This is to fix the following error in the test on aarch64-linux:
store# [ 126.911144] thanos[739]: level=error ts=2019-06-16T14:00:26.59870538Z caller=main.go:182 msg="running command failed" err="error executing compaction: first pass of downsampling failed: create dir: mkdir /var/lib/thanos-compact/downsample: no space left on device"
store# [ 126.942655] systemd[1]: thanos-compact.service: Main process exited, code=exited, status=1/FAILURE
Upstream switched to a different type of ipset table, whereas we
create ipset in post-start which overrides upstream, and renders
sshguard ineffective.
Remove ipset creation from post-start, and let it get automatically
by upstream script (sshg-fw-ipset) as part of startup
Introduces a trim timer similar to the fstrim service.
According to zpool(8) for consumer hardware periodic manual TRIM
is preferred over automatic TRIM that ZFS implements.
The period of one week is based on recommendations of fstrim.
The default for logFile is /var/log/couchdb.log, and the tmpfile rules chown
${dirOf cfg.logFile}, which is just /var/log, to couchdb:couchdb.
This was found by Edes' report on IRC, which looked like
Detected unsafe path transition /var/log → /var/log/journal during canonicalization of /var/log/journal
While this bug has been present since the initial couchdb module in
62438c09f7 by @garbas, this wasn't a
problem, because the initial module only created and chowned /var/log
if it didn't exist yet, which can't occur because this gets created in
the initial phases of NixOS startup.
However with the recent move from manual preStart chown scripts to
systemd.tmpfiles.rules in 062efe018d (#59389),
this chown is suddenly running unconditionally at every system
activation, therefore triggering the above error.
Regression I caused with 3944aa051c, sorry
for this! The Nextcloud installer broke back then because
`trusted_domains` was an empty value by default (a.k.a an empty array)
which seemed to break the config merger of Nextcloud as Nextcloud
doesn't do recursive merging and now no domain was trusted because of
that, hence Nextcloud was unreachable for the `curl` call.
One of the main problems of the Nextcloud module is that it's currently
not possible to alter e.g. database configuration after the initial
setup as it's written by their imperative installer to a file.
After some research[1] it turned out that it's possible to override all values
with an additional config file. The documentation has been
slightly updated to remain up-to-date, but the warnings should
remain there as the imperative configuration is still used and may cause
unwanted side-effects.
Also simplified the postgresql test which uses `ensure{Databases,Users}` to
configure the database.
Fixes #49783
[1] https://github.com/NixOS/nixpkgs/issues/49783#issuecomment-483063922
When IPXE tests were added, an option was added for configuring only
the frontend, and the backend configuration was dropped entirely. This
caused most installer tests to fail.
Since version 3.0 all allowed IPs and subnets are exposed by the
exporter. With `-s` set on the CLI, instead of a comma-separated list,
each allowed IP and subnet will be in a single field with the schema
`allowed_ip_<index>`.
Introduce a new .plasma5.phononBackend option. Default value
"gstreamer" installs the same packages as before. "vlc" installs
only the vlc phonon backend.
Left to do: re-enable as needed in the usual situations.
This added ~286MiB to the base system closure, which is enough to bring
the sd images over the limit allowed on Hydra.
This adds handling for WASM binaries to binfmt’s emulatedSystems. To
enable, add this to your configuration:
boot.binfmt.emulatedSystems = [ "wasm32-wasi" ];
After rebuilding with nixos-rebuild switch, you can run wasm binaries
directly.
In commit d43dc68db3, @Mic92 split the
rootpw option to allow specifying it in a file kept outside the Nix
store, as an alternative to specifying the password directly in the
config.
Prior to that, rootpw's type was `str`, but in order to allow both
alternatives, it had to become `nullOr str` with a default of `null`. So
I can see why this assertion, that either rootpw or rootpwFile are
specified, makes sense to add here.
However, these options aren't used if the configDir option is set, so as
written this assertion breaks valid configurations, including the
configuration used by nixos/tests/ldap.nix.
So this patch fixes the assertion so that it doesn't fire if configDir
is set.
The old open-source driver for AMD/ATI GPUs is commonly known as "radeon"
despite the historical package name xf86-video-ati. For example it presents
itself as RADEON in the Xorg log. So adding "radeon" to videoDrivers should
work.
Also changed the docs for the videoDrivers option to use "radeon" in the
default value instead of "ati".
Fixes #37917
This is a refactor of how resolvconf is managed on NixOS. We split it
into a separate service which is enabled internally depending on whether
we want /etc/resolv.conf to be managed by it. Various services now take
advantage of those configuration options.
We also now use systemd instead of activation scripts to update
resolv.conf.
NetworkManager now uses the right option for rc-manager DNS
automatically, so the configuration option shouldn't be exposed.
The new option services.postfix.localRecipients allows
configuring the postfix option 'local_recipient_maps'. When
set to a list of user names (or patterns), that map
effectively replaces the lookup in the system's user
database that's used by default to determine which local
users are valid.
This option is useful to explicitly set local users that are
allowed to receive e-mail from the outside world. For local
injection i.e. via the 'sendmail' command this option has no
effect.
This commit brings a module that installs the
IBM Spectrum Protect (Tivoli Storage Manager)
command-line client together with its
system-wide client system-options file `dsm.sys`.
- Create a child configuration named "Work" with an extra config file.
- Name the default configuration as "Home" :-)
- Once the VM is setup, reboot and verify that it has booted into
default configuration.
- Reboot into the "Work" configuration via grub.
- Verify that we have booted into the "Work" configuration and that
the extra config file is present.
This test works for the simple grub configuration and simple UEFI
Grub configuration. UEFI Systemd is not included in the test.
We were already creating a group for the user under which to run syncthing but
we were defaulting to running as `nogroup`.
Additionally, use `install` instead of multiple calls to mkdir/cp/chown.
Basic test which confirms new inputs can be created and that messages
can be sent to a UDP-GELF input using `netcat`.
This test requires 4GB of RAM to avoid issues due insufficient
memory (please refer to `nixos/tests/elk.nix` for a detailed explanation of
the issue) for elasticsearch.
Also it's ensured that elasticsearch has an open HTTP port for communication
when starting `graylog`. This is a workaround to ensure that all services
are started in proper order, even in test environments with less power.
However this shouldn't be implemented in the `nixos/graylog` module as
this might be harmful when using elasticsearch clusters that require e.g.
authentication and/or run on different servers.
NixOS usually needs nscd just to have a single place where
LD_LIBRARY_PATH can be set to include all NSS modules, but nscd is also
useful if some of the NSS modules need to read files which are only
accessible by root.
For example, nixos/modules/config/ldap.nix needs this when
users.ldap.enable = true;
users.ldap.daemon.enable = false;
and users.ldap.bind.passwordFile exists. In that case, the module
creates an /etc/ldap.conf which is only readable by root, but which the
NSS module needs to read in order to find out what LDAP server to
connect to and with what credentials.
If nscd is started as root and configured with the server-user option in
nscd.conf, then it gives each NSS module the opportunity to initialize
itself before dropping privileges. The initialization happens in the
glibc-internal __nss_disable_nscd function, which pre-loads all the
configured NSS modules for passwd, group, hosts, and services (but not
netgroup for some reason?) and, for each loaded module, calls an init
function if one is defined. After that finishes, nscd's main() calls
nscd_init() which ends by calling finish_drop_privileges().
There are provisions in systemd for using DynamicUser with a service
which needs to drop privileges itself, so this patch does that.
Until now the startup failed with an error like this:
```
com.github.joschi.jadconfig.ValidationException: Parent path /var/lib/graylog/server for Node ID file at /var/lib/graylog/server/node-id is not a directory
```
This happens since `graylog.service` ensures that `/var/lib/graylog`
exists, however it doesn't take care of the directory for
`cfg.nodeIdFile`.
Thanks to @arianvp for pointing out that when DynamicUser is true,
systemd defaults the value of User to be the name of the unit, which in
this case is already "nscd".
This was supposed to go through a pull request
Revert "nodePackages: Regenerate node packages for nodejs 10 & 12"
This reverts commit 6a17bdf397.
Revert "nodejs-8_x: Drop package"
This reverts commit e06c97b71d.
