1
0
Fork 1
mirror of https://github.com/NixOS/nixpkgs.git synced 2024-12-25 03:17:13 +00:00
nixpkgs/nixos/modules/installer/cd-dvd/sd-image-aarch64.nix
Tuomas Tynkkynen 931aa5f9e2 U-Boot: 2017.03 -> 2017.11
Also move patches from sd-image-aarch64.nix, they might be useful for
the older raspberries as well.
2017-11-18 13:57:17 +02:00

56 lines
1.8 KiB
Nix

# To build, use:
# nix-build nixos -I nixos-config=nixos/modules/installer/cd-dvd/sd-image-aarch64.nix -A config.system.build.sdImage
{ config, lib, pkgs, ... }:
let
extlinux-conf-builder =
import ../../system/boot/loader/generic-extlinux-compatible/extlinux-conf-builder.nix {
inherit pkgs;
};
in
{
imports = [
../../profiles/base.nix
../../profiles/installation-device.nix
./sd-image.nix
];
assertions = lib.singleton {
assertion = pkgs.stdenv.system == "aarch64-linux";
message = "sd-image-aarch64.nix can be only built natively on Aarch64 / ARM64; " +
"it cannot be cross compiled";
};
# Needed by RPi firmware
nixpkgs.config.allowUnfree = true;
boot.loader.grub.enable = false;
boot.loader.generic-extlinux-compatible.enable = true;
boot.kernelPackages = pkgs.linuxPackages_latest;
# The serial ports listed here are:
# - ttyS0: for Tegra (Jetson TX1)
# - ttyAMA0: for QEMU's -machine virt
# Also increase the amount of CMA to ensure the virtual console on the RPi3 works.
boot.kernelParams = ["cma=32M" "console=ttyS0,115200n8" "console=ttyAMA0,115200n8" "console=tty0"];
# FIXME: this probably should be in installation-device.nix
users.extraUsers.root.initialHashedPassword = "";
sdImage = {
populateBootCommands = let
configTxt = pkgs.writeText "config.txt" ''
kernel=u-boot-rpi3.bin
arm_control=0x200
enable_uart=1
'';
in ''
(cd ${pkgs.raspberrypifw}/share/raspberrypi/boot && cp bootcode.bin fixup*.dat start*.elf $NIX_BUILD_TOP/boot/)
cp ${pkgs.ubootRaspberryPi3_64bit}/u-boot.bin boot/u-boot-rpi3.bin
cp ${configTxt} boot/config.txt
${extlinux-conf-builder} -t 3 -c ${config.system.build.toplevel} -d ./boot
'';
};
}