Forcibly restarting NSCD is unnecessary and breaks setups that use SSSD for
authentication. NSCD is capable of detecting changes to /etc/resolv.conf and
invalidating its caches internally. Restarting NSCD/SSSD breaks user name and
UID resolution.
The usage of nixpkgs.config.packageOverrides is deprecated and we do
have overlays since quite a while.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @edolstra
When doing source routing/multihoming, it's practical to give names to routing
tables. The absence of the rt_table file in /etc make this impossible.
This patch recreates these files on rebuild so that they can be modified
by the user see NixOS#38638.
iproute2 is modified to look into config.networking.iproute2.confDir instead of
/etc/iproute2.
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
With #36556, a check was introduced to make sure the user and group
names do not exceed their respective maximum length. This is in part
because systemd also enforces that length, but only at runtime.
So in general it's a good idea to catch as much as we can during
evaluation time, however the maximum length of the group name was set to
16 characters according groupadd(8).
The maximum length of the group names however is a compile-time option
and even systemd allows more than 16 characters. In the mentioned pull
request (#36556) there was already a report that this has broken
evaluation for people out there.
I have also checked what other distributions are doing and they set the
length to either 31 characters or 32 characters, the latter being more
common.
Unfortunately there is a difference between the maximum length enforced
by the shadow package and systemd, both for user name lengths and group
name lengths. However, systemd enforces both length to have a maximum of
31 characters and I'm not sure if this is intended or just a off-by-one
error in systemd.
Nevertheless, I choose 32 characters simply to bring it in par with the
maximum user name length.
For the NixOS assertion however, I use a maximum length of 31 to make
sure that nobody accidentally creates services that contain group names
that systemd considers invalid because of a length of 32 characters.
Signed-off-by: aszlig <aszlig@nix.build>
Closes: #38548
Cc: @vcunat, @fpletz, @qknight
Currently broken on NixOS due to hardcoded modprobe binary path (see
bug #30756 from Oct 2017), no activity on a proposed fix for months.
As the protocol is terribly broken anyways, let's better remove it
completely, and not talk about anymore ;-)
Closes #30756.
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):
pkgs/development/libraries/epoxy/default.nix
pkgs/development/libraries/gtk+/3.x.nix
pkgs/development/python-modules/asgiref/default.nix
pkgs/development/python-modules/daphne/default.nix
pkgs/os-specific/linux/systemd/default.nix
`nixos-generate-config` detects the `cpuFreqGovernor` suited best for my
machine, e.g. `powerManagement.cpuFreqGovernor = lib.mkDefault "powersave";`.
However the `powerManagement` module sets a sensitive default for
`cpuFreqGovernor` using `mkDefault` to avoid breackage with older
setups. Since 140ac2f1 the `hardware-configuration.nix` sets the
gorvernor with `mkDefault` as well which causes evaluation errors if the
powermanagement module is enabled:
```
error: The unique option `powerManagement.cpuFreqGovernor' is defined multiple times, in `/home/ma27/Projects/nixos-config/hardware-configuration.nix' and `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/nixos/modules/config/power-management.nix'.
```
Using `mkOptionDefault` rather than `mkDefault` in the powermanagement
module fixes this issue as it decreases the priority of the module and
prefers the value set in `hardware-configuration.nix`.
I have confirmed the change using the following VM declaration:
```
{
cpuFreq = { lib, ... }: {
powerManagement.cpuFreqGovernor = lib.mkDefault "powersave";
powerManagement.enable = true;
};
}
```
- /var/run -> /run as the former is deprecated
- configure openal to use pulseaudio if pulseaudio is enabled
- configure libao to use pulseaudio if pulseaudio is enabled
Commit 987aac7 and issue #18183 were intended to fix support for other
things, but in the process, changed mdns_minimal to use the wrong return
setting, resulting in permanent failures in early boot, affecting things
like issue #30459.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This reverts commit 670b4e29ad. The change
added in this commit was controversial when it was originally suggested
in https://github.com/NixOS/nixpkgs/pull/29205. Then that PR was closed
and a new one opened, https://github.com/NixOS/nixpkgs/pull/29503,
effectively circumventing the review process. I don't agree with this
modification. Adding an option 'resolveLocalQueries' to tell the locally
running name server that it should resolve local DNS queries feels
outright nuts. I agree that the current state is unsatisfactory and that
it should be improved, but this is not the right way.
(cherry picked from commit 23a021d12e)
When the user specifies the networking.nameservers setting in the
configuration file, it must take precedence over automatically
derived settings.
The culprit was services.bind that made the resolver set to
127.0.0.1 and ignore the nameserver setting.
This patch adds a flag to services.bind to override the nameserver
to localhost. It defaults to true. Setting this to false prevents the
service.bind and dnsmasq.resolveLocalQueries settings from
overriding the users' settings.
Also, when the user specifies a domain to search, it must be set in
the resolver configuration, even if the user does not specify any
nameservers.
(cherry picked from commit 670b4e29ad)
This commit was accidentally merged to 17.09 but was intended for
master. This is the cherry-pick to master.
In order for DynamicUser = true to work in services, we need the
nss-systemd module to be able to resolve the user and group names
generated dynamically.
Evaluation error introduced in a0d464033c.
If the value for timeZone is null it shouldn't be even tried to coerce
it into a string.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @lheckemann, @joachifm
Creating and then erasing the key relies on the disk erasing data
correctly, and otherwise allows attackers to simply decrypt swap just
using "secretkey". We don't actually need a LUKS header, so we can save
ourselves some pointless disk writes and identifiability.
In addition, I wouldn't have made the awful mistake of backing up my swap partition's LUKS header instead of my zpool's. May my data rest in peace.
While systemd suggests using the pre-defined graphical-session user
target, I found that this interface is difficult to use. Additionally,
no other major distribution, even in their unstable versions, currently
use this mechanism.
The window or desktop manager is supposed to run in a systemd user service
which activates graphical-session.target and the user services that are
binding to this target. The issue is that we can't elegantly pass the
xsession environment to the window manager session, in particular
whereas the PassEnvironment option does work for DISPLAY, it for some
mysterious reason won't for PATH.
This commit implements a new graphical user target that works just like
default.target. Services which should be run in a graphical session just
need to declare wantedBy graphical.target. The graphical target will be
activated in the xsession before executing the window or display manager.
Fixes #17858.
gyre-fonts provides high-quality TrueType substitutes for standard PostScript
fonts. Unlike most other distributions, NixOS does not install Ghostscript and
its Type 1 fonts by default, so we must get the standard fonts elsewhere.
When a user or group is revived, this allows it to be allocated the
UID/GID it had before.
A consequence is that UIDs and GIDs are no longer reused.
Fixes #24010.
The inability to run strace or gdb is the kind of
developer-unfriendliness that we're used to from OS X, let's not do it
on NixOS.
This restriction can be re-enabled by setting
boot.kernel.sysctl."kernel.yama.ptrace_scope" = 1;
It might be nice to have a NixOS module for enabling hardened defaults.
Xref #14392.
Thanks @abbradar.
The Infinality bytecode interpreter is removed in favor of the new v40 TrueType
interpreter. In the past, the Infinality interpreter provided support for
ClearType-style hinting instructions while the default interpreter (then v35)
provided support only for original TrueType-style instructions. The v40
interpreter corrects this deficiency, so the Infinality interpreter is no longer
necessary.
To understand why the Infinality interpreter is no longer necessary, we should
understand how ClearType differs from TrueType and how the v40 interpreter
works. The following is a summary of information available on the FreeType
website [1] mixed with my own editorializing.
TrueType instructions use horizontal and vertical hints to improve glyph
rendering. Before TrueType, fonts were only vertically hinted; horizontal hints
improved rendering by snapping stems to pixel boundaries. Horizontal hinting is
a risk because it can significantly distort glyph shapes and kerning. Extensive
testing at different resolutions is needed to perfect the TrueType
hints. Microsoft invested significant effort to do this with its "Core fonts for
the Web" project, but few other typefaces have seen this level of attention.
With the advent of subpixel rendering, the effective horizontal resolution of
most displays increased significantly. ClearType eschews horizontal hinting in
favor of horizontal supersampling. Most fonts are designed for the Microsoft
bytecode interpreter, which implements a compatibility mode with
TrueType-style (horizontal and vertical) instructions. However, applying the
full horizontal hints to subpixel-rendered fonts leads to color fringes and
inconsistent stem widths. The Infinality interpreter implements several
techniques to mitigate these problems, going so far as to embed font- and
glyph-specific hacks in the interpreter. On the other hand, the v40 interpreter
ignores the horizontal hinting instructions so that glyphs render as they are
intended to on the Microsoft interpreter. Without the horizontal hints, the
problems of glyph and kerning distortion, color fringes, and inconsistent stem
widths--the problems the Infinality interpreter was created to solve--simply
don't occur in the first place.
There are also security concerns which motivate removing the Infinality patches.
Although there is an updated version of the Infinality interpreter for FreeType
2.7, the lack of a consistent upstream maintainer is a security concern. The
interpreter is a Turing-complete virtual machine which has had security
vulnerabilities in the past. While the default interpreter is used in billions
of devices and is maintained by an active developer, the Infinality interpreter
is neither scrutinized nor maintained. We will probably never know if there are
defects in the Infinality interpreter, and if they were discovered they would
likely never be fixed. I do not think that is an acceptable situtation for a
core library like FreeType.
Dropping the Infinality patches means that font rendering will be less
customizable. I think this is an acceptable trade-off. The Infinality
interpreter made many compromises to mitigate the problems with horizontal
hinting; the main purpose of customization is to tailor these compromises to the
user's preferences. The new interpreter does not have to make these compromises
because it renders fonts as their designers intended, so this level of
customization is not necessary.
The Infinality-associated patches are also removed from cairo. These patches
only set the default rendering options in case they aren't set though
Fontconfig. On NixOS, the rendering options are always set in Fontconfig, so
these patches never actually did anything for us!
The Fontconfig test suite is patched to account for a quirk in the way PCF fonts
are named.
The fontconfig option `hintstyle` is no longer configurable in NixOS. This
option selects the TrueType interpreter; the v40 interpreter is `hintslight` and
the older v35 interpreter is `hintmedium` or `hintfull` (which have actually
always been the same thing). The setting may still be changed through the
`localConf` option or by creating a user Fontconfig file.
Users with HiDPI displays should probably disable hinting and antialiasing: at
best they have no visible effect.
The fontconfig-ultimate settings are still available in NixOS, but they are no
longer the default. They still work, but their main purpose is to set rendering
quirks which are no longer necessary and may actually be
detrimental (e.g. setting `hintfull` for some fonts). Also, the vast array of
font substitutions provided is not an appropriate default; the default setting
should be to give the user the font they asked for.
[1]. https://www.freetype.org/freetype2/docs/subpixel-hinting.html
Overriding ``glibcLocales`` via nixpkgs.overlays not works,
so I added i18n.glibcLocales parameter, defaulted with
old override, using i18n.supportedLocales.
This adds pulseaudio.daemon.config, which is a set of keys to values
which are directly translated to keys and values of pulseaudio's
daemon.conf, e. g.
hardware.pulseaudio.daemon.config = { flat-volumes = "no"; }
becomes
flat-volumes=no
in pulse/daemon.conf.
I have left in 2 NixOS custom config directives, so the configuration
should be the same with the only change in behaviour being that the
service is not eagerly loaded but in fact only socket activated, which
it should be.
perlPackages.TextWrapI18N: init at 0.06
perlPackages.Po4a: init at 0.47
jade: init at 1.2.1
ding-libs: init at 0.6.0
Switch nscd to no-caching mode if SSSD is enabled.
abbradar: disable jade parallel building.
Closes #21150
* cpu-freq: Try powersave if ondemand is not available
* Revert "cpu-freq: Try powersave if ondemand is not available"
This reverts commit 4dc56db37e.
Consult available scaling governors; for freshly generated configs, this provides a better experience than relying on a default that might not work everywhere.
- most nixos user only require time synchronisation,
while ntpd implements a battery-included ntp server (1,215 LOCs of C-Code vs 64,302)
- timesyncd support ntp server per interface (if configured through dhcp for instance)
- timesyncd is already included in the systemd package, switching to it would
save a little disk space (1,5M)
Using "tmpfs" as a script part for system.activationScripts is a bit
misleading since 6efcfe03ae.
We no longer solely mount tmpfs within this script, so using "specialfs"
fits more nicely in terms of naming.
Tested against the "simple" NixOS installer test.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Systemd upstream provides targets for networking. This also includes a target network-online.target.
In this PR I remove / replace most occurrences since some of them were even wrong and could delay startup.
We were pulling in 44 MiB of fonts in the default configuration, which
is a bit excessive for headless configurations like EC2
instances. Note that dejavu_minimal ensures that remote X11-forwarded
applications still have a basic font regardless.
This reverts commit 582313bafe.
Removing rsync is actually pointless because nixos-install depends on
it. So if it's part of the system closure, we may as well provide it
to users.
Probably with the next Nix release we can drop the use of rsync and
use "nix copy" instead.
This one was already merged into release-16.09, so let's not have the
stable branch is ahead of master and confuse things. In addition to
that, currently we have an odd situation that master has less things
actually finished building than in staging.
Conflicts:
pkgs/data/documentation/man-pages/default.nix
Verified that following nixos configuration:
users.users.foo = {
uid = 1000;
name = "foo";
};
users.users.bar = {
name = "bar";
};
Before this commit both users will get uid of 1000, after it's applied
bar will correctly get 1001.
The fontconfig-ultimate patches are unmaintained. Since they were
not updated for newer FreeType versions, this removes them and
disables fontconfig-ultimate by default.
This removes our hardcoded presets which weren't updated for quite some time.
Infinality now has new hardcoded presets in freetype, which can be overriden if
desired with environment variables (as before). Accordingly, updated NixOS
module to set the hardcoded preset.
Additionally used a more "right" type for substitutions.
Adds options for tcp streaming and avahi zeroconf support (so that the
server can be easily found by clients).
There is also an option to allow anonymous clients to stream to the
server (by default pulseaudio uses a cookie mechanism, see manpage).
Currently NixOS creates the swapfile (with the specified size) only if
it doesn't already exist. Changing the swapfile size afterwards will not
have any effect.
This commit changes that so the swapfile will be recreated whenever
swapDevices.*.size is changed (or more precisely, whenever the actual
file size differs from the configured one), allowing both growing and
shrinking the swapfile.
The service unit has "restartIfChanged = false", so we don't have to
worry about the swapfile being in use at the time this code is run (you
have to reboot for swapfile changes).
fallocate doesn't shrink files, use truncate for that. truncate can also
be used to grow files, but it creates "holes" in the file which doesn't
work with swapfiles.
