* nixos/tor: add hiddenServices option
This change allows to configure hidden services more conveniently.
* nixos/tor: fix default/example mixup
* nixos/tor: use docbook in documentation
Also use more elegant optionalString for optional strings.
* tor: seperate hidden service port by newline
* tor: better example for hidden service path
a path below /var/lib/tor is usually used for hidden services
The PAM service name used before this commit was "sambda", with an
extra 'd'. For some reason I don't quite fully understand this typo
prevents GDM from starting. This change fixes that as tested in VMs
built using "nixos-rebuild -I nixpkgs=<mypkgs> build-vm".
```Tinc```'s pid file has more info than just a pid
```
# cat /run/tinc.dmz.pid
12209 7BD4A657B4A04364D268D188A0F4AA972A05247D802149246BBE1F1E689CABA1 127.0.0.1 port 656
```
so ```systemd``` fails to parse it.
It results in long (re)start times when ```systemd``` waits for a correct pid file to appear.
Do the right thing, and use multiple interfaces for policy routing. For example, WireGuard interfaces do not allow multiple routes for the same CIDR range.
Fixes https://github.com/NixOS/nixpkgs/issues/27996.
Updates instructions for generating hashes passwords for use in a
Mosquitto password file. Using `mosquitto_passwd` to generate these
hashes is a little less convenient, but the results are more likely to
be compatible with the mosquitto daemon.
As far as I can tell, the hashes generated with `mkpassd` did not work
as intended. But this may have been hidden by another bug:
https://github.com/NixOS/nixpkgs/issues/27130.
This adds a convenient per-peer option to set the routing table that associated routes are added to. This functionality is very useful for isolating interfaces from the kernel's global routing and forcing all traffic of a virtual interface (or a group of processes, via e.g. "ip rule add uidrange 10000-10009 lookup 42") through Wireguard.
The piwki setup documentation as it stands has two issues:
- the `ALTER USER root` line does not work with MariaDB or MySQL 5.5
- the auth plugin details vary between MariaDB and MySQL
enableUpstreamMimeTypes controls whether to include the list of mime
types bundled with lighttpd (upstream). This option is enabled by
default and gives a much more complete mime type list than we currently
have. If you disable this, no mime types will be added by NixOS and you
will have to add your own mime types in services.lighttpd.extraConfig.
* mod_dirlisting is auto-loaded by lighttpd and should not be explicitly
loaded in the configuration file.
* The rest comes from looking at "ls -1 $lighttpd/lib/*.so" when
lighttpd is built with "enableMagnet" and "enableMysql".
Exhibitor tests the auto-manage-instances config value to see if it's a
non-zero integer, rather than a true/false string, which was getting
put into the config before. This now causes autoManageInstances to
behave correctly.
Checking the keyboard layout has been a long set of hurdles so far, with
several attempts. Originally, the checking was introduced by @lheckemann
in #23709.
The initial implementation just was trying to check whether the symbols/
directory contained the layout name.
Unfortunately, that wasn't enough and keyboard variants weren't
recognized, so if you set layout to eg. "dvorak" it will fail with an
error (#25526).
So my improvement on that was to use sed to filter rules/base.lst and
match the layout against that. I fucked up twice with this, first
because layout can be a comma-separated list which I didn't account for
and second because I ran into a Nix issue (NixOS/nix#1426).
After fixing this, it still wasn't enough (and this is btw. what
localectl also does), because we were *only* matching rules but not
symbols, so using "eu" as a layout won't work either.
I decided now it's the time to actually use libxkbcommon to try
compiling the keyboard options and see whether it succeeds. This comes
in the form of a helper tool called xkbvalidate.
IMHO this approach is a lot less error-prone and we can be sure that we
don't forget about anything because that's what the X server itself uses
to compile the keymap.
Another advantage of this is that we now validate the full set of XKB
options rather than just the layout.
Tested this against a variety of wrong and correct keyboard
configurations and against the "keymap" NixOS VM tests.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @lheckemann, @peti, @7c6f434c, @tohl, @vcunat, @lluchs
Fixes: #27597
- Remove useless escape of question mark
- Fix and quoting
- Add some '&&s' for correctness
- Add escapeShellArg
- Remove &&s in preStart
Edited by grahamc: fixed the ${} typo on line 246
The previous package didn't build properly due to a bug in the build
script, and the nixos module didn't evaluate due to missing descriptions
in the options. This fixes both issues.
It also adds missing command-line options that weren't able to be set
and properly converts bools to the strings exhibitor expects.
Syntax errors prevented important parameters from being passed to
oauth2_proxy, which could have permitted unauthorised access to
services behind the proxy.
The systemd service file shipped with strongswan has strongswan started after `network-online`. It turns out that this is for good reason: failure to connect on boot otherwise.
See this thread on the mailing list, which my colleague initiated after finding that our NixOS strongswan config wouldn't connect on boot:
https://lists.strongswan.org/pipermail/users/2017-January/010359.html
Tested on a local config (which has the strongswan service config overridden).
The helper tool had a very early check whether the automatically created
CA key/cert are available and thus it would abort if the key was
unavailable even though we don't need or even want to have the CA key.
Unfortunately our NixOS test didn't catch this, because it was just
switching from a configuration with an automatically created CA to a
manual configuration without deleting the generated keys and certs.
This is done now in the tests and it's also fixed in the helper tool.
Reported-by: @jpotier
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The current behavior was for gitlab-runner is to immediately terminate when there
was a restart required. This can lead to aborted builds and is annoying to users.
By enabling graceful mode gitlab-runner will wait for all builds to finish before
terminating. The disadvantage is that a nixos-rebuild switch needs to wait till
all jobs are done. Because of that it is not enabled by default.
* lib: introduce imap0, imap1
For historical reasons, imap starts counting at 1 and it's not
consistent with the rest of the lib.
So for now we split imap into imap0 that starts counting at zero and
imap1 that starts counting at 1. And imap is marked as deprecated.
See c71e2d4235 (commitcomment-21873221)
* replace uses of lib.imap
* lib: move imap to deprecated.nix
Regression introduced by 44c64fef16.
The services.xserver.layout option allows to specify more than one
layout separated by comma, which the commit above didn't take into
account.
This is very similar to @lheckemann's pull request (#26984) but differs
in the following ways:
* Print out the full list available layouts (as suggested by @0xABAB
in [1]).
* Loop over $layout using the default IFS (and thus no need for
escaping ${cfg.layout}), because the layouts won't contain white
spaces.
* Re-do the error message, which now uses multiple echos instead of a
heredoc, so the line is wrapped according to the viewers terminal
width.
I've tested this with several good and bad layouts and also against the
keymap NixOS VM subtests.
[1]: https://github.com/NixOS/nixpkgs/pull/26984#discussion_r125146700
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Fixes: #26961Closes: #26984
* removed pid-file support, it is needless to run collectd as systemd service
* removed static user id, as all the files reowned on the service start
* added ambient capabilities for ping and smart (hdd health) functions
- Update to version 1.3.0
- Remove dependency on `oxygen-icons5`, as Lumina desktop now distributes
it’s own "material-design-[light/dark]" icon themes and uses them as the
default icon sets.
First of all, thanks to @pbogdan for getting this problem reproduced:
https://github.com/NixOS/nixpkgs/commit/2014db3efcd2a#commitcomment-22815396
Also thanks to @vcunat for bringing this to my attention:
https://github.com/NixOS/nixpkgs/commit/44c64fef16ed5#commitcomment-22813503
Although it is not entirely clear why Nix has killed the build prior to
finishing, it seems to be related to the process substition I was using.
So instead of using "exec touch", let's wrap this inside an if so we
don't exit too early.
Tested this against all sub-tests in nixos/tests/keymap.nix and also a
few configurations with wrong keyboard layout definitions.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Enumerating the symbols directory doesn't include variants, so we're now
basically doing what "localectl list-x11-keymap-layouts" does but we use
sed instead.
The reason I'm not using localectl directly is because the path to
rules/base.lst is hardcoded in the systemd source.
Of course, the XKB specification allows for much more complicated rules,
but at least this should cover the most basic ones including variants.
So the sed expression itself is just for listing the available layouts
and variants and we use a grep with -xF to match only full lines without
interpreting regular expressions.
This should again allow to set "dvorak" as the layout option.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @lheckemann
Fixes: #25526
Plugin and QML import paths were previously determined by NIX_PROFILES. Using
PATH instead allows Qt applications to work under nix-shell without further
modification.
- Reduce environment pollution with a separate $bin output containing programs,
plugins, and shared data. Libraries remain in $out and are not installed into
the environment.
- Only propagate build inputs as required.
nsd by default logs _both_ to syslog and to standard error which results
in all the messages ending up in the journal twice, the ones from stderr
with an ugly timestamp sticked in front of them.
* Add kibana5 and logstash5
* Upgrade the elastic beats to 5.4
* Make sure all elastic products use the same version
(see elk5Version)
* Add a test for the ELK stack
This adds configuration options for the bind package so that the
interfaces that bind listens on can be configured rather than just
hardcoded as any. The default values preserve the old behavior to be
backwards compatible.
Restructure the nixos-artwork to make it easy to selectively
incorporate other components from upstream without needing to download
the full package.
Until now only the Gnome_Dark wallpaper was included. Add other
wallpapers available in the package repository.
* postgresql service: make 9.6 the default version for 17.09
* postgresql service: change default superuser for 17.09
Change the default superuser from `root` to `postgres` for state
version 17.09
* postgresql service: change default data directory for 17.09
The new directory includes the schema version of the database.
This makes upgrades easier and is more consistent with other distros.
* updated nixos release notes
While systemd suggests using the pre-defined graphical-session user
target, I found that this interface is difficult to use. Additionally,
no other major distribution, even in their unstable versions, currently
use this mechanism.
The window or desktop manager is supposed to run in a systemd user service
which activates graphical-session.target and the user services that are
binding to this target. The issue is that we can't elegantly pass the
xsession environment to the window manager session, in particular
whereas the PassEnvironment option does work for DISPLAY, it for some
mysterious reason won't for PATH.
This commit implements a new graphical user target that works just like
default.target. Services which should be run in a graphical session just
need to declare wantedBy graphical.target. The graphical target will be
activated in the xsession before executing the window or display manager.
Fixes#17858.
* tinc: Mention in docs that the host name may not be used verbatim.
Source:
5c344f2976/src/net_setup.c (L341)
* tinc: also replaces non-alphanumeric characters.
