- added package option to specify which version of redmine
- added themes option back in to allow specifying redmine themes
- added plugins option back in to allow specifying redmine plugins
- added database.socket option to allow mysql unix socket authentication
- added port option to allow specifying the port rails runs on
- cleaned up Gemfile so it is much less hacky
- switched to ruby version 2.4 by default as suggested by documentation http://www.redmine.org/projects/redmine/wiki/redmineinstall#Installing-Redmine
- fixed an annoyance (bug) in the service causing recursive symlinks
- fixed ownership bug on log files generated by redmine
- updates reflecting renames in nixos options
- added a nixos test
Previously you either had to set the setuid bit yourself or workaround
`isSystemUser = true` (for a loginable shell) to access the weechat
screen.
`programs.screen` shouldn't do this by default to avoid taking too much
assumptions about the setup, however `services.weechat` explicitly
requires tihs.
See #45728
environment.sessionVariables cannot refer to the values of env vars,
and as a result this has caused problems in a variety of scenarios.
One use for these is that they're injected into /etc/profile,
elewhere these are used to populate an 'envfile' for pam
(`pam 5 pam_env.conf`) which mentions use of HOME being
potentially problematic.
Anyway if the goal is to make things easier for users,
simply do the NIX_PATH modification as extraInit.
This fixes the annoying problems generated by the current approach
(#40165 and others) while hopefully serving the original goal.
One way to check if things are borked is to try:
$ sudo env | grep NIX_PATH
Which (before this change) prints NIX_PATH variable with
an unexpanded $HOME in the value.
-------
This does mean the following won't contain user channels for 'will':
$ sudo -u will nix-instantiate --eval -E builtins.nixPath
However AFAICT currently they won't be present either,
due to unescaped $HOME. Unsure if similar situation for other users
of sessionVariables (not sudo) work with current situation
(if they exist they will regress after this change AFAIK).
Introduced by 0f3b89bbed.
If services.nixosManual.showManual is enabled and
documentation.nixos.enable is not, there is no
config.system.build.manual available, so evaluation fails. For example
this is the case for the installer tests.
There is however an assertion which should catch exactly this, but it
isn't thrown because the usage of config.system.build.manual is
evaluated earlier than the assertions.
So I split the assertion off into a separate mkIf to make sure it is
shown appropriately and also fixed the installation-device profile to
enable documentation.nixos.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @oxij
This reverts commit 67c8c49177.
'nix run nixos.firefox' is *not* supposed to work - the Nix 2.x
interface attempts to standardize on nixpkgs.*, to get rid of the
nixos/nixpkgs confusion that existed with the channels interface. So
let's not bring that confusion back.
Because when I see "config.system.build.manual.manual" after I forgot
what it means I ask "Why do I need that second `.manual` there again?".
Doesn't happen with `config.system.build.manual.manualHTML`.
This adds several improvements the previously introduced
`services.weechat` module:
* Dropped `services.weechat.init` as the initialization script can now
be done on package-level since 2af41719bc using the `configure`
function.
* Added `sessionName` option to explicitly configure a name for the
`screen` session (by default: weechat-screen).
* Added `binary` option to configure the binary name (e.g.
`weechat-headless`).
* Added docs regarding `screen` session and `weechat.service`.
This fixes a regression introduced in commit
700e21d6da
nix needs ssh on path for the SSH substituter functionality,
not only the distributed builds functionality.
Signed-off-by: Niklas Hambüchen <mail@nh2.me>
This is the semantics as understood by `xdg-open`. Using these semantics
on a non-colon-separated variable works because it acts as if it was a
one element long list.
This fixes an issue where it would try to exec
`google-chrome-beta:google-chrome:chromium:firefox` on a system
configured with these semantics in mind.
This prevents issues when gitea adds new locales etc. And if they
change locale values in future versions. Or if you rollback to a
previous version of gitea it might be a good idea to use the previous
locale files.
Broke evaluation of the nixos options.
The option `services.dysnomia' defined in `.../nixos/modules/rename.nix' does not exist.
This reverts commit 5c897b4eff.
It seems like Gitlab doesn't pick up GITLAB_UPLOADS_PATH. The internal uploads
folder is already symlinked to /run/gitlab/uploads by the gitlab package. Here
we symlink this further to ${statePath}/uploads, since /run is (usually) a tmpfs.
This reverts commit 095fe5b43d.
Pointless renames considered harmful. All they do is force people to
spend extra work updating their configs for no benefit, and hindering
the ability to switch between unstable and stable versions of NixOS.
Like, what was the value of having the "nixos." there? I mean, by
definition anything in a NixOS module has something to do with NixOS...
The `.service` file defining the `systemd` unit for `autorandr.service`
which is bundled with the package itself uses `--default default` in the
`ExecStart` section. This can be an issue when having multiple layouts
(e.g. `default` as workstation layout I mostly work on and `mobile` when
I go somewhere else).
When the service gets restarted and `--default` can't be applied,
however the current layout can't be detected (e.g. when working with an
unknown beamer) the service silently fails with a message like this:
```
Jun 22 18:44:46 hauptshuhle autorandr[3168]: /nix/store/h83b72ffm68nm8fyjnppljchp456a94r-xrandr-1.5.0/bin/xrandr: ca>
Jun 22 18:44:46 hauptshuhle autorandr[3168]: Failed to apply profile 'default' (line 718):
Jun 22 18:44:46 hauptshuhle autorandr[3168]: Command failed: /nix/store/h83b72ffm68nm8fyjnppljchp456a94r-xrandr-1.>
```
As discussed in the IRC (see https://botbot.me/freenode/nixos/2018-07-05/?msg=101791455&page=6)
it's a bad long-term solution in terms of maintenance to manually patch
the service file bundled with the derivation, instead the service shall
be configured declaratively. Additionally this makes possible overrides
from the user-space way easier.
The `udev` rule (in `$out/etc/udev/rules.d`) won't' be affected, it
simply runs `systemctl start autorandr.service` when e.g. a new display
is added, so now `udev` communicates with the NixOS systemd unit.
The hooks directory contains now one level deep subdirectories which
need to be updated as well.
If you use gitea via ssh, ~/.ssh/authorized_keys also needs to be
updated because of the hardcoded path to gitea in the "command" option.
Ideally I'd like the whole `nixos`/`nixpkgs` channel distinction to disappear, but this is a step along that path. After a while being in this state, we can stop creating the magic `nixpkgs -> .` symlink inside our `nixos` channel tarballs and simplify that whole mess a bit.
If docker is enabled, start mesos-slave.service after docker.service
to avoid a race condition that could result in mesos-slave to fail
with "Failed to create docker: Timed out getting docker version"
The following changes have been applied:
- the property `http.headers.X-Content-Type-Options` must a list of
strings rather than a serialized list
- instead of `/etc/docker/registry/config.yml` the configuration will be
written with `pkgs.writeText` and the store path will be used to run
the registry. This reduces the risk of possible impurities by relying
on the Nix store only.
- cleaned up the property paths to easy readability and reduce the
verbosity.
- enhanced the testcase to ensure that digests can be deleted as well
- the `services.docker-registry.extraConfig` object will be merged with
`registryConfig`
/cc @ironpinguin
* checks using package providing the nix-daemon that we'll be using
* made optional (unlike some other config checks) "just in case":
since this requires running the new Nix on the builder, this
won't work in a few (AFAIK very uncommon) situations such as
cross-compiling NixOS or using `include` directives in nix.conf
This does rely on Nix2 but not by the builder.
Since we only offer Nix2+ in-tree this should be fine,
and may otherwise be required anyway.
HA doesn't mind the configuration being JSON instead of YAML but since YAML is
the official language, use that as it allows users to easily exchange config
data with other parties in the community.
Additionally, some settings based on NixOS configuation is set via defaultConfig
which is then merged with the user provided configration.
For now that just means http port and time zone but others can easily be added.
- `localSystem` is added, it strictly supercedes system
- `crossSystem`'s description mentions `localSystem` (and vice versa).
- No more weird special casing I don't even understand
TEMP
service-runner had a backwards incompatible update, and parsoid 0.9.0
doesn't work with current stable MediaWiki. Instead use as a source
a repository with 0.8.0 and pinned service-runner version.
Without `ROOT_PATH` set, `gogs serv` tries to open logs in writing in
its store directory. This blocks cloning or pushing over ssh, and
results in a gogs internal error.
The working directory needs the x flag, otherwise executors (e.g. sparks executor) are unable to cd into their sandbox and create e.g. temporary files.
Using gitea over ssh had two isses:
1. No shell was set for the user
2. Gitea tried to write logs to
/nix/store/x83q12kyd9gw1pay036dxz2dq0apf17h-gitea-1.3.2-bin/log when
serving the ssh usage.
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):
pkgs/development/libraries/epoxy/default.nix
pkgs/development/libraries/gtk+/3.x.nix
pkgs/development/python-modules/asgiref/default.nix
pkgs/development/python-modules/daphne/default.nix
pkgs/os-specific/linux/systemd/default.nix
* The environment variables NIX_CONF_DIR, NIX_BUILD_HOOK and
NIX_REMOTE are no longer needed.
* A /bin/sh (from busybox) is provided by default in sandboxes.
* Various options were renamed.
This allows to configure additional configuration files for Synapse. This way
secrets can be kept in a secure place on the file system without a need to go
through the Nix store.
This makes the commonHook option work also for (read-only) Nix store
paths. Currently it fails on the second activation, because the
destination is read-only.
If neither database.password or database.passwordFile were provided,
it would try and fail to coerce null to a string.
This fixes the situation where there is no password for the database.
Resolves #27950
It doesn't look good when the initial admin user is named
"<hash>-gitolite-admin" and the key stored as
"<hash>-gitolite-admin.pub". Instead, make it simply "gitolite-admin"
and "gitolite-admin.pub".
Exhibitor tests the auto-manage-instances config value to see if it's a
non-zero integer, rather than a true/false string, which was getting
put into the config before. This now causes autoManageInstances to
behave correctly.
The previous package didn't build properly due to a bug in the build
script, and the nixos module didn't evaluate due to missing descriptions
in the options. This fixes both issues.
It also adds missing command-line options that weren't able to be set
and properly converts bools to the strings exhibitor expects.
The helper tool had a very early check whether the automatically created
CA key/cert are available and thus it would abort if the key was
unavailable even though we don't need or even want to have the CA key.
Unfortunately our NixOS test didn't catch this, because it was just
switching from a configuration with an automatically created CA to a
manual configuration without deleting the generated keys and certs.
This is done now in the tests and it's also fixed in the helper tool.
Reported-by: @jpotier
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This change fixes two major issues:
1. If you don't use SIGQUIT to stop Plex it will corrupt its own
database :(
2. Newer versions of Plex keep metadata in the
`com.plexapp.plugins.library.db` database. This is the file that
we copy into `/var/lib/plex/.skeleton`. If we copy the empty
database on top of this one the user will lose their entire
library metadata. This change skips the copy if the file
already exists.
The implicit behavior of pulling it out of the classpath seemed not
to work properly and could be thrown off by other things on the
classpath also providing the properties file. This guarantees that
our settings stick.
This is deliberate because using the taskd binary to configure
Taskserver has a good chance of messing up permissions.
The nixos-taskserver tool now can manage even manual configurations, so
there really is no need anymore to expose the taskd binary.
If people still want to use the taskd binary at their own risk they can
still add taskserver to systemPackages themselves.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Putting an include directive in the configuration file referencing a
store path with the real configuration file has the disavantage that
once we change the real configuration file the store path is also a
different one.
So we would have to replace that include directive with the new
configuration file, which is very much error-prone, because whenever
taskd modifies the configuration file on its own it generates a new one
with *only* the key/value options and without any include directives.
Another problem is that we only added the include directive on the first
initalization, so whenever there is *any* configuration change, it won't
affect anything.
We're now passing all the configuration options via command line,
because taskd treats everything in the form of --<name>=<value> to be a
configuration directive.
This also has the effect that we now no longer have extraConfig, because
configuration isn't a file anymore.
Instead we now have an attribute set that is mapped down to
configuration options.
Unfortunately this isn't so easy with the way taskd is configured,
because there is an option called "server" and also other options like
"server.cert", "server.key" and so on, which do not map very well to
attribute sets.
So we have an exception for the "server" option, which is now called
"server.listen", because it specifies the listening address.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Fixes: #22705
The helper tool so far was only intended for use in automatic PKI
handling, but it also is very useful if you have an existing CA.
One of the main advantages is that you don't need to specify the data
directory anymore and the right permissions are also handled as well.
Another advantage is that we now have an uniform management tool for
both automatic and manual config, so the documentation in the NixOS
manual now applies to the manual PKI config as well.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The error message displays that a specific user doesn't exist in an
organisation, but uses the User object's name attribute to show which
user it was.
This is basically a very stupid chicken and egg problem and easily fixed
by using the user name provided on the command line.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The GeoIP databases from MaxMind have no stable URLs and change every
month (or so). Our current method of packaging these database in Nix and
playing catch-up with ever-changing file hashes is a bad idea. For
instance, it makes it impossible to realize old NixOS configurations.
This patch adds a NixOS service that periodically updates the GeoIP
databases in /var/lib/geoip-databases. Moving NixOS modules over can be
done in later patches.
I tried adding MD5 check, but not all databases have them, so i skipped
it. We are downloading over HTTPS though, it should be good. I also
tried adding zip support, but the first zip file I extracted had a
different filename inside than the archive name, which breaks an
assumption in this service, so I skipped that too.
Changes v9 -> v10:
- Pass "--max-time" to curl to set upper bound on downloads (ensures
no indefinite hanging if there's problem with networking).
Timeout for network connectivity check: 60s.
Timeout for geoip database (each): 15m.
Changes v8 -> v9:
- Mention the random timer delay in the documentation for the
'interval' option.
Changes v7 -> v8:
- Add "RemainAfterExit=true" for the setup service, so it won't be
restarted needlessly. (Thanks @danbst!)
Changes v6 -> v7:
- Add --skip-existing flag to geoip-updater, which skips updating
existing database files. Pass that flag when we run the service on
boot (and on any NixOS configuration change).
(IMHO, this is somewhat a workaround for systemd persistent timers
not being triggered immediately when a timer has never expired
before. But it does have the nice side effect of ensuring that the
installed databases always correspond to the configured ones, since
the service is now always run after configuration changes.)
Changes v5 -> v6:
- Update database files atomically (per DB)
- If a database is removed from the configuration, it'll be removed
from /var/lib/geoip-databases too (on next run).
- Add NixOS module assertion so that if user inputs non- .gz or .xz
file there will be a build time error instead of runtime.
- Run updater as user "nobody" instead of "root".
- Rename NixOS service from "geoip-databases" to "geoip-updater".
- Drop RemainAfterExit, or else the timer won't trigger the unit.
- Bring back "curl --fail", or else we won't catch and log curl
failures.
Changes v4 -> v5:
- Add "GeoLite2-City.mmdb.gz" to default database list.
Changes v3 -> v4:
- Remove unneeded geoip-updater-setup.service after adding
'wantedBy = [ "multi-user.target" ]' directly to
geoip-updater.service
- Drop unneeded "Service" name from service descriptions.
Changes v2 -> v3:
- Network may be down when starting from a cold boot, so try a few
times. Possibly, if using systemd-networkd, it'll pass on the first
try. But with default DHCP on NixOS, the service is started before
hostnames can be resolved and thus we need a few extra seconds.
- Add error handling and mark service as failed if fatal error.
- Add proper syslog log levels.
- Add RandomizedDelaySec=3600 to the timer to not put high load on the
MaxMind servers. Suggested by @Mic92.
- Set RemainAfterExit on geoip-updater.service instead of
geoip-updater-setup.service. (The latter is only a proxy that pulls
in the former service).
Changes v1 -> v2:
From Данило Глинський (Danylo Hlynskyi) <abcz2.uprola@gmail.com>:
nixos/geoip-databases: add `databases` option and fix initial setup
There were two great issues when using this service:
- When you just enable service, databases aren't downloaded, they are
downloaded when timer triggers. Fixed this with automatic download on
first system activation.
- When there is no internet, updater outputs nothing to logs, which is
IMO misbehavior. Fixed this with removing `--fail` option, better be
explicit here.
Pushing to gogs only works if the `gogs` user's shell is `bash`. For error and
solution, refer to [this SO thread](http://stackoverflow.com/a/22315659)
A default of 0 means that if you deploy two NixOS boxes with the default
configuration, the second will fail because the brokerId was already in
use. Using -1 instead tells it to pick one automatically at first start.
perlPackages.TextWrapI18N: init at 0.06
perlPackages.Po4a: init at 0.47
jade: init at 1.2.1
ding-libs: init at 0.6.0
Switch nscd to no-caching mode if SSSD is enabled.
abbradar: disable jade parallel building.
Closes #21150
Using the example before this commit resulted in the following error:
```
error: value is a string while a list was expected, at /nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/nixos/modules/services/misc/nix-daemon.nix:349:37
```
The matrix-synapse user has `createHome = true;` which runs before the
`preStart` script, so the home directory will always exist and the block
will never execute.
Also don't include default path to keys in the configuration file,
because synapse will choke if it tries to open them before they
exist (even with `--generate-keys`).
`startAt = ""` as in `startAt = optionalString false ...` results
in an invalid timer unit (due to "" being promoted to a singleton
list and not filtered out).
Ref: c9941c4b5e
