Every period, sa1 collects and stores data.
Every 24 hours, sa2 aggregates the previous day's data in to a
report.
Timers and unit configurations were lifted from Fedora's default
units.
A disabled systemd service with a "startAt" attribute, like this:
systemd.services.foo-service = {
enable = false;
startAt = "*-*-* 05:15:00";
...
};
will cause the following errors in the system journal:
systemd[1]: foo-service.timer: Refusing to start, unit to trigger not loaded.
systemd[1]: Failed to start foo-service.timer.
Fix it by not generating the corresponding timer unit when the service
is disabled.
Previously, the value from stdenv.platform.kernelDTB was used. That
doesn't work well if both kinds (DTB and non-DTB) of generations exist
in the system profile.
The shairport-sync service currently fails to start with the error
shairport avahi_entry_group_new failed
This problem seems to have been introduced by
cdd7310a50
After some trial and error I concluded that the attached commit is a minimal
fix.
Currently NixOS creates the swapfile (with the specified size) only if
it doesn't already exist. Changing the swapfile size afterwards will not
have any effect.
This commit changes that so the swapfile will be recreated whenever
swapDevices.*.size is changed (or more precisely, whenever the actual
file size differs from the configured one), allowing both growing and
shrinking the swapfile.
The service unit has "restartIfChanged = false", so we don't have to
worry about the swapfile being in use at the time this code is run (you
have to reboot for swapfile changes).
fallocate doesn't shrink files, use truncate for that. truncate can also
be used to grow files, but it creates "holes" in the file which doesn't
work with swapfiles.
':' is currently used as separator in /boot/grub/state for the list of
devices GRUB should be installed to. The problem is that ':' itself may
appear in a device path:
/dev/disk/by-id/usb-SanDisk_Cruzer_20043512300546C0B317-0:0
With such a path, NixOS will install GRUB *every* time, because it
thinks the configuration differs from the state file (due to the wrong
list split). Fix it by using ',' as separator.
For existing systems with GRUB installed on multiple devices, this
change means that GRUB will be installed one extra time.
- init gnome-software for gnome3 at 3.18.3
- list gnome-software as an "optional package" for gnome3
- enable packagekit service when gnome3 is enabled
- currently pulled in from Git until the next release of PackageKit
has Nix support
- also: add in a service module to start packagekit properly
- nixos service can be enabled via services.packagekit.enable
- packagekit requires nixunstable to build properly
Fixup regression introduced in commit 1bbcd91b2e
("spacefm: sudo and gksu fixes #15758 and license update").
A missing </filename> end tag caused this:
$ nixos-rebuild build
...
options-db.xml:4402: parser error : Opening and ending tag mismatch: filename line 4401 and para
</para><para><emphasis>Type:</emphasis> boolean</para><para><emphasis>Default:</
^
options-db.xml:4406: parser error : Opening and ending tag mismatch: filename line 4401 and listitem
</filename></member></simplelist></listitem></varlistentry><varliste
^
options-db.xml:4406: parser error : Opening and ending tag mismatch: para line 4401 and varlistentry
</filename></member></simplelist></listitem></varlistentry><varliste
^
options-db.xml:28430: parser error : Opening and ending tag mismatch: listitem line 4401 and variablelist
</filename></member></simplelist></listitem></varlistentry></variablelist
^
options-db.xml:28432: parser error : Premature end of data in tag varlistentry line 4401
- RPi3 successfully gets to U-Boot, but then fails to boot the kernel
due to a missing device tree file. This should get added to the 4.8
kernel release once this patch is merged: https://lkml.org/lkml/2016/6/1/841
- RPi2 is not tested, but it should successfully boot the NixOS image.
Instead of showing this output from "nixos-rebuild switch":
warning: not applying GID change of group ‘munin’
warning: not applying UID change of user ‘ntp’
print this:
warning: not applying GID change of group ‘munin’ (95 -> 102)
warning: not applying UID change of user ‘ntp’ (3 -> 179)
This makes it possible for users to take action and fixup the UIDs/GIDs
that NixOS won't touch.
Fixes issue when upgrading from very old NixOS systems that don't have
systemd-escape in $PATH:
$ sudo nixos-rebuild switch
...
building the system configuration...
updating GRUB 2 menu...
Can't exec "systemd-escape": No such file or directory at /nix/var/nix/profiles/system/bin/switch-to-configuration line 264.
Unable to escape /!
Fixes this (line wrapped):
$ gnome-control-center
[... click on the "Color" item ...]
(gnome-control-center:3977): color-cc-panel-WARNING **: \
The name org.freedesktop.ColorManager was not provided by any .service files
With this patch applied, the above warnings are not printed and the GUI
shows some devices that can be managed (my printer and display). Without
this patch the GUI is empty (non-functional).
(cups will also complain in the journal with a similar message when
doing print jobs, without this patch.)
The docstring for the `services.dbus.packages` configuration option only
mentioned one directory, but the implementation actually looked for DBus
config files in four separate places within the target packages. This
commit updates the docstring to reflect the actual implementation
behaviour.
stripHash uses a global variable to communicate it's computation
results, but it's not necessary. You can just pipe to stdout in a
subshell. A function mostly behaves like just another command.
baseHash() also introduces a suffix-stripping capability since it's
something the users of the function tend to use.
...by adding system-config-printer to services.dbus.packages (if
services.printing.enable is true).
Without this patch, trying to add a printer will result in a little dialog
saying "Failed to add new printer" and gnome-control-center will print this to
the terminal (line wrapped):
(gnome-control-center:3546): printers-cc-panel-WARNING **: \
GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: \
The name org.fedoraproject.Config.Printing was not provided by any .service files
system-config-printer supplies the "org.fedoraproject.Config.Printing" dbus
service, thus fixing the problem.
wpa_supplicant fails to start if the wireless interfaces aren't ready yet,
so we need to add a system ordering directive here to start wpa_supplicant
after the interfaces are ready. Note that Requires= is not enough since
it does not imply ordering.
This GID was used to exempt users from Grsecurity's
`/proc` restrictions; we now prefer to rely on
`security.hideProcessInformation`, which uses the `proc` group
for this purpose. That leaves no use for the grsecurity GID.
More generally, having only a single GID to, presumably, serve as the
default for all of grsecurity's GID based exemption/resriction schemes
would be problematic in any event, so if we decide to enable those
grsecurity features in the future, more specific GIDs should be added.
The new module is specifically adapted to the NixOS Grsecurity/PaX
kernel. The module declares the required kernel configurations and
so *should* be somewhat compatible with custom Grsecurity kernels.
The module exposes only a limited number of options, minimising the need
for user intervention beyond enabling the module. For experts,
Grsecurity/PaX behavior may be configured via `boot.kernelParams` and
`boot.kernel.sysctl`.
The module assumes the user knows what she's doing (esp. if she decides
to modify configuration values not directly exposed by the module).
Administration of Grsecurity's role based access control system is yet
to be implemented.
We need to use wrapped modprobe, so that it finds the right
modules. Docker needs modprobe to load overlay kernel module
for example.
This fixes an an error starting docker if the booted system's kernel
version is different from the /run/current-system profile's one.
The update-resolve-conf script from the update-resolv-conf
package is very useful and should work in most of the common
cases, so this adds an option to enable it. The option is
disabled by default for backwards compatibility.
So far the module only allowed for the ccid driver, but there are a lot
of other PCSC driver modules out there, so let's add an option called
"plugins", which boils down to a store path that links together all the
paths specified.
We don't need to create stuff in /var/lib/pcsc anymore, because we
patched pcsclite to allow setting PCSCLITE_HP_DROPDIR.
Another new option is readerConfig, which is especially useful for
non-USB readers that aren't autodetected.
The systemd service now is no longer Type=forking, because we're now
passing the -f (foreground) option to pcscd.
Tested against a YubiKey 4, SCR335 and a REINER SCT USB reader.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @wkennington
This was originally removed in d4d0e449d7.
The intent was not to maintain hydra expression at two places.
Nowadays we have enough devs to maintain this despite copy/pasta.
This should encourage more people to use Hydra, which is a really
great piece of software together with Nix.
Tested a deploy using https://github.com/peti/hydra-tutorial
