-`cryptsetup` has been upgraded from 2.6.1 to 2.7.0. Cryptsetup is a critical component enabling LUKS-based (but not only) full disk encryption.
Take the time to review [the release notes](https://gitlab.com/cryptsetup/cryptsetup/-/raw/v2.7.0/docs/v2.7.0-ReleaseNotes).
One of the highlight is that it is now possible to use hardware OPAL-based encryption of your disk with `cryptsetup`, it has a lot of caveats, see the above notes for the full details.
-`screen`'s module has been cleaned, and will now require you to set `programs.screen.enable` in order to populate `screenrc` and add the program to the environment.
- On flake-based NixOS configurations using `nixpkgs.lib.nixosSystem`, NixOS will automatically set `NIX_PATH` and the system-wide flake registry (`/etc/nix/registry.json`) to point `<nixpkgs>` and the unqualified flake path `nixpkgs` to the version of nixpkgs used to build the system.
This makes `nix run nixpkgs#hello` and `nix-build '<nixpkgs>' -A hello` work out of the box with no added configuration, reusing dependencies already on the system.
This may be undesirable if nix commands are not going to be run on the built system since it adds nixpkgs to the system closure. For such closure-size-constrained non-interactive systems, this setting should be disabled.
To disable this, set [nixpkgs.flake.setNixPath](#opt-nixpkgs.flake.setNixPath) and [nixpkgs.flake.setFlakeRegistry](#opt-nixpkgs.flake.setFlakeRegistry) to false.
- Julia environments can now be built with arbitrary packages from the ecosystem using the `.withPackages` function. For example: `julia.withPackages ["Plots"]`.
- The default dbus implementation has transitioned to dbus-broker from the classic dbus daemon for better performance and reliability. Users can revert to the classic dbus daemon by setting `services.dbus.implementation = "dbus";`. For detailed deviations, refer to [dbus-broker's deviations page](https://github.com/bus1/dbus-broker/wiki/Deviations).
- A new option `virtualisation.containers.cdi` was added. It contains `static` and `dynamic` attributes (corresponding to `/etc/cdi` and `/run/cdi` respectively) to configure the Container Device Interface (CDI).
-`virtualisation.docker.enableNvidia` and `virtualisation.podman.enableNvidia` options are deprecated. `virtualisation.containers.cdi.dynamic.nvidia.enable` should be used instead. This option will expose GPUs on containers with the `--device` CLI option. This is supported by Docker 25, Podman 3.2.0 and Singularity 4. Any container runtime that supports the CDI specification will take advantage of this feature.
- The initial Incus LTS release (v6.0.x) is now available through `virtualisation.incus` as the default. Users who wish to continue using the non-LTS release will need to set `virtualisation.incus.package = pkgs.incus`. Stable release users are encouraged to stay on the LTS release as non-LTS releases will by default not be backported.
- Canonical LXD has been upgraded to v5.21.x, an LTS release. The LTS release is now the only supported LXD release. Users are encouraged to [migrate to Incus](https://linuxcontainers.org/incus/docs/main/howto/server_migrate_lxd/) for better support on NixOS.
- Plasma 6 is now available and can be installed with `services.xserver.desktopManager.plasma6.enable = true;`. Plasma 5 will likely be deprecated in the next release (24.11). Note that Plasma 6 runs as Wayland by default, and the X11 session needs to be explicitly selected if necessary.
- The desktop mode of Lomiri (formerly known as Unity8), using Mir 2.x to function as a Wayland compositor, is now available and can be installed with `services.desktopManager.lomiri.enable = true`. Note that some core applications, services and indicators have yet to be packaged, and some functions may remain incomplete, but the base experience should be there.
- [Handheld Daemon](https://github.com/hhd-dev/hhd), support for gaming handhelds like the Legion Go, ROG Ally, and GPD Win. Available as [services.handheld-daemon](#opt-services.handheld-daemon.enable).
- [ryzen-monitor-ng](https://github.com/mann1x/ryzen_monitor_ng), a desktop AMD CPU power monitor and controller, similar to Ryzen Master but for Linux. Available as [programs.ryzen-monitor-ng](#opt-programs.ryzen-monitor-ng.enable)
- [ryzen-smu](https://gitlab.com/leogx9r/ryzen_smu), Linux kernel driver to expose the SMU (System Management Unit) for certain AMD Ryzen Processors. Includes the userspace program `monitor_cpu`. Available at [hardward.cpu.amd.ryzen-smu](#opt-hardware.cpu.amd.ryzen-smu.enable)
- systemd's gateway, upload, and remote services, which provides ways of sending journals across the network. Enable using [services.journald.gateway](#opt-services.journald.gateway.enable), [services.journald.upload](#opt-services.journald.upload.enable), and [services.journald.remote](#opt-services.journald.remote.enable).
- [dnsproxy](https://github.com/AdguardTeam/dnsproxy), a simple DNS proxy with DoH, DoT, DoQ and DNSCrypt support. Available as [services.dnsproxy](#opt-services.dnsproxy.enable).
- [rspamd-trainer](https://gitlab.com/onlime/rspamd-trainer), script triggered by a helper which reads mails from a specific mail inbox and feeds them into rspamd for spam/ham training.
- [Mihomo](https://github.com/MetaCubeX/mihomo/tree/Alpha), a rule-based proxy in Go. Available as [services.mihomo.enable](#opt-services.mihomo.enable).
- [hebbot](https://github.com/haecker-felix/hebbot), a Matrix bot to generate "This Week in X" like blog posts. Available as [services.hebbot](#opt-services.hebbot.enable).
- [db-rest](https://github.com/derhuerst/db-rest), a wrapper around Deutsche Bahn's internal API for public transport data. Available as [services.db-rest](#opt-services.db-rest.enable).
- [Anki Sync Server](https://docs.ankiweb.net/sync-server.html), the official sync server built into recent versions of Anki. Available as [services.anki-sync-server](#opt-services.anki-sync-server.enable).
The pre-existing [services.ankisyncd](#opt-services.ankisyncd.enable) has been marked deprecated and will be dropped after 24.05 due to lack of maintenance of the anki-sync-server softwares.
- [mautrix-meta](https://github.com/mautrix/meta), a Matrix <-> Facebook and Matrix <-> Instagram hybrid puppeting/relaybot bridge. Available as services.mautrix-meta
- [transfer-sh](https://github.com/dutchcoders/transfer.sh), a tool that supports easy and fast file sharing from the command-line. Available as [services.transfer-sh](#opt-services.transfer-sh.enable).
- [FCast Receiver](https://fcast.org), an open-source alternative to Chromecast and AirPlay. Available as [programs.fcast-receiver](#opt-programs.fcast-receiver.enable).
- [Suwayomi Server](https://github.com/Suwayomi/Suwayomi-Server), a free and open source manga reader server that runs extensions built for [Tachiyomi](https://tachiyomi.org). Available as [services.suwayomi-server](#opt-services.suwayomi-server.enable).
- [ping_exporter](https://github.com/czerwonk/ping_exporter), a Prometheus exporter for ICMP echo requests. Available as [services.prometheus.exporters.ping](#opt-services.prometheus.exporters.ping.enable).
- [Prometheus DNSSEC Exporter](https://github.com/chrj/prometheus-dnssec-exporter), check for validity and expiration in DNSSEC signatures and expose metrics for Prometheus. Available as [services.prometheus.exporters.dnssec](#opt-services.prometheus.exporters.dnssec.enable).
- [TigerBeetle](https://tigerbeetle.com/), a distributed financial accounting database designed for mission critical safety and performance. Available as [services.tigerbeetle](#opt-services.tigerbeetle.enable).
- [microsocks](https://github.com/rofl0r/microsocks), a tiny, portable SOCKS5 server with very moderate resource usage. Available as [services.microsocks]($opt-services-microsocks.enable).
- [Clevis](https://github.com/latchset/clevis), a pluggable framework for automated decryption, used to unlock encrypted devices in initrd. Available as [boot.initrd.clevis.enable](#opt-boot.initrd.clevis.enable).
- [fritz-exporter](https://github.com/pdreker/fritz_exporter), a Prometheus exporter for extracting metrics from [FRITZ!](https://avm.de/produkte/) devices. Available as [services.prometheus.exporters.fritz](#opt-services.prometheus.exporters.fritz.enable).
- [armagetronad](https://wiki.armagetronad.org), a mid-2000s 3D lightcycle game widely played at iD Tech Camps. You can define multiple servers using `services.armagetronad.<server>.enable`.
- [wyoming-satellite](https://github.com/rhasspy/wyoming-satellite), a voice assistant satellite for Home Assistant using the Wyoming protocol. Available as [services.wyoming.satellite]($opt-services.wyoming.satellite.enable).
- [TuxClocker](https://github.com/Lurkki14/tuxclocker), a hardware control and monitoring program. Available as [programs.tuxclocker](#opt-programs.tuxclocker.enable).
- binfmt option for AppImage-run to support running [AppImage](https://appimage.org/)'s seamlessly on NixOS.. Available as [programs.appimage.binfmt](#opt-programs.appimage.binfmt).
- [RustDesk](https://rustdesk.com), a full-featured open source remote control alternative for self-hosting and security with minimal configuration. Alternative to TeamViewer.
- [davis](https://github.com/tchapi/davis), a simple CardDav and CalDav server inspired by Baïkal. Available as [services.davis]($opt-services-davis.enable).
- [systemd-lock-handler](https://git.sr.ht/~whynothugo/systemd-lock-handler/), a bridge between logind D-Bus events and systemd targets. Available as [services.systemd-lock-handler.enable](#opt-services.systemd-lock-handler.enable).
- [Mealie](https://nightly.mealie.io/), a self-hosted recipe manager and meal planner with a RestAPI backend and a reactive frontend application built in NuxtJS for a pleasant user experience for the whole family. Available as [services.mealie](#opt-services.mealie.enable)
- [Uni-Sync](https://github.com/EightB1ts/uni-sync), a synchronization tool for Lian Li Uni Controllers. Available as [hardware.uni-sync](#opt-hardware.uni-sync.enable)
- [prometheus-nats-exporter](https://github.com/nats-io/prometheus-nats-exporter), a Prometheus exporter for NATS. Available as [services.prometheus.exporters.nats](#opt-services.prometheus.exporters.nats.enable).
-`k3s`: was updated to version [v1.29](https://github.com/k3s-io/k3s/releases/tag/v1.29.1%2Bk3s2), all previous versions (k3s_1_26, k3s_1_27, k3s_1_28) will be removed. See [changelog and upgrade notes](https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG/CHANGELOG-1.29.md#urgent-upgrade-notes) for more information.
-`himalaya` was updated to `v1.0.0-beta.4`, which introduces breaking changes. Check out the [release note](https://github.com/soywod/himalaya/releases/tag/v1.0.0-beta.4) for details.
- The `power.ups` module now generates `upsd.conf`, `upsd.users` and `upsmon.conf` automatically from a set of new configuration options. This breaks compatibility with existing `power.ups` setups where these files were created manually. Back up these files before upgrading NixOS.
-`programs.nix-ld.libraries` no longer sets `baseLibraries` via the option's default but in config and now merges any additional libraries with the default ones.
This means that `lib.mkForce` must be used to clear the list of default libraries.
-`cudaPackages.autoAddOpenGLRunpathHook` and `cudaPackages.autoAddDriverRunpath` have been deprecated for `pkgs.autoAddDriverRunpath`. Functionality has not changed, but the setuphook has been renamed and moved to the top-level package scope.
-`cudaPackages.autoFixElfFiles` has been deprecated for `pkgs.autoFixElfFiles`. Functionality has not changed, but the setuphook has been renamed and moved to the top-level package scope.
-`pdns` was updated to version [v4.9.x](https://doc.powerdns.com/authoritative/changelog/4.9.html), which introduces breaking changes. Check out the [Upgrade Notes](https://doc.powerdns.com/authoritative/upgrading.html#to-4-9-0) for details.
-`git-town` was updated from version `11` to `13`. See the [changelog](https://github.com/git-town/git-town/blob/main/CHANGELOG.md#1300-2024-03-22) for breaking changes.
-`idris2` was updated to v0.7.0. This version introduces breaking changes. Check out the [changelog](https://github.com/idris-lang/Idris2/blob/v0.7.0/CHANGELOG.md#v070) for details.
-`nvtop` family of packages was reorganized into nested attrset. `nvtop` has been renamed to `nvtopPackages.full`, and all `nvtop-{amd,nvidia,intel,msm}` packages are now named as `nvtopPackages.{amd,nvidia,intel,msm}`
-`unifiLTS`, `unifi5` and `unifi6` have been removed, as they require MongoDB versions which are end-of-life. All these versions can be upgraded to `unifi7` directly.
-`nitter` requires a `guest_accounts.jsonl` to be provided as a path or loaded into the default location at `/var/lib/nitter/guest_accounts.jsonl`. See [Guest Account Branch Deployment](https://github.com/zedeus/nitter/wiki/Guest-Account-Branch-Deployment) for details.
-`boot.supportedFilesystems` and `boot.initrd.supportedFilesystems` are now attribute sets instead of lists. Assignment from lists as done previously is still supported, but checking whether a filesystem is enabled must now by done using `supportedFilesystems.fs or false` instead of using `lib.elem "fs" supportedFilesystems` as was done previously.
-`openssh`, `openssh_hpn` and `openssh_gssapi` are now compiled without support for the DSA signature algorithm as it is being deprecated upstream. Users still relying on DSA keys should consider upgrading
to another signature algorithm. It is however possible, for the time being, to restore the DSA keys support using `override` to set `dsaKeysSupport = true`.
-`buildGoModule` now throws error when `vendorHash` is not specified. `vendorSha256`, deprecated in Nixpkgs 23.11, is now ignored and is no longer a `vendorHash` alias.
- Invidious has changed its default database username from `kemal` to `invidious`. Setups involving an externally provisioned database (i.e. `services.invidious.database.createLocally == false`) should adjust their configuration accordingly. The old `kemal` user will not be removed automatically even when the database is provisioned automatically.(https://github.com/NixOS/nixpkgs/pull/265857)
-`writeReferencesToFile` is deprecated in favour of the new trivial build helper `writeClosure`. The latter accepts a list of paths and has an unambiguous name and cleaner implementation.
-`inetutils` now has a lower priority to avoid shadowing the commonly used `util-linux`. If one wishes to restore the default priority, simply use `lib.setPrio 5 inetutils` or override with `meta.priority = 5`.
-`paperless`' `services.paperless.extraConfig` setting has been removed and converted to the freeform type and option named `services.paperless.settings`.
-`davfs2`' `services.davfs2.extraConfig` setting has been deprecated and converted to the freeform type option named `services.davfs2.settings` according to RFC42.
-`services.homepage-dashboard` now takes it's configuration using native Nix expressions, rather than dumping templated configurations into `/var/lib/homepage-dashboard` where they were previously managed manually. There are now new options which allow the configuration of bookmarks, services, widgets and custom CSS/JS natively in Nix.
-`hare` may now be cross-compiled. For that to work, however, `haredoc` needed to stop being built together with it. Thus, the latter is now its own package with the name of `haredoc`.
To make the `azure-cli` immutable and prevent clashes in case `azure-cli` is also installed via other package managers, some configuration files were moved into the derivation.
This can be disabled by overriding `withImmutableConfig = false` when building `azure-cli`.
-`services.frp.settings` now generates the frp configuration file in TOML format as [recommended by upstream](https://github.com/fatedier/frp#configuration-files), instead of the legacy INI format. This has also introduced other changes in the configuration file structure and options.
- The `settings.common` section in the configuration is no longer valid and all the options form inside it now goes directly under `settings`.
- The `_` separating words in the configuration options is removed so the options are now in camel case. For example: `server_addr` becomes `serverAddr`, `server_port` becomes `serverPort` etc.
- Proxies are now defined with a new option `settings.proxies` which takes a list of proxies.
- Consult the [upstream documentation](https://github.com/fatedier/frp#example-usage) for more details on the changes.
-`gonic` has been updated to v0.16.4. Config now requires `playlists-path` to be set. See the rest of the [v0.16.0 release notes](https://github.com/sentriz/gonic/releases/tag/v0.16.0) for more details.
- The `services.vikunja.setupNginx` setting has been removed. Users now need to setup the webserver configuration on their own with a proxy pass to the vikunja service.
- The package `optparse-bash` is now dropped due to upstream inactivity. Alternatives available in Nixpkgs include [`argc`](https://github.com/sigoden/argc), [`argbash`](https://github.com/matejak/argbash), [`bashly`](https://github.com/DannyBen/bashly) and [`gum`](https://github.com/charmbracelet/gum), to name a few.
- The `craftos-pc` package has been updated to v2.8, which includes [breaking changes](https://github.com/MCJack123/craftos2/releases/tag/v2.8).
- Files are now handled in binary mode; this could break programs with embedded UTF-8 characters.
- The ROM was updated to match ComputerCraft version v1.109.2.
- The bundled Lua was updated to Lua v5.2, which includes breaking changes. See the [Lua manual](https://www.lua.org/manual/5.2/manual.html#8) for more information.
- The WebSocket API [was rewritten](https://github.com/MCJack123/craftos2/issues/337), which introduced breaking changes.
- The latest available version of Nextcloud is v28 (available as `pkgs.nextcloud28`). The installation logic is as follows:
- If [`services.nextcloud.package`](#opt-services.nextcloud.package) is specified explicitly, this package will be installed (**recommended**)
- If [`system.stateVersion`](#opt-system.stateVersion) is >=24.05, `pkgs.nextcloud28` will be installed by default.
- If [`system.stateVersion`](#opt-system.stateVersion) is >=23.11, `pkgs.nextcloud27` will be installed by default.
- Please note that an upgrade from v26 (or older) to v28 directly is not possible. Please upgrade to `nextcloud27` (or earlier) first. Nextcloud prohibits skipping major versions while upgrading. You can upgrade by declaring [`services.nextcloud.package = pkgs.nextcloud27;`](options.html#opt-services.nextcloud.package).
- The vendored third party libraries have been mostly removed from `cudaPackages.nsight_systems`, which we now only ship for `cudaPackages_11_8` and later due to outdated dependencies. Users comfortable with the vendored dependencies may use `overrideAttrs` to amend the `postPatch` phase and the `meta.broken` correspondingly. Alternatively, one could package the deprecated `boost170` locally, as required for `cudaPackages_11_4.nsight_systems`.
- The `halloy` package was updated past 2024.5 which introduced a breaking change by switching the config format from YAML to TOML. See https://github.com/squidowl/halloy/releases/tag/2024.5 for details.
- Ada packages (libraries and tools) have been moved into the `gnatPackages` scope. `gnatPackages` uses the default GNAT compiler, `gnat12Packages` and `gnat13Packages` use the respective matching compiler version.
-`spark2014` has been renamed to `gnatprove`. A version of `gnatprove` matching different GNAT versions is available from the different `gnatPackages` sets.
-`services.resolved.fallbackDns` can now be used to disable the upstream fallback servers entirely by setting it to an empty list. To get the previous behaviour of the upstream defaults set it to null, the new default, instead.
-`xxd` has been moved from `vim` default output to its own output to reduce closure size. The canonical way to reference it across all platforms is `unixtools.xxd`.
- The `stalwart-mail` package has been updated to v0.5.3, which includes [breaking changes](https://github.com/stalwartlabs/mail-server/blob/v0.5.3/UPGRADING.md).
-`services.avahi.nssmdns` got split into `services.avahi.nssmdns4` and `services.avahi.nssmdns6` which enable the mDNS NSS switch for IPv4 and IPv6 respectively.
Since most mDNS responders only register IPv4 addresses, most users want to keep the IPv6 support disabled to avoid long timeouts.
-`services.pgbouncer` now has systemd support enabled and will log to journald. The default setting for `services.pgbouncer.logFile` is now `null` to disable logging to a separate log file.
-`services.archisteamfarm` no longer uses the abbreviation `asf` for its state directory (`/var/lib/asf`), user and group (both `asf`). Instead the long name `archisteamfarm` is used.
Configurations with `system.stateVersion` 23.11 or earlier, default to the old stateDirectory until the 24.11 release and must either set the option explicitly or move the data to the new directory.
-`networking.iproute2.enable` now does not set `environment.etc."iproute2/rt_tables".text`.
Setting `environment.etc."iproute2/{CONFIG_FILE_NAME}".text` will override the whole configuration file instead of appending it to the upstream configuration file.
`CONFIG_FILE_NAME` includes `bpf_pinning`, `ematch_map`, `group`, `nl_protos`, `rt_dsfield`, `rt_protos`, `rt_realms`, `rt_scopes`, and `rt_tables`.
- The executable file names for `firefox-devedition`, `firefox-beta`, `firefox-esr` now matches their package names, which is consistent with the `firefox-*-bin` packages. The desktop entries are also updated so that you can have multiple editions of firefox in your app launcher.
- The `systemd.oomd` module behavior is changed as:
- Raise ManagedOOMMemoryPressureLimit from 50% to 80%. This should make systemd-oomd kill things less often, and fix issues like [this](https://pagure.io/fedora-workstation/issue/358).
- Remove swap policy. This helps prevent killing processes when user's swap is small.
- Expand the memory pressure policy to system.slice, user-.slice, and all user owned slices. Reference: [commit](https://src.fedoraproject.org/rpms/systemd/c/7665e1796f915dedbf8e014f0a78f4f576d609bb)
-`systemd.oomd.enableUserServices` is renamed to `systemd.oomd.enableUserSlices`.
- The configuration format for `services.prometheus.exporters.snmp` changed with release 0.23.0.
The module now includes an optional config check, that is enabled by default, to make the change obvious before any deployment.
More information about the configuration syntax change is available in the [upstream repository](https://github.com/prometheus/snmp_exporter/blob/b75fc6b839ee3f3ccbee68bee55f1ae99555084a/auth-split-migration.md).
- [watchdogd](https://troglobit.com/projects/watchdogd/), a system and process supervisor using watchdog timers. Available as [services.watchdogd](#opt-services.watchdogd.enable).
- The `jdt-language-server` package now uses upstream's provided python wrapper instead of our own custom wrapper. This results in the following breaking and notable changes:
- The main binary for the package is now named `jdtls` instead of `jdt-language-server`, equivalent to what most editors expect the binary to be named.
- JVM arguments should now be provided with the `--jvm-arg` flag instead of setting `JAVA_OPTS`.
- The `-data` path is no longer required to run the package, and will be set to point to a folder in `$TMP` if missing.
-`nomad` has been updated - note that HashiCorp recommends updating one minor version at a time. Please check [their upgrade guide](https://developer.hashicorp.com/nomad/docs/upgrade) for information on safely updating clusters and potential breaking changes.
-`nomad` is now Nomad 1.7.x.
-`nomad_1_4` has been removed, as it is now unsupported upstream.
- Dwarf Fortress has been updated to version 50, and its derivations continue to menace with spikes of Nix and bash. Version 50 is identical to the version on Steam, but without the paid elements like tilepacks.
dfhack and Dwarf Therapist still work, and older versions are still packaged in case you'd like to roll back. Note that DF 50 saves will not be compatible with DF 0.47 and earlier.
See [Bay 12 Games](http://www.bay12games.com/dwarves/) for more details on what's new in Dwarf Fortress.
- Running an earlier version can be achieved through an override: `dwarf-fortress-packages.dwarf-fortress-full.override { dfVersion = "0.47.5"; }`
- Ruby plugin support has been disabled in DFHack. Many of the Ruby plugins have been converted to Lua, and support was removed upstream due to frequent crashes.
- The `livebook` package is now built as a `mix release` instead of an `escript`.
This means that configuration now has to be done using [environment variables](https://hexdocs.pm/livebook/readme.html#environment-variables) instead of command line arguments.
This has the further implication that the `livebook` service configuration has changed:
- The `erlang_node_short_name`, `erlang_node_name`, `port` and `options` configuration parameters are gone, and have been replaced with an `environment` parameter.
Use the appropriate [environment variables](https://hexdocs.pm/livebook/readme.html#environment-variables) inside `environment` to configure the service instead.
-`akkoma` now requires explicitly setting the base URL for uploaded media (`settings."Pleroma.Upload".base_url`), as well as for the media proxy if enabled (`settings."Media"`).
This is recommended to be a separate (sub)domain to the one Akkoma is hosted at.
See [here](https://meta.akkoma.dev/t/akkoma-stable-2024-03-securer-i-barely-know-her/681#explicit-upload-and-media-proxy-domains-5) for more details.
- The `crystal` package has been updated to 1.11.x, which has some breaking changes.
Refer to crystal's changelog for more information. ([v1.10](https://github.com/crystal-lang/crystal/blob/master/CHANGELOG.md#1100-2023-10-09), [v1.11](https://github.com/crystal-lang/crystal/blob/master/CHANGELOG.md#1110-2024-01-08))
-`addDriverRunpath` has been added to facilitate the deprecation of the old `addOpenGLRunpath` setuphook. This change is motivated by the evolution of the setuphook to include all hardware acceleration.
- Cinnamon has been updated to 6.0. Please beware that the [Wayland session](https://blog.linuxmint.com/?p=4591) is still experimental in this release and could potentially [affect Xorg sessions](https://blog.linuxmint.com/?p=4639). We suggest a reboot when switching between sessions.
- MATE has been updated to 1.28.
- To properly support panel plugins built with Wayland (in-process) support, we are introducing `services.xserver.desktopManager.mate.extraPanelApplets` option, please use that for installing panel applets.
- Similarly, please use `services.xserver.desktopManager.mate.extraCajaExtensions` option for installing Caja extensions.
- To use the Wayland session, enable `services.xserver.desktopManager.mate.enableWaylandSession`. This is opt-in for now as it is in early stage and introduces a new set of Wayfire closure. Due to [known issues with LightDM](https://github.com/canonical/lightdm/issues/63), we suggest using SDDM for display manager.
- New `boot.loader.systemd-boot.xbootldrMountPoint` allows setting up a separate [XBOOTLDR partition](https://uapi-group.org/specifications/specs/boot_loader_specification/) to store boot files. Useful on systems with a small EFI System partition that cannot be easily repartitioned.
-`boot.loader.systemd-boot` will now verify that `efiSysMountPoint` (and `xbootldrMountPoint` if configured) are mounted partitions.
-`services.postgresql.extraPlugins` changed its type from just a list of packages to also a function that returns such a list.
For example a config line like ``services.postgresql.extraPlugins = with pkgs.postgresql_11.pkgs; [ postgis ];`` is recommended to be changed to ``services.postgresql.extraPlugins = ps: with ps; [ postgis ];``;
- The Matrix homeserver [Synapse](https://element-hq.github.io/synapse/) module now supports configuring UNIX domain socket [listeners](#opt-services.matrix-synapse.settings.listeners) through the `path` option.
The default replication worker on the main instance has been migrated away from TCP sockets to UNIX domain sockets.
- Programs written in [D](https://dlang.org/) using the `dub` build system and package manager can now be built using `buildDubPackage` utilizing lockfiles provided by the new `dub-to-nix` helper program.
See the [D section](https://nixos.org/manual/nixpkgs/unstable#dlang) in the manual for more information.
This version of Portunus supports strong password hashes, but the legacy hash SHA-256 is also still supported to ensure a smooth migration of existing user accounts.
After upgrading, follow the instructions on the [upstream release notes](https://github.com/majewsky/portunus/releases/tag/v2.0.0) to upgrade all user accounts to strong password hashes.
Support for weak password hashes will be removed in NixOS 24.11.
- A stdenv's default set of hardening flags can now be set via its `bintools-wrapper`'s `defaultHardeningFlags` argument. A convenient stdenv adapter, `withDefaultHardeningFlags`, can be used to override an existing stdenv's `defaultHardeningFlags`.
- Garage has been updated to v1.x.x. Users should read the [upstream release notes](https://git.deuxfleurs.fr/Deuxfleurs/garage/releases/tag/v1.0.0) and follow the documentation when changing over their `services.garage.package` and performing this manual upgrade.
- The following options of the Nextcloud module were moved into [`services.nextcloud.settings`](#opt-services.nextcloud.settings) and renamed to match the name from Nextcloud's `config.php`:
-`stdenv`: The `--replace` flag in `substitute`, `substituteInPlace`, `substituteAll`, `substituteAllStream`, and `substituteStream` is now deprecated if favor of the new `--replace-fail`, `--replace-warn` and `--replace-quiet`. The deprecated `--replace` equates to `--replace-warn`.
- With a bump to `sonarr` v4, existing config database files will be upgraded automatically, but note that some old apparently-working configs [might actually be corrupt and fail to upgrade cleanly](https://forums.sonarr.tv/t/sonarr-v4-released/33089).
-`libjxl` 0.9.0 [dropped support for the butteraugli API](https://github.com/libjxl/libjxl/pull/2576). You will no longer be able to set `enableButteraugli` on `libaom`.
- The source of the `mockgen` package has changed to the [go.uber.org/mock](https://github.com/uber-go/mock) fork because [the original repository is no longer maintained](https://github.com/golang/mock#gomock).
- [](#opt-boot.kernel.sysctl._net.core.wmem_max_) changed from a string to an integer because of the addition of a custom merge option (taking the highest value defined to avoid conflicts between 2 services trying to set that value), just as [](#opt-boot.kernel.sysctl._net.core.rmem_max_) since 22.11.
- A new top-level package set, `pkgsExtraHardening` is added. This is a set of packages built with stricter hardening flags - those that have not yet received enough testing to be applied universally, those that are more likely to cause build failures or those that have drawbacks to their use (e.g. performance or required hardware features).
-`castopod` has some migration actions to be taken in case of a S3 setup. Some new features may also need some manual migration actions. See [https://code.castopod.org/adaures/castopod/-/releases](https://code.castopod.org/adaures/castopod/-/releases) for more informations.
-`nextcloud-setup.service` no longer changes the group of each file & directory inside `/var/lib/nextcloud/{config,data,store-apps}` if one of these directories has the wrong owner group. This was part of transitioning the group used for `/var/lib/nextcloud`, but isn't necessary anymore.
- The `krb5` module has been rewritten and moved to `security.krb5`, moving all options but `security.krb5.enable` and `security.krb5.package` into `security.krb5.settings`.
-`services.soju` now has a wrapper for the `sojuctl` command, pointed at the service config file. It also has the new option `adminSocket.enable`, which creates a unix admin socket at `/run/soju/admin`.
- Gitea 1.21 upgrade has several breaking changes, including:
- Custom themes and other assets that were previously stored in `custom/public/*` now belong in `custom/public/assets/*`
- New instances of Gitea using MySQL now ignore the `[database].CHARSET` config option and always use the `utf8mb4` charset, existing instances should migrate via the `gitea doctor convert` CLI command.
- The `services.paperless` module no longer uses the previously downloaded NLTK data stored in `/var/cache/paperless/nltk`. This directory can be removed.
- The `hardware.pulseaudio` module now sets permission of pulse user home directory to 755 when running in "systemWide" mode. It fixes [issue 114399](https://github.com/NixOS/nixpkgs/issues/114399).
- The `services.networkmanager.extraConfig` was renamed to `services.networkmanager.settings` and was changed to use the ini type instead of using a multiline string.
- The module `services.github-runner` has been removed. To configure a single GitHub Actions Runner refer to `services.github-runners.*`. Note that this will trigger a new runner registration.
- YouTrack is bumped to 2023.3. The update is not performed automatically, it requires manual interaction. See the YouTrack section in the manual for details.
- QtMultimedia has changed its default backend to `QT_MEDIA_BACKEND=ffmpeg` (previously `gstreamer` on Linux or `darwin` on MacOS).
The previous native backends remain available but are now minimally maintained. Refer to [upstream documentation](https://doc.qt.io/qt-6/qtmultimedia-index.html#ffmpeg-as-the-default-backend) for further details about each platform.
- The `drbd` out-of-tree Linux kernel driver has been added in version `9.2.7`. With it the DRBD 9.x features can be used instead of the 8.x features provided by the `8.4.11` in-tree driver.
-`documentation.man.mandoc` now by default uses `MANPATH` to set the directories where mandoc will search for manual pages.
This enables mandoc to find manual pages in Nix profiles. To set the manual search paths via the `mandoc.conf` configuration file like before, use `documentation.man.mandoc.settings.manpath` instead.
