Bash's standard behavior of not propagating non-zero exit codes
through a pipeline is unexpected and almost universally
unwanted. Default to setting `pipefail` for the command being run;
it can still be turned off by prefixing the pipeline with
`set +o pipefail` if needed.
Also, set `errexit` and `nonunset` options to make the first command
of consecutive commands separated by `;` fail, and disallow
dereferencing unset variables respectively.
Previously, a failed backup would always overwrite ${db}.sql.gz,
because the bash `>` redirect truncates the file; even if the
backup was going to fail.
On the next run, the ${db}.prev.sql.gz backup would be
overwritten by the bad ${db}.sql.gz.
Now, if the backup fails, the ${db}.in-progress.sql.gz is in an
unknown state, but ${db}.sql.gz will not be written.
On the next run, ${db}.prev.sql.gz (our only good backup) will
not be overwritten because ${db}.sql.gz does not exist.
Commit 3a2e0c36e7 has removed
`--reuse-key` from default renew options, yet the tests still expected
keys not to change. This assertion is now removed, as they are supposed
to change on each renew/change.
PHP 7.3 won't be supported by upstream for the entire life cycle of
the 21.11 release.
Also drop the pcre' alias since it isn't needed anymore since we don't
need different pcre versions anymore.
When importing Nixpkgs within Nixpkgs, we should not consider aliases
to ensure we don't rely on them internally.
There are probably more places that need to be converted.
Previously this defaulted to the default MOTD in the solanum source
tree, and I don't want my friends to laugh at me. Includes a patch to
the tests to ensure that the MOTD is actually set.
This replicates the fix done in #109705 (solanum is a fork of charybdis,
so they share fundamental logic for this).
Signed-off-by: Christine Dodrill <me@christine.website>
Assert that the PostgreSQL version being deployed is the one used
upstream. Allow the user to override this assertion, since it's not
always possible or preferable to use the recommended one.
Since the update to wlroots 0.13 (e03dde82a7) the default VGA card
isn't supported anymore and we needed to switch to virtio (qxl didn't
work either). However, as it turned out "-vga virtio" (28b8cff301)
broke the test on AArch64. Luckily there's a third option that works on
all three supported platforms: virtio-gpu-pci
According to [0] "This device lacks VGA compatibility mode but is
otherwise identical to the virtio vga device. UEFI firmware can handle
this, and if your guests has drivers too you can use this instead of
virtio-vga. This will reduce the attack surface (no complex VGA
emulation support) and reduce the memory footprint by 8 MB (no pci
memory bar for VGA compatibility). This device can be placed in a PCI
Express slot."
So in the end this seems like the ideal choice :)
See also [1].
[0]: https://www.kraxel.org/blog/2019/09/display-devices-in-qemu/#virtio-gpu-pci
[1]: https://patches.openembedded.org/patch/164351/
The tests timeout on AArch64 (e.g. [0] and [1]), likely because the QEMU
option "-vga virtio" isn't supported there (unfortunately I currently
lack access to an AArch64 system with NixOS to investigate).
This also affects the test for Cage but that one is already limited to
x86_64-linux.
[0]: https://hydra.nixos.org/build/144148809
[1]: https://hydra.nixos.org/build/144103034
Adds includeStorePaths, allowing the omission of the store paths.
You generally want to leave it on, but tooling may disable this
to insert the store paths more efficiently via other means, such
as bind mounting the host store.
Starting Cagebreak as X11 client doesn't work anymore as wlroots 0.13
started to require the DRI3 extension which isn't supported by LLVMpipe:
machine # [ 13.508284] xsession[938]: 00:00:00.003 [ERROR] [backend/x11/backend.c:433] X11 does not support DRI3 extension
machine # [ 13.666989] show_signal_msg: 62 callbacks suppressed
machine # [ 13.666993] .cagebreak-wrap[938]: segfault at 8 ip 0000000000408574 sp 00007ffef76f2440 error 4 in .cagebreak-wrapped[407000+d000]
machine # [ 13.670483] Code: f4 ff ff 4c 8b 84 24 70 01 00 00 8d 45 01 48 89 c5 49 8b 3c c0 48 85 ff 75 e4 4c 89 c7 e8 84 f4 ff ff 48 8b bc 24 18 01 00 00 <48> 8b 47 08 4c 8d 6f d8 48 8d 68 d8 48 39 df 75 0e eb 36 66 0f 1f
machine # [ 13.518274] xsession[938]: 00:00:00.006 [ERROR] [../cagebreak.c:313] Unable to create the wlroots backend
The test broke after updating Cagebreak in #121652 (bf8679ba94).
XWayland still fails for unknown reasons:
Modifiers specified, but DRI is too old
libEGL warning: DRI2: failed to create dri screen
libEGL warning: NEEDS EXTENSION: falling back to kms_swrast
glamor: No eglstream capable devices found
glamor: 'wl_drm' not supported
Missing Wayland requirements for glamor GBM backend
Missing Wayland requirements for glamor EGLStream backend
Failed to initialize glamor, falling back to sw
00:00:03.534 [ERROR] [xwayland/server.c:252] waitpid for Xwayland fork
failed: No child processes
(EE) failed to write to XWayland fd: Broken pipe
/nix/store/kcm3x8695fgycf31grzl9fy5gggwpram-xterm-367/bin/xterm: Xt
error: Can't open display: :0
The fallback to software rendering is to be expected but it looks like
XWayland is crashing with "failed to write to XWayland fd: Broken pipe".
While looking at the sphinx package I noticed it was heavily
undermaintained, which is when we noticed nand0p has been inactive for
roughly 18 months. It is therefore prudent to assume they will not be
maintaining their packages, modules and tests.
- Their last contribution to nixpkgs was in 2019/12
- On 2021/05/08 I wrote them an email to the address listed in the
maintainer-list, which they didn't reply to.
- use "with subtest" everywhere
- do more in nix and less in python
- use makeTest directly to define multiple tests instead of one with
multiple nodes -> this enables them to run in parallel
- Thunderbird 68 has been dropped on master.
- gccCrossLibcStdenv has been factored out on staging-next in all-packages.nix, while the file has been re-formatted on master.
As per #121293, I ensured the UMask is set correctly
and removed any unnecessary chmod/chown/chgrp commands.
The test suite already partially covered permissions
checking but I added an extra check for the selfsigned
cert permissions.
AFAIK this is the only reliable way for us to ensure SQLCipher will be
loaded instead of SQLite. It feels like a hack/workaround but according
to the SQLCipher developers [0] "this issue can and should be handled
downstream at the application level: 1. While it may feel like a
workaround, using LD_PRELOAD is a legitimate approach here because it
will substitute the system SQLite with SQLCipher which is the intended
usage model;".
This fixes #108772 for NixOS 20.09 users who upgrade to NixOS 21.05 and
replaces #117555.
For nixos-unstable users this will unfortunately break everything again
so we should add a script to ease the transition (in a separate commit
so that we can revert it for NixOS 21.05).
[0]: https://github.com/sqlcipher/sqlcipher/issues/385#issuecomment-802874340
Well, this should test if the database is encrypted but currently it is
still unencrypted and we need to notice if this behaviour changes in the
future (as it will cause data loss, see e.g. #108772).
Anyway, this doesn't really matter for security reasons but we need this
test to prevent data loss (unfortunately Signal-Desktop and SQLCipher
handle this badly... :o).
This test is important to confirm that $WAYLAND_DISPLAY is correctly
imported via "dbus-update-activation-environment --systemd" which is
done by default since #122605 (00e8e5b123).
It ensures that the gnome3-pinentry pop-ups work as expected to avoid
regressions like #119445 (which also broke screen sharing).
config.boot.kernelPackages.wireguard evaluates to null on machine
closure having a > 5.6 Linux kernels, hence making the evaluation of
this test fail.
Wireguard is now part of the mainline Linux kernel, we do not need to
to add it via a additional kernel module anymore for this test.
Annoyed with the interference of the python formatting of
generated code (see #72964), I took matters into my own hands
as maintainer of dockerTools.
Afterwards, I've created a PR, hoping to unstuck the discussion.
@aszlig took notice and thanks to his python ecosystem knowledge,
the testing efforts of @blaggacao and @Ma27, and a sense of
shared suffering and comraderie we were able to change the
situation for the better in #122201.
Now, we have a proper linter that actually helps contributors,
so it's time to turn it back on again.
I'm glad we could make it happen this quickly!
Thanks!
This reverts commit 4035049af3.
There were a bunch of unnecessary f-strings in there and I also removed
the "# fmt: on/off" comments, because we no longer use Black and thus
won't need those comments anymore.
Signed-off-by: aszlig <aszlig@nix.build>
The new linter basically does
def testScript
# ...
before calling `pyflakes`. As this test-script is empty, it would lead
to a syntax-error unless `pass` is added.
(It was requested by them.)
I left one case due to fetching from their personal repo:
pkgs/desktops/pantheon/desktop/extra-elementary-contracts/default.nix
This adds a basic test for Sway. Because Sway is an important part of
the Wayland ecosystem, is stable, and has few dependencies this test
should also be suitable for testing core packages it depends on (e.g.
wayland, wayland-protocols, wlroots, xwayland, mesa, libglvnd, libdrm,
and soon libseat).
The test is modeled after the suggested way of using Sway, i.e. logging
in via a virtual console (tty1) and copying the configuration from
/etc/sway/config (we replace Mod4 (the GNU/Tux key - you've replaced
that evil logo, right? :D) with Mod1 (Alt key) because QEMU monitor's
sendkey command doesn't support the former).
The shell aliases are used to make the sendkey log output shorter.
Co-authored-by: Patrick Hilhorst <git@hilhorst.be>
The radicale version is no longer chosen automatically based on
system.stateVersion because that gave the impression that old versions
are still supported.
Follow RFC 42 by having a settings option that is
then converted into an unbound configuration file
instead of having an extraConfig option.
Existing options have been renamed or kept if
possible.
An enableRemoteAccess has been added. It sets remote-control setting to
true in unbound.conf which in turn enables the new wrapping of
unbound-control to access the server locally. Also includes options
'remoteAccessInterfaces' and 'remoteAccessPort' for remote access.
Signed-off-by: Marc 'risson' Schmitt <marc.schmitt@risson.space>
