VM tests are expensive (and prone to random failures) so they should
only be used for things that can only be tested in a VM, not for
things that could be tested in a regular checkPhase or derivation.
The current Ceph tests use the old method for OSDs to store data on
disks, known as Filestore. This means there are no tests for the
Bluestore functionality that run on install, which means that things
like RocksDB being broken can slip through and break the Bluestore
functionality in a subtle and difficult to debug manner.
Add a test to check that Bluestore works, at least on a single node.
Test for the option `networking.wireless.athUserRegulatoryDomain` to
make sure the underlying patch still applies for the latest kernel.
Also see NixOS/nixpkgs#108725.
Not everyone has a suitable remote builder set up, so the cross-compilation
tests that _include_ running the result are separate. That way, most people
can run the majority of the test suite without the extra setup.
This test allows to ensure the systemd-journal-gatewayd service is
responding correcly when the NixOS option `enableHttpGateway` is set.
The test has not been added into the main systemd test because a
graphical stack is not required (and rebuilding the graphical stack on
systemd change is huge).
This should NOT be backported to 20.09!
When 21.03 is released, the DB changes are about a year old and
operators had two release cycles for the upgrade. At this point it
should be fair to remove the compat layer to reduce the complexity of
the module itself.
nixos/tests/initrd-openvpn: Add test for openvpn in the initramfs
The module in this commit adds new options that allows the
integration of an OpenVPN client into the initrd.
This can be used e.g. to remotely unlock LUKS devices.
This commit also adds two tests for `boot.initrd.network.openvpn`.
The first one is a basic test to validate that a failing connection
does not prevent the machine from booting.
The second test validates that this module actually creates a valid
openvpn connection.
For this, it spawns three nodes:
- The client that uses boot.initrd.network.openvpn
- An OpenVPN server that acts as gateway and forwards a port
to the client
- A node that is external to the OpenVPN network
The client connects to the OpenVPN server and spawns a netcat instance
that echos a value to every client.
Afterwards, the external node checks if it receives this value over the
forwarded port on the OpenVPN gateway.
NixOS currently has issues with setting the FQDN of a system in a way
where standard tools work. In order to help with experimentation and
avoid regressions, add a test that checks that the hostname is
reported as the user wanted it to be.
Co-authored-by: Michael Weiss <dev.primeos@gmail.com>
This adds a simple test running GNU Hello cross-compiled for armv7l and
aarch64 inside a x86_64 VM with configured binfmt.
We already build the cross toolchains in other invocations, and building
hello itself is small.
This seems to have worked in 15f105d41f (5
months ago) but broke somewhere in the meantime.
The current module doesn't seem to be underdocumented and might need a
serious refactor. It requires quite some hacks to get it to work (see
https://github.com/NixOS/nixpkgs/issues/86305#issuecomment-621129942),
or how the ldap.nix test used systemd.services.openldap.preStart and
made quite some assumptions on internals.
Mic92 agreed on being added as a maintainer for the module, as he uses
it a lot and can possibly fix eventual breakages. For the most basic
startup breakages, the remaining openldap.nix test might suffice.
`doas` is a lighter alternative to `sudo` that "provide[s] 95% of the
features of `sudo` with a fraction of the codebase" [1]. I prefer it to
`sudo`, so I figured I would add a NixOS module in order for it to be
easier to use. The module is based off of the existing `sudo` module.
[1] https://github.com/Duncaen/OpenDoas
This is a follow-up to the PR #82026 that contains the promised tests.
In this test I am testing if we can properly propagate prefixes received
via DHCPv6 PD with the networkd options in our module system.
The comments in the test should be sufficient to follow the idea and
what is going on.
When testing WireGuard updates, I usually run the VM-tests with
different kernels to make sure we're not introducing accidental
regressions for e.g. older kernels.
I figured that we should automate this process to ensure continuously
that WireGuard works fine on several kernels.
For now I decided to test the latest LTS version (5.4) and
the latest kernel (currently 5.6). We can add more kernels in the
future, however this seems to significantly slow down evaluation and
time.
The list can be customized by running a command like this:
nix-build nixos/tests/wireguard --arg kernelVersionsToTest '["4.19"]'
The `kernelPackages` argument in the tests is null by default to make
sure that it's still possible to invoke the test-files directly. In that
case the default kernel of NixOS (currently 5.4) is used.
This was added in aade4e577b, but the
implementation of the ACME module has been entirely rewritten since
then, and the test seems to run fine on AArch64.
* nixos/k3s: simplify config expression
* nixos/k3s: add config assertions and trim unneeded bits
* nixos/k3s: add a test that k3s works; minor module improvements
This is a single-node test. Eventually we should also have a multi-node
test to verify the agent bit works, but that one's more involved.
* nixos/k3s: add option description
* nixos/k3s: add defaults for token/serveraddr
Now that the assertion enforces their presence, we dont' need to use the typesystem for it.
* nixos/k3s: remove unneeded sudo in test
* nixos/k3s: add to test list
Upgrades Hydra to the latest master/flake branch. To perform this
upgrade, it's needed to do a non-trivial db-migration which provides a
massive performance-improvement[1].
The basic ideas behind multi-step upgrades of services between NixOS versions
have been gathered already[2]. For further context it's recommended to
read this first.
Basically, the following steps are needed:
* Upgrade to a non-breaking version of Hydra with the db-changes
(columns are still nullable here). If `system.stateVersion` is set to
something older than 20.03, the package will be selected
automatically, otherwise `pkgs.hydra-migration` needs to be used.
* Run `hydra-backfill-ids` on the server.
* Deploy either `pkgs.hydra-unstable` (for Hydra master) or
`pkgs.hydra-flakes` (for flakes-support) to activate the optimization.
The steps are also documented in the release-notes and in the module
using `warnings`.
`pkgs.hydra` has been removed as latest Hydra doesn't compile with
`pkgs.nixStable` and to ensure a graceful migration using the newly
introduced packages.
To verify the approach, a simple vm-test has been added which verifies
the migration steps.
[1] https://github.com/NixOS/hydra/pull/711
[2] https://github.com/NixOS/nixpkgs/pull/82353#issuecomment-598269471
While our ETag patch works pretty fine if it comes to serving data off
store paths, it unfortunately broke something that might be a bit more
common, namely when using regexes to extract path components of
location directives for example.
Recently, @devhell has reported a bug with a nginx location directive
like this:
location ~^/\~([a-z0-9_]+)(/.*)?$" {
alias /home/$1/public_html$2;
}
While this might look harmless at first glance, it does however cause
issues with our ETag patch. The alias directive gets broken up by nginx
like this:
*2 http script copy: "/home/"
*2 http script capture: "foo"
*2 http script copy: "/public_html/"
*2 http script capture: "bar.txt"
In our patch however, we use realpath(3) to get the canonicalised path
from ngx_http_core_loc_conf_s.root, which returns the *configured* value
from the root or alias directive. So in the example above, realpath(3)
boils down to the following syscalls:
lstat("/home", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat("/home/$1", 0x7ffd08da6f60) = -1 ENOENT (No such file or directory)
During my review[1] of the initial patch, I didn't actually notice that
what we're doing here is returning NGX_ERROR if the realpath(3) call
fails, which in turn causes an HTTP 500 error.
Since our patch actually made the canonicalisation (and thus additional
syscalls) necessary, we really shouldn't introduce an additional error
so let's - at least for now - silently skip return value if realpath(3)
has failed.
However since we're using the unaltered root from the config we have
another issue, consider this root:
/nix/store/...-abcde/$1
Calling realpath(3) on this path will fail (except if there's a file
called "$1" of course), so even this fix is not enough because it
results in the ETag not being set to the store path hash.
While this is very ugly and we should fix this very soon, it's not as
serious as getting HTTP 500 errors for serving static files.
I added a small NixOS VM test, which uses the example above as a
regression test.
It seems that my memory is failing these days, since apparently I *knew*
about this issue since digging for existing issues in nixpkgs, I found
this similar pull request which I even reviewed:
https://github.com/NixOS/nixpkgs/pull/66532
However, since the comments weren't addressed and the author hasn't
responded to the pull request, I decided to keep this very commit and do
a follow-up pull request.
[1]: https://github.com/NixOS/nixpkgs/pull/48337
Signed-off-by: aszlig <aszlig@nix.build>
Reported-by: @devhell
Acked-by: @7c6f434c
Acked-by: @yorickvP
Merges: https://github.com/NixOS/nixpkgs/pull/80671
Fixes: https://github.com/NixOS/nixpkgs/pull/66532
Add a cage module to nixos. This can be used to make kiosk-style
systems that boot directly to a single application. The user (demo by
default) is automatically logged in by this service and the
program (xterm by default) is automatically started.
This is useful for some embedded, single-user systems where we want
automatic booting. To keep the system secure, the user should have
limited privileges.
Based on the service provided in the Cage wiki here:
https://github.com/Hjdskes/cage/wiki/Starting-Cage-on-boot-with-systemd
Co-Authored-By: Florian Klink <flokli@flokli.de>
