osquery was marked as broken since April.
If somebody steps up to fix it, we can always revive it from the
histroy, but there's not much value in shipping completely broken things
in current master.
cc @ma27
The package set is not maintained. It is also not used by most of the
BEAM community. Removing it to allow a more useful set of tools fit to
the BEAM community in Nixpkgs.
Add --use-remote-sudo option. When set, remote commands will be prefixed
with 'sudo'. This allows using sudo remotely _without_ having to use
sudo locally (when using --build-host/--taget-host).
Also add --all, which shows the value of all options. Diffing the --all
output on either side of contemplated changes is a lovely way to better
understand what's going on inside nixos.
Before, we very carefully unapplied and reapplied `set -u` so the rest
of Nixpkgs could continue to not fail on undefined variables. Let's rip
off the band-aid.
Just maching all network interfaces caused many breakages, see #18962
and #71106.
We already don't support the global networking.useDHCP,
networking.defaultGateway(6) options if networking.useNetworkd is
enabled, but direct users to configure the per-device
networking.interfaces.<name?>.… options.
Even though the release obviously already happened, I think it might
still make sense to add a short note about the attributes not being
supported any longer (and going forward).
(cherry picked from commit 7163d3a9df)
(cherry picked from commit a64b8c3c19)
This option was removed because allowing (multiple) regular users to
override host entries affecting the whole system opens up a huge attack
vector. There seem to be very rare cases where this might be useful.
Consider setting system-wide host entries using networking.hosts,
provide them via the DNS server in your network, or use
networking.networkmanager.appendNameservers to point your system to
another (local) nameserver to set those entries.
This solves the dependency cycle in gcr alternatively so there won't be
two gnupg store paths in a standard NixOS system which has udisks2 enabled
by default.
NixOS users are expected to use the gpg-agent user service to pull in the
appropriate pinentry flavour or install it on their systemPackages and set
it in their local gnupg agent config instead.
Co-authored-by: Florian Klink <flokli@flokli.de>
This solves the dependency cycle in gcr alternatively so there won't be
two gnupg store paths in a standard NixOS system which has udisks2 enabled
by default.
NixOS users are expected to use the gpg-agent user service to pull in the
appropriate pinentry flavour or install it on their systemPackages and set
it in their local gnupg agent config instead.
Co-authored-by: Florian Klink <flokli@flokli.de>
This commits makes it clearer to a novice reader how to configure several
diferent types of SSID connections that were otherwise obscurely documented
Resolves #66650
The state path now, since the transition from initialization in
preStart to using systemd-tmpfiles, has the following restriction: no
parent directory can be owned by any other user than root or the user
specified in services.gitlab.user. This is a potentially breaking
change and the cause of the error isn't immediately obvious, so
document it both in the release notes and statePath description.
Even a simple typo fix can result in a reflow of a whole paragraph, leading to illegible diffs. The majority of text editors supports wrapping the source code to a comfortable width so it makes sense to me to sacrifice the few that do not rather than the unfortunately line-oriented diff tools.
This plugin is fairly outdated and depends on python2 libraries that
don't receive any updates either (xmpppy for instance[1]).
[1] https://pypi.org/project/xmpppy/
* remove kinetic
* release note
* add johanot as maintainer
nixos/ceph: create option for mgr_module_path
- since the upstream default is no longer correct in v14
* fix module, default location for libexec has changed
* ceph: fix test
The redis module currently fails to start up, most likely due to running
a chown as non-root in preStart.
While at it, I hardcoded it to use systemd's StateDirectory and
DynamicUser to manage directory permissions, removed the unused
appendOnlyFilename option, and the pidFile option.
We properly tell redis now it's daemonized, and it'll use notify support
to signal readiness.
It currently lacks an emoji font-family which means it has to be
disabled for them to function [0]. Additionally it's fallen out of
necessity to ship custom font rendering settings (as far as I'm aware
of).
[0]: https://github.com/NixOS/nixpkgs/pull/67215
* nixos/acme: Fix ordering of cert requests
When subsequent certificates would be added, they would
not wake up nginx correctly due to target units only being triggered
once. We now added more fine-grained systemd dependencies to make sure
nginx always is aware of new certificates and doesn't restart too early
resulting in a crash.
Furthermore, the acme module has been refactored. Mostly to get
rid of the deprecated PermissionStartOnly systemd options which were
deprecated. Below is a summary of changes made.
* Use SERVICE_RESULT to determine status
This was added in systemd v232. we don't have to keep track
of the EXITCODE ourselves anymore.
* Add regression test for requesting mutliple domains
* Deprecate 'directory' option
We now use systemd's StateDirectory option to manage
create and permissions of the acme state directory.
* The webroot is created using a systemd.tmpfiles.rules rule
instead of the preStart script.
* Depend on certs directly
By getting rid of the target units, we make sure ordering
is correct in the case that you add new certs after already
having deployed some.
Reason it broke before: acme-certificates.target would
be in active state, and if you then add a new cert, it
would still be active and hence nginx would restart
without even requesting a new cert. Not good! We
make the dependencies more fine-grained now. this should fix that
* Remove activationDelay option
It complicated the code a lot, and is rather arbitrary. What if
your activation script takes more than activationDelay seconds?
Instead, one should use systemd dependencies to make sure some
action happens before setting the certificate live.
e.g. If you want to wait until your cert is published in DNS DANE /
TLSA, you could create a unit that blocks until it appears in DNS:
```
RequiredBy=acme-${cert}.service
After=acme-${cert}.service
ExecStart=publish-wait-for-dns-script
```
The `keys.target` is used to indicate whether all NixOps keys were
successfully uploaded on an unattended reboot. However this can cause
startup issues e.g. with NixOS containers (see #67265) and can block
boots even though this might not be needed (e.g. with a dovecot2
instance running that doesn't need any of the NixOps keys).
As described in the NixOps manual[1], dependencies to keys should be
defined like this now:
``` nix
{
systemd.services.myservice = {
after = [ "secret-key.service" ];
wants = [ "secret-key.service" ];
};
}
```
However I'd leave the issue open until it's discussed whether or not to
keep `keys.target` in `nixpkgs`.
[1] https://nixos.org/nixops/manual/#idm140737322342384
systemd provides two sysctl snippets, 50-coredump.conf and
50-default.conf.
These enable:
- Loose reverse path filtering
- Source route filtering
- `fq_codel` as a packet scheduler (this helps to fight bufferbloat)
This also configures the kernel to pass coredumps to `systemd-coredump`.
These sysctl snippets can be found in `/etc/sysctl.d/50-*.conf`,
and overridden via `boot.kernel.sysctl`
(which will place the parameters in `/etc/sysctl.d/60-nixos.conf`.
Let's start using these, like other distros already do for quite some
time, and remove those duplicate `boot.kernel.sysctl` options we
previously did set.
In the case of rp_filter (which systemd would set to 2 (loose)), make
our overrides to "1" more explicit.
sysctl.d(5) recommends prefixing all filenames in /etc/sysctl.d with a
two-digit number and a dash, to simplify the ordering of the files.
Some packages provide custom files, often with "50-" prefix.
To ensure user-supplied configuration takes precedence over the one
specified via `boot.kernel.sysctl`, prefix the file generated there with
"60-".
There's many reason why it is and is going to
continue to be difficult to do this:
1. All display-managers (excluding slim) default PAM rules
disallow root auto login.
2. We can't use wayland
3. We have to use system-wide pulseaudio
4. It could break applications in the session.
This happened to dolphin in plasma5
in the past.
This is a growing technical debt, let's just use
passwordless sudo.
ibus-qt has not seen a release in 5 years and is only relevant for Qt
4.x, which is becoming more and more rare. Using my current laptop as a
data point, ibus-qt is the only dependency left that drags in qt-4.8.7.
Motivation is to support other repositories containing nixos
modules that would like to generate options documentation:
- nix-darwin
- private repos
- arion
- ??
One of the main problems of the Nextcloud module is that it's currently
not possible to alter e.g. database configuration after the initial
setup as it's written by their imperative installer to a file.
After some research[1] it turned out that it's possible to override all values
with an additional config file. The documentation has been
slightly updated to remain up-to-date, but the warnings should
remain there as the imperative configuration is still used and may cause
unwanted side-effects.
Also simplified the postgresql test which uses `ensure{Databases,Users}` to
configure the database.
Fixes #49783
[1] https://github.com/NixOS/nixpkgs/issues/49783#issuecomment-483063922
This was supposed to go through a pull request
Revert "nodePackages: Regenerate node packages for nodejs 10 & 12"
This reverts commit 6a17bdf397.
Revert "nodejs-8_x: Drop package"
This reverts commit e06c97b71d.
PHP 7.1 is currently on life support, as in only recieving security related patches.
This will only continue until: 2019-12-01
This date are in the middle of the 19.09 lifecycle. So it would be
nice to not have it in the 19.09 stable release. Dropping it now would
also result in less maintanance in updating them.
The death dates can be seen on following links:
- https://endoflife.date/php
- https://php.net/supported-versions.php
- https://en.wikipedia.org/wiki/PHP#Release_history
It seems as the sentence at the bottom of the option summary about
Nix-specific options isn't enough, it's probably more helpful to list
those options in the synopsis as well.
The autoLuks module is not really compatible with the updated systemd
version anymore. We started dropping NixOS specific patches that caused
unwanted side effects that we had to work around otherwise.
This change points users towards the relevant PR and spits out a bit of
information on how to deal with the situation.
Somewhen between systemd v239 and v242 upstream decided to no longer run
a few system services with `DyanmicUser=1` but failed to provide a
migration path for all the state those services left behind.
For the case of systemd-timesync the state has to be moved from
/var/lib/private/systemd/timesync to /var/lib/systemd/timesync if
/var/lib/systemd/timesync is currently a symlink.
We only do this if the stateVersion is still below 19.09 to avoid
starting to have an ever growing activation script for (then) ancient
systemd migrations that are no longer required.
See https://github.com/systemd/systemd/issues/12131 for details about
the missing migration path and related discussion.
mysql already has its socket path hardcoded to to
/run/mysqld/mysqld.sock.
There's not much value in making the pidDir configurable, which also
points to /run/mysqld by default.
We only seem to use `services.mysql.pidDir` in the wordpress startup
script, to wait for mysql to boot up, but we can also simply wait on the
(hardcoded) socket location too.
A much nicer way to accomplish that would be to properly describe a
dependency on mysqld.service. This however is not easily doable, due to
how the apache-httpd module was designed.
As we don't need to setup data directories from ExecStartPre= scripts
anymore, which required root, but use systemd.tmpfiles.rules instead,
everything can be run as just the mysql user.
Some packages like `ibus-engines.typing-booster` require the dictionary
`fr_FR.dic` to provide proper support for the french language.
Until now the hunspell package set of nixpkgs didn't provide this
dictionary. It has been recommended to use `fr-moderne` as base and link
`fr_FR.dic` from it as done by other distros such as ArchLinux.
See https://github.com/NixOS/nixpkgs/issues/46940#issuecomment-423684570
Fixes #46940
The build error has been introduced by 56dcc319cf.
Using a <simplesect/> within a <para/> is not allowed and subsequently
fails to validate while building the manual.
So instead, I moved the <simplesect/> further down and outside of the
<para/> to fix this.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @aaronjanse, @Lassulus, @danbst
I have a nixops network where I deploy containers using the `container`
backend which uses `nixos-container` intenrally to deploy several
containers to a certain host.
During that time I removed and added new containers and while trying to
deploy those to a different host I realized that it isn't guaranteed
that each container gets the same IP address which is a problem as some
parts of the deployment need to know which container is using which IP
(i.e. to configure port forwarding on the host).
With this change you can specify the container's IP like this (and don't
have to use the arbitrarily used 10.233.0.0/16 subnet):
```
$ nixos-container create test --config-file test-container.nix \
--local-address 10.235.1.2 --host-address 10.235.1.1
```
Commit 29d7d8f44d has introduced another
section with the ID "sec-release-19.09-incompatibilities", which
subsequently causes the build to fail.
I just merged both sections and the manual is now building again.
Signed-off-by: aszlig <aszlig@nix.build>
Currently if you want to properly chroot a systemd service, you could do
it using BindReadOnlyPaths=/nix/store or use a separate derivation which
gathers the runtime closure of the service you want to chroot. The
former is the easier method and there is also a method directly offered
by systemd, called ProtectSystem, which still leaves the whole store
accessible. The latter however is a bit more involved, because you need
to bind-mount each store path of the runtime closure of the service you
want to chroot.
This can be achieved using pkgs.closureInfo and a small derivation that
packs everything into a systemd unit, which later can be added to
systemd.packages.
However, this process is a bit tedious, so the changes here implement
this in a more generic way.
Now if you want to chroot a systemd service, all you need to do is:
{
systemd.services.myservice = {
description = "My Shiny Service";
wantedBy = [ "multi-user.target" ];
confinement.enable = true;
serviceConfig.ExecStart = "${pkgs.myservice}/bin/myservice";
};
}
If more than the dependencies for the ExecStart* and ExecStop* (which
btw. also includes script and {pre,post}Start) need to be in the chroot,
it can be specified using the confinement.packages option. By default
(which uses the full-apivfs confinement mode), a user namespace is set
up as well and /proc, /sys and /dev are mounted appropriately.
In addition - and by default - a /bin/sh executable is provided, which
is useful for most programs that use the system() C library call to
execute commands via shell.
Unfortunately, there are a few limitations at the moment. The first
being that DynamicUser doesn't work in conjunction with tmpfs, because
systemd seems to ignore the TemporaryFileSystem option if DynamicUser is
enabled. I started implementing a workaround to do this, but I decided
to not include it as part of this pull request, because it needs a lot
more testing to ensure it's consistent with the behaviour without
DynamicUser.
The second limitation/issue is that RootDirectoryStartOnly doesn't work
right now, because it only affects the RootDirectory option and doesn't
include/exclude the individual bind mounts or the tmpfs.
A quirk we do have right now is that systemd tries to create a /usr
directory within the chroot, which subsequently fails. Fortunately, this
is just an ugly error and not a hard failure.
The changes also come with a changelog entry for NixOS 19.03, which is
why I asked for a vote of the NixOS 19.03 stable maintainers whether to
include it (I admit it's a bit late a few days before official release,
sorry for that):
@samueldr:
Via pull request comment[1]:
+1 for backporting as this only enhances the feature set of nixos,
and does not (at a glance) change existing behaviours.
Via IRC:
new feature: -1, tests +1, we're at zero, self-contained, with no
global effects without actively using it, +1, I think it's good
@lheckemann:
Via pull request comment[2]:
I'm neutral on backporting. On the one hand, as @samueldr says,
this doesn't change any existing functionality. On the other hand,
it's a new feature and we're well past the feature freeze, which
AFAIU is intended so that new, potentially buggy features aren't
introduced in the "stabilisation period". It is a cool feature
though? :)
A few other people on IRC didn't have opposition either against late
inclusion into NixOS 19.03:
@edolstra: "I'm not against it"
@Infinisil: "+1 from me as well"
@grahamc: "IMO its up to the RMs"
So that makes +1 from @samueldr, 0 from @lheckemann, 0 from @edolstra
and +1 from @Infinisil (even though he's not a release manager) and no
opposition from anyone, which is the reason why I'm merging this right
now.
I also would like to thank @Infinisil, @edolstra and @danbst for their
reviews.
[1]: https://github.com/NixOS/nixpkgs/pull/57519#issuecomment-477322127
[2]: https://github.com/NixOS/nixpkgs/pull/57519#issuecomment-477548395
eb90d97009 broke nslcd, as /run/nslcd was
created/chowned as root user, while nslcd wants to do parts as nslcd
user.
This commit changes the nslcd to run with the proper uid/gid from the
start (through User= and Group=), so the RuntimeDirectory has proper
permissions, too.
In some cases, secrets are baked into nslcd's config file during startup
(so we don't want to provide it from the store).
This config file is normally hard-wired to /etc/nslcd.conf, but we don't
want to use PermissionsStartOnly anymore (#56265), and activation
scripts are ugly, so redirect /etc/nslcd.conf to /run/nslcd/nslcd.conf,
which now gets provisioned inside ExecStartPre=.
This change requires the files referenced to in
users.ldap.bind.passwordFile and users.ldap.daemon.rootpwmodpwFile to be
readable by the nslcd user (in the non-nslcd case, this was already the
case for users.ldap.bind.passwordFile)
fixes #57783
First of all, the reason I added this to the "highlights" section is
that we want users to be aware of these options, because in the end we
really want to decrease the attack surface of NixOS services and this is
a step towards improving that situation.
The reason why I'm adding this to the changelog of the NixOS 19.03
release instead of 19.09 is that it makes backporting services that use
these options easier. Doing the backport of the confinement module after
the official release would mean that it's not part of the release
announcement and potentially could fall under the radar of most users.
These options and the whole module also do not change anything in
existing services or affect other modules, so they're purely optional.
Adding this "last minute" to the 19.03 release doesn't hurt and is
probably a good preparation for the next months where we hopefully
confine as much services as we can :-)
I also have asked @samueldr and @lheckemann, whether they're okay with
the inclusion in 19.03. While so far only @samueldr has accepted the
change, we can still move the changelog entry to the NixOS 19.09 release
notes in case @lheckemann rejects it.
Signed-off-by: aszlig <aszlig@nix.build>
I'm not 100% sure about the incompatibility lines,
but I believe it's better to discourage these anyway.
If you find better information, feel free to amend...
The 32-bit thing is completely GPU-agnostic, so I can't see why we had
it separately for proprietary drivers and missing for the rest.
Compatibility with other distributions/software and expectation
of users coming from other systems should have higher priority over consistency.
In particular this fixes #51375, where the NetworkManager-wait-online.service
broke as a result of this.
This is a backwards-incompatible change and while it won't probably
affect a whole lot of users, it makes sense to give them a heads-up
anyway.
Signed-off-by: aszlig <aszlig@nix.build>
The function `addCheck` resides within the attrset `types`. We should be
explicit about this since otherwise people might be confused where it
does come from / why it doesn't work for them.
The explicit remove helped to uncover some hidden uses of `optionSet`
in NixOps. However it makes life harder for end-users of NixOps - it will
be impossible to deploy 19.03 systems with old NixOps, but there is no
new release of NixOps with `optionSet` fixes.
Also, "deprecation" process isn't well defined. Even that `optionSet` was
declared "deprecated" for many years, it was never announced. Hence, I
leave "deprecation" announce. Then, 3 releases after announce,
we can announce removal of this feature.
This type has to be removed, not `throw`-ed in runtime, because it makes
some perfectly fine code to fail. For example:
```
$ nix-instantiate --eval -E '(import <nixpkgs/lib>).types' --strict
trace: `types.list` is deprecated; use `types.listOf` instead
error: types.optionSet is deprecated; use types.submodule instead
(use '--show-trace' to show detailed location information)
```
Before this change `man 5 configuration.nix` would only show options of modules in
the `baseModules` set, which consists only of the list of modules in
`nixos/modules/module-list.nix`
With this change applied and `documentation.nixos.includeAllModules` option enabled
all modules included in `configuration.nix` file will be used instead.
This makes configurations with custom modules self-documenting. It also means
that importing non-`baseModules` modules like `gce.nix` or `azure.nix`
will make their documentation available in `man 5 configuration.nix`.
`documentation.nixos.includeAllModules` is currently set to `false` by
default as enabling it usually uncovers bugs and prevents evaluation.
It should be set to `true` in a release or two.
This was originally implemented in #47177, edited for more configurability,
documented and rebased onto master by @oxij.
system-sendmail allows all sendmail's to be auto-detected, including on
non-NixOS systems. This is, to me, a better UX than having to manually
override the sendmailPath argument.
In exchange, it is a breach of retro-compatibility. Given right now I
can't see any uses for sendmailPath other than what is supported by
system-sendmail, I didn't keep it, but it'd be possible to allow
sendmailPath to override the choice of sendmail from system-sendmail.
* pr-55320:
nixos/release-notes: mention breaking changes with matrix-synapse update
nixos/matrix-synapse: reload service with SIGHUP
nixos/tests/matrix-synapse: generate ca and certificates
nixos/matrix-synapse: use python to launch synapse
pythonPackages.pymacaroons-pynacl: remove unmaintained fork
matrix-synapse: 0.34.1.1 -> 0.99.0
pythonPackages.pymacaroons: init at 0.13.0
* redmine: 3.4.8 -> 4.0.1
* nixos/redmine: update nixos test to run against both redmine 3.x and 4.x series
* nixos/redmine: default new installs from 19.03 onward to redmine 4.x series, while keeping existing installs on redmine 3.x series
* nixos/redmine: add comment about default redmine package to 19.03 release notes
* redmine: add aandersea as a maintainer
Also simplified the argument parsing to write all currently supported
CLI options into a bash array and pass this to `nix-build`.
Also documented `--option` usage in the corresponding manpage.
The motivation for this is that some applications are unaware
of this feature and can set their volume to 100% on startup
harming people ears and possiblly blowing someone's audio
setup.
I noticed this in #54594 and by extension epiphany[0].
Please also note that many other distros have this default for
the reason outlined above.
Closes #5632#54594
[0]: https://bugzilla.gnome.org/show_bug.cgi?id=675217
- add `zramSwap.algorithm` option, which allows to change compressor
declaratively. zstd as default
- add `zramSwap.swapDevices` option, which allows to define how many zram
devices will be used as swap. Rest devices can be managed freely
- simpler floating calculations
- fix udev race condition
- some documentation changes
- replaced `/sys/block/zram*` handling with `zramctl`, because I had occasional
"Device is busy" error (looks like zram has to be configured in predefined order)
- added `memoryPercent` and `algorithm` as restart triggers. I think, it was
a bug that changing `memoryPercent` in configuration wasn't applied immediately.
- removed a bind to .swap device. While it looks natural (when swap device goes
off, so should zram device), it wasn't implemented properly. This caused problems
with swapon/swapoff:
```
$ cat /proc/swaps
Filename Type Size Used Priority
/dev/zram0 partition 8166024 0 -2
/var/swapfile file 5119996 5120 1
$ sudo swapoff -a
$ sudo swapon -a
swapon: /dev/zram0: read swap header failed
$ cat /proc/swaps
Filename Type Size Used Priority
/var/swapfile file 5119996 0 1
```
Since nix 2.0 the no-build-hook option was replaced by the builders options
that allows to override remote builders ad-hoc.
Since it is useful to disable remote builders updating nixos without network,
this commit reintroduces the option.
This adds a NixOS option for setting the CPU max and min frequencies
with `cpufreq`. The two options that have been added are:
- `powerManagement.cpufreq.max`
- `powerManagement.cpufreq.min`
It also adds an alias to the `powerManagement.cpuFreqGovernor` option as
`powerManagement.cpufreq.governor`. This updates the installer to use
the new option name. It also updates the manual with a note about
the new name.
Having pam_unix set to "sufficient" means early-succeeding account
management group, as soon as pam_unix.so is succeeding.
This is not sufficient. For example, nixos modules might install nss
modules for user lookup, so pam_unix.so succeeds, and we end the stack
successfully, even though other pam account modules might want to do
more extensive checks.
Other distros seem to set pam_unix.so to 'required', so if there are
other pam modules in that management group, they get a chance to do some
validation too.
For SSSD, @PsyanticY already added a workaround knob in
https://github.com/NixOS/nixpkgs/pull/31969, while stating this should
be the default anyway.
I did some thinking in what could break - after this commit, we require
pam_unix to succeed, means we require `getent passwd $username` to
return something.
This is the case for all local users due to the passwd nss module, and
also the case for all modules installing their nss module to
nsswitch.conf - true for ldap (if not explicitly disabled) and sssd.
I'm not so sure about krb5, cc @eqyiel for opinions. Is there some nss
module loaded? Should the pam account module be placed before pam_unix?
We don't drop the `security.pam.services.<name?>.sssdStrictAccess`
option, as it's also used some lines below to tweak error behaviour
inside the pam sssd module itself (by changing it's 'control' field).
This is also required to get admin login for Google OS Login working
(#51566), as their pam_oslogin_admin accounts module takes care of sudo
configuration.
pkgs.owncloud still pointed to owncloud 7.0.15 (from May 13 2016)
Last owncloud server update in nixpkgs was in Jun 2016.
At the same time Nextcloud forked away from it, indicating users
switched over to that.
cc @matej (original maintainer)
* modularity: Document the ability to use non-files in imports
* Update nixos/doc/manual/configuration/modularity.xml
Co-Authored-By: Baughn <svein@google.com>
This fixes some quirks I introduced in previous commits.
1. No need for an extra newline when printing the output of shell commands.
2. 'or die' is what's already used in the NixOS test sources, while
'die unless' has no occurrences.
