on the next stdenv-updates.
This would fix the build for many cmake packages, although that requires updating the stdenv
in those for its gcc to use this 2nd wrapper.
I updated paraview and avidemux. I can't recall now more packages with problems, but I was
quite sure there were.
If anyone sees a cmake-built package with the result binaries lacking some rpaths, then try
this wrapper.
svn path=/nixpkgs/trunk/; revision=20669
cross-building nixpkgs implementation, were not referenced anywhere.
This new busybox builds natively, and also cross-builds with uclibc.
I updated the uclibc config with a busybox defconfig requirement (something about RPC).
I made the gcc-cross-wrapper properly set the dynamic loader to programs.
After this, 'qemu-arm' can run the dynamically linked busybox cross built for armv5tel--linux-gnueabi.
svn path=/nixpkgs/trunk/; revision=20514
I introduce the new nixpkgs parameter "platform", defaulting to "pc",
which was before defined as an attribute of nixpkgs.
I made the crossSystem nixpkgs attribute set parameter contain its own 'platform'.
This allows cross-building a kernel for a given crossSystem.platform in a non-PC
platform.
The actual native platform can be taken from stdenv.platform, and this way we also
avoid the constant passing of 'platform' to packages for platform-dependant builds
(kernel, initrd, ...).
I will update nixos accordingly to these changes, for non-PC platforms to work.
I think we are gaining on flexibility and clearness. I could cross build succesfully
an ultrasparc kernel and a mipsel kernel on PC. But since this change, I should be able
to do this also in non-PC.
Before this change, there was no possibility of distinguishing the "target platform" or
the "native build platform" when cross building, being the single "platform" attribute
always interpreted as target platform.
The platform is a quite relevant attribute set, as it determines the linuxHeaders used
(in the case, by now the only one supported, of linux targets).
The platform attributes are quite linux centric still. Let's hope for more generality to come.
svn path=/nixpkgs/trunk/; revision=20273
because it makes linking very slow. Use bash's =~ operator instead
(and only once for each argument). We depend on bash already anyway
because of arrays so it's not a problem.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19699
something'.
It should not link at least for '-x c-header' and '-x c++-header', and maybe
link for '-x c' or '-x c++', but we expect noone will be linking using these
later strings.
Adding opencv, which required '-x c-header' working, and that's why I have
updated gcc wrapper.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19491
I fixed conflicts regarding the renaming 'kernel' -> 'linux' in all-packages.
Also a small conflict in all-packages about making openssl overridable.
And I some linux 2.6.31-zen kernel files also marked in conflict.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19438
ghdl-wrapper.
I made the gcc-4.3.4 expression allow the 'vhdl' language through ghdl.
The ghdl developer recommends this gcc version; maybe it would work with
gcc-4.4. If not this ghdl version, maybe next versions.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19071
broke the evaluation of nixpkgs.
I also tried to make the gnat wrapper friendly to any gnat installation, not
only gnatboot.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19062
Some things don't work:
- The ghdl expression (it still needs the gcc 4.3.4 src, ...)
- The gnat wrappers need to be more generic - now they work only for the
given gnatboot (taken from gentoo) and gnats installed to their $out
store path.
- Using the cloogppl and ppl. We will need our own gnatboot built with c++
libraries for that.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19060
sheevaplug kernel, so the kernel does not build in the sheevaplug right now.
I will try to fix that in next commits.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19045
regexp looking for such ld arguments did not work well with "--soname=xxx.so".
Now I added the condition that the argument should not start with a hyphen, for
it to be possibly considered a .so file to link with.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18919
Removing any reference to the gcc-wrapper2, as now the gcc-wrapper already conveys
the changes, I created gcc-wrapper2 in trunk for.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18913
source regions which are substituded by the tool nix-repository-manager.
See http://github.com/MarcWeber/nix-repository-manager/raw/master/README.
sourceByName is called sourceFromHead now.
updates: MPlayerTrunk, haxe, neko, netsurf, cinelerra, ctags
cinelerra does no longer build due to Xorg update
svn path=/nixpkgs/trunk/; revision=18894
stdenv.
In this gcc-wrapper2 I made the ld-wrapper.sh to handle the linking with shared
objects through direct pass as ld command arguments of the absolute path to shared
objects, instead of using the -L/-l combinations.
cmake 'FindXXX.cmake' modules make a strong usage of the dynamic linking directly
passing the absolute path to the shared object to the linker, and as our wrapper did
not add any -rpath for those, writting the nix expressions for some cmake packages
resulted in a lot of tricks, compared to using this gcc-wrapper2.
This gcc-wrapper2/ld-wrapper.sh should become the gcc-wrapper/ld-wrapper in a
stdenv update.
I also updated some cmake expressions to use this gcc-wrapper2, and reduced its
tricks.
I also updated the cmake setup-hook for it to make cmake not touch any rpath decided
at build time, when running the 'make install' of makefiles created by cmake.
svn path=/nixpkgs/trunk/; revision=18885
renaming.
I think directory renaming breaks the usual merges... because it leaves the
'to be removed' directory in the working directory still. A manual 'rm' of the
'to be removed' directory fixed the commit.
svn merge ^/nixpkgs/trunk
svn path=/nixpkgs/branches/stdenv-updates/; revision=18661
native strip. So we now distinguish dontStrip and dontCrossStrip. I updated
the expressions for glibc-2.9 and glibc-2.11 accordingly.
I could get rid of the cross-glibc depending on the cross-gcc-stage-static.
Enabling nls in the final cross-gcc.
I still have problems on wint_t/wchar_t not working on cross build. Gettext
does not build.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18562
- Disabling guile test, because one fails. I commented on that in the source.
On cross builds:
- Adding stripping
- Updating the glibc-2.11 expression to match the parameters of glibc-2.9,
which I was updating more.
- Renaming from selfNativeBuildInput to selfBuildNativeInput, so this matches
better the pattern buildNativeInputs.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18550
- Before this changes, cflags and ldflags for the native and the cross compiler
got mixed. Not all the gcc-wrapper/gcc-cross-wrapper variables are
independant now, but enough, I think.
- Fixed the generic stdenv expression, which did a big mess on buildInputs and
buildNativeInputs. Now it distinguishes when there is a stdenvCross or not.
Maybe we should have a single stdenv and forget about the stdenvCross
adapter - this could end in a stdenv a bit complex, but simpler than the
generic stdenv + adapter.
- Added basic support in pkgconfig for cross-builds: a single PKG_CONFIG_PATH
now works for both the cross and the native compilers, but I think this
should work well for most cases I can think of.
- I tried to fix the guile expression to cross-biuld; guile is built, but not
its manual, so the derivation still fails. Guile requires patching to
cross-build, as far as I understnad.
- Made the glibcCross build to be done through the usage of a
gcc-cross-wrapper over the gcc-cross-stage-static, instead of using it
directly.
- Trying to make physfs (a neverball dependency) cross build.
- Updated the gcc expression to support building a cross compiler without getting
derivation variables mixed with those of the stdenvCross.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18534
- Stating better the guile dependencies (native/host) for guile to build
- Fixing cross-linking, through --rpath-link (ld(1) explains well about it
- Made gcc call the linker and the assembler through the gcc wrapper instead of
directly. I thought this was the source of missing -rpath's, but the source
of the problem ended up being the lack of --rpath-link. But I think the
native gcc calls the wrapped ld and as, so let's do the same cross
compiling.
- Removed the binutilsCross from the glibc expressions. Now they are built
using the gcc-cross-wrapper, and they were built with the direct gcc and
binutils before this change.
- I think patchelf and strip don't break the cross-compiled binaries, so I
reallow them on cross compilation.
- I disable the checkPhase on cross compilation. This made gmp and libtool
fail when cross compiled, iirc.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18498
linking path), and with this achieved bash being cross-compilable.
I fixed the few expressions involved in bash building, so they have well stated
native and non-native inputs.
I also tried to cross-build guile, and with this I found a problem in the
actual cross-gcc: it calls the binutils ld, instead of the ld wrapper. This
way, the programs/shared_libraries don't get the proper -rpath.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18497
derivation, the "buildInputs" in every stdenv mkDerivation don't map now
directly to the environment
variable "buildInputs" in the builder, but "buildNativeInputs". So, the inputs
build by the native compiler.
When cross compiling, they will map to the environment variable "buildInputs"
(yes, now the same name), which means does to be built with the cross compiler.
I think I improved the naming of variables a bit. There was a big mess,
specially in the stdenv adapter for cross building, and also in the default
builder script.
I also tried to add proper manager of propagatedInputBuilds, these being
propagated considering the host or build origin of that input build (so, at the
end, being those propagatedInputBuilds being propagated properly to the native
or the cross compiler.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18477
The `--depth' argument asks Git to fetch the last revisions of the given
repo on *any* branch, which is often useless.
Thanks to Lluís Battle for clarifying this.
svn path=/nixpkgs/trunk/; revision=18438
