Since version 5.2.0 there's non-empty stop phase:
ExecStopPost=/usr/bin/env rm -f "/run/knot-resolver/control/%i"
but it's perfectly OK to run that from a different version
(and typically it's no-op anyway). Real-life example where this helps:
https://github.com/NixOS/nixpkgs/issues/49528#issuecomment-747723198
This reverts commit 8f177612b1.
Attempting to start any service from udev when systemd-udev-settle is
used at all hangs the boot for 2min. See issue #107341.
It's very surprising that services.tor.client.enable would set
services.privoxy.enable. This violates the principle of least
astonishment, because it's Privoxy that can integrate with Tor, rather
than the other way around.
So this patch moves the Privoxy Tor integration to the Privoxy module,
and it also disables it by default. This change is documented in the
release notes.
Reported-by: V <v@anomalous.eu>
Dnscrypt-proxy needs some options to be set before it can do anything useful.
Currently, we only apply what the user configured which, by default, is nothing.
This leads to the dnscrypt-proxy2 service failing to start when you only set
`enable = true;` which is not a great user experience.
This patch makes the module take the example config from the upstream repo as a
base on top of which the user-specified settings are applied (it contains sane
defaults).
An option has been added to restore the old behaviour.
Unbound throws the following error:
--8<---------------cut here---------------start------------->8---
error: failed to list interfaces: getifaddrs: Address family not supported by protocol
fatal error: could not open ports
--8<---------------cut here---------------end--------------->8---
The solution is pulled from upstream:
https://github.com/NLnetLabs/unbound/pull/351
This simplifies testing changes to the tailscale service on a local
machine. You can use this as such:
```nix
let
tailscale_patched = magic {};
in {
services.tailscale = {
enable = true;
package = tailscale_patched;
};
};
```
Signed-off-by: Christine Dodrill <me@christine.website>
This resolves issue #101963.
When the service is started and no interface is ready yet, wpa_supplicant
is being exec'd with no `-i` flags, thus failing. Once the interfaces
are ready, the udev rule would fire but wouldn't restart the unit because
it wasn't currently running (see systemctl(1) try-restart).
The solution is to exit (with a clear error message) but always restart
wpa_supplicant when the interfaces are modified.
Other units depend on nss-lookup.target and expect the DNS resolution to
work once that target is reached. The previous version
`wants=nss-lookup.target` made this unit require the nss-lookup.target
to be reached before this was started.
Another change that we can probalby do is drop the before relationship
with the nss-lookup.target. That might just be implied with the current
version.
This option allows users to specify a local UNIX control socket to
"remote control" the daemon. System users, that should be permitted to
access the daemon, must be in the `unbound` group in order to access the
socket. When a socket path is configured we are also creating the
required group.
Currently this only supports the UNIX socket mode while unbound actually
supports more advanced types. Users are still able to configure more
complex scenarios via the `extraConfig` attribute.
When this option is set to `null` (the default) it doesn't affect the
system configuration at all. The unbound defaults for control sockets
apply and no additional groups are created.
Previously we just applied a very minimal set of restrictions and
trusted unbound to properly drop root privs and capabilities.
With this change I am (for the most part) just using the upstream
example unit file for unbound. The main difference is that we start
unbound was `unbound` user with the required capabilities instead of
letting unbound do the chroot & uid/gid changes.
The upstream unit configuration this is based on is a lot stricter with
all kinds of permissions then our previous variant. It also came with
the default of having the `Type` set to `notify`, therefore we are also
using the `unbound-with-systemd` package here. Unbound will start up,
read the configuration files and start listening on the configured ports
before systemd will declare the unit "running". This will likely help
with startup order and the occasional race condition during system
activation where the DNS service is started but not yet ready to answer
queries.
Aditionally to the much stricter runtime environmet I removed the
`/dev/urandom` mount lines we previously had in the code (that would
randomly fail during `stop`-phase).
The `preStart` script is now only required if we enabled the trust
anchor updates (which are still enabled by default).
Another beneefit of the refactoring is that we can now issue reloads via
either `pkill -HUP unbound` or `systemctl reload unbound` to reload the
running configuration without taking the daemon offline. A prerequisite
of this was that unbound configuration is available on a well known path
on the file system. I went for /etc/unbound/unbound.conf as that is the
default in the CLI tooling which in turn enables us to use
`unbound-control` without passing a custom configuration location.
This adds modules for the icecream scheduler and daemon.
Icecream can be used for distributed compilation, especially in
environments with diverse toolchains, since it sends the complete build
environment to the daemon.
Unfortunatley the daemon can't be run with DynamicUser = true, since the
daemon requires to be started as root in order to accept other build
environments, see [1].
[1]: https://github.com/icecc/icecream#using-icecream-in-heterogeneous-environments
These were broken since 2016:
f0367da7d1
since StartLimitIntervalSec got moved into [Unit] from [Service].
StartLimitBurst has also been moved accordingly, so let's fix that one
too.
NixOS systems have been producing logs such as:
/nix/store/wf98r55aszi1bkmln1lvdbp7znsfr70i-unit-caddy.service/caddy.service:31:
Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
I have also removed some unnecessary duplication in units disabling
rate limiting since setting either interval or burst to zero disables it
(ad16158c10/src/basic/ratelimit.c (L16))
Use of Tailscale requires using the `tailscale` CLI to talk to the
daemon. If the CLI isn't in systemPackages, the resulting user experience
is confusing as the Tailscale daemon does nothing.
Signed-off-by: David Anderson <dave@natulte.net>
Fix an error in the validation code when the public key is in a
nonstandard location. The check command fails and the key is
incorrectly assumed to be expiring.
Treat it the same as IPv4 (I'm tempted to disable IPv4 by default);
this is the only option I still need to set manually to enjoy IPv6-only
networks including printer discovery!
The `curve25519-sha256` key exchange method is defined in RFC 8731 that
is identical to curve25519-sha256@libssh.org. OpenSSH supports the
method since version 7.4, released on 2016-12-19. It is literally a
violation of the "both in Secure Secure Shell and Mozilla guidelines"
rule, but it provides essentially the same but a future-proof default.
Also, links to the Mozilla OpenSSH guidelines are updated to refer to
the current place.
Signed-off-by: Masanori Ogino <167209+omasanori@users.noreply.github.com>
Secrets are injected from the environment into the rendered
configuration before each startup using envsubst.
The test now makes use of this feature for the server password.
powerDownCommands is supposed to run before shutdown, but the current
implementation only runs before-sleep, thus not enabling wakeonlan on
devices when powering off even if the hardware supports it.
Taking into consideration the possibility of unexpected shutdown, it is
preferable to move the commands to powerUpCommands instead which is
executed at boot time as well as after resume - that should cover all
use cases for wakeonlan.
Fixes#91352
- Use an acme user and group, allow group override only
- Use hashes to determine when certs actually need to regenerate
- Avoid running lego more than necessary
- Harden permissions
- Support "systemctl clean" for cert regeneration
- Support reuse of keys between some configuration changes
- Permissions fix services solves for previously root owned certs
- Add a note about multiple account creation and emails
- Migrate extraDomains to a list
- Deprecate user option
- Use minica for self-signed certs
- Rewrite all tests
I thought of a few more cases where things may go wrong,
and added tests to cover them. In particular, the web server
reload services were depending on the target - which stays alive,
meaning that the renewal timer wouldn't be triggering a reload
and old certs would stay on the web servers.
I encountered some problems ensuring that the reload took place
without accidently triggering it as part of the test. The sync
commands I added ended up being essential and I'm not sure why,
it seems like either node.succeed ends too early or there's an
oddity of the vm's filesystem I'm not aware of.
- Fix duplicate systemd rules on reload services
Since useACMEHost is not unique to every vhost, if one cert
was reused many times it would create duplicate entries in
${server}-config-reload.service for wants, before and
ConditionPathExists
