In fd9eb16b24, the option
"services.nextcloud.nginx.enable" has been removed since the module now
exclusively supports nginx only.
Unfortunately, with the option gone from the manual, the link in the
Nextcloud-specific documentation referencing the NixOS option also
became a dead link and thus the manual will no longer build.
I also removed a second reference to this option in the Nextcloud-
specific documentation, which while it doesn't lead to a build error in
the manual is nevertheless a good idea to remove as well to ensure we
don't present outdated information to readers of the manual.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @DavHau, @Ma27
The missing () caused parts of the escripts to be added to the
ExecStartPost line instead of inside the script.
This caused postgresql start to fail under certain conditions.
- remove optons cfg.user, cfg.groups
- add option `serverUser` which is required when not using nginx
- add `serverUser` to nextcloud group
- set user/group to "nextcloud" for nextcloud services
- make setup-service non-root
There are circumstances where running secondary DHCP servers in
non-authoritative mode is advantageous. Retain the previous
authoritative behavior as a default.
* Update: https://gitlab.freedesktop.org/pwithnall/malcontent/-/releases/0.8.0
* Fix the separation patch.
* Add `itstool` to ui (needed for building localized help).
* Use `pkg-config` instead of the `pkgconfig` alias.
* Fix some issues related to multiple outputs:
* Make the module pass specific output to `dbus.packages` since the `dbus` NixOS module will not generate configuration with correct interface paths otherwise.
* Change `malcontent-ui` package to primarily-a-program type derivation (`out`+`lib` instead of `bin`+`out`) since there are more and more `malcontent-control`-specific assets.
* This also fixes the issue where application data (desktop files, icons…) were installed to `out`, which is not installed by `environment.systemPackages`/`system-path.nix`’s `buildEnv` by default when `bin` output is also present.
* Make `malcontent` package install `out` output too so that `system-path.nix` links that too. It contains the AccountsService & Polkit data files.
* Split the library and PAM module out of `malcontent.out` so that they are not installed with the data files.
* This revealed a bug in the `gobject-introspection` setup hook.
This is necessary for VPNs where some of the nodes run pre-1.1 versions.
Most of Linux distros [0] and even the nixpkgs.tinc attribute run on that
version, so it might be useful to have that option.
[0] https://repology.org/project/tinc/versions
The resilio module places the directoryRoot configuration in the webui
section. However, the generated configuration fails on the current
version of Resilio Sync with:
Invalid key context: 'directory_root' must be in global config section
This change places this key in the global configuration section to
solve this error.
Build error introduced in fe7053f75a912197f312d890740dd3bdde0ed994:
parser error : Opening and ending tag mismatch: commmand line 6139 and command
escription><para>Base64 preshared key generated by <commmand>wg genpsk</command>
^
Writing "command" with only two "m" fixes building the NixOS manual.
Signed-off-by: aszlig <aszlig@nix.build>
> WARNING: PID file creation will be removed in Sidekiq 6.0, see #4045.
Please use a proper process supervisor to start and manage your
services
Since NixOS uses a proper process supervisor AND does not use the PID
file anywhere, we can just drop it to be upwards compatible and fix that
warning.
This adds yubikey-agent as a package and a nixos module.
On macOS, we use `wrapProgram` to set pinentry_mac as default in PATH;
on Linux we rely on the user to set their preferred pinentry in PATH.
In particular, we use a systemd override to prefix PATH to select a
chosen pinentry program if specified.
On Linux, we need libnotify to provide the notify-send utility for
desktop notifications (such as "Waiting for Yubikey touch...").
This might work on other flavors of unix, but I haven't tested.
We reuse the programs.gnupg.agent.pinentryFlavor option for
yubikey-agent, but in doing so I hit a problem: pinentryFlavour's
default value is specified in a mkDefault, but only conditionally. We
ought to be able to pick up the pinentryFlavour whether or not gpg-agent
is running. As a result, this commit moves the default value to the
definition of programs.gnupg.agent.enable.
This reverts commit d3a26a5ecd.
Using ServiceConfig.ExecStart instead of script lead to the content not
being executed in a shell anymore, which broke the secrets being read
from a file and passed as a command line parameter.
In the current implementation, there's no possibility to modify the default
parameter for keepalive. This is a number that indicates how frequently
keepalive messages should be sent from the worker to the buildmaster,
expressed in seconds. The default (600) causes a message to be sent to
the buildmaster at least once every 10 minutes.
If the worker is behind a NAT box or stateful firewall, these messages
may help to keep the connection alive: some NAT boxes tend to forget about
a connection if it has not been used in a while. When this happens, the
buildmaster will think that the worker has disappeared, and builds will
time out. Meanwhile the worker will not realize than anything is wrong.
`sslCACert` was used for trust store of client and server certificates. Since `smtpd_tls_ask_ccert` defaults to no the setup of `smtpd_tls_CApath` was removed.
>By default (see smtpd_tls_ask_ccert), client certificates are not requested, and smtpd_tls_CApath should remain empty.
see http://www.postfix.org/postconf.5.html#smtpd_tls_CAfile
Currently the service doesn't detect if on of the packages is updated
and doesn't restart.
By manually adding a trigger we make sure the service restarts if any of
the involved packages update.
In certain cases, for example when custom OpenLDAP modules are
compiled into the binary, users may want to override the package used
for OpenLDAP.
This is especially common in setups where LDAP is the primary
authentication source, as good password hashing mechanisms need to be
enabled as extra modules.
We remove the configFile build flag override in the NixOS module.
Instead of embedding the conf file link to the binaries, we symlink it
to /etc/nsd/nsd.nix, the hardcoded config file location for the
various CLI nsd utilities.
This config file build option override is triggerring a nsd rebuild
for each configuration change. This prevent us to use the nixos cache
in many cases.
Co-authored-by: Erjo <erjo@cocoba.work>
Enhance the heuristics to make sure that a user doesn't accidentally
upgrade across two major versions of Nextcloud (e.g. from v17 to v19).
The original idea/discussion has been documented in the nixpkgs manual[1].
This includes the following changes:
* `nextcloud19` will be selected automatically when having a stateVersion
greater or equal than 20.09. For existing setups, the package has to
be selected manually to avoid accidental upgrades.
* When using `nextcloud18` or older, a warning will be thrown which recommends
upgrading to `nextcloud19`.
* Added a brief paragraph about `nextcloud19` in the NixOS 19.09 release
notes.
* Restart `phpfpm` if the Nextcloud-package (`cfg.package`) changes[2].
[1] https://nixos.org/nixos/manual/index.html#module-services-nextcloud-maintainer-info
[2] https://github.com/NixOS/nixpkgs/pull/89427#issuecomment-638885727
This option exposes the prefconfigured nextcloud-occ
program. nextcloud-occ can then be used in other systemd services or
added in environment.systemPackages.
The nextcloud test shows how it can be add in
environment.systemPackages.
- Add serve.enable option, which configures uwsgi and nginx to serve
the mailman-web application;
- Configure services to log to the journal, where possible. Mailman
Core does not provide any options for this, but will now log to
/var/log/mailman;
- Use a unified python environment for all components, with an
extraPackages option to allow use of postgres support and similar;
- Configure mailman's postfix module such that it can generate the
domain and lmtp maps;
- Fix formatting for option examples;
- Provide a mailman-web user to run the uwsgi service by default
- Refactor Hyperkitty's periodic jobs to reduce repetition in the
expressions;
- Remove service dependencies not related to functionality included in
the module, such as httpd -- these should be configured in user config
when used;
- Move static files root to /var/lib/mailman-web-static by default. This avoids
permission issues when a static file web server attempts to access
/var/lib/mailman which is private to mailman. The location can still
be changed by setting services.mailman.webSettings.STATIC_ROOT;
- Remove the webRoot option, which seems to have been included by
accident, being an unsuitable directory for serving via HTTP.
- Rename mailman-web.service to mailman-web-setup.service, since it
doesn't actually serve mailman-web. There is now a
mailman-uwsgi.service if serve.enable is set to true.
Since Buildbot 0.9.0, status targets were deprecated and ignored.
There's a very small line on startup explaining that, and status simply
isn't reported. Avoid others the same headaches, and do it right in the
NixOS module.
As there might have been changes in the way reporters are organized, and
configuration might need to be migrated remove the old option, and not
just provide an alias.
