3
0
Fork 0
forked from mirrors/nixpkgs
nixpkgs/nixos/doc/manual/release-notes/rl-2009.xml
davidak 5a3738d22b
nixos/systemPackages: clean up (#91213)
* nixos/systemPackages: clean up

* Update nixos/doc/manual/release-notes/rl-2009.xml

Co-authored-by: Jan Tojnar <jtojnar@gmail.com>

* Update nixos/doc/manual/release-notes/rl-2009.xml

Co-authored-by: 8573 <8573@users.noreply.github.com>

Co-authored-by: Jan Tojnar <jtojnar@gmail.com>
Co-authored-by: 8573 <8573@users.noreply.github.com>
2020-08-20 13:45:54 +00:00

916 lines
40 KiB
XML

<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09">
<title>Release 20.09 (“Nightingale”, 2020.09/??)</title>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09-highlights">
<title>Highlights</title>
<para>
In addition to numerous new and upgraded packages, this release has the
following highlights:
</para>
<itemizedlist>
<listitem>
<para>
Support is planned until the end of April 2021, handing over to 21.03.
</para>
</listitem>
<listitem>
<para>GNOME desktop environment was upgraded to 3.36, see its <link xlink:href="https://help.gnome.org/misc/release-notes/3.36/">release notes</link>.</para>
</listitem>
<listitem>
<para>
<package>maxx</package> package removed along with <varname>services.xserver.desktopManager.maxx</varname> module.
Please migrate to <package>cdesktopenv</package> and <varname>services.xserver.desktopManager.cde</varname> module.
</para>
</listitem>
<listitem>
<para>
We now distribute a GNOME ISO.
</para>
</listitem>
<listitem>
<para>
PHP now defaults to PHP 7.4, updated from 7.3.
</para>
</listitem>
<listitem>
<para>
PHP 7.2 is no longer supported due to upstream not supporting this version for the entire lifecycle of the 20.09 release.
</para>
</listitem>
<listitem>
<para>
Python 3 now defaults to Python 3.8 instead of 3.7.
</para>
</listitem>
<listitem>
<para>
Two new options, <link linkend="opt-services.openssh.authorizedKeysCommand">authorizedKeysCommand</link>
and <link linkend="opt-services.openssh.authorizedKeysCommandUser">authorizedKeysCommandUser</link>, have
been added to the <literal>openssh</literal> module. If you have <literal>AuthorizedKeysCommand</literal>
in your <link linkend="opt-services.openssh.extraConfig">services.openssh.extraConfig</link> you should
make use of these new options instead.
</para>
</listitem>
<listitem>
<para>
There is a new module for Podman(<varname>virtualisation.podman</varname>), a drop-in replacement for the Docker command line.
</para>
</listitem>
<listitem>
<para>
The new <varname>virtualisation.containers</varname> module manages configuration shared by the CRI-O and Podman modules.
</para>
</listitem>
<listitem>
<para>
Declarative Docker containers are renamed from <varname>docker-containers</varname> to <varname>virtualisation.oci-containers.containers</varname>.
This is to make it possible to use <literal>podman</literal> instead of <literal>docker</literal>.
</para>
</listitem>
<listitem>
<para>
MariaDB has been updated to 10.4, MariaDB Galera to 26.4.
Before you upgrade, it would be best to take a backup of your database.
For MariaDB Galera Cluster, see <link xlink:href="https://mariadb.com/kb/en/upgrading-from-mariadb-103-to-mariadb-104-with-galera-cluster/">Upgrading
from MariaDB 10.3 to MariaDB 10.4 with Galera Cluster</link> instead.
Before doing the upgrade read <link xlink:href="https://mariadb.com/kb/en/upgrading-from-mariadb-103-to-mariadb-104/#incompatible-changes-between-103-and-104">Incompatible
Changes Between 10.3 and 10.4</link>.
After the upgrade you will need to run <literal>mysql_upgrade</literal>.
MariaDB 10.4 introduces a number of changes to the authentication process, intended to make things easier and more
intuitive. See <link xlink:href="https://mariadb.com/kb/en/authentication-from-mariadb-104/">Authentication from MariaDB 10.4</link>.
unix_socket auth plugin does not use a password, and uses the connecting user's UID instead. When a new MariaDB data directory is initialized, two MariaDB users are
created and can be used with new unix_socket auth plugin, as well as traditional mysql_native_password plugin: root@localhost and mysql@localhost. To actually use
the traditional mysql_native_password plugin method, one must run the following:
<programlisting>
services.mysql.initialScript = pkgs.writeText "mariadb-init.sql" ''
ALTER USER root@localhost IDENTIFIED VIA mysql_native_password USING PASSWORD("verysecret");
'';
</programlisting>
When MariaDB data directory is just upgraded (not initialized), the users are not created or modified.
</para>
</listitem>
<listitem>
<para>
MySQL server is now started with additional systemd sandbox/hardening options for better security. The PrivateTmp, ProtectHome, and ProtectSystem options
may be problematic when MySQL is attempting to read from or write to your filesystem anywhere outside of its own state directory, for example when
calling <literal>LOAD DATA INFILE or SELECT * INTO OUTFILE</literal>. In this scenario a variant of the following may be required:
- allow MySQL to read from /home and /tmp directories when using <literal>LOAD DATA INFILE</literal>
<programlisting>
systemd.services.mysql.serviceConfig.ProtectHome = lib.mkForce "read-only";
</programlisting>
- allow MySQL to write to custom folder <literal>/var/data</literal> when using <literal>SELECT * INTO OUTFILE</literal>, assuming the mysql user has write
access to <literal>/var/data</literal>
<programlisting>
systemd.services.mysql.serviceConfig.ReadWritePaths = [ "/var/data" ];
</programlisting>
</para>
<para>
The MySQL service no longer runs its <literal>systemd</literal> service startup script as <literal>root</literal> anymore. A dedicated non <literal>root</literal>
super user account is required for operation. This means users with an existing MySQL or MariaDB database server are required to run the following SQL statements
as a super admin user before upgrading:
<programlisting>
CREATE USER IF NOT EXISTS 'mysql'@'localhost' identified with unix_socket;
GRANT ALL PRIVILEGES ON *.* TO 'mysql'@'localhost' WITH GRANT OPTION;
</programlisting>
If you use MySQL instead of MariaDB please replace <literal>unix_socket</literal> with <literal>auth_socket</literal>. If you have changed the value of <xref linkend="opt-services.mysql.user"/>
from the default of <literal>mysql</literal> to a different user please change <literal>'mysql'@'localhost'</literal> to the corresponding user instead.
</para>
</listitem>
<listitem>
<para>
Two new option <link linkend="opt-documentation.man.generateCaches">documentation.man.generateCaches</link>
has been added to automatically generate the <literal>man-db</literal> caches, which are needed by utilities
like <command>whatis</command> and <command>apropos</command>. The caches are generated during the build of
the NixOS configuration: since this can be expensive when a large number of packages are installed, the
feature is disabled by default.
</para>
</listitem>
<listitem>
<para>
<varname>services.postfix.sslCACert</varname> was replaced by <varname>services.postfix.tlsTrustedAuthorities</varname> which now defaults to system certifcate authorities.
</para>
</listitem>
<listitem>
<para>
Subordinate GID and UID mappings are now set up automatically for all normal users.
This will make container tools like Podman work as non-root users out of the box.
</para>
</listitem>
<listitem>
<para>
The various documented workarounds to use steam have been converted to a module. <varname>programs.steam.enable</varname> enables steam, controller support and the workarounds.
</para>
</listitem>
<listitem>
<para>
Support for built-in LCDs in various pieces of Logitech hardware (keyboards and USB speakers). <varname>hardware.logitech.lcd.enable</varname> enables support for all hardware supported by the g15daemon project.
</para>
</listitem>
</itemizedlist>
</section>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09-new-services">
<title>New Services</title>
<para>
The following new services were added since the last release:
</para>
<itemizedlist>
<listitem>
<para>
There is a new <xref linkend="opt-security.doas.enable"/> module that provides <command>doas</command>, a lighter alternative to <command>sudo</command> with many of the same features.
</para>
</listitem>
</itemizedlist>
</section>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09-incompatibilities">
<title>Backward Incompatibilities</title>
<para>
When upgrading from a previous release, please be aware of the following
incompatible changes:
</para>
<itemizedlist>
<listitem>
<para>
<literal>buildGoModule</literal> now internally creates a vendor directory
in the source tree for downloaded modules instead of using go's <link
xlink:href="https://golang.org/cmd/go/#hdr-Module_proxy_protocol">module
proxy protocol</link>. This storage format is simpler and therefore less
likekly to break with future versions of go. As a result
<literal>buildGoModule</literal> switched from
<literal>modSha256</literal> to the <literal>vendorSha256</literal>
attribute to pin fetched version data.
</para>
</listitem>
<listitem>
<para>
Grafana is now built without support for phantomjs by default. Phantomjs support has been
<link xlink:href="https://grafana.com/docs/grafana/latest/guides/whats-new-in-v6-4/">deprecated in Grafana</link>
and the <package>phantomjs</package> project is
<link xlink:href="https://github.com/ariya/phantomjs/issues/15344#issue-302015362">currently unmaintained</link>.
It can still be enabled by providing <literal>phantomJsSupport = true</literal> to the package instanciation:
<programlisting>{
services.grafana.package = pkgs.grafana.overrideAttrs (oldAttrs: rec {
phantomJsSupport = false;
});
}</programlisting>
</para>
</listitem>
<listitem>
<para>
The <link linkend="opt-services.supybot.enable">supybot</link> module now uses <literal>/var/lib/supybot</literal>
as its default <link linkend="opt-services.supybot.stateDir">stateDir</link> path if <literal>stateVersion</literal>
is 20.09 or higher. It also enables number of
<link xlink:href="https://www.freedesktop.org/software/systemd/man/systemd.exec.html#Sandboxing">systemd sandboxing options</link>
which may possibly interfere with some plugins. If this is the case you can disable the options through attributes in
<option>systemd.services.supybot.serviceConfig</option>.
</para>
</listitem>
<listitem>
<para>
The <literal>security.duosec.skey</literal> option, which stored a secret in the
nix store, has been replaced by a new
<link linkend="opt-security.duosec.secretKeyFile">security.duosec.secretKeyFile</link>
option for better security.
</para>
<para>
<literal>security.duosec.ikey</literal> has been renamed to
<link linkend="opt-security.duosec.integrationKey">security.duosec.integrationKey</link>.
</para>
</listitem>
<listitem>
<para>
<literal>vmware</literal> has been removed from the <literal>services.x11.videoDrivers</literal> defaults.
For VMWare guests set <literal>virtualisation.vmware.guest.enable</literal> to <literal>true</literal> which will include the appropriate drivers.
</para>
</listitem>
<listitem>
<para>
The initrd SSH support now uses OpenSSH rather than Dropbear to
allow the use of Ed25519 keys and other OpenSSH-specific
functionality. Host keys must now be in the OpenSSH format, and at
least one pre-generated key must be specified.
</para>
<para>
If you used the <option>boot.initrd.network.ssh.host*Key</option>
options, you'll get an error explaining how to convert your host
keys and migrate to the new
<option>boot.initrd.network.ssh.hostKeys</option> option.
Otherwise, if you don't have any host keys set, you'll need to
generate some; see the <option>hostKeys</option> option
documentation for instructions.
</para>
</listitem>
<listitem>
<para>
Since this release there's an easy way to customize your PHP
install to get a much smaller base PHP with only wanted
extensions enabled. See the following snippet installing a
smaller PHP with the extensions <literal>imagick</literal>,
<literal>opcache</literal>, <literal>pdo</literal> and
<literal>pdo_mysql</literal> loaded:
<programlisting>
environment.systemPackages = [
(pkgs.php.withExtensions
({ all, ... }: with all; [
imagick
opcache
pdo
pdo_mysql
])
)
];</programlisting>
The default <literal>php</literal> attribute hasn't lost any
extensions. The <literal>opcache</literal> extension has been
added.
All upstream PHP extensions are available under <package><![CDATA[php.extensions.<name?>]]></package>.
</para>
<para>
All PHP <literal>config</literal> flags have been removed for
the following reasons:
<itemizedlist>
<listitem>
<para>
The updated <literal>php</literal> attribute is now easily
customizable to your liking by using
<literal>php.withExtensions</literal> or
<literal>php.buildEnv</literal> instead of writing config files
or changing configure flags.
</para>
</listitem>
<listitem>
<para>
The remaining configuration flags can now be set directly on
the <literal>php</literal> attribute. For example, instead of
<programlisting>
php.override {
config.php.embed = true;
config.php.apxs2 = false;
}
</programlisting>
you should now write
<programlisting>
php.override {
embedSupport = true;
apxs2Support = false;
}
</programlisting>
</para>
</listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>
Gollum received a major update to version 5.x and you may have to change
some links in your wiki when migrating from gollum 4.x. More information
can be found
<link xlink:href="https://github.com/gollum/gollum/wiki/5.0-release-notes#migrating-your-wiki">here</link>.
</para>
</listitem>
<listitem>
<para>
Deluge 2.x was added and is used as default for new NixOS
installations where stateVersion is >= 20.09. If you are upgrading from a previous
NixOS version, you can set <literal>service.deluge.package = pkgs.deluge-2_x</literal>
to upgrade to Deluge 2.x and migrate the state to the new format.
Be aware that backwards state migrations are not supported by Deluge.
</para>
</listitem>
<listitem>
<para>
Add option <literal>services.nginx.enableSandbox</literal> to starting Nginx web server with additional sandbox/hardening options.
By default, write access to <literal>services.nginx.stateDir</literal> is allowed. To allow writing to other folders,
use <literal>systemd.services.nginx.serviceConfig.ReadWritePaths</literal>
<programlisting>
systemd.services.nginx.serviceConfig.ReadWritePaths = [ "/var/www" ];
</programlisting>
</para>
</listitem>
<listitem>
<para>
The NixOS options <literal>nesting.clone</literal> and
<literal>nesting.children</literal> have been deleted, and
replaced with named <xref linkend="opt-specialisation"/>
configurations.
</para>
<para>
Replace a <literal>nesting.clone</literal> entry with:
<programlisting>{
<link xlink:href="#opt-specialisation">specialisation.example-sub-configuration</link> = {
<link xlink:href="#opt-specialisation._name_.configuration">configuration</link> = {
...
};
};</programlisting>
</para>
<para>
Replace a <literal>nesting.children</literal> entry with:
<programlisting>{
<link xlink:href="#opt-specialisation">specialisation.example-sub-configuration</link> = {
<link xlink:href="#opt-specialisation._name_.inheritParentConfig">inheritParentConfig</link> = false;
<link xlink:href="#opt-specialisation._name_.configuration">configuration</link> = {
...
};
};</programlisting>
</para>
<para>
To switch to a specialised configuration at runtime you need to
run:
<programlisting>
# sudo /run/current-system/specialisation/example-sub-configuration/bin/switch-to-configuration test
</programlisting>
Before you would have used:
<programlisting>
# sudo /run/current-system/fine-tune/child-1/bin/switch-to-configuration test
</programlisting>
</para>
</listitem>
<listitem>
<para>
The Nginx log directory has been moved to <literal>/var/log/nginx</literal>, the cache directory
to <literal>/var/cache/nginx</literal>. The option <literal>services.nginx.stateDir</literal> has
been removed.
</para>
</listitem>
<listitem>
<para>
The httpd web server previously started its main process as root
privileged, then ran worker processes as a less privileged identity user.
This was changed to start all of httpd as a less privileged user (defined by
<xref linkend="opt-services.httpd.user"/> and
<xref linkend="opt-services.httpd.group"/>). As a consequence, all files that
are needed for httpd to run (included configuration fragments, SSL
certificates and keys, etc.) must now be readable by this less privileged
user/group.
</para>
<para>
The default value for <xref linkend="opt-services.httpd.mpm"/>
has been changed from <literal>prefork</literal> to <literal>event</literal>. Along with
this change the default value for
<link linkend="opt-services.httpd.virtualHosts">services.httpd.virtualHosts.&lt;name&gt;.http2</link>
has been set to <literal>true</literal>.
</para>
</listitem>
<listitem>
<para>
The <literal>systemd-networkd</literal> option
<literal>systemd.network.networks.&lt;name&gt;.dhcp.CriticalConnection</literal>
has been removed following upstream systemd's deprecation of the same. It is recommended to use
<literal>systemd.network.networks.&lt;name&gt;.networkConfig.KeepConfiguration</literal> instead.
See <citerefentry><refentrytitle>systemd.network</refentrytitle>
<manvolnum>5</manvolnum></citerefentry> for details.
</para>
</listitem>
<listitem>
<para>
The <literal>systemd-networkd</literal> option
<literal>systemd.network.networks._name_.dhcpConfig</literal>
has been renamed to
<xref linkend="opt-systemd.network.networks._name_.dhcpV4Config"/>
following upstream systemd's documentation change.
See <citerefentry><refentrytitle>systemd.network</refentrytitle>
<manvolnum>5</manvolnum></citerefentry> for details.
</para>
</listitem>
<listitem>
<para>
In the <literal>picom</literal> module, several options that accepted
floating point numbers encoded as strings (for example
<xref linkend="opt-services.picom.activeOpacity"/>) have been changed
to the (relatively) new native <literal>float</literal> type. To migrate
your configuration simply remove the quotes around the numbers.
</para>
</listitem>
<listitem>
<para>
When using <literal>buildBazelPackage</literal> from Nixpkgs,
<literal>flat</literal> hash mode is now used for dependencies
instead of <literal>recursive</literal>. This is to better allow
using hashed mirrors where needed. As a result, these hashes
will have changed.
</para>
</listitem>
<listitem>
<para>
The rkt module has been removed, it was archived by upstream.
</para>
</listitem>
<listitem>
<para>
The <link xlink:href="https://bazaar.canonical.com">Bazaar</link> VCS is
unmaintained and, as consequence of the Python 2 EOL, the packages
<literal>bazaar</literal> and <literal>bazaarTools</literal> were
removed. Breezy, the backward compatible fork of Bazaar (see the
<link xlink:href="https://www.jelmer.uk/breezy-intro.html">announcement</link>),
was packaged as <literal>breezy</literal> and can be used instead.
</para>
<para>
Regarding Nixpkgs, <literal>fetchbzr</literal>,
<literal>nix-prefetch-bzr</literal> and Bazaar support in Hydra will
continue to work through Breezy.
</para>
</listitem>
<listitem>
<para>
In addition to the hostname, the fully qualified domain name (FQDN),
which consists of <literal>${cfg.hostName}</literal> and
<literal>${cfg.domain}</literal> is now added to
<literal>/etc/hosts</literal>, to allow local FQDN resolution, as used by the
<literal>hostname --fqdn</literal> command and other applications that
try to determine the FQDN. These new entries take precedence over entries
from the DNS which could cause regressions in some very specific setups.
Additionally the hostname is now resolved to <literal>127.0.0.2</literal>
instead of <literal>127.0.1.1</literal> to be consistent with what
<literal>nss-myhostname</literal> (from systemd) returns.
The old behaviour can e.g. be restored by using
<literal>networking.hosts = lib.mkForce { "127.0.1.1" = [ config.networking.hostName ]; };</literal>.
</para>
</listitem>
<listitem>
<para>
The hostname (<literal>networking.hostName</literal>) must now be a valid
DNS label (see RFC 1035) and as such must not contain the domain part.
This means that the hostname must start with a letter, end with a letter
or digit, and have as interior characters only letters, digits, and
hyphen. The maximum length is 63 characters. Additionally it is
recommended to only use lower-case characters.
</para>
</listitem>
<listitem>
<para>
The GRUB specific option <option>boot.loader.grub.extraInitrd</option>
has been replaced with the generic option
<option>boot.initrd.secrets</option>. This option creates a secondary
initrd from the specified files, rather than using a manually created
initrd file.
Due to an existing bug with <option>boot.loader.grub.extraInitrd</option>,
it is not possible to directly boot an older generation that used that
option. It is still possible to rollback to that generation if the required
initrd file has not been deleted.
</para>
</listitem>
<listitem>
<para>
The <link xlink:href="https://github.com/okTurtles/dnschain">DNSChain</link>
package and NixOS module have been removed from Nixpkgs as the software is
unmaintained and can't be built. For more information see issue
<link xlink:href="https://github.com/NixOS/nixpkgs/issues/89205">#89205</link>.
</para>
</listitem>
<listitem>
<para>
In the <literal>resilio</literal> module, <xref linkend="opt-services.resilio.httpListenAddr"/> has been changed to listen to <literal>[::1]</literal> instead of <literal>0.0.0.0</literal>.
</para>
</listitem>
<listitem>
<para>
Users of <link xlink:href="http://openafs.org">OpenAFS 1.6</link> must
upgrade their services to OpenAFS 1.8! In this release, the OpenAFS package
version 1.6.24 is marked broken but can be used during transition to
OpenAFS 1.8.x. Use the options
<option>services.openafsClient.packages.module</option>,
<option>services.openafsClient.packages.programs</option> and
<option>services.openafsServer.package</option> to select a different
OpenAFS package. OpenAFS 1.6 will be removed in the next release. The
package <literal>openafs</literal> and the service options will then
silently point to the OpenAFS 1.8 release.
</para>
<para>
See also the OpenAFS <link
xlink:href="http://docs.openafs.org/AdminGuide/index.html">Administrator
Guide</link> for instructions. Beware of the following when updating
servers:
<itemizedlist>
<listitem>
<para>
The storage format of the server key has changed and the key must be converted before running the new release.
</para>
</listitem>
<listitem>
<para>
When updating multiple database servers, turn off the database servers
from the highest IP down to the lowest with resting periods in
between. Start up in reverse order. Do not concurrently run database
servers working with different OpenAFS releases!
</para>
</listitem>
<listitem>
<para>
Update servers first, then clients.
</para>
</listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>
Radicale's default package has changed from 2.x to 3.x. An upgrade
checklist can be found
<link xlink:href="https://github.com/Kozea/Radicale/blob/3.0.x/NEWS.md#upgrade-checklist">here</link>.
You can use the newer version in the NixOS service by setting the
<literal>package</literal> to <literal>radicale3</literal>, which is done
automatically if <literal>stateVersion</literal> is 20.09 or higher.
</para>
</listitem>
<listitem>
<para>
<literal>udpt</literal> experienced a complete rewrite from C++ to rust. The configuration format changed from ini to toml.
The new configuration documentation can be found at
<link xlink:href="https://naim94a.github.io/udpt/config.html">the official website</link> and example
configuration is packaged in <literal>${udpt}/share/udpt/udpt.toml</literal>.
</para>
</listitem>
<listitem>
<para>
We now have a unified <xref linkend="opt-services.xserver.displayManager.autoLogin"/> option interface
to be used for every display-manager in NixOS.
</para>
</listitem>
<listitem>
<para>
The <literal>bitcoind</literal> module has changed to multi-instance, using submodules.
Therefore, it is now mandatory to name each instance.
To use this new multi-instance config with an existing bitcoind data directory and user,
you have to adjust the original config, e.g.:
<programlisting>
services.bitcoind = {
enable = true;
extraConfig = "...";
...
};
</programlisting>
To something similar:
<programlisting>
services.bitcoind.mainnet = {
enable = true;
dataDir = "/var/lib/bitcoind";
user = "bitcoin";
extraConfig = "...";
...
};
</programlisting>
The key settings are:
<itemizedlist>
<listitem>
<para>
<literal>dataDir</literal> - to continue using the same data directory.
</para>
</listitem>
<listitem>
<para>
<literal>user</literal> - to continue using the same user so that bitcoind maintains access to its files.
</para>
</listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>
Graylog introduced a change in the LDAP server certificate validation behaviour for version 3.3.3 which might break existing setups.
When updating Graylog from a version before 3.3.3 make sure to check the Graylog <link xlink:href="https://www.graylog.org/post/announcing-graylog-v3-3-3">release info</link> for information on how to avoid the issue.
</para>
</listitem>
<listitem>
<para>
The <literal>dokuwiki</literal> module has changed to multi-instance, using submodules.
Therefore, it is now mandatory to name each instance. Moreover, forcing SSL by default has been dropped, so
<literal>nginx.forceSSL</literal> and <literal>nginx.enableACME</literal> are no longer set to <literal>true</literal>.
To continue using your service with the original SSL settings, you have to adjust the original config, e.g.:
<programlisting>
services.dokuwiki = {
enable = true;
...
};
</programlisting>
To something similar:
<programlisting>
services.dokuwiki."mywiki" = {
enable = true;
nginx = {
forceSSL = true;
enableACME = true;
};
...
};
</programlisting>
The base package has also been upgraded to the 2020-07-29 "Hogfather" release. Plugins might be incompatible or require upgrading.
</para>
</listitem>
<listitem>
<para>
The <xref linkend="opt-services.postgresql.dataDir"/> option is now set to <literal>"/var/lib/postgresql/${cfg.package.psqlSchema}"</literal> regardless of your
<xref linkend="opt-system.stateVersion"/>. Users with an existing postgresql install that have a <xref linkend="opt-system.stateVersion"/> of <literal>17.09</literal> or below
should double check what the value of their <xref linkend="opt-services.postgresql.dataDir"/> option is (<literal>/var/db/postgresql</literal>) and then explicitly
set this value to maintain compatibility:
<programlisting>
services.postgresql.dataDir = "/var/db/postgresql";
</programlisting>
</para>
</listitem>
<listitem>
<para>
The USBGuard module now removes options and instead hardcodes values for <literal>IPCAccessControlFiles</literal>, <literal>ruleFiles</literal>, and <literal>auditFilePath</literal>. Audit logs can be found in the journal.
</para>
</listitem>
</itemizedlist>
</section>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xi="http://www.w3.org/2001/XInclude"
version="5.0"
xml:id="sec-release-20.09-notable-changes">
<title>Other Notable Changes</title>
<itemizedlist>
<listitem>
<para>SD images are now compressed by default using <literal>zstd</literal>. The compression for ISO images has also been changed to <literal>zstd</literal>, but ISO images are still not compressed by default.</para>
</listitem>
<listitem>
<para>
<option>services.journald.rateLimitBurst</option> was updated from
<literal>1000</literal> to <literal>10000</literal> to follow the new
upstream systemd default.
</para>
</listitem>
<listitem>
<para>
The <package>notmuch</package> package move its emacs-related binaries and
emacs lisp files to a separate output. They're not part
of the default <literal>out</literal> output anymore - if you relied on the
<literal>notmuch-emacs-mua</literal> binary or the emacs lisp files, access them via
the <literal>notmuch.emacs</literal> output.
</para>
</listitem>
<listitem>
<para>
The default output of <literal>buildGoPackage</literal> is now <literal>$out</literal> instead of <literal>$bin</literal>.
</para>
</listitem>
<listitem>
<para>
<literal>buildGoModule</literal> <literal>doCheck</literal> now defaults to <literal>true</literal>.
</para>
</listitem>
<listitem>
<para>
Packages built using <literal>buildRustPackage</literal> now use <literal>release</literal>
mode for the <literal>checkPhase</literal> by default.
</para>
<para>
Please note that Rust packages utilizing a custom build/install procedure
(e.g. by using a <filename>Makefile</filename>) or test suites that rely on the
structure of the <filename>target/</filename> directory may break due to those assumptions.
For further information, please read the Rust section in the Nixpkgs manual.
</para>
</listitem>
<listitem>
<para>
The cc- and binutils-wrapper's "infix salt" and <literal>_BUILD_</literal> and <literal>_TARGET_</literal> user infixes have been replaced with with a "suffix salt" and suffixes and <literal>_FOR_BUILD</literal> and <literal>_FOR_TARGET</literal>.
This matches the autotools convention for env vars which standard for these things, making interfacing with other tools easier.
</para>
</listitem>
<listitem>
<para>
Additional Git documentation (HTML and text files) is now available via the <literal>git-doc</literal> package.
</para>
</listitem>
<listitem>
<para>
Default algorithm for ZRAM swap was changed to <literal>zstd</literal>.
</para>
</listitem>
<listitem>
<para>
The scripted networking system now uses <literal>.link</literal> files in
<literal>/etc/systemd/network</literal> to configure mac address and link MTU,
instead of the sometimes buggy <literal>network-link-*</literal> units, which
have been removed.
Bringing the interface up has been moved to the beginning of the
<literal>network-addresses-*</literal> unit.
Note this doesn't require <command>systemd-networkd</command> - it's udev that
parses <literal>.link</literal> files.
Extra care needs to be taken in the presence of <link xlink:href="https://wiki.debian.org/NetworkInterfaceNames#THE_.22PERSISTENT_NAMES.22_SCHEME">legacy udev rules</link>
to rename interfaces, as MAC Address and MTU defined in these options can only match on the original link name.
In such cases, you most likely want to create a <literal>10-*.link</literal> file through <xref linkend="opt-systemd.network.links"/> and set both name and MAC Address / MTU there.
</para>
</listitem>
<listitem>
<para>
Grafana received a major update to version 7.x. A plugin is now needed for
image rendering support, and plugins must now be signed by default. More
information can be found
<link xlink:href="https://grafana.com/docs/grafana/latest/installation/upgrading/#upgrading-to-v7-0">in the Grafana documentation</link>.
</para>
</listitem>
<listitem>
<para>
The <literal>hardware.u2f</literal> module, which was installing udev rules
was removed, as udev gained native support to handle FIDO security tokens.
</para>
</listitem>
<listitem>
<para>
The <literal>services.transmission</literal> module
was enhanced with the new options:
<xref linkend="opt-services.transmission.credentialsFile"/>,
<xref linkend="opt-services.transmission.openFirewall"/>,
and <xref linkend="opt-services.transmission.performanceNetParameters"/>.
</para>
<para>
<literal>transmission-daemon</literal> is now started with additional systemd sandbox/hardening options for better security.
Please <link xlink:href="https://github.com/NixOS/nixpkgs/issues">report</link>
any use case where this is not working well.
In particular, the <literal>RootDirectory</literal> option newly set
forbids uploading or downloading a torrent outside of the default directory
configured at <link linkend="opt-services.transmission.settings">settings.download-dir</link>.
If you really need Transmission to access other directories,
you must include those directories into the <literal>BindPaths</literal> of the service:
<programlisting>
systemd.services.transmission.serviceConfig.BindPaths = [ "/path/to/alternative/download-dir" ];
</programlisting>
</para>
<para>
Also, connection to the RPC (Remote Procedure Call) of <literal>transmission-daemon</literal>
is now only available on the local network interface by default.
Use:
<programlisting>
services.transmission.settings.rpc-bind-address = "0.0.0.0";
</programlisting>
to get the previous behavior of listening on all network interfaces.
</para>
</listitem>
<listitem>
<para>
With this release <literal>systemd-networkd</literal> (when enabled through <xref linkend="opt-networking.useNetworkd"/>)
has it's netlink socket created through a <literal>systemd.socket</literal> unit. This gives us control over
socket buffer sizes and other parameters. For larger setups where networkd has to create a lot of (virtual)
devices the default buffer size (currently 128MB) is not enough.
</para>
<para>
On a machine with &gt;100 virtual interfaces (e.g., wireguard tunnels, VLANs, …), that all have to
be brought up during system startup, the receive buffer size will spike for a brief period.
Eventually some of the message will be dropped since there is not enough (permitted) buffer
space available.
</para>
<para>
By having <literal>systemd-networkd</literal> start with a netlink socket created by
<literal>systemd</literal> we can configure the <literal>ReceiveBufferSize=</literal> parameter
in the socket options (i.e. <literal>systemd.sockets.systemd-networkd.socketOptions.ReceiveBufferSize</literal>)
without recompiling <literal>systemd-networkd</literal>.
</para>
<para>
Since the actual memory requirements depend on hardware, timing, exact
configurations etc. it isn't currently possible to infer a good default
from within the NixOS module system. Administrators are advised to
monitor the logs of <literal>systemd-networkd</literal> for <literal>rtnl: kernel receive buffer
overrun</literal> spam and increase the memory limit as they see fit.
</para>
<para>
Note: Increasing the <literal>ReceiveBufferSize=</literal> doesn't allocate any memory. It just increases
the upper bound on the kernel side. The memory allocation depends on the amount of messages that are
queued on the kernel side of the netlink socket.
</para>
</listitem>
<listitem>
<para>
Specifying <link linkend="opt-services.dovecot2.mailboxes">mailboxes</link> in the <package>dovecot2</package> module
as a list is deprecated and will break eval in 21.03. Instead, an attribute-set should be specified where the <literal>name</literal>
should be the key of the attribute.
</para>
<para>
This means that a configuration like this
<programlisting>{
<link linkend="opt-services.dovecot2.mailboxes">services.dovecot2.mailboxes</link> = [
{ name = "Junk";
auto = "create";
}
];
}</programlisting>
should now look like this:
<programlisting>{
<link linkend="opt-services.dovecot2.mailboxes">services.dovecot2.mailboxes</link> = {
Junk.auto = "create";
};
}</programlisting>
</para>
</listitem>
<listitem>
<para>
<package>netbeans</package> was upgraded to 12.0 and now defaults to OpenJDK 11. This might cause problems if your projects depend on packages that were removed in Java 11.
</para>
</listitem>
<listitem>
<para>
<package>nextcloud</package> has been updated to <link xlink:href="https://nextcloud.com/blog/nextcloud-hub-brings-productivity-to-home-office/">v19</link>.
</para>
<para>
If you have an existing installation, please make sure that you're on
<package>nextcloud18</package> before upgrading to <package>nextcloud19</package>
since Nextcloud doesn't support upgrades across multiple major versions.
</para>
<para>
The <literal>nixos-run-vms</literal> script now deletes the
previous run machines states on test startup. You can use the
<literal>--keep-vm-state</literal> flag to match the previous
behaviour and keep the same VM state between different test runs.
</para>
</listitem>
<listitem>
<para>
The <link linkend="opt-nix.buildMachines">nix.buildMachines</link> option is now type-checked.
There are no functional changes, however this may require updating some configurations to use correct types for all attributes.
</para>
</listitem>
<listitem>
<para>
The <literal>fontconfig</literal> module stopped generating fontconfig 2.10.x config and cache.
Fontconfig 2.10.x was removed from Nixpkgs - it hasn't been used in any nixpkgs package anymore.
</para>
</listitem>
<listitem>
<para>
The packages <package>perl</package>, <package>rsync</package> and <package>strace</package> were removed from <option>systemPackages</option>. If you need them, install them again with <code><xref linkend="opt-environment.systemPackages"/> = with pkgs; [ perl rsync strace ];</code> in your <filename>configuration.nix</filename>.
</para>
</listitem>
</itemizedlist>
</section>
</section>