Add a new option permitting to point certbot to an ACME Directory
Resource URI other than Let's Encrypt production/staging one.
In the meantime, we are deprecating the now useless Let's Encrypt
production flag.
- spawn the geoclue-agent directly instead of running it via bash
- document why we cannot use DynamicUser = true
- have systemd create the home directory instead of using an explicit
tmpfiles.d fragment
* lm_sensors: add fancontrol module + nixos test
fancontrol is a small script that checks temperature sensors and adapts
fan speeds accordingly. It reads a text config file that can be
auto-generated by running the pwmconfig wizard on the live system.
Both options were introduced in systemd v243[1]. Those options can be
used to ensure that LinkLocalAddressing is only configured for a given
interface if DHCPv4 fails. To quote `systemd.network(5)`:
```
If "fallback" or "ipv4-fallback" is specified, then an IPv4
link-local address is configured only when DHCPv4 fails. If "fallback", an IPv6 link-local
address is always configured, and if "ipv4-fallback", the address is not configured. Note
that, the fallback mechanism works only when DHCPv4 client is enabled, that is, it requires
"DHCP=yes" or "DHCP=ipv4".
```
[1] 8bc17bb3f7
Default behavior is to continue executing the script even when one or
multiple steps fail. We want to abort early if any part of the
initialization fails to not run with a partially initialized state.
Default behavior also allows dereferencing non-existent variables,
potentially resulting in hard-to-find bugs.
Previously setting `allowKeysForGroup = true; group = "foo"` would not
apply the group permission change of the certificates until the service
gets restarted. This commit fixes this by making systemd restart the
service every time it changes.
Note that applying this commit to a system with an already running acme
systemd service doesn't fix this immediately and you still need to wait
for the next refresh (or call `systemctl restart acme-<domain>`). Once
everybody's service has restarted once this should be a problem of the
past.
While switching NixOS configurations with both
networking.useNetworkd = true;
virtualisation.virtualbox.host.enable;
You often end up waiting for systemd-networkd-wait-online.service.
This happens because the vboxnet0 device doesn't have a carrier until
virtualbox machines are started, so networkd gets stuck in
"Configuring":
⇒ networkctl list
IDX LINK TYPE OPERATIONAL SETUP
1 lo loopback carrier unmanaged
2 wlp2s0 wlan routable unmanaged
3 vboxnet0 ether no-carrier configuring
This updates the NixOS virtualbox host module to include a
RequiredForOnline=no statement in the generated 40-vboxnet0.network
file, so networkd doesn't consider it necessary for
systemd-networkd-wait-online.service to finish.
Let's encrypt bumped ACME to V2. We need to update our nixos test to
be compatible with this new protocol version.
We decided to drop the Boulder ACME server in favor of the more
integration test friendly Pebble.
- overriding cacert not necessary
- this avoids rebuilding lots of packages needlessly
- nixos/tests/acme: use pebble's ca for client tests
- pebble always generates its own ca which has to be fetched
TODO: write proper commit msg :)
From https://github.com/zsh-users/zsh-syntax-highlighting#faq:
"It must be sourced after all custom widgets have been created
(i.e., after all zle -N calls and after running compinit)."
zsh-syntax-highlighting must be sourced to the end.
Updating:
- nixos module to use the new `account_reg.json` file.
- use nixpkgs pebble for integration tests.
Co-authored-by: Florian Klink <flokli@flokli.de>
Replace certbot-embedded pebble
Just maching all network interfaces caused many breakages, see #18962
and #71106.
We already don't support the global networking.useDHCP,
networking.defaultGateway(6) options if networking.useNetworkd is
enabled, but direct users to configure the per-device
networking.interfaces.<name?>.… options.
This adds support for deploying to remote hosts without being root:
sudo nixos-rebuild --target-host non-root@host
Without this change, only root@host is able to deploy.
The idea is that if the local command is run with sudo, so should the
remote one, thus there is no need for adding any CLI options.
Slim is abandoned and won't work with wayland.
It's in our best interest to use the display-manager
that makes most sense for Plasma5, sddm.
We've already moved on from it being default in #30890
and the graphical.nix profile, which the virtualbox profile uses,
has sddm anyway.
This option was removed because allowing (multiple) regular users to
override host entries affecting the whole system opens up a huge attack
vector. There seem to be very rare cases where this might be useful.
Consider setting system-wide host entries using networking.hosts,
provide them via the DNS server in your network, or use
networking.networkmanager.appendNameservers to point your system to
another (local) nameserver to set those entries.
This reverts commit 60aedadc59.
Using tests from #71212 I am now unable to reproduce there being issues
with starting the default metacity flashback session without this.
On start, unicorn, sidekiq and other parts running ruby code emits
quite a few warnings similar to
/var/gitlab/state/config/application.rb:202: warning: already initialized constant Gitlab::Application::LOOSE_EE_APP_ASSETS
/nix/store/ysb0lgbzxp7a9y4yl8d4f9wrrzy9kafc-gitlab-ee-12.3.5/share/gitlab/config/application.rb:202: warning: previous definition of LOOSE_EE_APP_ASSETS was here
/var/gitlab/state/lib/gitlab.rb:38: warning: already initialized constant Gitlab::COM_URL
/nix/store/ysb0lgbzxp7a9y4yl8d4f9wrrzy9kafc-gitlab-ee-12.3.5/share/gitlab/lib/gitlab.rb:38: warning: previous definition of COM_URL was here
This seems to be caused by the same ruby files being evaluated
multiple times due to the paths being different - sometimes they're
loaded using the direct path and sometimes through a symlink, due to
our split between config and package data. To fix this, we make sure
that the offending files in the state directory always reference the
store path, regardless of that being the real file or a symlink.
We create a wrapper which launches gnome-shell with the correct environment and
cap_sys_nice.
We can then override gnome-shell-wayland.service to use this wrapper.
NOTE: We need to force clear the environment, because the defaults aren't good
for user services. That should probably be fixed.
Otherwise connecting simply fails:
VPN connection: failed to connect: 'La création du fichier « /tmp/lib/NetworkManager-fortisslvpn/0507e3ef-f0e0-4153-af64-b3d9a025877c.config.XSB19Z » a échoué : No such file or directory'
This reverts commit 2ee14c34ed.
This caused the initializers directory to be cleaned out while gitlab
was running in some instances. We clean out the directory on the
preStart stage already, so ensuring existance and permissions should
suffice.
This fixes an issue with a recent addition of a config file
check in c28ded36ef.
Previously it was possible to supply a path as a string
to `configFile`. Now it will fail checking the config file
during evaluation of the module due to sandboxing.
A toggle to disable the check, more informative log messages
and handling for various configFile values are added.
This solves the dependency cycle in gcr alternatively so there won't be
two gnupg store paths in a standard NixOS system which has udisks2 enabled
by default.
NixOS users are expected to use the gpg-agent user service to pull in the
appropriate pinentry flavour or install it on their systemPackages and set
it in their local gnupg agent config instead.
Co-authored-by: Florian Klink <flokli@flokli.de>
This solves the dependency cycle in gcr alternatively so there won't be
two gnupg store paths in a standard NixOS system which has udisks2 enabled
by default.
NixOS users are expected to use the gpg-agent user service to pull in the
appropriate pinentry flavour or install it on their systemPackages and set
it in their local gnupg agent config instead.
Co-authored-by: Florian Klink <flokli@flokli.de>
This session would fail to start because we didn't have it in systemd.packages
(as we've switched to systemd gnome-session).
Haven't tested custom sessions.
This fixes user environment setup for sessions which doesn't successfully go
through a shell init.
Note we don't go through `sessionVariables` as we want the wrappers to have
highest priority. It would also cause wrapperDir to occur twice when in shell
sessions, as shells use `sessionVariables` too while prepending wrapperDir in a
custom snippet.
In particular logging in and out of gnome-shell could result in a broken path
without this fix.
Bumps `matrix-synapse` to version 1.4.0[1]. With this version the
following changes in the matrix-synapse module were needed:
* Removed `trusted_third_party_id_servers`: option is marked as deprecated
and ignored by matrix-synapse[2].
* Added `account_threepid_delegates` options as replacement for 3rdparty
server features[3].
* Added `redaction_retention_period` option to configure how long
redacted options should be kept in the database.
* Added `ma27` as maintainer for `matrix-synapse`.
Co-Authored-By: Notkea <pacien@users.noreply.github.com>
Co-authored-by: Maximilian Bosch <maximilian@mbosch.me>
[1] https://matrix.org/blog/2019/10/03/synapse-1-4-0-released
[2] https://github.com/matrix-org/synapse/pull/5875
[3] https://github.com/matrix-org/synapse/pull/5876
If you want to be able to use OpenSC with ssh-agent, you need to be able
to add it to the ssh-agent whitelist. This adds an option,
agentPKCS11Whitelist, that exposes the option.
Note that I currently work around this by injecting the parameter into
the agentTimeout option:
programs.ssh.agentTimeout = "1h -P ${pkgs.opensc}/lib/opensc-pkcs11.so";
but I feel that a proper option would be better :)
This fixes a regression from bb649d96b0.
There were permission problems, when the preStart script tried to copy
the smokeping.fcgi file over the old file.
When having backup jobs that persist to a removable device like an
external HDD, the directory shouldn't be created by an activation script
as this might confuse auto-mounting tools such as udiskie(8).
In this case the job will simply fail, with the former approach
udiskie ran into some issues as the path `/run/media/ma27/backup` was
already there and owned by root.
GDM now specifies ordering between `plymouth-quit` and `display-manager`:
9be5321097
This causes an ordering cycle between GDM and plymouth-quit which can result in
systemd breaking GDM:
```
plymouth-quit.service: Job display-manager.service/start deleted to break
ordering cycle starting with plymouth-quit.service/start
```
Not sure how often this triggers, as I've run my system with plymouth and
9be5321097 without any issues. But I did catch a VM doing this.
NOTE: I also tried to remove the ordering in GDM to see if plymouth managed to
live longer, but it didn't seem to help. So I opted to stick as close to
upstream (upstream GDM specifies ordering, but plymouth does not).
This enlarges the system uid/gid range 6-fold, from 100 to 600 ids. This
is a preventative measure against running out of dynamically allocated
ids for NixOS services with isSystemUser, which should become the
preferred way of allocating uids for non-real users.
We had these set so gtk2 can discover themes properly, however we failed
realize that gtk2 already has a patch that makes it search in XDG_DATA_DIRS.
I don't believe any issue is solved by setting these.
This option was added by mistake since `listenAddress` exists by default
for each prometheus-exporter. Using
`services.prometheus.exporters.wireguard.addr` will now cause a warning,
but doesn't break eval.
Having `display-manager` conflict with `plymouth-quit` causes this lock up:
- `plymouth-quit-wait` starts up, waiting for plymouth-quit to run
- `lightdm` starts up
- `plymouth-quit` can't start, it conflicts with lightdm
- `plymouth-quit-wait` keeps waiting on plymouth-quit to kill plymouthd
The idea is having LightDM control when plymouth quits, but communication with
plymouth was broken: https://github.com/NixOS/nixpkgs/pull/71064
Unfortunately having the conflict breaks switching to configurations with
plymouth enabled. So we still need to remove the conflict.
fixes #71034
The rationale for this is that old filesystems have recieved little scrutiny
wrt. security relevant bugs.
Lifted from OpenSUSE[1].
[1]: 8cb42fb665
Co-Authored-By: Renaud <c0bw3b@users.noreply.github.com>
In fact, don't create them at all because Nix does that automatically.
Also remove modules/programs/shell.nix because everything it did is
now done automatically by Nix.
gitlab:db:configure prints the root user's password to stdout on
successful setup, which means it will be logged to the
journal. Silence this informational output. Errors are printed to
stderr and will thus still be let through.
The mime type definitions included with nginx are very incomplete, so
we use a list of mime types from the mailcap package, which is also
used by most other Linux distributions by default.
I have `users.defaultUserShell = pkgs.fish;` set on my server and when I ran `nixos-rebuild switch --target-host …`, the command failed with the following error:
fish: Unsupported use of '='. To run 'nix-store' with a modified environment, please use 'env PATH=… nix-store…'
That is because fish requires env to set environment variables for a program. It should also work on other shells.
xfce4-volumed-pulse is not abandoned, but is superseded by a panel
plugin which is not available when not using the desktop.
Fixes: volume up/down keys support
These improvements come from shopping around
at what other downstreams have done with their
systemd units and recent changes like [0] to gdm.
Note there's no requries or after on dbus.socket because
settings BusName will set this up automaticallly and
give it a type of dbus.
[0]: 2d57f45962
uinput needs to be added to boot.kernelModules in order for the udev
rules defined by steam to be run and set permissions correctly on
/dev/uinput.
See https://github.com/NixOS/nixpkgs/issues/70471.
List all modules that *may* be required depending on individual container
configurations; don't expect that further modules can be loaded after boot.
Fixes https://github.com/NixOS/nixpkgs/issues/38676
