-static</option> is added to the configure flags.</para>
|
||
<para>If this is undesirable, set this variable to
|
||
true.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>configurePlatforms</varname></term>
|
||
<listitem><para>
|
||
By default, when cross compiling, the configure script has <option>--build=...</option> and <option>--host=...</option> passed.
|
||
Packages can instead pass <literal>[ "build" "host" "target" ]</literal> or a subset to control exactly which platform flags are passed.
|
||
Compilers and other tools should use this to also pass the target platform, for example.
|
||
<footnote><para>Eventually these will be passed when in native builds too, to improve determinism: build-time guessing, as is done today, is a risk of impurity.</para></footnote>
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preConfigure</varname></term>
|
||
<listitem><para>Hook executed at the start of the configure
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>postConfigure</varname></term>
|
||
<listitem><para>Hook executed at the end of the configure
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="build-phase"><title>The build phase</title>
|
||
|
||
<para>The build phase is responsible for actually building the package
|
||
(e.g. compiling it). The default <function>buildPhase</function>
|
||
simply calls <command>make</command> if a file named
|
||
<filename>Makefile</filename>, <filename>makefile</filename> or
|
||
<filename>GNUmakefile</filename> exists in the current directory (or
|
||
the <varname>makefile</varname> is explicitly set); otherwise it does
|
||
nothing.</para>
|
||
|
||
<variablelist>
|
||
<title>Variables controlling the build phase</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>dontBuild</varname></term>
|
||
<listitem><para>Set to true to skip the build phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>makefile</varname></term>
|
||
<listitem><para>The file name of the Makefile.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>makeFlags</varname></term>
|
||
<listitem><para>A list of strings passed as additional flags to
|
||
<command>make</command>. These flags are also used by the default
|
||
install and check phase. For setting make flags specific to the
|
||
build phase, use <varname>buildFlags</varname> (see below).
|
||
|
||
<programlisting>
|
||
makeFlags = [ "PREFIX=$(out)" ];
|
||
</programlisting>
|
||
|
||
<note><para>The flags are quoted in bash, but environment variables can
|
||
be specified by using the make syntax.</para></note></para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>makeFlagsArray</varname></term>
|
||
<listitem><para>A shell array containing additional arguments
|
||
passed to <command>make</command>. You must use this instead of
|
||
<varname>makeFlags</varname> if the arguments contain
|
||
spaces, e.g.
|
||
|
||
<programlisting>
|
||
makeFlagsArray=(CFLAGS="-O0 -g" LDFLAGS="-lfoo -lbar")
|
||
</programlisting>
|
||
|
||
Note that shell arrays cannot be passed through environment
|
||
variables, so you cannot set <varname>makeFlagsArray</varname> in
|
||
a derivation attribute (because those are passed through
|
||
environment variables): you have to define them in shell
|
||
code.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>buildFlags</varname> / <varname>buildFlagsArray</varname></term>
|
||
<listitem><para>A list of strings passed as additional flags to
|
||
<command>make</command>. Like <varname>makeFlags</varname> and
|
||
<varname>makeFlagsArray</varname>, but only used by the build
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preBuild</varname></term>
|
||
<listitem><para>Hook executed at the start of the build
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>postBuild</varname></term>
|
||
<listitem><para>Hook executed at the end of the build
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
|
||
<para>
|
||
You can set flags for <command>make</command> through the
|
||
<varname>makeFlags</varname> variable.</para>
|
||
|
||
<para>Before and after running <command>make</command>, the hooks
|
||
<varname>preBuild</varname> and <varname>postBuild</varname> are
|
||
called, respectively.</para>
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="ssec-check-phase"><title>The check phase</title>
|
||
|
||
<para>The check phase checks whether the package was built correctly
|
||
by running its test suite. The default
|
||
<function>checkPhase</function> calls <command>make check</command>,
|
||
but only if the <varname>doCheck</varname> variable is enabled.</para>
|
||
|
||
<variablelist>
|
||
<title>Variables controlling the check phase</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>doCheck</varname></term>
|
||
<listitem><para>
|
||
Controls whether the check phase is executed.
|
||
By default it is skipped, but if <varname>doCheck</varname> is set to true, the check phase is usually executed.
|
||
Thus you should set <programlisting>doCheck = true;</programlisting> in the derivation to enable checks.
|
||
The exception is cross compilation.
|
||
Cross compiled builds never run tests, no matter how <varname>doCheck</varname> is set,
|
||
as the newly-built program won't run on the platform used to build it.
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>makeFlags</varname> /
|
||
<varname>makeFlagsArray</varname> /
|
||
<varname>makefile</varname></term>
|
||
<listitem><para>See the build phase for details.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>checkTarget</varname></term>
|
||
<listitem><para>The make target that runs the tests. Defaults to
|
||
<literal>check</literal>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>checkFlags</varname> / <varname>checkFlagsArray</varname></term>
|
||
<listitem><para>A list of strings passed as additional flags to
|
||
<command>make</command>. Like <varname>makeFlags</varname> and
|
||
<varname>makeFlagsArray</varname>, but only used by the check
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preCheck</varname></term>
|
||
<listitem><para>Hook executed at the start of the check
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>postCheck</varname></term>
|
||
<listitem><para>Hook executed at the end of the check
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="ssec-install-phase"><title>The install phase</title>
|
||
|
||
<para>The install phase is responsible for installing the package in
|
||
the Nix store under <envar>out</envar>. The default
|
||
<function>installPhase</function> creates the directory
|
||
<literal>$out</literal> and calls <command>make
|
||
install</command>.</para>
|
||
|
||
<variablelist>
|
||
<title>Variables controlling the install phase</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>makeFlags</varname> /
|
||
<varname>makeFlagsArray</varname> /
|
||
<varname>makefile</varname></term>
|
||
<listitem><para>See the build phase for details.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>installTargets</varname></term>
|
||
<listitem><para>The make targets that perform the installation.
|
||
Defaults to <literal>install</literal>. Example:
|
||
|
||
<programlisting>
|
||
installTargets = "install-bin install-doc";</programlisting>
|
||
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>installFlags</varname> / <varname>installFlagsArray</varname></term>
|
||
<listitem><para>A list of strings passed as additional flags to
|
||
<command>make</command>. Like <varname>makeFlags</varname> and
|
||
<varname>makeFlagsArray</varname>, but only used by the install
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preInstall</varname></term>
|
||
<listitem><para>Hook executed at the start of the install
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>postInstall</varname></term>
|
||
<listitem><para>Hook executed at the end of the install
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="ssec-fixup-phase"><title>The fixup phase</title>
|
||
|
||
<para>The fixup phase performs some (Nix-specific) post-processing
|
||
actions on the files installed under <filename>$out</filename> by the
|
||
install phase. The default <function>fixupPhase</function> does the
|
||
following:
|
||
|
||
<itemizedlist>
|
||
|
||
<listitem><para>It moves the <filename>man/</filename>,
|
||
<filename>doc/</filename> and <filename>info/</filename>
|
||
subdirectories of <envar>$out</envar> to
|
||
<filename>share/</filename>.</para></listitem>
|
||
|
||
<listitem><para>It strips libraries and executables of debug
|
||
information.</para></listitem>
|
||
|
||
<listitem><para>On Linux, it applies the <command>patchelf</command>
|
||
command to ELF executables and libraries to remove unused
|
||
directories from the <literal>RPATH</literal> in order to prevent
|
||
unnecessary runtime dependencies.</para></listitem>
|
||
|
||
<listitem><para>It rewrites the interpreter paths of shell scripts
|
||
to paths found in <envar>PATH</envar>. E.g.,
|
||
<filename>/usr/bin/perl</filename> will be rewritten to
|
||
<filename>/nix/store/<replaceable>some-perl</replaceable>/bin/perl</filename>
|
||
found in <envar>PATH</envar>.</para></listitem>
|
||
|
||
</itemizedlist>
|
||
|
||
</para>
|
||
|
||
<variablelist>
|
||
<title>Variables controlling the fixup phase</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>dontStrip</varname></term>
|
||
<listitem><para>If set, libraries and executables are not
|
||
stripped. By default, they are.</para></listitem>
|
||
</varlistentry>
|
||
<varlistentry>
|
||
<term><varname>dontStripHost</varname></term>
|
||
<listitem><para>
|
||
Like <varname>dontStripHost</varname>, but only affects the <command>strip</command> command targetting the package's host platform.
|
||
Useful when supporting cross compilation, but otherwise feel free to ignore.
|
||
</para></listitem>
|
||
</varlistentry>
|
||
<varlistentry>
|
||
<term><varname>dontStripTarget</varname></term>
|
||
<listitem><para>
|
||
Like <varname>dontStripHost</varname>, but only affects the <command>strip</command> command targetting the packages' target platform.
|
||
Useful when supporting cross compilation, but otherwise feel free to ignore.
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>dontMoveSbin</varname></term>
|
||
<listitem><para>If set, files in <filename>$out/sbin</filename> are not moved
|
||
to <filename>$out/bin</filename>. By default, they are.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>stripAllList</varname></term>
|
||
<listitem><para>List of directories to search for libraries and
|
||
executables from which <emphasis>all</emphasis> symbols should be
|
||
stripped. By default, it’s empty. Stripping all symbols is
|
||
risky, since it may remove not just debug symbols but also ELF
|
||
information necessary for normal execution.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>stripAllFlags</varname></term>
|
||
<listitem><para>Flags passed to the <command>strip</command>
|
||
command applied to the files in the directories listed in
|
||
<varname>stripAllList</varname>. Defaults to <option>-s</option>
|
||
(i.e. <option>--strip-all</option>).</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>stripDebugList</varname></term>
|
||
<listitem><para>List of directories to search for libraries and
|
||
executables from which only debugging-related symbols should be
|
||
stripped. It defaults to <literal>lib bin
|
||
sbin</literal>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>stripDebugFlags</varname></term>
|
||
<listitem><para>Flags passed to the <command>strip</command>
|
||
command applied to the files in the directories listed in
|
||
<varname>stripDebugList</varname>. Defaults to
|
||
<option>-S</option>
|
||
(i.e. <option>--strip-debug</option>).</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>dontPatchELF</varname></term>
|
||
<listitem><para>If set, the <command>patchelf</command> command is
|
||
not used to remove unnecessary <literal>RPATH</literal> entries.
|
||
Only applies to Linux.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>dontPatchShebangs</varname></term>
|
||
<listitem><para>If set, scripts starting with
|
||
<literal>#!</literal> do not have their interpreter paths
|
||
rewritten to paths in the Nix store.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>forceShare</varname></term>
|
||
<listitem><para>The list of directories that must be moved from
|
||
<filename>$out</filename> to <filename>$out/share</filename>.
|
||
Defaults to <literal>man doc info</literal>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>setupHook</varname></term>
|
||
<listitem><para>A package can export a <link
|
||
linkend="ssec-setup-hooks">setup hook</link> by setting this
|
||
variable. The setup hook, if defined, is copied to
|
||
<filename>$out/nix-support/setup-hook</filename>. Environment
|
||
variables are then substituted in it using <function
|
||
linkend="fun-substituteAll">substituteAll</function>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preFixup</varname></term>
|
||
<listitem><para>Hook executed at the start of the fixup
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>postFixup</varname></term>
|
||
<listitem><para>Hook executed at the end of the fixup
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry xml:id="stdenv-separateDebugInfo">
|
||
<term><varname>separateDebugInfo</varname></term>
|
||
<listitem><para>If set to <literal>true</literal>, the standard
|
||
environment will enable debug information in C/C++ builds. After
|
||
installation, the debug information will be separated from the
|
||
executables and stored in the output named
|
||
<literal>debug</literal>. (This output is enabled automatically;
|
||
you don’t need to set the <varname>outputs</varname> attribute
|
||
explicitly.) To be precise, the debug information is stored in
|
||
<filename><replaceable>debug</replaceable>/lib/debug/.build-id/<replaceable>XX</replaceable>/<replaceable>YYYY…</replaceable></filename>,
|
||
where <replaceable>XXYYYY…</replaceable> is the <replaceable>build
|
||
ID</replaceable> of the binary — a SHA-1 hash of the contents of
|
||
the binary. Debuggers like GDB use the build ID to look up the
|
||
separated debug information.</para>
|
||
|
||
<para>For example, with GDB, you can add
|
||
|
||
<programlisting>
|
||
set debug-file-directory ~/.nix-profile/lib/debug
|
||
</programlisting>
|
||
|
||
to <filename>~/.gdbinit</filename>. GDB will then be able to find
|
||
debug information installed via <literal>nix-env
|
||
-i</literal>.</para>
|
||
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
</section>
|
||
|
||
<section xml:id="ssec-installCheck-phase"><title>The installCheck phase</title>
|
||
|
||
<para>The installCheck phase checks whether the package was installed
|
||
correctly by running its test suite against the installed directories.
|
||
The default <function>installCheck</function> calls <command>make
|
||
installcheck</command>.</para>
|
||
|
||
<variablelist>
|
||
<title>Variables controlling the installCheck phase</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>doInstallCheck</varname></term>
|
||
<listitem><para>
|
||
Controls whether the installCheck phase is executed.
|
||
By default it is skipped, but if <varname>doInstallCheck</varname> is set to true, the installCheck phase is usually executed.
|
||
Thus you should set <programlisting>doInstallCheck = true;</programlisting> in the derivation to enable install checks.
|
||
The exception is cross compilation.
|
||
Cross compiled builds never run tests, no matter how <varname>doInstallCheck</varname> is set,
|
||
as the newly-built program won't run on the platform used to build it.
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preInstallCheck</varname></term>
|
||
<listitem><para>Hook executed at the start of the installCheck
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>postInstallCheck</varname></term>
|
||
<listitem><para>Hook executed at the end of the installCheck
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
</section>
|
||
|
||
<section xml:id="ssec-distribution-phase"><title>The distribution
|
||
phase</title>
|
||
|
||
<para>The distribution phase is intended to produce a source
|
||
distribution of the package. The default
|
||
<function>distPhase</function> first calls <command>make
|
||
dist</command>, then it copies the resulting source tarballs to
|
||
<filename>$out/tarballs/</filename>. This phase is only executed if
|
||
the attribute <varname>doDist</varname> is set.</para>
|
||
|
||
<variablelist>
|
||
<title>Variables controlling the distribution phase</title>
|
||
|
||
<varlistentry>
|
||
<term><varname>distTarget</varname></term>
|
||
<listitem><para>The make target that produces the distribution.
|
||
Defaults to <literal>dist</literal>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>distFlags</varname> / <varname>distFlagsArray</varname></term>
|
||
<listitem><para>Additional flags passed to
|
||
<command>make</command>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>tarballs</varname></term>
|
||
<listitem><para>The names of the source distribution files to be
|
||
copied to <filename>$out/tarballs/</filename>. It can contain
|
||
shell wildcards. The default is
|
||
<filename>*.tar.gz</filename>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>dontCopyDist</varname></term>
|
||
<listitem><para>If set, no files are copied to
|
||
<filename>$out/tarballs/</filename>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>preDist</varname></term>
|
||
<listitem><para>Hook executed at the start of the distribution
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>postDist</varname></term>
|
||
<listitem><para>Hook executed at the end of the distribution
|
||
phase.</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
|
||
</section>
|
||
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="ssec-stdenv-functions"><title>Shell functions</title>
|
||
|
||
<para>The standard environment provides a number of useful
|
||
functions.</para>
|
||
|
||
<variablelist>
|
||
|
||
|
||
<varlistentry xml:id='fun-makeWrapper'>
|
||
<term><function>makeWrapper</function>
|
||
<replaceable>executable</replaceable>
|
||
<replaceable>wrapperfile</replaceable>
|
||
<replaceable>args</replaceable></term>
|
||
<listitem><para>Constructs a wrapper for a program with various
|
||
possible arguments. For example:
|
||
|
||
<programlisting>
|
||
# adds `FOOBAR=baz` to `$out/bin/foo`’s environment
|
||
makeWrapper $out/bin/foo $wrapperfile --set FOOBAR baz
|
||
|
||
# prefixes the binary paths of `hello` and `git`
|
||
# Be advised that paths often should be patched in directly
|
||
# (via string replacements or in `configurePhase`).
|
||
makeWrapper $out/bin/foo $wrapperfile --prefix PATH : ${lib.makeBinPath [ hello git ]}
|
||
</programlisting>
|
||
|
||
There’s many more kinds of arguments, they are documented in
|
||
<literal>nixpkgs/pkgs/build-support/setup-hooks/make-wrapper.sh</literal>.</para>
|
||
|
||
<para><literal>wrapProgram</literal> is a convenience function you probably
|
||
want to use most of the time.</para>
|
||
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
|
||
<varlistentry xml:id='fun-substitute'>
|
||
<term><function>substitute</function>
|
||
<replaceable>infile</replaceable>
|
||
<replaceable>outfile</replaceable>
|
||
<replaceable>subs</replaceable></term>
|
||
|
||
<listitem>
|
||
<para>Performs string substitution on the contents of
|
||
<replaceable>infile</replaceable>, writing the result to
|
||
<replaceable>outfile</replaceable>. The substitutions in
|
||
<replaceable>subs</replaceable> are of the following form:
|
||
|
||
<variablelist>
|
||
<varlistentry>
|
||
<term><option>--replace</option>
|
||
<replaceable>s1</replaceable>
|
||
<replaceable>s2</replaceable></term>
|
||
<listitem><para>Replace every occurrence of the string
|
||
<replaceable>s1</replaceable> by
|
||
<replaceable>s2</replaceable>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><option>--subst-var</option>
|
||
<replaceable>varName</replaceable></term>
|
||
<listitem><para>Replace every occurrence of
|
||
<literal>@<replaceable>varName</replaceable>@</literal> by
|
||
the contents of the environment variable
|
||
<replaceable>varName</replaceable>. This is useful for
|
||
generating files from templates, using
|
||
<literal>@<replaceable>...</replaceable>@</literal> in the
|
||
template as placeholders.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><option>--subst-var-by</option>
|
||
<replaceable>varName</replaceable>
|
||
<replaceable>s</replaceable></term>
|
||
<listitem><para>Replace every occurrence of
|
||
<literal>@<replaceable>varName</replaceable>@</literal> by
|
||
the string <replaceable>s</replaceable>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
</para>
|
||
|
||
<para>Example:
|
||
|
||
<programlisting>
|
||
substitute ./foo.in ./foo.out \
|
||
--replace /usr/bin/bar $bar/bin/bar \
|
||
--replace "a string containing spaces" "some other text" \
|
||
--subst-var someVar
|
||
</programlisting>
|
||
|
||
</para>
|
||
|
||
<para><function>substitute</function> is implemented using the
|
||
<command
|
||
xlink:href="http://replace.richardlloyd.org.uk/">replace</command>
|
||
command. Unlike with the <command>sed</command> command, you
|
||
don’t have to worry about escaping special characters. It
|
||
supports performing substitutions on binary files (such as
|
||
executables), though there you’ll probably want to make sure
|
||
that the replacement string is as long as the replaced
|
||
string.</para>
|
||
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
|
||
<varlistentry xml:id='fun-substituteInPlace'>
|
||
<term><function>substituteInPlace</function>
|
||
<replaceable>file</replaceable>
|
||
<replaceable>subs</replaceable></term>
|
||
<listitem><para>Like <function>substitute</function>, but performs
|
||
the substitutions in place on the file
|
||
<replaceable>file</replaceable>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
|
||
<varlistentry xml:id='fun-substituteAll'>
|
||
<term><function>substituteAll</function>
|
||
<replaceable>infile</replaceable>
|
||
<replaceable>outfile</replaceable></term>
|
||
<listitem><para>Replaces every occurrence of
|
||
<literal>@<replaceable>varName</replaceable>@</literal>, where
|
||
<replaceable>varName</replaceable> is any environment variable, in
|
||
<replaceable>infile</replaceable>, writing the result to
|
||
<replaceable>outfile</replaceable>. For instance, if
|
||
<replaceable>infile</replaceable> has the contents
|
||
|
||
<programlisting>
|
||
#! @bash@/bin/sh
|
||
PATH=@coreutils@/bin
|
||
echo @foo@
|
||
</programlisting>
|
||
|
||
and the environment contains
|
||
<literal>bash=/nix/store/bmwp0q28cf21...-bash-3.2-p39</literal>
|
||
and
|
||
<literal>coreutils=/nix/store/68afga4khv0w...-coreutils-6.12</literal>,
|
||
but does not contain the variable <varname>foo</varname>, then the
|
||
output will be
|
||
|
||
<programlisting>
|
||
#! /nix/store/bmwp0q28cf21...-bash-3.2-p39/bin/sh
|
||
PATH=/nix/store/68afga4khv0w...-coreutils-6.12/bin
|
||
echo @foo@
|
||
</programlisting>
|
||
|
||
That is, no substitution is performed for undefined variables.</para>
|
||
|
||
<para>Environment variables that start with an uppercase letter or an
|
||
underscore are filtered out,
|
||
to prevent global variables (like <literal>HOME</literal>) or private
|
||
variables (like <literal>__ETC_PROFILE_DONE</literal>) from accidentally
|
||
getting substituted.
|
||
The variables also have to be valid bash “names”, as
|
||
defined in the bash manpage (alphanumeric or <literal>_</literal>,
|
||
must not start with a number).</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
|
||
<varlistentry xml:id='fun-substituteAllInPlace'>
|
||
<term><function>substituteAllInPlace</function>
|
||
<replaceable>file</replaceable></term>
|
||
<listitem><para>Like <function>substituteAll</function>, but performs
|
||
the substitutions in place on the file
|
||
<replaceable>file</replaceable>.</para></listitem>
|
||
</varlistentry>
|
||
|
||
|
||
<varlistentry xml:id='fun-stripHash'>
|
||
<term><function>stripHash</function>
|
||
<replaceable>path</replaceable></term>
|
||
<listitem><para>Strips the directory and hash part of a store
|
||
path, outputting the name part to <literal>stdout</literal>.
|
||
For example:
|
||
|
||
<programlisting>
|
||
# prints coreutils-8.24
|
||
stripHash "/nix/store/9s9r019176g7cvn2nvcw41gsp862y6b4-coreutils-8.24"
|
||
</programlisting>
|
||
|
||
If you wish to store the result in another variable, then the
|
||
following idiom may be useful:
|
||
|
||
<programlisting>
|
||
name="/nix/store/9s9r019176g7cvn2nvcw41gsp862y6b4-coreutils-8.24"
|
||
someVar=$(stripHash $name)
|
||
</programlisting>
|
||
|
||
</para></listitem>
|
||
</varlistentry>
|
||
|
||
|
||
<varlistentry xml:id='fun-wrapProgram'>
|
||
<term><function>wrapProgram</function>
|
||
<replaceable>executable</replaceable>
|
||
<replaceable>makeWrapperArgs</replaceable></term>
|
||
<listitem><para>Convenience function for <literal>makeWrapper</literal>
|
||
that automatically creates a sane wrapper file
|
||
|
||
It takes all the same arguments as <literal>makeWrapper</literal>,
|
||
except for <literal>--argv0</literal>.</para>
|
||
|
||
<para>It cannot be applied multiple times, since it will overwrite the wrapper
|
||
file.</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
|
||
</variablelist>
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="ssec-setup-hooks"><title>Package setup hooks</title>
|
||
|
||
<para>
|
||
Nix itself considers a build-time dependency merely something that should previously be built and accessible at build time—packages themselves are on their own to perform any additional setup.
|
||
In most cases, that is fine, and the downstream derivation can deal with it's own dependencies.
|
||
But for a few common tasks, that would result in almost every package doing the same sort of setup work---depending not on the package itself, but entirely on which dependencies were used.
|
||
</para>
|
||
<para>
|
||
In order to alleviate this burden, the <firstterm>setup hook></firstterm>mechanism was written, where any package can include a shell script that [by convention rather than enforcement by Nix], any downstream reverse-dependency will source as part of its build process.
|
||
That allows the downstream dependency to merely specify its dependencies, and lets those dependencies effectively initialize themselves.
|
||
No boilerplate mirroring the list of dependencies is needed.
|
||
</para>
|
||
<para>
|
||
The Setup hook mechanism is a bit of a sledgehammer though: a powerful feature with a broad and indiscriminate area of effect.
|
||
The combination of its power and implicit use may be expedient, but isn't without costs.
|
||
Nix itself is unchanged, but the spirit of adding dependencies being effect-free is violated even if the letter isn't.
|
||
For example, if a derivation path is mentioned more than once, Nix itself doesn't care and simply makes sure the dependency derivation is already built just the same—depending is just needing something to exist, and needing is idempotent.
|
||
However, a dependency specified twice will have its setup hook run twice, and that could easily change the build environment (though a well-written setup hook will therefore strive to be idempotent so this is in fact not observable).
|
||
More broadly, setup hooks are anti-modular in that multiple dependencies, whether the same or different, should not interfere and yet their setup hooks may well do so.
|
||
</para>
|
||
<para>
|
||
The most typical use of the setup hook is actually to add other hooks which are then run (i.e. after all the setup hooks) on each dependency.
|
||
For example, the C compiler wrapper's setup hook feeds itself flags for each dependency that contains relevant libaries and headers.
|
||
This is done by defining a bash function, and appending its name to one of
|
||
<envar>envBuildBuildHooks</envar>`,
|
||
<envar>envBuildHostHooks</envar>`,
|
||
<envar>envBuildTargetHooks</envar>`,
|
||
<envar>envHostHostHooks</envar>`,
|
||
<envar>envHostTargetHooks</envar>`, or
|
||
<envar>envTargetTargetHooks</envar>`.
|
||
These 6 bash variables correspond to the 6 sorts of dependencies by platform (there's 12 total but we ignore the propagated/non-propagated axis).
|
||
</para>
|
||
<para>
|
||
Packages adding a hook should not hard code a specific hook, but rather choose a variable <emphasis>relative</emphasis> to how they are included.
|
||
Returning to the C compiler wrapper example, if it itself is an <literal>n</literal> dependency, then it only wants to accumulate flags from <literal>n + 1</literal> dependencies, as only those ones match the compiler's target platform.
|
||
The <envar>hostOffset</envar> variable is defined with the current dependency's host offset <envar>targetOffset</envar> with its target offset, before it's setup hook is sourced.
|
||
Additionally, since most environment hooks don't care about the target platform,
|
||
That means the setup hook can append to the right bash array by doing something like
|
||
<programlisting language="bash">
|
||
addEnvHooks "$hostOffset" myBashFunction
|
||
</programlisting>
|
||
</para>
|
||
<para>
|
||
The <emphasis>existence</emphasis> of setups hooks has long been documented and packages inside Nixpkgs are free to use these mechanism.
|
||
Other packages, however, should not rely on these mechanisms not changing between Nixpkgs versions.
|
||
Because of the existing issues with this system, there's little benefit from mandating it be stable for any period of time.
|
||
</para>
|
||
<para>
|
||
Here are some packages that provide a setup hook.
|
||
Since the mechanism is modular, this probably isn't an exhaustive list.
|
||
Then again, since the mechanism is only to be used as a last resort, it might be.
|
||
<variablelist>
|
||
|
||
<varlistentry>
|
||
<term>Bintools Wrapper</term>
|
||
<listitem>
|
||
<para>
|
||
Bintools Wrapper wraps the binary utilities for a bunch of miscellaneous purposes.
|
||
These are GNU Binutils when targetting Linux, and a mix of cctools and GNU binutils for Darwin.
|
||
[The "Bintools" name is supposed to be a compromise between "Binutils" and "cctools" not denoting any specific implementation.]
|
||
Specifically, the underlying bintools package, and a C standard library (glibc or Darwin's libSystem, just for the dynamic loader) are all fed in, and dependency finding, hardening (see below), and purity checks for each are handled by Bintools Wrapper.
|
||
Packages typically depend on CC Wrapper, which in turn (at run time) depends on Bintools Wrapper.
|
||
</para>
|
||
<para>
|
||
Bintools Wrapper was only just recently split off from CC Wrapper, so the division of labor is still being worked out.
|
||
For example, it shouldn't care about about the C standard library, but just take a derivation with the dynamic loader (which happens to be the glibc on linux).
|
||
Dependency finding however is a task both wrappers will continue to need to share, and probably the most important to understand.
|
||
It is currently accomplished by collecting directories of host-platform dependencies (i.e. <varname>buildInputs</varname> and <varname>nativeBuildInputs</varname>) in environment variables.
|
||
Bintools Wrapper's setup hook causes any <filename>lib</filename> and <filename>lib64</filename> subdirectories to be added to <envar>NIX_LDFLAGS</envar>.
|
||
Since CC Wrapper and Bintools Wrapper use the same strategy, most of the Bintools Wrapper code is sparsely commented and refers to CC Wrapper.
|
||
But CC Wrapper's code, by contrast, has quite lengthy comments.
|
||
Bintools Wrapper merely cites those, rather than repeating them, to avoid falling out of sync.
|
||
</para>
|
||
<para>
|
||
A final task of the setup hook is defining a number of standard environment variables to tell build systems which executables full-fill which purpose.
|
||
They are defined to just be the base name of the tools, under the assumption that Bintools Wrapper's binaries will be on the path.
|
||
Firstly, this helps poorly-written packages, e.g. ones that look for just <command>gcc</command> when <envar>CC</envar> isn't defined yet <command>clang</command> is to be used.
|
||
Secondly, this helps packages not get confused when cross-compiling, in which case multiple Bintools Wrappers may simultaneously be in use.
|
||
<footnote><para>
|
||
Each wrapper targets a single platform, so if binaries for multiple platforms are needed, the underlying binaries must be wrapped multiple times.
|
||
As this is a property of the wrapper itself, the multiple wrappings are needed whether or not the same underlying binaries can target multiple platforms.
|
||
</para></footnote>
|
||
<envar>BUILD_</envar>- and <envar>TARGET_</envar>-prefixed versions of the normal environment variable are defined for the additional Bintools Wrappers, properly disambiguating them.
|
||
</para>
|
||
<para>
|
||
A problem with this final task is that Bintools Wrapper is honest and defines <envar>LD</envar> as <command>ld</command>.
|
||
Most packages, however, firstly use the C compiler for linking, secondly use <envar>LD</envar> anyways, defining it as the C compiler, and thirdly, only so define <envar>LD</envar> when it is undefined as a fallback.
|
||
This triple-threat means Bintools Wrapper will break those packages, as LD is already defined as the actual linker which the package won't override yet doesn't want to use.
|
||
The workaround is to define, just for the problematic package, <envar>LD</envar> as the C compiler.
|
||
A good way to do this would be <command>preConfigure = "LD=$CC"</command>.
|
||
</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>CC Wrapper</term>
|
||
<listitem>
|
||
<para>
|
||
CC Wrapper wraps a C toolchain for a bunch of miscellaneous purposes.
|
||
Specifically, a C compiler (GCC or Clang), wrapped binary tools, and a C standard library (glibc or Darwin's libSystem, just for the dynamic loader) are all fed in, and dependency finding, hardening (see below), and purity checks for each are handled by CC Wrapper.
|
||
Packages typically depend on CC Wrapper, which in turn (at run time) depends on Bintools Wrapper.
|
||
</para>
|
||
<para>
|
||
Dependency finding is undoubtedly the main task of CC Wrapper.
|
||
This works just like Bintools Wrapper, except that any <filename>include</filename> subdirectory of any relevant dependency is added to <envar>NIX_CFLAGS_COMPILE</envar>.
|
||
The setup hook itself contains some lengthy comments describing the exact convoluted mechanism by which this is accomplished.
|
||
</para>
|
||
<para>
|
||
CC Wrapper also like Bintools Wrapper defines standard environment variables with the names of the tools it wraps, for the same reasons described above.
|
||
Importantly, while it includes a <command>cc</command> symlink to the c compiler for portability, the <envar>CC</envar> will be defined using the compiler's "real name" (i.e. <command>gcc</command> or <command>clang</command>).
|
||
This helps lousy build systems that inspect on the name of the compiler rather than run it.
|
||
</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>Perl</term>
|
||
<listitem>
|
||
<para>
|
||
Adds the <filename>lib/site_perl</filename> subdirectory of each build input to the <envar>PERL5LIB</envar> environment variable.
|
||
For instance, if <varname>buildInputs</varname> contains Perl, then the <filename>lib/site_perl</filename> subdirectory of each input is added to the <envar>PERL5LIB</envar> environment variable.
|
||
</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>Python</term>
|
||
<listitem><para>Adds the
|
||
<filename>lib/${python.libPrefix}/site-packages</filename> subdirectory of
|
||
each build input to the <envar>PYTHONPATH</envar> environment
|
||
variable.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>pkg-config</term>
|
||
<listitem><para>Adds the <filename>lib/pkgconfig</filename> and
|
||
<filename>share/pkgconfig</filename> subdirectories of each
|
||
build input to the <envar>PKG_CONFIG_PATH</envar> environment
|
||
variable.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>Automake</term>
|
||
<listitem><para>Adds the <filename>share/aclocal</filename>
|
||
subdirectory of each build input to the <envar>ACLOCAL_PATH</envar>
|
||
environment variable.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>Autoconf</term>
|
||
<listitem><para>The <varname>autoreconfHook</varname> derivation adds
|
||
<varname>autoreconfPhase</varname>, which runs autoreconf, libtoolize and
|
||
automake, essentially preparing the configure script in autotools-based
|
||
builds.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>libxml2</term>
|
||
<listitem><para>Adds every file named
|
||
<filename>catalog.xml</filename> found under the
|
||
<filename>xml/dtd</filename> and <filename>xml/xsl</filename>
|
||
subdirectories of each build input to the
|
||
<envar>XML_CATALOG_FILES</envar> environment
|
||
variable.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>teTeX / TeX Live</term>
|
||
<listitem><para>Adds the <filename>share/texmf-nix</filename>
|
||
subdirectory of each build input to the <envar>TEXINPUTS</envar>
|
||
environment variable.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>Qt 4</term>
|
||
<listitem><para>Sets the <envar>QTDIR</envar> environment variable
|
||
to Qt’s path.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>gdk-pixbuf</term>
|
||
<listitem><para>Exports <envar>GDK_PIXBUF_MODULE_FILE</envar>
|
||
environment variable the the builder. Add librsvg package
|
||
to <varname>buildInputs</varname> to get svg support.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>GHC</term>
|
||
<listitem><para>Creates a temporary package database and registers
|
||
every Haskell build input in it (TODO: how?).</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>GStreamer</term>
|
||
<listitem><para>Adds the
|
||
GStreamer plugins subdirectory of
|
||
each build input to the <envar>GST_PLUGIN_SYSTEM_PATH_1_0</envar> or
|
||
<envar>GST_PLUGIN_SYSTEM_PATH</envar> environment variable.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>paxctl</term>
|
||
<listitem><para>Defines the <varname>paxmark</varname> helper for
|
||
setting per-executable PaX flags on Linux (where it is available by
|
||
default; on all other platforms, <varname>paxmark</varname> is a no-op).
|
||
For example, to disable secure memory protections on the executable
|
||
<replaceable>foo</replaceable>:
|
||
<programlisting>
|
||
postFixup = ''
|
||
paxmark m $out/bin/<replaceable>foo</replaceable>
|
||
'';
|
||
</programlisting>
|
||
The <literal>m</literal> flag is the most common flag and is typically
|
||
required for applications that employ JIT compilation or otherwise need to
|
||
execute code generated at run-time. Disabling PaX protections should be
|
||
considered a last resort: if possible, problematic features should be
|
||
disabled or patched to work with PaX.</para></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term>autoPatchelfHook</term>
|
||
<listitem><para>This is a special setup hook which helps in packaging
|
||
proprietary software in that it automatically tries to find missing shared
|
||
library dependencies of ELF files. All packages within the
|
||
<envar>runtimeDependencies</envar> environment variable are unconditionally
|
||
added to executables, which is useful for programs that use
|
||
<citerefentry>
|
||
<refentrytitle>dlopen</refentrytitle>
|
||
<manvolnum>3</manvolnum>
|
||
</citerefentry>
|
||
to load libraries at runtime.</para></listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
</para>
|
||
|
||
</section>
|
||
|
||
|
||
<section xml:id="sec-purity-in-nixpkgs"><title>Purity in Nixpkgs</title>
|
||
|
||
<para>[measures taken to prevent dependencies on packages outside the
|
||
store, and what you can do to prevent them]</para>
|
||
|
||
<para>GCC doesn't search in locations such as
|
||
<filename>/usr/include</filename>. In fact, attempts to add such
|
||
directories through the <option>-I</option> flag are filtered out.
|
||
Likewise, the linker (from GNU binutils) doesn't search in standard
|
||
locations such as <filename>/usr/lib</filename>. Programs built on
|
||
Linux are linked against a GNU C Library that likewise doesn't search
|
||
in the default system locations.</para>
|
||
|
||
</section>
|
||
|
||
<section xml:id="sec-hardening-in-nixpkgs"><title>Hardening in Nixpkgs</title>
|
||
|
||
<para>There are flags available to harden packages at compile or link-time.
|
||
These can be toggled using the <varname>stdenv.mkDerivation</varname> parameters
|
||
<varname>hardeningDisable</varname> and <varname>hardeningEnable</varname>.
|
||
</para>
|
||
|
||
<para>
|
||
Both parameters take a list of flags as strings. The special
|
||
<varname>"all"</varname> flag can be passed to <varname>hardeningDisable</varname>
|
||
to turn off all hardening. These flags can also be used as environment variables
|
||
for testing or development purposes.
|
||
</para>
|
||
|
||
<para>The following flags are enabled by default and might require disabling with
|
||
<varname>hardeningDisable</varname> if the program to package is incompatible.
|
||
</para>
|
||
|
||
<variablelist>
|
||
|
||
<varlistentry>
|
||
<term><varname>format</varname></term>
|
||
<listitem><para>Adds the <option>-Wformat -Wformat-security
|
||
-Werror=format-security</option> compiler options. At present,
|
||
this warns about calls to <varname>printf</varname> and
|
||
<varname>scanf</varname> functions where the format string is
|
||
not a string literal and there are no format arguments, as in
|
||
<literal>printf(foo);</literal>. This may be a security hole
|
||
if the format string came from untrusted input and contains
|
||
<literal>%n</literal>.</para>
|
||
|
||
<para>This needs to be turned off or fixed for errors similar to:</para>
|
||
|
||
<programlisting>
|
||
/tmp/nix-build-zynaddsubfx-2.5.2.drv-0/zynaddsubfx-2.5.2/src/UI/guimain.cpp:571:28: error: format not a string literal and no format arguments [-Werror=format-security]
|
||
printf(help_message);
|
||
^
|
||
cc1plus: some warnings being treated as errors
|
||
</programlisting></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>stackprotector</varname></term>
|
||
<listitem>
|
||
<para>Adds the <option>-fstack-protector-strong
|
||
--param ssp-buffer-size=4</option>
|
||
compiler options. This adds safety checks against stack overwrites
|
||
rendering many potential code injection attacks into aborting situations.
|
||
In the best case this turns code injection vulnerabilities into denial
|
||
of service or into non-issues (depending on the application).</para>
|
||
|
||
<para>This needs to be turned off or fixed for errors similar to:</para>
|
||
|
||
<programlisting>
|
||
bin/blib.a(bios_console.o): In function `bios_handle_cup':
|
||
/tmp/nix-build-ipxe-20141124-5cbdc41.drv-0/ipxe-5cbdc41/src/arch/i386/firmware/pcbios/bios_console.c:86: undefined reference to `__stack_chk_fail'
|
||
</programlisting></listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>fortify</varname></term>
|
||
<listitem>
|
||
<para>Adds the <option>-O2 -D_FORTIFY_SOURCE=2</option> compiler
|
||
options. During code generation the compiler knows a great deal of
|
||
information about buffer sizes (where possible), and attempts to replace
|
||
insecure unlimited length buffer function calls with length-limited ones.
|
||
This is especially useful for old, crufty code. Additionally, format
|
||
strings in writable memory that contain '%n' are blocked. If an application
|
||
depends on such a format string, it will need to be worked around.
|
||
</para>
|
||
|
||
<para>Additionally, some warnings are enabled which might trigger build
|
||
failures if compiler warnings are treated as errors in the package build.
|
||
In this case, set <option>NIX_CFLAGS_COMPILE</option> to
|
||
<option>-Wno-error=warning-type</option>.</para>
|
||
|
||
<para>This needs to be turned off or fixed for errors similar to:</para>
|
||
|
||
<programlisting>
|
||
malloc.c:404:15: error: return type is an incomplete type
|
||
malloc.c:410:19: error: storage size of 'ms' isn't known
|
||
</programlisting>
|
||
<programlisting>
|
||
strdup.h:22:1: error: expected identifier or '(' before '__extension__'
|
||
</programlisting>
|
||
<programlisting>
|
||
strsep.c:65:23: error: register name not specified for 'delim'
|
||
</programlisting>
|
||
<programlisting>
|
||
installwatch.c:3751:5: error: conflicting types for '__open_2'
|
||
</programlisting>
|
||
<programlisting>
|
||
fcntl2.h:50:4: error: call to '__open_missing_mode' declared with attribute error: open with O_CREAT or O_TMPFILE in second argument needs 3 arguments
|
||
</programlisting>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>pic</varname></term>
|
||
<listitem>
|
||
<para>Adds the <option>-fPIC</option> compiler options. This options adds
|
||
support for position independent code in shared libraries and thus making
|
||
ASLR possible.</para>
|
||
<para>Most notably, the Linux kernel, kernel modules and other code
|
||
not running in an operating system environment like boot loaders won't
|
||
build with PIC enabled. The compiler will is most cases complain that
|
||
PIC is not supported for a specific build.
|
||
</para>
|
||
|
||
<para>This needs to be turned off or fixed for assembler errors similar to:</para>
|
||
|
||
<programlisting>
|
||
ccbLfRgg.s: Assembler messages:
|
||
ccbLfRgg.s:33: Error: missing or invalid displacement expression `private_key_len@GOTOFF'
|
||
</programlisting>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>strictoverflow</varname></term>
|
||
<listitem>
|
||
<para>Signed integer overflow is undefined behaviour according to the C
|
||
standard. If it happens, it is an error in the program as it should check
|
||
for overflow before it can happen, not afterwards. GCC provides built-in
|
||
functions to perform arithmetic with overflow checking, which are correct
|
||
and faster than any custom implementation. As a workaround, the option
|
||
<option>-fno-strict-overflow</option> makes gcc behave as if signed
|
||
integer overflows were defined.
|
||
</para>
|
||
|
||
<para>This flag should not trigger any build or runtime errors.</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>relro</varname></term>
|
||
<listitem>
|
||
<para>Adds the <option>-z relro</option> linker option. During program
|
||
load, several ELF memory sections need to be written to by the linker,
|
||
but can be turned read-only before turning over control to the program.
|
||
This prevents some GOT (and .dtors) overwrite attacks, but at least the
|
||
part of the GOT used by the dynamic linker (.got.plt) is still vulnerable.
|
||
</para>
|
||
|
||
<para>This flag can break dynamic shared object loading. For instance, the
|
||
module systems of Xorg and OpenCV are incompatible with this flag. In almost
|
||
all cases the <varname>bindnow</varname> flag must also be disabled and
|
||
incompatible programs typically fail with similar errors at runtime.</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
<varlistentry>
|
||
<term><varname>bindnow</varname></term>
|
||
<listitem>
|
||
<para>Adds the <option>-z bindnow</option> linker option. During program
|
||
load, all dynamic symbols are resolved, allowing for the complete GOT to
|
||
be marked read-only (due to <varname>relro</varname>). This prevents GOT
|
||
overwrite attacks. For very large applications, this can incur some
|
||
performance loss during initial load while symbols are resolved, but this
|
||
shouldn't be an issue for daemons.
|
||
</para>
|
||
|
||
<para>This flag can break dynamic shared object loading. For instance, the
|
||
module systems of Xorg and PHP are incompatible with this flag. Programs
|
||
incompatible with this flag often fail at runtime due to missing symbols,
|
||
like:</para>
|
||
|
||
<programlisting>
|
||
intel_drv.so: undefined symbol: vgaHWFreeHWRec
|
||
</programlisting>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
<para>The following flags are disabled by default and should be enabled
|
||
with <varname>hardeningEnable</varname> for packages that take untrusted
|
||
input like network services.
|
||
</para>
|
||
|
||
<variablelist>
|
||
|
||
<varlistentry>
|
||
<term><varname>pie</varname></term>
|
||
<listitem>
|
||
<para>Adds the <option>-fPIE</option> compiler and <option>-pie</option>
|
||
linker options. Position Independent Executables are needed to take
|
||
advantage of Address Space Layout Randomization, supported by modern
|
||
kernel versions. While ASLR can already be enforced for data areas in
|
||
the stack and heap (brk and mmap), the code areas must be compiled as
|
||
position-independent. Shared libraries already do this with the
|
||
<varname>pic</varname> flag, so they gain ASLR automatically, but binary
|
||
.text regions need to be build with <varname>pie</varname> to gain ASLR.
|
||
When this happens, ROP attacks are much harder since there are no static
|
||
locations to bounce off of during a memory corruption attack.
|
||
</para>
|
||
</listitem>
|
||
</varlistentry>
|
||
|
||
</variablelist>
|
||
|
||
<para>For more in-depth information on these hardening flags and hardening in
|
||
general, refer to the
|
||
<link xlink:href="https://wiki.debian.org/Hardening">Debian Wiki</link>,
|
||
<link xlink:href="https://wiki.ubuntu.com/Security/Features">Ubuntu Wiki</link>,
|
||
<link xlink:href="https://wiki.gentoo.org/wiki/Project:Hardened">Gentoo Wiki</link>,
|
||
and the <link xlink:href="https://wiki.archlinux.org/index.php/DeveloperWiki:Security">
|
||
Arch Wiki</link>.
|
||
</para>
|
||
|
||
</section>
|
||
|
||
</chapter>
|