Previously this defaulted to the default MOTD in the solanum source
tree, and I don't want my friends to laugh at me. Includes a patch to
the tests to ensure that the MOTD is actually set.
This replicates the fix done in #109705 (solanum is a fork of charybdis,
so they share fundamental logic for this).
Signed-off-by: Christine Dodrill <me@christine.website>
Assert that the PostgreSQL version being deployed is the one used
upstream. Allow the user to override this assertion, since it's not
always possible or preferable to use the recommended one.
Since the update to wlroots 0.13 (e03dde82a7) the default VGA card
isn't supported anymore and we needed to switch to virtio (qxl didn't
work either). However, as it turned out "-vga virtio" (28b8cff301)
broke the test on AArch64. Luckily there's a third option that works on
all three supported platforms: virtio-gpu-pci
According to [0] "This device lacks VGA compatibility mode but is
otherwise identical to the virtio vga device. UEFI firmware can handle
this, and if your guests has drivers too you can use this instead of
virtio-vga. This will reduce the attack surface (no complex VGA
emulation support) and reduce the memory footprint by 8 MB (no pci
memory bar for VGA compatibility). This device can be placed in a PCI
Express slot."
So in the end this seems like the ideal choice :)
See also [1].
[0]: https://www.kraxel.org/blog/2019/09/display-devices-in-qemu/#virtio-gpu-pci
[1]: https://patches.openembedded.org/patch/164351/
The tests timeout on AArch64 (e.g. [0] and [1]), likely because the QEMU
option "-vga virtio" isn't supported there (unfortunately I currently
lack access to an AArch64 system with NixOS to investigate).
This also affects the test for Cage but that one is already limited to
x86_64-linux.
[0]: https://hydra.nixos.org/build/144148809
[1]: https://hydra.nixos.org/build/144103034
Adds includeStorePaths, allowing the omission of the store paths.
You generally want to leave it on, but tooling may disable this
to insert the store paths more efficiently via other means, such
as bind mounting the host store.
Starting Cagebreak as X11 client doesn't work anymore as wlroots 0.13
started to require the DRI3 extension which isn't supported by LLVMpipe:
machine # [ 13.508284] xsession[938]: 00:00:00.003 [ERROR] [backend/x11/backend.c:433] X11 does not support DRI3 extension
machine # [ 13.666989] show_signal_msg: 62 callbacks suppressed
machine # [ 13.666993] .cagebreak-wrap[938]: segfault at 8 ip 0000000000408574 sp 00007ffef76f2440 error 4 in .cagebreak-wrapped[407000+d000]
machine # [ 13.670483] Code: f4 ff ff 4c 8b 84 24 70 01 00 00 8d 45 01 48 89 c5 49 8b 3c c0 48 85 ff 75 e4 4c 89 c7 e8 84 f4 ff ff 48 8b bc 24 18 01 00 00 <48> 8b 47 08 4c 8d 6f d8 48 8d 68 d8 48 39 df 75 0e eb 36 66 0f 1f
machine # [ 13.518274] xsession[938]: 00:00:00.006 [ERROR] [../cagebreak.c:313] Unable to create the wlroots backend
The test broke after updating Cagebreak in #121652 (bf8679ba94).
XWayland still fails for unknown reasons:
Modifiers specified, but DRI is too old
libEGL warning: DRI2: failed to create dri screen
libEGL warning: NEEDS EXTENSION: falling back to kms_swrast
glamor: No eglstream capable devices found
glamor: 'wl_drm' not supported
Missing Wayland requirements for glamor GBM backend
Missing Wayland requirements for glamor EGLStream backend
Failed to initialize glamor, falling back to sw
00:00:03.534 [ERROR] [xwayland/server.c:252] waitpid for Xwayland fork
failed: No child processes
(EE) failed to write to XWayland fd: Broken pipe
/nix/store/kcm3x8695fgycf31grzl9fy5gggwpram-xterm-367/bin/xterm: Xt
error: Can't open display: :0
The fallback to software rendering is to be expected but it looks like
XWayland is crashing with "failed to write to XWayland fd: Broken pipe".
While looking at the sphinx package I noticed it was heavily
undermaintained, which is when we noticed nand0p has been inactive for
roughly 18 months. It is therefore prudent to assume they will not be
maintaining their packages, modules and tests.
- Their last contribution to nixpkgs was in 2019/12
- On 2021/05/08 I wrote them an email to the address listed in the
maintainer-list, which they didn't reply to.
- use "with subtest" everywhere
- do more in nix and less in python
- use makeTest directly to define multiple tests instead of one with
multiple nodes -> this enables them to run in parallel
- Thunderbird 68 has been dropped on master.
- gccCrossLibcStdenv has been factored out on staging-next in all-packages.nix, while the file has been re-formatted on master.
As per #121293, I ensured the UMask is set correctly
and removed any unnecessary chmod/chown/chgrp commands.
The test suite already partially covered permissions
checking but I added an extra check for the selfsigned
cert permissions.
AFAIK this is the only reliable way for us to ensure SQLCipher will be
loaded instead of SQLite. It feels like a hack/workaround but according
to the SQLCipher developers [0] "this issue can and should be handled
downstream at the application level: 1. While it may feel like a
workaround, using LD_PRELOAD is a legitimate approach here because it
will substitute the system SQLite with SQLCipher which is the intended
usage model;".
This fixes #108772 for NixOS 20.09 users who upgrade to NixOS 21.05 and
replaces #117555.
For nixos-unstable users this will unfortunately break everything again
so we should add a script to ease the transition (in a separate commit
so that we can revert it for NixOS 21.05).
[0]: https://github.com/sqlcipher/sqlcipher/issues/385#issuecomment-802874340
Well, this should test if the database is encrypted but currently it is
still unencrypted and we need to notice if this behaviour changes in the
future (as it will cause data loss, see e.g. #108772).
Anyway, this doesn't really matter for security reasons but we need this
test to prevent data loss (unfortunately Signal-Desktop and SQLCipher
handle this badly... :o).
This test is important to confirm that $WAYLAND_DISPLAY is correctly
imported via "dbus-update-activation-environment --systemd" which is
done by default since #122605 (00e8e5b123).
It ensures that the gnome3-pinentry pop-ups work as expected to avoid
regressions like #119445 (which also broke screen sharing).
config.boot.kernelPackages.wireguard evaluates to null on machine
closure having a > 5.6 Linux kernels, hence making the evaluation of
this test fail.
Wireguard is now part of the mainline Linux kernel, we do not need to
to add it via a additional kernel module anymore for this test.
Annoyed with the interference of the python formatting of
generated code (see #72964), I took matters into my own hands
as maintainer of dockerTools.
Afterwards, I've created a PR, hoping to unstuck the discussion.
@aszlig took notice and thanks to his python ecosystem knowledge,
the testing efforts of @blaggacao and @Ma27, and a sense of
shared suffering and comraderie we were able to change the
situation for the better in #122201.
Now, we have a proper linter that actually helps contributors,
so it's time to turn it back on again.
I'm glad we could make it happen this quickly!
Thanks!
This reverts commit 4035049af3.
There were a bunch of unnecessary f-strings in there and I also removed
the "# fmt: on/off" comments, because we no longer use Black and thus
won't need those comments anymore.
Signed-off-by: aszlig <aszlig@nix.build>
The new linter basically does
def testScript
# ...
before calling `pyflakes`. As this test-script is empty, it would lead
to a syntax-error unless `pass` is added.
(It was requested by them.)
I left one case due to fetching from their personal repo:
pkgs/desktops/pantheon/desktop/extra-elementary-contracts/default.nix
This adds a basic test for Sway. Because Sway is an important part of
the Wayland ecosystem, is stable, and has few dependencies this test
should also be suitable for testing core packages it depends on (e.g.
wayland, wayland-protocols, wlroots, xwayland, mesa, libglvnd, libdrm,
and soon libseat).
The test is modeled after the suggested way of using Sway, i.e. logging
in via a virtual console (tty1) and copying the configuration from
/etc/sway/config (we replace Mod4 (the GNU/Tux key - you've replaced
that evil logo, right? :D) with Mod1 (Alt key) because QEMU monitor's
sendkey command doesn't support the former).
The shell aliases are used to make the sendkey log output shorter.
Co-authored-by: Patrick Hilhorst <git@hilhorst.be>
The radicale version is no longer chosen automatically based on
system.stateVersion because that gave the impression that old versions
are still supported.
Follow RFC 42 by having a settings option that is
then converted into an unbound configuration file
instead of having an extraConfig option.
Existing options have been renamed or kept if
possible.
An enableRemoteAccess has been added. It sets remote-control setting to
true in unbound.conf which in turn enables the new wrapping of
unbound-control to access the server locally. Also includes options
'remoteAccessInterfaces' and 'remoteAccessPort' for remote access.
Signed-off-by: Marc 'risson' Schmitt <marc.schmitt@risson.space>
This is a patch I filed against upstream[1] a while ago. As it isn't
merged yet and fixes configurations with all stats enabled in knot
(otherwise it'd crash when sending a request to `localhost:9433`), I
decided that it makes sense to add it to the package directly.
I extended the test to make sure that it only passes with this patch.
[1] https://github.com/ghedo/knot_exporter/pull/6
Currently, the installer tests just hang after the initial install phase
on i686 because qemu just quits because of the gic parameter.
Fix this by doing x86 things for both x86-64 and i686.
Configures the emulated_hue component and expects CAP_NET_BIND_SERVICE
to be passed in order to be able to bind to 80/tcp.
Also print the systemd security analysis, so we can spot changes more
quickly.
git-daemon won't start up if its project directory (here /git) doesn't
exist. If we try to create it using the test harness, then we're racing
whether we manage to connect to the backdoor vs. the startup speed of
git-daemon.
Instead, use systemd-tmpfiles, which is guaranteed(?) to run before
network.target and thus before git-daemon.service starts.
rspamd seems to be consuming more memory now sometimes, causing OOMs in
the test.
Increase the memory given to these VMs to make the tests pass more
reliably.
This test was failing because Firefox was displaying a download prompt
rather than the page content, presumably because mumble mumble
content-type sniffing.
By explicitly setting a content-type, the test now passes.
See [0]: "QEMU_OPTS is something that should be set by people running VM
tests interactively, to do port forwardings etc.
We really should not poke with it from the test script - that's what
virtualisation.qemu.options is for."
[0]: https://github.com/NixOS/nixpkgs/pull/119615#discussion_r624145020
Co-authored-by: Florian Klink <flokli@flokli.de>
It can still network, it can only access the ssl related files if ssl is
enabled.
✗ PrivateNetwork= Service has access to the host's network 0.5
✗ RestrictAddressFamilies=~AF_(INET|INET6) Service may allocate Internet sockets 0.3
✗ DeviceAllow= Service has a device ACL with some special devices 0.1
✗ IPAddressDeny= Service does not define an IP address allow list 0.2
✗ RootDirectory=/RootImage= Service runs within the host's root directory 0.1
✗ RestrictAddressFamilies=~AF_UNIX Service may allocate local sockets 0.1
→ Overall exposure level for mosquitto.service: 1.1 OK 🙂
See #119615 for more details. The aarch64-linux test failed with
"qemu-system-aarch64: Virtio VGA not available" so I've restricted the
test to x86_64-linux (the virtio paravirtualized 3D graphics driver is
likely only available on very few platforms).
The result still looks far from ideal but at least it gets recognized
now. "-fa Monospace" is required to switch to a font from the FreeType
library so that "-fs 24" works.
Note: Using linuxPackages_latest is not required anymore.
This reverts commit d6e0d38b84.
We need shorter secrets to continue working, since the earlier
recommendation was too short and there's no way to rotate the them.
Rather than relying on carefully avoiding touching the 9P-mounted
/nix/store, we instead install a small NixOS system, similar to
the installer tests, and boot from that.
This avoids the various pitfalls associated with trying to unsuspend
properly and trades off a bunch of boilerplate for what will hopefully
be a more reliable test.
Additionally, this test now actually tests booting the system using a
bootloader, rather than the previous method of just booting the kernel
directly.
Upstream repositories do no longer exists. There has been no release in
a while. - Not a good combination for a network daemon running as root
in C that parses network packets...
aa22be179a dropped the backend setting
which was used in the test, breaking evaluation of the test in the
process. Kind of defeats the purpose of a test if it isn't executed
before merging a change to a module…
As the only consequence of isSystemUser is that if the uid is null then
it's allocated below 500, if a user has uid = something below 500 then
we don't require isSystemUser to be set.
Motivation: https://github.com/NixOS/nixpkgs/issues/112647
Pass the args from kernel-generic.nix's top-level to the individual
tests. Makes `nix-build -A nixosTests.kernel-generic.<attr>` and
`nix-build nixos/tests/kernel-generic.nix -A <attr>` work as expected.
* Move `hostname` and `root` into a settings submodule with a freeform
type, allowing users to also use options not known to the NixOS
service. Compatibility with a warning for the renamed options is also
trivial to achieve.
* `port` stays where it is as we don't actually use the `port` option of
spacecookie to set up the socket, but only to inform spacecookie about
the port we have set in the `systemd.socket` file, this makes more
sense. Additionally the configuration of the listening port and
address change in the next spacecookie release — we can dodge this
issue altogether by doing our own thing, but I'm interested to hear
opinions on this.
To ensure that this is not misconfigured, we add an assertion for
the port option.
* Add an assertion for `user` in settings which has no effect the way
we are starting spacecookie as it wouldn't be able to call setuid.
The message also explains how a specific user can be used with
spacecookie if desired.
* Use proper gopher urls
* The client vms name is also controlled in a single place now
* fileContent holds the precise file content now
* wait for the spacecookie unit instead of the port
* avoids sending an empty request
* since spacecookie is a notify service it only is fully started when
the socket has been set up.
Test the automatic backup and restore functionality by backing up the
instance after running the initial tests, stopping GitLab and removing
all state, running the restore rake task, then running the tests
again, but without pushing data.
This allows for shared hledger installations, where the web interface is
available via network and multiple user share a SSH access to the
hledger user.
Also added `--serve` to the CLI options, as hledger-web tries to open a
webbrowser otherwise:
hledger-web: xdg-open: rawSystem: runInteractiveProcess: exec: does not
exist (No such file or directory)
Co-authored-by: Aaron Andersen <aaron@fosslib.net>
For images running on Kubernetes, there is no guarantee on how duplicate
environment variables in the image config will be handled. This seems
to be different from Docker, where the last environment variable value
is consistently selected.
The current code for `streamLayeredImage` was exploiting that assumption
to easily propagate environment variables from the base image, leaving
duplicates unchecked. It should rather resolve these duplicates to
ensure consistent behavior on Docker and Kubernetes.
It is now possible to pass a `fromImage` to `buildLayeredImage` and
`streamLayeredImage`, similar to what `buildImage` currently supports.
This will prepend the layers of the given base image to the resulting
image, while ensuring that at most `maxLayers` are used. It will also
ensure that environment variables from the base image are propagated
to the final image.
With the UMask set to 0023, the
mkdir -p command which creates the webroot
could end up unreadable if the web server
changes, as surfaced by the test suite in #114751
On top of this, the following commands
to chown the webroot + subdirectories was
mostly unnecessary. I stripped it back to
only fix the deepest part of the directory,
resolving #115976, and reintroduced a
human readable error message.
Reverted https://github.com/NixOS/nixpkgs/pull/115228 for kodi to avoid conflict.
It does not look like unzip would be used but not investigating now to speed up merge conflict resolution.
Adding template overrides allows for custom behavior for specific
instances of a template. Previously, it was not possible to provide
bind mounts for systemd-nspawn. This change allows it.
When using `buildLayeredImage`, it is not possible to specify an image
name of the form `<registry>/my/image`, although it is a valid name.
This is due to derivations under `buildLayeredImage` using that image
name as their derivation name, but slashes are not permitted in that
context.
A while ago, #13099 fixed that exact same problem in `buildImage` by
using `baseNameOf name` in derivation names instead of `name`. This
change does the same thing for `buildLayeredImage`.
We are running over 6000 tests by now and they take around 5 minutes
on faster machines and tests alot of components that endusers will not
actually be using. It is sufficient if we run them on package upgrades
and in the passthrough test.
The sysfs file /sys/kernel/mm/ksm/run seems to be available as soon as
the kernel has started, so no point in waiting for udev to "settle". If
for some reason it doesn't, we let the unit fail explicitly.
Launching a container with a private network requires creating a
dedicated networking interface for it; name of that interface is derived
from the container name itself - e.g. a container named `foo` gets
attached to an interface named `ve-foo`.
An interface name can span up to IFNAMSIZ characters, which means that a
container name must contain at most IFNAMSIZ - 3 - 1 = 11 characters;
it's a limit that we validate using a build-time assertion.
This limit has been upgraded with Linux 5.8, as it allows for an
interface to contain a so-called altname, which can be much longer,
while remaining treated as a first-class citizen.
Since altnames have been supported natively by systemd for a while now,
due diligence on our side ends with dropping the name-assertion on newer
kernels.
This commit closes #38509.
systemd/systemd#14467systemd/systemd#17220https://lwn.net/Articles/794289/
The NixOS manual documents that you can invoke every tests using
nix-build path/to/nixos/tests/test.nix
which was not the case for openldap since it is not autocallable, but
requires pkgs and system as arguments. Usually, make-test-pythons.nix
takes care of this if it is imported at the top-level, but since
openldap.nix contains multiple tests, this was not the case.
This is however easily fixed by:
* Adding default values for the pkgs and system arguments based on the
definition in make-test-python.nix
* Passing pkgs and system explicitly to make-test-python.nix to ensure
the pkgs and system values passed from all-tests.nix are used.
VM tests are expensive (and prone to random failures) so they should
only be used for things that can only be tested in a VM, not for
things that could be tested in a regular checkPhase or derivation.
The current Ceph tests use the old method for OSDs to store data on
disks, known as Filestore. This means there are no tests for the
Bluestore functionality that run on install, which means that things
like RocksDB being broken can slip through and break the Bluestore
functionality in a subtle and difficult to debug manner.
Add a test to check that Bluestore works, at least on a single node.
