Minimal ISO:
1m21 -> 2m25
625M -> 617M
Plasma5 ISO:
2m45 -> 5m18
1.4G -> 1.3G
Decompression speed stays about the same. It's just a few seconds for the whole
image anyways and, with that kind of speed, you're going to be bottlenecked by
IO long before the CPU.
The socketActivation option was removed, but later on socket activation
was added back without the option to disable it. The description now reflects
that socket activation is used unconditionally in the current setup.
Added JWT_SECRET and INTERNAL_TOKEN to be persistent, like SECRET_KEY and LFS_JWT_SECRET do. Also renamed some vars belonging to SECRET_KEY and LFS_JWT_SECRET to get a consistent naming scheme over all secrets.
Previously the Docker daemon was started by systemd socket activation.
Thus, the Docker test waited for the sockets.target unit.
But when the docker module was changed to start the Docker daemon at
boot instead of by socket activation, the test was left untouched.
With the Docker 20.10 update this lead to a timing issue, where the
docker command is run before the Docker daemon has started and hangs.
Fixes #109416
The comment at the top of git-and-tools/default.nix said:
/* All git-relates tools live here, in a separate attribute set so that users
* can get a fast overview over what's available.
but unfortunately that hasn't actually held up in practice.
Git-related packages have continued to be added to the top level, or
into gitAndTools, or sometimes both, basically at random, so having
gitAndTools is just confusing. In fact, until I looked as part of
working on getting rid of gitAndTools, one program (ydiff) was
packaged twice independently, once in gitAndTools and once at the top
level (I fixed this in 98c3490196).
So I think it's for the best if we move away from gitAndTools, and
just put all the packages it previously contained at the top level.
I've implemented this here by just making gitAndTools an alias for the
top level -- this saves having loads of lines in aliases.nix. This
means that people can keep referring to gitAndTools in their
configuration, but it won't be allowed to be used within Nixpkgs, and
it won't be presented to new users by e.g. nix search.
The only other change here that I'm aware of is that
appendToName "minimal" is not longer called on the default git
package, because doing that would have necessitated having a private
gitBase variable like before. I think it makes more sense not to do
that anyway, and reserve the "minimal" suffix only for gitMinimal.
Now that smtp_tls_security_level is using mkDefault, and therefore can
be overridden, there's no need for an option for overriding it to a
specific value.
I run Postfix on my workstation as a smarthost, where it only ever
talks to my SMTP server. Because I know it'll only ever connect to
this server, and because I know this server supports TLS, I'd like to
set smtp_tls_security_level to "encrypt" so Postfix won't fall back to
an unencrypted connection.
With libcap 2.41 the output of cap_to_text changed, also the original
author of code hoped that this would never happen.
To counter this now the security-wrapper only relies on the syscall
ABI, which is more stable and robust than string parsing. If new
breakages occur this will be more obvious because version numbers will
be incremented.
Furthermore all errors no make execution explicitly fail instead of
hiding errors behind debug environment variables and the code style was
more consistent with no goto fail; goto fail; vulnerabilities (https://gotofail.com/)
This commits deprecates `services.xserver.libinput` for multiple
settings, one for each kind of device:
- `services.xserver.libinput.mouse`
- `services.xserver.libinput.touchpad`
Looking at `man 4 libinput`, they basically have the same options so I
simply replicated them, even if some options doesn't make sense for
mouse (`tapping` for example).
With this commit this is now possible:
```nix
{
services.xserver.libinput = {
enable = true;
mouse = {
accelProfile = "flat";
};
touchpad = {
naturalScrolling = true;
};
};
}
```
And you will have a mouse with no natural scrolling but with accel
profile flat, while touchpad will have natural scrolling but accel
profile adaptative (default).
It is possible to support more device types
(tablets/keyboards/touchscreens), but at least looking at the
libinput manual for those devices it doesn't seem that it has any
configuration options for them. They can still be configured using
`services.xserver.inputClassSections` though, and this will work now
since there is no rule by default that matches them.
Closes issue #75007, while also making configuration of mouses and
touchpads using Nix attrs possible like said in PR #73785.
I found a logical error in the bash script, but during
debugging I enabled command echoing and realised it
would be a good idea to have it enabled all the time for
ease of bug reporting.
For in NixOS it is beneficial if both plasma5 and pam use the same Qt5
version. Because the plasma5 desktop may use a different version as the
default Qt5 version, we introduce plasma5Packages.
https://github.com/NixOS/nixpkgs/pull/107497 broke booting on many systems that
use tmpOnTmpfs due to the lack of specifying the mount type.
This commit explicitly adds the mount type, which should fix booting
such systems.
The original change may want to be revisited however too.
(The first version of this change, in commit 39fad297fd, broke
`nix-build -A nixosTests.installer.simpleUefiSystemdBoot`. This is the
2nd version, which hopefully does not break anything.)
`nixos-rebuild build-vm-with-bootloader` currently fails with the
default NixOS EFI configuration:
$ cat >configuration.nix <<EOF
{
fileSystems."/".device = "/dev/sda1";
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
}
EOF
$ nixos-rebuild build-vm-with-bootloader -I nixos-config=$PWD/configuration.nix -I nixpkgs=https://github.com/NixOS/nixpkgs/archive/nixos-20.09.tar.gz
[...]
insmod: ERROR: could not insert module /nix/store/1ibmgfr13r8b6xyn4f0wj115819f359c-linux-5.4.83/lib/modules/5.4.83/kernel/fs/efivarfs/efivarfs.ko.xz: No such device
mount: /sys/firmware/efi/efivars: mount point does not exist.
[ 1.908328] reboot: Power down
builder for '/nix/store/dx2ycclyknvibrskwmii42sgyalagjxa-nixos-boot-disk.drv' failed with exit code 32
[...]
Fix it by setting virtualisation.useEFIBoot = true when needed.
Before:
* release-20.03: successful build, unsuccessful run
* release-20.09 (and master): unsuccessful build
After:
* Successful build and run.
Fixes #107255
This corresponds to agetty's --login-options argument.
With this change, I can set
services.getty.autologinUser = "qyliss";
services.getty.loginOptions = "-- \\u";
and have my username prefilled, but with my password still
required (unlike the normal autologinUser behaviour).
b478e0043c removed every other instance of uwsgi.service and
httpd.service from Mailman before and requiredBy lists. This one
looks like it was just missed, since I can't see a reason to keep it
but remove the others.
Fixes: b478e0043c ("nixos/mailman: refactor")
* It should be made explicit in the eval-error that the CVE only affects
a component which is turned off by default.
* For more clarity, the default version used by the module is noted in
the manual.
Closes #108419
It's been 8.5 years since NixOS used mingetty, but the option was
never renamed (despite the file definining the module being renamed in
9f5051b76c ("Rename mingetty module to agetty")).
I've chosen to rename it to services.getty here, rather than
services.agetty, because getty is implemantation-neutral and also the
name of the unit that is generated.
By default in Nginx, if you want to override a single fastcgi_param,
you have to override all of them. This is less of a big deal if
you're editing the Nginx configuration directly, but when you're
generating the Nginx configuration with Nix it can be very annoying to
bloat your configuration repeating the default values of FastCGI
parameters every time.
This patch adds a fastcgiParams option to Nginx locations. If any
parameters are set through this, all the default values will be
included as well, so only the ones that are changing need to be
supplied. There's no way to use fastcgiParams to actually override
all parameters if that's what you want, but I think that's a niche use
case and it's still possible using extraConfig, which up until now was
the only option
Nginx allows the fastcgi_param directive in http and server scopes as
well as location, but here I only support location. It would be
possible to support the others, but I don't think it's worth it. It
would be a possible future enhancement if somebody has a need for it.
This plugin is used commonly enough that we should ensure it still
builds (and dovecot works) after loading it.
This is not yet perfect as we aren't testing any of it's functionality
but at least we ensure that dovecot continues to do the regular job.
Enabling the profile can lead to hard-to-debug issues, which should be
warned about in addition to the cost in features and performance.
See https://github.com/NixOS/nixpkgs/issues/108262 for an example.
androidenv did not previously write license files, which caused certain
gradle-based Android tools to fail. Restructure androidenv's list of
Android packages into a single repo.json file to prevent duplication
and enable us to extract the EULA texts, which we then hash with
builtins.hashString to produce the license files that Android gradle
tools look for.
Remove includeDocs and lldbVersions, as these have been removed
from the Android package repositories.
Improve documentation and examples.
* Content of `programlisting` shouldn't be indented, otherwise it's
weirdly indented in the output.
* Use `<xref linkend=.../>` in the release notes: then users can
directly go to the option documentation when reading release notes.
* Don't use docbook tags in `mkRemovedOptionModule`: it's only used
during evaluation where docbook isn't rendered.
Previously, after the version bump to v247, we broke journalctl --grep
as libpcre2 was lazily loaded during runtime using dlopen(3). This
ensures that we have a test case that alerts us when it fails again.
