See https://github.com/NixOS/nixpkgs/issues/106950
> They way it's worded says buildInputs are for build-time and nativeBuildInputs are for run-time. The other documentation leads me to believe it is the other way around.
The sectn and ulink hacks are not necessary since pandoc has been defaulting to Docbook 5 for a long time.
With the pandoc patches, we can get rid of id→xml:id replacement and xmlns hacks as well.
* converted texlive doc to markdown
Signed-off-by: GitHub <noreply@github.com>
* Remove frontmatter (suggestion)
Co-authored-by: Ryan Mulligan <ryan@ryantm.com>
* Add anchor (suggestion)
Co-authored-by: Ryan Mulligan <ryan@ryantm.com>
* apply suggestions from @ryantm
Signed-off-by: GitHub <noreply@github.com>
* fix nesting of codeblocks into list items as suggested by @jtojnar
Signed-off-by: GitHub <noreply@github.com>
* add anchors for subtopics as said by @jtojnar
Signed-off-by: GitHub <noreply@github.com>
Co-authored-by: Ryan Mulligan <ryan@ryantm.com>
I did double-check that the fixed version does what we would want. In
either case, the katamari script is mostly of historical value, and
there's nothing to change in pkgs.
I tested the shell snippets shown here; they work. Note that, because
they're intended for copy-and-paste, I did *not* make them into
ShellSessions with prompts. But that's something I can do if desired.
This example was confusing at first because the element the message
indicated wasn't in the list of possible values was but the possible
values didn't match up either. This ensures the example is consistent
with the logic being presented.
Each invocation of pkgs.extends adds 130MB of allocation to the hydra
evaluator. We are already struggling with the amount of memory nixpkgs
requires.
`pkgs.extend` is a useful escape-hatch, but should be not be used inside
of nixpkgs directly.
This is essentially an automatic pandoc conversion of the weechat
section in docbook as part of the larger CommonMark Docs project
(https://github.com/NixOS/nixpkgs/projects/37)
fixes#105264
Update doc/builders/packages/weechat.section.md
Co-authored-by: Frederik Rietdijk <freddyrietdijk@fridh.nl>
Update doc/builders/packages/weechat.section.md
Co-authored-by: Jan Tojnar <jtojnar@gmail.com>
* Updated QT section
* Fixed trailing whitespace
* Update doc/languages-frameworks/qt.section.md
Co-authored-by: Jan Tojnar <jtojnar@gmail.com>
* Update doc/languages-frameworks/qt.section.md
Co-authored-by: Jan Tojnar <jtojnar@gmail.com>
* Made changes to docs as per jtojnar's review
* Added docbook tags for callouts back in
Co-authored-by: Jan Tojnar <jtojnar@gmail.com>
With the addition of ruby.withPackages, manveru rewrote the nixpkgs
manual section for the ruby language but did not add it to the manual.
This commit replaces the previous documentation with manveru's updated
version.
Adding them to `maintainers/maintainer-list` in a separate commit.
Co-Authored-By: Pavol Rusnak <pavol@rusnak.io>
Co-Authored-By: Atemu <atemu.main@gmail.com>
Co-Authored-By: Kevin Cox <kevincox@kevincox.ca>
Add nice markdown documentation for how to use mvn2nix plugin and the
buildMaven function within nixpkgs.
Update doc/languages-frameworks/maven.md
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Apply suggestions from code review
Co-authored-by: Doron Behar <doron.behar@gmail.com>
Apply suggestions from code review
Co-authored-by: Doron Behar <doron.behar@gmail.com>
Apply suggestions from code review
Co-authored-by: Doron Behar <doron.behar@gmail.com>
The previous implementation of plugin-support for the kakoune derivation
was based on generating, at build time, a `plugins.kak` file that would
source all .kak files in the list of plugins, and wrap the `kak` binary
in a script that would add some command-line arguments so that this
file gets loaded on start-up. The main problem with this approach
is that the plugins' code get executed *after* the user's configuration
file is loaded, so effectively one cannot automatically activate/configure
these plugins.
The idiomatic way of loading plugins is ensuring they end up installed
somwhere under `share/kak/autoload`. Because plugins are already being
packaged to have their code in `share/kak/autoload/plugins/<name-of-plugin>`,
we can obtain a derivation that includes the plugins simply by doing a
`symlinkJoin` of `kakoune-unwrapped` and all the requested plugins.
For this to work, we need to fix two issues:
1. By default, kakoune makes `share/kak/autoload` a symbolic link to
`share/kak/rc`, which contains all builtin definitions. We need
to patch this to put the symlink under `share/kak/autoload/rc`, so that
the join works.
2. By default kakoune expects the `autoload` directory to be in
`../share/kak/autoload` relative to the location of the `kak` binary.
We need to set the `KAKOUNE_RUNTIME` to point the symlinked
share/kak for this to work.
This is a mostly cosmetical commit, in the sense it doesn't change the contents
of any package, but reorganizes the overall Nixpkgs expressions.
Terminal emulators are an ubiquitous tool for any Unix user; even the beginners
are routinely familiarized to it. And, manifestly, there are many
implementations of terminal emulators out there, from those traditionally made
in C and C++ to those written in Haskell and Go.
Terminal emulators deserve more highlight. This commit does that by creating a
category for them.
I made a mistake merge. Reverting it in c778945806 undid the state
on master, but now I realize it crippled the git merge mechanism.
As the merge contained a mix of commits from `master..staging-next`
and other commits from `staging-next..staging`, it got the
`staging-next` branch into a state that was difficult to recover.
I reconstructed the "desired" state of staging-next tree by:
- checking out the last commit of the problematic range: 4effe769e2
- `git rebase -i --preserve-merges a8a018ddc0` - dropping the mistaken
merge commit and its revert from that range (while keeping
reapplication from 4effe769e2)
- merging the last unaffected staging-next commit (803ca85c20)
- fortunately no other commits have been pushed to staging-next yet
- applying a diff on staging-next to get it into that state
Teach installShellCompletion how to install completions from a named
pipe. Also add a convenience flag `--cmd NAME` that synthesizes the name
for each completion instead of requiring repeated `--name` flags.
Usage looks something like
installShellCompletion --cmd foobar \
--bash <($out/bin/foobar --bash-completion) \
--fish <($out/bin/foobar --fish-completion) \
--zsh <($out/bin/foobar --zsh-completion)
Fixes#83284
Move common attributes treated by both buildGoModule and buildGoPackage
to a separate section, out of the examples' "callouts".
Co-authored-by: zowoq <59103226+zowoq@users.noreply.github.com>
This hook moves systemd user service file from `lib/systemd/user` to
`share/systemd/user`. This is to allow systemd to find the user
services when installed into a user profile. The `lib/systemd/user`
path does not work since `lib` is not in `XDG_DATA_DIRS`.
Pull #89453 introduced a bug in the documentation that is preventing the
hydra build for nixpkgs-unstable from finishing. I have added the
additional option indroduced in that patch (runVend for go modules) and
added the callout tag so that the documenation can build again.
In #89806 it has been reported that the final package is missing a lot
of features like support for the self-service GUI and the
config-management.
While working on supporting those components in the Nix-package, I
decided to refactor the package to simplify the entire setup.
This patch changes the following things:
* Binaries and libraries are patched using the `autoPatchelfHook` to
avoid having unneeded libraries linked (e.g. some programs use gtk2,
others use gtk3).
* Moved source-declarations into their own file.
* Wrapped `configmgr` and `selfservice` and added those to `$out/bin`.
* Don't mention the old `citrix_receiver`-packages in the manual anymore
since those packages were removed in 19.09 and are EOLed anyways.
Closes#89806
/build/doc/manual-full.xml:12764:35: error: ID "build-phase" has already been defined
/build/doc/manual-full.xml:9029:33: error: first occurrence of ID "build-phase"
We no longer need it for most use cases so I am making it experimental.
I have something in mind where it might be useful in the future (customizing commit messages)
but for now, it would only confuse people.
Instead of having the updateScript support returning JSON object,
it should be sufficient to specify attrPath in passthru.updateScript.
It is much easier to use.
The former is now considered experimental.
Update scripts can now declare features using
passthru.updateScript = {
command = [ ../../update.sh pname ];
supportedFeatures = [ "commit" ];
};
A `commit` feature means that when the update script finishes successfully,
it will print a JSON list like the following:
[
{
"attrPath": "volume_key",
"oldVersion": "0.3.11",
"newVersion": "0.3.12",
"files": [
"/path/to/nixpkgs/pkgs/development/libraries/volume-key/default.nix"
]
}
]
and data from that will be used when update.nix is run with --argstr commit true
to create commits.
We will create a new git worktree for each thread in the pool and run the update
script there. Then we will commit the change and cherry pick it in the main repo,
releasing the worktree for a next change.
This adds the `validatePkgConfig` hook, which can be used to validate
pkg-config files in the output(s). Currently, this will just run
`pkg-config --validate` on all `.pc` files, capturing errors such as
the issue that was fixed in #87789.
The hook could be extended in the future with more fine-grained
checks.
Based on some feedback in #87094 and discussion with @fridh, this re-organizes
the onboarding tutorial in the Nixpkgs manual's python section, so that we start
with the simplest, most ad-hoc examples and work our way up. This progresses
from:
1. How to create an temporary python env at the cmdline, then
2. How to create a specific python env for a single script, then
3. How to create a specific python env for a project in a shell.nix, then
4. How to install a specific python env globally on the system or in a user profile.
Additionally, I've tried to standardize on some of the "best practice" ways of
doing things:
1. Instead of saying that this command style is "supported but strongly not
discouraged", I've just deleted it to avoid confusion.
Bad: nix-shell -p python38Packages.numpy python38Packages.toolz
Good: nix-shell -p 'python38.withPackages(ps: with ps; [ numpy toolz ])'
2. In the portion where we show how to add stuff to the user's
`XDG_CONFIG_HOME`, use overlays instead of `config.nix`. The former can do
everything the latter can do, but is also much more generic and powerful,
because it can compose with other files, compose with other envs, compose
with overlays that do things like swap whether tensorflow and pytorch are
built openblas/mkl/cuda stacks, and so on. The user is eventually going to
see the overlay, so to avoid confusion let's standardize on it.
An overlay by any other name would function just as well, but we generally use
`self: super:` for the regular overlays, and `python-self: python-super`.
Since the introduction of php.unwrapped there's no real need for the
phpXXbase attributes, so let's remove them to lessen potential
confusion and clutter. Also update the docs to make it clear how to
get hold of an unwrapped PHP if needed.
Rework withExtensions / buildEnv to handle currently enabled
extensions better and make them compatible with override. They now
accept a function with the named arguments enabled and all, where
enabled is a list of currently enabled extensions and all is the set
of all extensions. This gives us several nice properties:
- You always get the right version of the list of currently enabled
extensions
- Invocations chain
- It works well with overridden PHP packages - you always get the
correct versions of extensions
As a contrived example of what's possible, you can add ImageMagick,
then override the version and disable fpm, then disable cgi, and
lastly remove the zip extension like this:
{ pkgs ? (import <nixpkgs>) {} }:
with pkgs;
let
phpWithImagick = php74.withExtensions ({ all, enabled }: enabled ++ [ all.imagick ]);
phpWithImagickWithoutFpm743 = phpWithImagick.override {
version = "7.4.3";
sha256 = "wVF7pJV4+y3MZMc6Ptx21PxQfEp6xjmYFYTMfTtMbRQ=";
fpmSupport = false;
};
phpWithImagickWithoutFpmZip743 = phpWithImagickWithoutFpm743.withExtensions (
{ enabled, all }:
lib.filter (e: e != all.zip) enabled);
phpWithImagickWithoutFpmZipCgi743 = phpWithImagickWithoutFpmZip743.override {
cgiSupport = false;
};
in
phpWithImagickWithoutFpmZipCgi743
only very few people followed the strict policy in the last 5 years. the
maintainers accept backports without reason when it's obvious, so i
updated the policy to reflect that
* ghcHEAD: bump to 8.11.20200403
* ghcHead: reduce diff vs. 8.10.1
dontAddExtraLibs was removed by accident (IMO) in ea19a8ed1e
* ghcHEAD: add ability to use system libffi
- enable nixpkgs' libffi
- minimise diffs against 8.10.1
- remove patching
* remove configure warning about --with-curses-includes
configure: WARNING: unrecognized options: --with-curses-includes
This provides a means to build a PHP package based on a list of
extensions from another.
For example, to generate a package with all default extensions
enabled, except opcache, but with ImageMagick:
php.withExtensions (e:
(lib.filter (e: e != php.extensions.opcache) php.enabledExtensions)
++ [ e.imagick ])
So now we have only packages for human interaction in php.packages and
only extensions in php.extensions. With this php.packages.exts have
been merged into the same attribute set as all the other extensions to
make it flat and nice.
The nextcloud module have been updated to reflect this change as well
as the documentation.
- Use git.Repo(ROOT, search_parent_directories=True) to find nixpkgs
repo.
- Don't commit overrides.nix.
- Remove "-a" short argument.
- Remove "--commit" flag and commit by default.
- Improve help/error messages.
- Favor closure pattern over classes.Use a closure to wrap the update
function with state rather than a callable class.
- break NixpkgsRepo class into functions
- Optional None-type arguments
- Remove repo checks from update.py. Git is too flexible and permits too
many workflows for my attempt to replace documentation with code to work.
My goal would be to separate the `--add` functionality from the update
functionality in the near term and then there will be no reason for this
usage to create commits anyway.
This reverts commit 5e8545e723.
It breaks eval:
attribute 'rev' missing, at /var/lib/ofborg/checkout/repo/38dca4e3aa6bca43ea96d2fcc04e8229/mr-est/eval-0-gleber.ewr1.nix.ci/pkgs/top-level/make-tarball.nix:106:39
I din't try to pinpoint the exact commit, but we started getting:
> The extension smart is not supported for docbook
Reading pandoc docs, I can't see what use to us "smart" could be
when writing the in-between docbook (to be converted to html).
https://pandoc.org/MANUAL.html#extension-smart
Previously, we would asssert that the lockfiles are consistent during the
unpackPhase, but if the pkg has a patch for the lockfile itself then we must
wait until the patchPhase is complete to check.
This also removes an implicity dependency on the src attribute coming from
`fetchzip` / `fetchFromGitHub`, which happens to name the source directory
"source". Now we glob for it, so different fetchers will work consistently.
This has several advantages:
1. It takes up less space on disk in-between builds in the nix store.
2. It uses less space in the binary cache for vendor derivation packages.
3. It uses less network traffic downloading from the binary cache.
4. It plays nicely with hashed mirrors like tarballs.nixos.org, which only
substitute --flat hashes on single files (not recursive directory hashes).
5. It's consistent with how simple `fetchurl` src derivations work.
6. It provides a stronger abstraction between input src-package and output
package, e.g., it's harder to accidentally depend on the src derivation at
runtime by referencing something like `${src}/etc/index.html`. Likewise, in
the store it's harder to get confused with something that is just there as a
build-time dependency vs. a runtime dependency, since the build-time
src dependencies are tarred up.
Disadvantages are:
1. It takes slightly longer to untar at the start of a build.
As currently implemented, this attaches the compacted vendor.tar.gz feature as a
rider on `verifyCargoDeps`, since both of them are relatively newly implemented
behavior that change the `cargoSha256`.
If this PR is accepted, I will push forward the remaining rust packages with a
series of treewide PRs to update the `cargoSha256`s.
No material changes to docs, but trying to sanitize them for consistent
readability prior to looking at #75837.
- Use `*` for lists instead of `-`. I have no opinion one way or the other, but
the latter was only used in 1-2 places.
- Pad the code blocks with whitespace.
- Wrap to 80 characters, except for a few 1-liners that were only slightly over.
When updating the section to python 3 some places still
referred to pythonPackages and were overlooked.
Decided to switch it to be more similar to the first
example binding pythonPackages and clarified comments a
bit based on confusion I observed on IRC.
Related to https://github.com/NixOS/nixpkgs/pull/77569
Updating section about imperative use of ad-hoc virtual-environments for
use of pythons built-in `venv` module via venvShellHook. Also trying to
make it a bit friendlier to beginners by adding a bit more explanation
to the code snippet and some remarks old-school virtualenv.
Adjusting for venvShellHook and adding manual example
Adding pip install and replacing python2 example with python3
When modSha256 is null, disable the nix sandbox instead of using a
fixed-output derivation. This requires the nix-daemon to have
`sandbox = relaxed` set in their config to work properly.
Because the output is (hopefully) deterministic based on the inputs,
this should give a reproducible output. This is useful for development
outside of nixpkgs where re-generating the modSha256 on each mod.sum
changes is cumbersome.
Don't use this in nixpkgs! This is why null is not the default value.
We shouldn’t force the user to have a C compiler in scope, just
because the derivation is forced to build locally. That can’t be
counted as “lightweight” anymore.
Co-Authored-By: Silvan Mosberger<contact@infinisil.com>
This has the same motivation as fetchFromGitHub/fetchFromGitLab --
it's cheaper to download a tarball of a single revision than it is to
download a whole history.
I could have gone with domain/group/repo, like fetchFromGitLab, but it
would have made implementation more difficult, and this syntax means
it's a drop-in replacement for fetchgit, so I decided it wasn't worth
it.
The package set is not maintained. It is also not used by most of the
BEAM community. Removing it to allow a more useful set of tools fit to
the BEAM community in Nixpkgs.
