This adds a new function in vmTools, called runInWindowsVM, which allows
to run a derivation within a Windows + Cygwin environment.
To use it, you need to pass a Windows ISO and product key, for example:
------------------------------------------------------
vmTools.runInWindowsVM (stdenv.mkDerivation {
name = "hello-from-windows";
windowsImage = {
isoFile = /path/to/windows/image.iso;
productKey = "ABCDE-FGHIJ-KLMNO-PQRST-UVWXY";
};
buildCommand = ''
echo 'Look, I am running inside Windoze!'
uname -a > "$out"
'';
})
------------------------------------------------------
The derivation is then run within a special build process, which roughly
does something like this:
____________
| |
| controller |
|____________|
/ | \
_________ / ____|____ \___________ _______
| | | | | | | |
| install | -> | suspend | -> | suspended | -> | build |
|_________| |_________| |___________| |_______|
There are three steps necessary to produce the builder, which in the end
is just a suspended Windows VM, running Cygwin and OpenSSH.
Those steps are essentially:
* install: Install the base Windows VM with Cygwin and OpenSSH.
* suspend: Run the installed VM and dump the memory into a state file.
* suspended: Resume from the state file and execute the build.
Every build is based on the "suspended" step, which throws away all
changes except to the resulting output store path(s).
All of these steps are based on the controller, which is described in
greater detail in commit 276b72fb93.
The reason I'm merging this right in is because it actually adds a
feature that doesn't break existing functionality and only hooks into
vmTools with a single line.
To the contrary it even duplicates a bit of the code from vmTools, which
might be a good start for refactoring. I didn't do that within that
branch, because it otherwise *could* break existing functionality - VM
tests in particular.
Also, this implementation currently *only* supports Windows XP, because
the implementation was originally made for building a Software where the
majority of the users are using Windows XP and we need to do extensive
testing on that platform.
However, adding support for more recent versions is rather trivial. All
there needs to be done is adding a new unattended installation config in
unattended-image.nix.
Also update 64bit setup.ini and check whether we have a 64 bit stdenv in
order to choose the proper Cygwin version. Otherwise we now have the
setup.ini for 32bit available as well.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
So far, the VMs have always been using the native architecture, because
it was reimporting <nixpkgs> several times. Now, we propagate a list of
packages down to all sub-imports, which not only makes clearer which
dependencies a part actually has, but also will make it easier in case
we want to refactor those parts to use callPackage.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This now isolates the vmTools integration from the bootstrap process and
thus removes our fixed Windows ISO and product key. The latter can now
be provided by an attribute "windowsImage" to runInWindowsVM.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is the last item that was missing to get a fully working
runInWindowsVM function. Apart from checking exit codes, we also now
have preVM/postVM hooks which we can use to write arbitrary constructs
around this architecture, without the need to worry about specific
details.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This function is quite similar to runInLinuxVM, but also ensures that
the builder is run decoupled of the Nix store and using the userland
inside the VM.
We're now picking up the environment variables saved in the previous
commit.
The reason we suppress all errors from the source operation is that it
would emit a ton of errors because we're trying to set read-only
variables.
Also, detecting whether the origBuilder is using the default builder
from the stdenv is currently a bit of a workaround until we have a
specialized pseudo-cross-stdenv someday in the future[TM].
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Later, when we start the actual builder, we're going to restore those
environment variables. We're using "(set; declare -p)", here, because
the former is just printing _all_ environment variables, even those not
supported, and the latter only lists specifically declared variables,
which also encludes exports.
The "declare -p" command also emits those variables in a format similar
to the "export" command.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is mainly to make it easier to quickly change mappings, without
making room for errors such as typos.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cygwin initializes mounts on _every_ login via SSH and doesn't keep them
consistently like on Unix systems, that's why we need to also add fstab
entries for the bind mounts to the store and xchg shares.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We now map all guest accounts to the root user, because in the end the
permissions of the current user boil down to the build user of the Nix
builder of the host. That way it's not possible to gain more permissions
at all and just makes the VM communication a lot easier.
However, setting "writable" to yes instead of "read only" to no doesn't
change anything here, I just found it to be clearer.
Also, we now no longer need to have a "nobody" user.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is done by putting the non-initrd /nix/store into a subdirectory,
which we then chroot to and pass along the SSH command.
Also, we now collect the exit code after the chroot command and power
off the VM thereafter, because the store is no longer shadowed and we
have still access to the busybox inside the initrd.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This should trim down possible dependencies on the base installation and
hereby reduce the need for reinstallation of the damn VM to only changes
that affect the Windows installation and the base Cygwin + OpenSSH
setup.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This now finally introduces our xchg share and also uses it for
exchanging state while suspending a VM. However, accessing the _real_
Nix store still isn't possible because we're shadowing the directory in
the initrd.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Now we're doing this at the point where we're saving the VM state.
Unfortunately it's not quite right, because the controller VM is shut
down _before_ we're saving the state, so the share gets disconnected
despite autodisconnect being deactivated during setup.
We can get around this issue by finally introducing the xchg share,
which is the last item to be implemented before we can merge to master.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Security-wise it's not a big issue because we're still sandboxed, but I
really don't want to write something like \\\\\\\\192.168.0.2\\\\share
in order to set up network shares.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We're going to do this during the suspendedVM phase, so we're able to
more easily change the shares without reinstalling the whole VM.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This could possibly cause flapping whenever qemu is too fast in starting
up. As we are running with the shell's -e flag, the socat check also
ensures that the VDE switch is properly started and causes the whole
build to fail, should it not start up within 20 seconds.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
These stages are in particular:
* Install of the bare Windows VM with Cygwin and shut down.
* Boot up the same VM again without the installation media and dump the
VMs memory to state.gz.
* Resume from state.gz and build whatever we want to build.
Every single stage involves a new "controller", which is more like an
abstraction on the Nix side that constructs the madness described in
276b72fb93.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is kinda stupid to do every little time the file is automatically
regenerated upstream. But let's see how often that happens and whether
it will become a major annoyance or not, and if yes, we might be forced
to include it in our source tree.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This SSH key is specifically only for accessing the installed Cygwin
within the Windows VM, so we only need to expose the private key. Yes,
you heard right, the private key. It's not security-relevant because the
machine is completely read-only, only exposed to the filesystem and
networking is not available.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
At least the largest portion of the installer, because in the end we
don't want the installer to *actually* save the state but only prepare
the base image.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
After quite a lot of fighting against Windows and its various
limitations, this new is the base architecture for installing and
accessing the Windows VM and thus the Cygwin environment inside it:
.------------.
.---> | vde_switch |
| `-[#]----[#]-'
| | |
,' .' `---.___
,' 192.168.0.1 `.
| | 192.168.0.2
,' _____[#]____ |
,' | | ______[#]______
| | Windows VM | | .--' |
| |____________| | | |
| | /|\ | .-| |
| .---------. | | | | | |
.-|-| manager |-' | | | | |
| | `---------' | | | | |
| | | | | | |
| | .-------------. | | Samba |
| | | BOOTSTRAP | | | | | |
| | |-------------| | | | | .------|
| `-| spawn VMs |-+--> | | `---| xchg | <-------.
| |-------------| | | .---^------| |
| | install |---. | `-| nixstore | <----. |
| |-------------| | | `----------| | |
|---| suspend VM | | | | | |
| `------.------' | | Controller VM | | |
| | | |_______________| | |
| .--' | /|\ VirtIO
| | __|__________:____________ | |
| \|/ | | `. | | |
| .------------. | | : | | |
| | REAL BUILD | | | .-------^--------. | | |
| |------------| | `-> | serial console | | | |
`-| revive VM | | `----------------' | | |
|------------| |------------. | | |
| build |-->| /nix/store >>>-----------|-' |
|------------| |------------| | |
| collect |<--| xchg >>>-----------|----'
`-----.------' |------------' |
| | |
\|/ | | | __ ___ | |
| |--| | | (__ -|- |
F I N I S H E D | | | |__| ___) | |
|__________________________|
This might look a bit overwhelming, but let me try to explain:
We're starting at the base derivation ("BOOTSTRAP" above), where we
actually install the Cygwin envirenment. Over there we basically fire up
a vde_switch process and two virtual machines: One is the Windows
machine, the other is a NixOS machine, which serves as some kind of
proxy between the host and the Windows machine.
The reason we're doing this, is because we don't have a lot of options
for sharing files between a stock Windows machine and the host. In
earlier experiments, I've tried to communicate with the Windows guest by
using pipes and OpenSSH, but obviously this wasn't a big speed rush (or
to say it bluntly: It was fucking slow).
Using TCP/IP directly for accessing the guest would have been another
option, but it could lead to possible errors when the port or a range of
ports are in use at the Host system. Also, we would need to punch a hole
into the sandbox of the Nix builder (as it doesn't allow networking),
which in turn will possibly undermine deterministic builds/runs (well,
at least as deterministic as it can be, we're running Windows,
remember?).
So, let's continue: The responsibility of the NixOS (controller) VM is
to just wait until an SSH port becomes available on the Windows VM,
whereas the Windows VM itself is installed using an unattended
installation file provided via a virtual floppy image.
With the installation of the basic Windows OS, we directly install
Cygwin and start up an OpenSSH service.
At this point the bootstrapping is almost finished and as soon as the
port is available, the controller VM sets up Samba shares and makes it
available as drive letters within Windows and as bind mounts (for
example /nix/store) within Cygwin.
Finally we're making a snapshot of the memory of the Windows VM in order
to revive it within a few seconds when we want to build something.
Now, the build process itself is fairly straightforward: Revive VM and
build based on existing store derivations and collect the result _and_
the exit code from the xchg share/directory.
Conclusion: This architecture may sound a bit complicated, but we're
trying to achieve deterministic and reproducable builds and/or test
runs.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This requires recent versions of aqbanking and gwenhywfar:
https://devel.aqbanking.de/trac/aqbanking/ticket/197
It seems as if the developers have changed their version numbering
scheme in 2012 and have only released versions with the "beta" suffix
since then.
Additionally, add @ocharles to the list of maintainers.
I am only building these on Linux environments in Hydra for now, as
that's the only environment I can be a maintainer for.
This reverts commit 32a4081a7f.
After ec985c8ff the apps linked to 2.11 fontconfig run fine on nixos
with older /etc/fonts/, but the other way won't work.
Unfortunately, I see no easy work-around ATM.
Before we used `easy_install` command to handle installation
in one shot, now this is split into two phases:
- buildPhase: python setup.py build
- installPhase: python setup.py install
Each of those commands have the ability to pass extra
parameters through buildPythonPackage parameters as
`setupPyInstallFlags` and `setupPyBuildFlags`.
Phases now correctly execute post/pre hooks.
In configurePhase we inject setuptools dependency before distutils
is imported to apply monkeypatching by setuptools that is needed
for special features to apply.
We don't have to reorder default phases anymore, as test
phase comes after build and that works.
I rewrote offineDistutils into distutils-cfg with a bit cleaner
syntax and ability to specify extraCfg to the config file.
Plone packages are failing and garbas said he will adopt them to
the new functions. The rest of the packages I fixed and these commits
shouldn't break any package (according to my testings) and they introduce
16 new jobs and fix 38 that were broken before.
This is needed to compile the Virtual Box guest additions with the 3.13
kernel (and thus the grsecurity testing kernel).
Signed-off-by: Austin Seipp <aseipp@pobox.com>
- Prepend dbus_libs pkgconfig to pkgconfig path, as otherwise the dbus-daemon pkgconfig wins,
as it has the same name (dbus-1.pc), which doesn't provide all the dbus headers that are needed
- Apply the included patch to obex-data-server which lets it build against current openobex
Add 'keybinder' and 'python-notify' as dependencies. Fixes this:
$ terminator
[...]
Warning: python-keybinder is not installed. This means the hide_window shortcut will be unavailable
[...]
ActivityWatch plugin unavailable: please install python-notify
keybinder is a library for registering global keyboard shortcuts.
keybinder works with GTK-based applications using the X Window System.
https://github.com/engla/keybinder/
* No need to set 'phases', the default works.
* Use shell globbing instead of running 'ls' in a subshell.
* Quote shell variables.
* The project has got a new homepage; the old one points users to the
new one (or the launchpad page)
* Make it available in the channel (meta.platforms = linux)
