Change the default SMTP port to `25`, to better match the default
address `localhost`. This gets rid of some error outputs in the test,
where it fails to connect to localhost:465.
Also, don't enable postfix by default unless it's actually useful to
us.
ChangeLog: https://nextcloud.com/changelog/#latest21
* Packaged 21.0.0, test-deployed it to my personal instance and tested
the most basic functionality (`davfs2`-mount, {card,cal}dav sync, file
management).
* Bumped the default version for unstable/21.05 to `nextcloud21`. Since
`nextcloud20` was added after the release of 20.09 (and thus the
default on 20.09 is still `nextcloud19`), it's now needed to upgrade
across two majors.
This is not a problem though since it's possible to upgrade to v20 on
20.09 already and if not, the module will guard the administrator
through the upgrade with eval warnings as it's the case since 20.03.
* Dropped `nextcloud17` attribute and marked `nextcloud18` as EOL.
The NixOS 21.03 release has been delayed to 21.05. See NixOS/rfcs#80.
There are two instances of 21.03 which have been left as is, since they
are in stateVersion comparisons. This will ensure that existing user
configurations which refer to 21.03 will continue to work.
Important changes:
- The 'isync' compatibility wrapper was removed.
- The Master/Slave configuration keywords where deprecated and should be
replaced with Far/Near. All users should update their configuration
file accordingly. It's a trivial change and the old Master/Slave
keywords will still work for now but result in the following message:
Notice: Master/Slave are deprecated; use Far/Near instead.
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
By default, restic determines the location of the cache based on the XDG
base dir specification, which is `~/.cache/restic` when the environment
variable `$XDG_CACHE_HOME` isn't set.
As restic is executed as root by default, this resulted in the cache being
written to `/root/.cache/restic`, which is not quite right for a system
service and also meant, multiple backup services would use the same cache
directory - potentially causing issues with locking, data corruption,
etc.
The goal was to ensure, restic uses the correct cache location for a
system service - one cache per backup specification, using `/var/cache`
as the base directory for it.
systemd sets the environment variable `$CACHE_DIRECTORY` once
`CacheDirectory=` is defined, but restic doesn't change its behavior
based on the presence of this environment variable.
Instead, the specifier [1] `%C` can be used to point restic explicitly
towards the correct cache location using the `--cache-dir` argument.
Furthermore, the `CacheDirectoryMode=` was set to `0700`, as the default
of `0755` is far too open in this case, as the cache might contain
sensitive data.
[1] https://www.freedesktop.org/software/systemd/man/systemd.unit.html#Specifiers
OSS Emulation is considered incomplete so disabling it by default.
Using user level alsa-oss library (nix-env -iA nixos.alsaOss) over
this kernel module is recommended.
The `platform` field is pointless nesting: it's just stuff that happens
to be defined together, and that should be an implementation detail.
This instead makes `linux-kernel` and `gcc` top level fields in platform
configs. They join `rustc` there [all are optional], which was put there
and not in `platform` in anticipation of a change like this.
`linux-kernel.arch` in particular also becomes `linuxArch`, to match the
other `*Arch`es.
The next step after is this to combine the *specific* machines from
`lib.systems.platforms` with `lib.systems.examples`, keeping just the
"multiplatform" ones for defaulting.
androidenv did not previously write license files, which caused certain
gradle-based Android tools to fail. Restructure androidenv's list of
Android packages into a single repo.json file to prevent duplication
and enable us to extract the EULA texts, which we then hash with
builtins.hashString to produce the license files that Android gradle
tools look for.
Remove includeDocs and lldbVersions, as these have been removed
from the Android package repositories.
Improve documentation and examples.
* Content of `programlisting` shouldn't be indented, otherwise it's
weirdly indented in the output.
* Use `<xref linkend=.../>` in the release notes: then users can
directly go to the option documentation when reading release notes.
* Don't use docbook tags in `mkRemovedOptionModule`: it's only used
during evaluation where docbook isn't rendered.
Since slurm-20.11.0.1 the dbd server requires slurmdbd.conf to be
in mode 600 to protect the database password. This change creates
slurmdbd.conf on-the-fly at service startup and thus avoids that
the database password ends up in the nix store.
It's very surprising that services.tor.client.enable would set
services.privoxy.enable. This violates the principle of least
astonishment, because it's Privoxy that can integrate with Tor, rather
than the other way around.
So this patch moves the Privoxy Tor integration to the Privoxy module,
and it also disables it by default. This change is documented in the
release notes.
Reported-by: V <v@anomalous.eu>
configuration.nix(1) states
users.extraUsers.<name>.createHome
[...] If [...] the home directory already exists but is not
owned by the user, directory owner and group will be changed to
match the user.
i.e. ownership would change only if the user mismatched; the code
however ignores the owner, it is sufficient to enable `createHome`:
if ($u->{createHome}) {
make_path($u->{home}, { mode => 0700 }) if ! -e $u->{home};
chown $u->{uid}, $u->{gid}, $u->{home};
}
Furthermore, permissions are ignored on already existing directories and
therefore may allow others to read private data eventually.
Given that createHome already acts as switch to not only create but
effectively own the home directory, manage permissions in the same
manner to ensure the intended default and cover all primary attributes.
Avoid yet another configuration option to have administrators make a
clear and simple choice between securely managing home directories
and optionally defering management to own code (taking care of custom
location, ownership, mode, extended attributes, etc.).
While here, simplify and thereby fix misleading documentation.
Mailman can now work with MTAs other than Postfix. You'll have to configure
it yourself using the options in `services.mailman.settings.mta`.
This addition is reflected in the release notes for 21.03.
A big jump, but the structure hasn't changed much.
This recipe is still based on a binary release provided by upstream.
(It might be interesting to start doing our own builds at some point,
to split client from server, and/or to create packages for removed
"contribs" such as 'zooInspector'. Upstream intends to further slim
down its release tarballs as most deployments only need specific assets.)
See https://www.redhat.com/sysadmin/fedora-31-control-group-v2 for
details on why this is desirable, and how it impacts containers.
Users that need to keep using the old cgroup hierarchy can re-enable it
by setting `systemd.unifiedCgroupHierarchy` to `false`.
Well-known candidates not supporting that hierarchy, like docker and
hidepid=… will disable it automatically.
Fixes #73800
Note that it made into 2 entries, one about new options in the first section.
Another in the breaking compatibility section due to the openFirewall option
which changes the behavior.
This reverts commit fb6d63f3fd.
I really hope this finally fixes #99236: evaluation on Hydra.
This time I really did check basically the same commit on Hydra:
https://hydra.nixos.org/eval/1618011
Right now I don't have energy to find what exactly is wrong in the
commit, and it doesn't seem important in comparison to nixos-unstable
channel being stuck on a commit over one week old.
Please note that this is only for 21.03 since `nextcloud19` is intended
to be the default for the already feature-frozen 20.09 (the bump itself
is supposed to get backported however).
Conform to RFC 1123 [0], specifically to "2.1 Host Names and Numbers",
which allow starting host name with alphanumerical instead of alphabetical characters.
RFC 1123 updates RFC 952 [1], which is referenced in "man 5 hosts".
[0]: https://tools.ietf.org/html/rfc1123
[1]: https://tools.ietf.org/html/rfc952
Both packages will get EOLed within the lifetime of 20.09. `nextcloud17`
can be removed entirely (the attribute-path is kept however to provide
meaningful errors), however `nextcloud18` must be kept as `insecure` to
make sure that users from `nextcloud17` can properly upgrade to
`nextcloud19` on NixOS 20.09.
This removes the `services.dbus.socketActivated` and
`services.xserver.startDbusSession` options. Instead the user D-Bus
session is always socket activated.
Now allows applying external overlays either in form of
.dts file, literal dts context added to store or precompiled .dtbo.
If overlays are defined, kernel device-trees are compiled with '-@'
so the .dtb files contain symbols which we can reference in our
overlays.
Since `fdtoverlay` doesn't respect `/ compatible` by itself
we query compatible strings of both `dtb` and `dtbo(verlay)`
and apply only if latter is substring of the former.
Also adds support for filtering .dtb files (as there are now nearly 1k
dtbs).
Co-authored-by: georgewhewell <georgerw@gmail.com>
Co-authored-by: Kai Wohlfahrt <kai.wohlfahrt@gmail.com>
Right now the UX for installing NixOS on a headless system is very bad.
To enable sshd without physical steps users have to have either physical
access or need to be very knowledge-able to figure out how to modify the
installation image by hand to put an `sshd.service` symlink in the
right directory in /nix/store. This is in particular a problem on ARM
SBCs (single board computer) but also other hardware where network is
the only meaningful way to access the hardware.
This commit enables sshd by default. This does not give anyone access to
the NixOS installer since by default. There is no user with a non-empty
password or key. It makes it easy however to add ssh keys to the
installation image (usb stick, sd-card on arm boards) by simply mounting
it and adding a keys to `/root/.ssh/authorized_keys`.
Importantly this should not require nix/nixos on the machine that
prepare the installation device and even feasiable on non-linux systems
by using ext4 third party drivers.
Potential new threats: Since this enables sshd by default a
potential bug in openssh could lead to remote code execution. Openssh
has a very good track-record over the last 20 years, which makes it
far more likely that Linux itself would have a remote code execution
vulnerability. It is trusted by millions of servers on many operating
systems to be exposed to the internet by default.
Co-authored-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
readd perl (used in shell scripts), rsync (needed for NixOps) and strace (common debugging tool)
they where previously removed in https://github.com/NixOS/nixpkgs/pull/91213
Co-authored-by: Timo Kaufmann <timokau@zoho.com>
Co-authored-by: 8573 <8573@users.noreply.github.com>
Use StateDirectory to create necessary directories and hardcode some
paths. Also drop file based audit logs, they can be found in the
journal. And add module option deprecation messages.
