Submodules that have a freeform type set behave as if that was the type
of the option itself (for values that don't have an option). Since the
submodules options are shown as separate entries in the manual, it makes
sense to show the freeform type as the submodule type.
For programs that have a lot of (Nix-representable) configuration options,
a simple way to represent this in a NixOS module is to declare an
option of a type like `attrsOf str`, representing a key-value mapping
which then gets generated into a config file. However with such a type,
there's no way to add type checking for only some key values.
On the other end of the spectrum, one can declare a single separate
option for every key value that the program supports, ending up with a module
with potentially 100s of options. This has the benefit that every value
gets type checked, catching mistakes at evaluation time already. However
the disadvantage is that the module becomes big, becomes coupled to the
program version and takes a lot of effort to write and maintain.
Previously there was a middle ground between these two
extremes: Declare an option of a type like `attrsOf str`, but declare
additional separate options for the values you wish to have type
checked, and assign their values to the `attrsOf str` option. While this
works decently, it has the problem of duplicated options, since now both
the additional options and the `attrsOf str` option can be used to set a
key value. This leads to confusion about what should happen if both are
set, which defaults should apply, and more.
Now with this change, a middle ground becomes available that solves above
problems: The module system now supports setting a freeform type, which
gets used for all definitions that don't have an associated option. This
means that you can now declare all options you wish to have type
checked, while for the rest a freeform type like `attrsOf str` can be
used.
This fundamentally changes how the module evaluation internally
handles definitions without an associated option.
Previously the values of these definitions were discarded and only
the names were propagated. This was fine because that's all that's
needed for optionally checking whether all definitions have an
associated option with _module.check.
However with the upcoming change of supporting freeform modules,
we *do* need the values of these.
With this change, the module evaluation cleanly separates definitions
that match an option, and ones that do not.
`toHex` converts the given positive integer to a string of the hexadecimal
representation of that integer. For example:
```
toHex 0 => "0"
toHex 16 => "10"
toHex 250 => "FA"
```
`toBase base i` converts the positive integer `i` to a list of it
digits in the given `base`. For example:
```
toBase 10 123 => [ 1 2 3 ]
toBase 2 6 => [ 1 1 0 ]
toBase 16 250 => [ 15 10 ]
```
The previous hash was too short and caused evaluation-time errors like:
invalid SRI hash 'sha256-AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA='
Additionally, since the fact that this is broken implies that nobody
could have been using it, "SRI" is a bit of a vague and obscure term,
`fakeSriHash` would be somewhat of a mouthful, and the relevant fetcher
parameters are just called `hash`, rename it to `fakeHash`.
This is used in in the manual generation for option identifiers that can
be linked. This, unike what the example describes, doesn't preserve
quotes which is needed for these identifiers to be valid.
This reverts commit 124cccbe3b.
124cccbe3b
broke the build of NixOS manual.
It does not make sense to be as strict as with attributes since we
are not limited by the CLI's inability to handle numbers.
Placeholders should not be quoted either as they are not part of Nix
syntax but a meta-level construct.
fix: Adding libtool to allow darwin compiles
Libtool seems to be required for mongodb to compile on darwin.
fix: Marking MongoDB as broken on aarch64
fix: Adding libtools to the pkg imports
Update mongodb to 4.0.4
Currently, not providing `name` to `cleanSourceWith` will use the name
of the imported directory. However, a common case is for this to be the
top level of some repository. In that case, the name will be the name of
the checkout on the current machine, which is not necessarily
reproducible across different settings, and can lead to e.g. cache
misses in CI.
This is documented in the comment on `cleanSourceWith`, but this does
not stop it being a subtle trap for users.
There are different tradeoffs in each case:
1. If `cleanSourceWith` defaults to `"source"`, then we may end up with a
user not knowing what directory a source store path corresponds to.
However, it being called "unnamed" may give them a clue that there is a
way for them to name it, and lead them to the definition of the
function, which has a clear `name` parameter.
2. If `cleanSoureWith` defaults to the directory name, then a user may face
occasional loss of caching, which is hard to notice, and hard to track
down. Tracking it down likely requires use of more advanced tools like
`nix-diff`, and reading the source of a lot of nix code.
I think the downside of the status quo is worse.
This is really another iteration of
https://github.com/NixOS/nix/issues/1305: that led to adding the `name`
argument in the first place, this just makes us use a better default
`name`.
The _module option is added as an internal option set, and it messes up
the results of module evaluations, requiring people to manually filter
_modules out.
If people depend on this, they can still use config._module from inside
the modules, exposing _module as an explicitly declared user option. Or
alternatively with the _module attribute now returned by evalModules.
newlib is the default for most tools when no kernel is provided. Other
exist, but this seems like a safe default.
(cherry picked from commit 8009c20711)
This helps with troubleshooting exceptions in config values, which were hard
to track down for options with many definitions.
The trace will look like:
error: while evaluating the attribute 'config.foo' at undefined position:
[...]
while evaluating the option `foo':
[...]
while evaluating definitions from `/home/user/mymod.nix':
while evaluating 'dischargeProperties' at /home/user/nixpkgs/lib/modules.nix:464:25, called from /home/user/nixpkgs/lib/modules.nix:392:137:
while evaluating the attribute 'value' at /home/user/nixpkgs/lib/modules.nix:277:44:
Value error!
where the `/home/user/mymod.nix` module is
{ lib, ... }: {
options.foo = lib.mkOption {
type = lib.types.lines;
};
config.foo = builtins.throw "Value error!";
}
In 87a19e9048 I merged staging-next into master using the GitHub gui as intended.
In ac241fb7a5 I merged master into staging-next for the next staging cycle, however, I accidentally pushed it to master.
Thinking this may cause trouble, I reverted it in 0be87c7979. This was however wrong, as it "removed" master.
This reverts commit 0be87c7979.
I merged master into staging-next but accidentally pushed it to master.
This should get us back to 87a19e9048.
This reverts commit ac241fb7a5, reversing
changes made to 76a439239e.
Let’s call them by what they are, option names.
`generators.mkValueStringDefault` is a better value string renderer
than plain `toString`.
Also add docs to all options.
The semantic difference between `encode` and `to` is not apparent.
Users are likely to confuse both functions (which leads to unexpected
error messages about the wrong types). Like in `generators.nix`, all
functions should be prefixed by `to`.
Furthermore, converting to a string depends on the target context. In
this case, it’s a POSIX shell, so we should name it that (compare
`escapeShellArg` in `strings.nix`).
We can later add versions that escape for embedding in e.g. python
scripts or similar.
lib/cli is very similar to generators, so it should follow largely the
same interface. Similar to how generators isn’t exported, we should
also namespace cli by default (plus “cli” is only three characters to
type).
Before c9214c394b and
9d396d2e42 if .git is symlink the version
would gracefully default to no git revision. With those changes an
exception is thrown instead.
This introduces a new function `pathIsGitRepo` that checks if
`commitIdFromGitRepo` fails without error so we don't have to
reimplement this logic again and can fail gracefully.
Not all modules use name attribute as the name of the submodule, for example,
environment.etc uses target. We will need to maintain a list of exceptions.
lib.commitIdFromGitRepo now resolves the refs from the
parent repository in case the supplied path is a file
containing the path to said repository. this adds support
for git-worktree and things alike. see gitrepository-layout(5).
this also:
- adds a new boolean function lib.pathIsRegularFile to
check whether a path is a regular file
- patches lib.revisionWithDefault and
the revision and versionSuffix attributes in
config.system.nixos in order to support git-worktrees
The standard attrsOf is strict in its *values*, meaning it's impossible to
access only one attribute value without evaluating all others as well.
lazyAttrsOf is a version that doesn't have that problem, at the expense
of conditional definitions not properly working anymore.
Without this change, accessing `mergedValue` from `mergeDefinitions` in
case there are no definitions will throw an error like
error: evaluation aborted with the following error message: 'This case should never happen.'
This change makes it throw the appropriate error
error: The option `foo' is used but not defined.
This is fully backwards compatible.
Fix the broken test in https://github.com/NixOS/nixpkgs/pull/77416
Apparently hydra uses `nix-build lib/tests/release.nix` to run all
tests, where IFD isn't allowed. Fortunately we can get around this with
builtins.toFile, which doesn't require IFD, but still can test the
properties we want.
This fixes imports from the store not being possible, which was caused by
https://github.com/NixOS/nixpkgs/pull/76857
E.g. such a case:
imports = [ "${home-manager}/nixos" ];
With this change, disabledModules applies recursively, meaning if you
have a module "foo.nix" with
imports = [ ./bar.nix ];
then setting
disabledModules = [ "foo.nix" ];
will disable both "foo.nix" and "bar.nix", whereas previously only
"foo.nix" would be disabled.
This change along with https://github.com/NixOS/nixpkgs/pull/61570 allows
modules to be fully disabled even when they have some `mkRenamedOption`
imports.
Previously when this function was called without a value coercible to a
string it would throw an error instead of returning false. Now it does.
As a result this now allows the use of a type like `either path attrs`
without it erroring out when a definition is an attribute set.
The warning about there not being a isPath primop was removed because
this is not the case anymore, there is builtins.isPath. But also there
always was `builtins.typeOf x == "path"` that could've been used
instead. However the path type now stands for more than just path types,
but absolute paths in general.
