Fixes:
```
activating the configuration...
warning: user ‘systemd-coredump’ has unknown group ‘systemd-coredump’
setting up /etc...
```
Oversight of #133166
Other services that depend on elasticsearch should be started after
it, but since the versions we're packaging have to run as
"Type=simple", they're started as soon as the elasticsearch binary has
been executed, likely winning the race against it.
This makes sure elasticsearch is up and running, responding to a
simple query, before dependents are started.
When cross-compiling, we can't run the runtime shell to check syntax
if it's e.g. for a different architecture. We have two options here.
We can disable syntax checking when cross compiling, but that risks
letting errors through. Or, we can do what I've done here, and change
the syntax check to use stdenv's shell instead of the runtime shell.
This requires the stdenv shell and runtime shell to be broadly
compatible, but I think that's so ingrained in Nixpkgs anyway that
it's fine. And this way we avoid conditionals that check for cross.
Add a shell script that checks if the paths of all wrapped programs
actually exist to catch mistakes. This only checks for Nix store paths,
which are always expected to exist at build time.
This updates systemd to version v249.4 from version v247.6.
Besides the many new features that can be found in the upstream
repository they also introduced a bunch of cleanup which ended up
requiring a few more patches on our side.
a) 0022-core-Handle-lookup-paths-being-symlinks.patch:
The way symlinked units were handled was changed in such that the last
name of a unit file within one of the unit directories
(/run/systemd/system, /etc/systemd/system, ...) is used as the name
for the unit. Unfortunately that code didn't take into account that
the unit directories themselves could already be symlinks and thus
caused all our units to be recognized slightly different.
There is an upstream PR for this new patch:
https://github.com/systemd/systemd/pull/20479
b) The way the APIVFS is setup has been changed in such a way that we
now always have /run. This required a few changes to the
confinement tests which did assert that they didn't exist. Instead of
adding another patch we can just adopt the upstream behavior. An
empty /run doesn't seem harmful.
As part of this work I refactored the confinement test just a little
bit to allow better debugging of test failures. Previously it would
just fail at some point and it wasn't obvious which of the many
commands failed or what the unexpected string was. This should now be
more obvious.
c) Again related to the confinement tests the way a file was tested for
being accessible was optimized. Previously systemd would in some
situations open a file twice during that check. This was reduced to
one operation but required the procfs to be mounted in a units
namespace.
An upstream bug was filed and fixed. We are now carrying the
essential patch to fix that issue until it is backported to a new
release (likely only version 250). The good part about this story is
that upstream systemd now has a test case that looks very similar to
one of our confinement tests. Hopefully that will lead to less
friction in the long run.
https://github.com/systemd/systemd/issues/20514https://github.com/systemd/systemd/pull/20515
d) Previously we could grep for dlopen( somewhat reliably but now
upstream started using a wrapper around dlopen that is most of the
time used with linebreaks. This makes using grep not ergonomic
anymore.
With this bump we are grepping for anything that looks like a
dynamic library name (in contrast to a dlopen(3) call) and replace
those instead. That seems more robust. Time will tell if this holds.
I tried using coccinelle to patch all those call sites using its
tooling but unfornately it does stumble upon the _cleanup_
annotations that are very common in the systemd code.
e) We now have some machinery for libbpf support in our systemd build.
That being said it doesn't actually work as generating some skeletons
doesn't work just yet. It fails with the below error message and is
disabled by default (in both minimal and the regular build).
> FAILED: src/core/bpf/socket_bind/socket-bind.skel.h
> /build/source/tools/build-bpf-skel.py --clang_exec /nix/store/x1bi2mkapk1m0zq2g02nr018qyjkdn7a-clang-wrapper-12.0.1/bin/clang --llvm_strip_exec /nix/store/zm0kqan9qc77x219yihmmisi9g3sg8ns-llvm-12.0.1/bin/llvm-strip --bpftool_exec /nix/store/l6dg8jlbh8qnqa58mshh3d8r6999dk0p-bpftools-5.13.11/bin/bpftool --arch x86_64 ../src/core/bpf/socket_bind/socket-bind.bpf.c src/core/bpf/socket_bind/socket-bind.skel.h
> libbpf: elf: socket_bind_bpf is not a valid eBPF object file
> Error: failed to open BPF object file: BPF object format invalid
> Traceback (most recent call last):
> File "/build/source/tools/build-bpf-skel.py", line 128, in <module>
> bpf_build(args)
> File "/build/source/tools/build-bpf-skel.py", line 92, in bpf_build
> gen_bpf_skeleton(bpftool_exec=args.bpftool_exec,
> File "/build/source/tools/build-bpf-skel.py", line 63, in gen_bpf_skeleton
> skel = subprocess.check_output(bpftool_args, universal_newlines=True)
> File "/nix/store/81lwy2hfqj4c1943b1x8a0qsivjhdhw9-python3-3.9.6/lib/python3.9/subprocess.py", line 424, in check_output
> return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
> File "/nix/store/81lwy2hfqj4c1943b1x8a0qsivjhdhw9-python3-3.9.6/lib/python3.9/subprocess.py", line 528, in run
> raise CalledProcessError(retcode, process.args,
> subprocess.CalledProcessError: Command '['/nix/store/l6dg8jlbh8qnqa58mshh3d8r6999dk0p-bpftools-5.13.11/bin/bpftool', 'g', 's', '../src/core/bpf/socket_bind/socket-bind.bpf.o']' returned non-zero exit status 255.
> [102/1457] Compiling C object src/journal/libjournal-core.a.p/journald-server.c.oapture output)put)ut)
> ninja: build stopped: subcommand failed.
f) We do now have support for TPM2 based disk encryption in our
systemd build. The actual bits and pieces to make use of that are
missing but there are various ongoing efforts in that direction.
There is also the story about systemd in our initrd to enable this
being used for root volumes. None of this will yet work out of the
box but we can start improving on that front.
g) FIDO2 support was added systemd and consequently we can now use
that. Just with TPM2 there hasn't been any integration work with
NixOS and instead this just adds that capability to work on that.
Co-Authored-By: Jörg Thalheim <joerg@thalheim.io>
To keep backward compatibility and have a typing would require making
all options null by default, adding a defaultText containing the actual
value, write the default value logic based on `!= null` and replacing
the nulls laters. This pretty much defeats the point of having used
a submodule type.
The security.wrappers option is morally a set of submodules but it's
actually (un)typed as a generic attribute set. This is bad for several
reasons:
1. Some of the "submodule" option are not document;
2. the default values are not documented and are chosen based on
somewhat bizarre rules (issue #23217);
3. It's not possible to override an existing wrapper due to the
dumb types.attrs.merge strategy;
4. It's easy to make mistakes that will go unnoticed, which is
really bad given the sensitivity of this module (issue #47839).
This makes the option a proper set of submodule and add strict types and
descriptions to every sub-option. Considering it's not yet clear if the
way the default values are picked is intended, this reproduces the current
behavior, but it's now documented explicitly.
I noticed this minor grammar mistake when running update.nix, and then
while grepping to find the source I noticed we had it a few times in
Nixpkgs. Just as easy to fix treewide as it was to fix the one
occurrence I noticed.
The primary use case is tools like sops-nix and agenix to restart units
when secrets change. There's probably other reasons to restart units as
well and a nice thing to have in general.
Allows advanced users to select what packages they want to generate the
man cache for, and even more advanced users to make manualPages
content-addressed to avoid needless rebuilds.
Adds the ability to provide the --write flag in addition to the --serve flag via
a new option, services.sshServe.write.
A user can now share their system as a remote builder with friends easily as
follows:
{
nix = {
sshServe = {
enable = true;
write = true;
keys = ["ssh-dss AAAAB3NzaC1k... alice@example.org"];
};
};
}
Co-authored-by: Raphael Megzari <raphael@megzari.com>
Conflicts:
- pkgs/development/python-modules/pathspec/default.nix
The hashes are equivalent, so it's not a real conflict.
- pkgs/top-level/static.nix
I can't see a solution, deffered redoing this to the later PR:
https://github.com/NixOS/nixpkgs/pull/136849
Matrix homeservers have two important domains. The user-visible server_name and the homeserver domain which serves most of the traffic but is really seen by users. The docs around this variable said "This is used by remote servers to connect to this server" which is very confusing because most of the remote server traffic actually goes the server domain, not the server_name domain. (The server_name domain is only used to fetch the .well-known file that points at the server domain).
I largely copied the wording from https://matrix-org.github.io/synapse/latest/usage/configuration/homeserver_sample_config.html as I found it much more clear.
The treatment of the "source" parameter changed
with eb7120dc79, breaking stuff.
Before that commit, the source parameter was converted to a
string by implicit coercion, which would copy the file to the
store and yield an string containing the store path. Now, by
the virtue of escapeShellArg, toString is called explicitly on
that path, which will yield an string containing the absolute
path of the file.
This commit restores the old behavior.
Dash `echo` interprets backslash escapes. This causes two consecutive backslashes in JSON to turn into a single one before the string is passed to jq, resulting in a parsing error.
This is useful for situations in which you might want to reset certain
things using `--reset-database` or `--reset-deltas` or debug certain
things using any of the debug options like `--debug-perf-stats`.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Qt links against GTK to be able to use native GTK file chooser
in GTK-oriented DEs. However, GTK expects a specific environment,
which means the application needs to be wrapped to prevent crashes
when file chooser is opened in some environments.
This patch bypasses the need for wrapping Qt applications with GTK-related
environment since the file chooser dialogue will now come from a separate
process (instantiated by the XDG desktop portal via D-Bus).
In the future, we could remove the GTK dependency from Qt to fix the crashes
on non-{GNOME,Pantheon} environments. Then, users would be able to choose
between non-native Qt dialogue or native one facilitated by XDG portals
(e.g. through setting `QT_QPA_PLATFORMTHEME` to either `qgnomeplatform`,
or `xdgdesktopportal`).
One disadvantage is adding a Qt dependency to GNOME, even for people
who might not use any Qt apps. But they can easily just add `qt5.enable = false;`
to their NixOS configuration.
The configuration is also presumably less battle tested than plain Qt
with its first-party GTK integration. But it is backed by Fedora
and used by Manjaro GNOME so it cannot be that bad.
Lastly, I worry about ABI compatibility of the platform modules
with apps installed from different Nixpkgs revision.
* nixos/airsonic: make path to war file and jre configurable
* Apply suggestions from code review
Co-authored-by: Sumner Evans <me@sumnerevans.com>
Co-authored-by: Sumner Evans <me@sumnerevans.com>
This error occurs if `nextcloud-occ maintenance:install` fails and the
`upgrade` command is attempted to be executed afterwards.
Due to the nature of the installer we can't do much about it, so I guess
it makes sense to add some notes about it. The other notes in the
`Pitfalls`-section are semantically a list of different topics, so I
changed that accordingly now.
Closes #111175
This doesn't work anymore and thus breaks the installation leaving a
broken `/var/lib/nextcloud`.
It isn't a big deal since we set this value in the override config
before, so the correct table-prefix is still used. In order to confirm
that, I decided to add a custom prefix to the basic test.
Introduce an AWS EC2 AMI which supports aarch64 and x86_64 with a ZFS
root.
This uses `make-zfs-image` which implies two EBS volumes are needed
inside EC2, one for boot, one for root. It should not matter which
is identified `xvda` and which is `xvdb`, though I have always
uploaded `boot` as `xvda`.
Tor attempts to detect what external IP address a machine is using by
listing addresses on all network interfaces on the system. This listing
is done using getifaddrs(3), which relies on netlink in order to get
IPv6 address information.
This change fixes Tor not finding the relay's IPv6 address unless
explicitly configured via either an ORPort directive or via DNS
resolution of the machine hostname.
This addresses #120263 in part, by allowing users to override the
github-runner derivation that is bound to turn non-functional via the
self-update mechanism. (And it'll allow using a buildFHSUserEnv-based
derivation, if someone ends up building that!)
Printers are usually connected over USB to serial interfaces that are
mounted as tty character devices owned by the dialout group. Add our
octoprint service to this group at runtime to allow access to these
printers.
5.7+ comes with a native exfat implementation, exfatprogs should be used instead.
The exfat package puts a "mount.exfat" binary in the path, which causes
mount to prefer the FUSE version to the non-fuse one. There's no way to
disable the binary, so switch to exfatprogs.
Recommend to use services.xserver.dpi option instead. Mention in the
documentation that it's a sledgehammer approach and monitor settings should be
used instead.
Also don't set DPI in fontconfig settings; fontconfig should use Xft settings
by default so let's not override one value in multiple places. For example,
user now can set DPI via ~/.Xresources properly.
This should barely increase the size of the initrd, because these are all symlinks.
With this, systems with dm-cache/lvmcache can also be booted, although the kernel modules for the relevant dm targets still need to be added to the initrd with boot.initrd.kernelModules.
Deluge 1.x requires Python 2 which upstream has end-of-lifed. Deluge depends
on pythonPackages.twisted, Python 2 support for which upstream has
nowdropped. If pythonPackages.twisted is upgraded then Deluge 1.x breaks.
So, remove it instead of leaving it broken.
Deluge 2.x (deluge-2_x) is available and continues to work.
