This properly implements revert in
0729f60697.
We used to have which='type -P' alias, but really it's best to just
rely on which package, only 88K in size.
cc @edolstra
Most of the desktop environments will spawn pulseaudio, but we can instead simply run it as a systemd service instead.
This patch also makes the system wide service run in foreground as recommended by the systemd projects and allows it to use sd_notify to signal ready instead of reading a pid written to a file. It is now also restarted on failure.
The user version has been tested with KDE and works fine there.
The system-wide version runs, but I haven't actually used it and upstream does not recommend running in this mode.
GnuPG 2.1.x changed the way the gpg-agent works, and that new approach no
longer requires (or even supports) the "start everything as a child of the
agent" scheme we've implemented in NixOS for older versions.
To configure the gpg-agent for your X session, add the following code to
~/.xsession or some other appropriate place that's sourced at start-up:
gpg-connect-agent /bye
GPG_TTY=$(tty)
export GPG_TTY
If you want to use gpg-agent for SSH, too, also add the settings
unset SSH_AGENT_PID
export SSH_AUTH_SOCK="${HOME}/.gnupg/S.gpg-agent.ssh"
and make sure that
enable-ssh-support
is included in your ~/.gnupg/gpg-agent.conf.
The gpg-agent(1) man page has more details about this subject, i.e. in the
"EXAMPLES" section.
- Enforce that an option declaration has a "defaultText" if and only if the
type of the option derives from "package", "packageSet" or "nixpkgsConfig"
and if a "default" attribute is defined.
- Enforce that the value of the "example" attribute is wrapped with "literalExample"
if the type of the option derives from "package", "packageSet" or "nixpkgsConfig".
- Warn if a "defaultText" is defined in an option declaration if the type of
the option does not derive from "package", "packageSet" or "nixpkgsConfig".
- Warn if no "type" is defined in an option declaration.
Both Qt and GTK load plugins from the active profiles
automatically, so it is sufficient to install input methods
system-wide. Overriding the plugin paths may interfere with correct
operation of other plugins.
- Now `pkg.outputUnspecified = true` but this attribute is missing in
every output, so we can recognize whether the user chose or not.
If (s)he didn't choose, we put `pkg.bin or pkg.out or pkg` into
`systemPackages`.
- `outputsToLink` is replaced by `extraOutputsToLink`.
We add extra outputs *regardless* of whether the user chose anything.
It's mainly meant for outputs with docs and debug symbols.
- Note that as a result, some libraries will disappear from system path.
Set this option to 'true' (default: 'false') to enable extension mechanisms for
DNS (EDNS) in your local glibc resolver. This is required for supporting
DNSSEC, for example.
Implementation detail: the patch changes assignments to "resolv_conf_options"
to use "+=" instead of "=" to ensure that multiple users of that variable don't
overwrite each other. The generated config file is a shell script, after all,
so this should work fine.
Closes https://github.com/NixOS/nixpkgs/issues/12470.
- add missing types in module definitions
- add missing 'defaultText' in module definitions
- wrap example with 'literalExample' where necessary in module definitions
Sadly, we can't instruct systemd to properly restart device-name.swap when this service restarts (or I haven't found the way to do so). As of now blindly restarting it would only get you a bunch of errors about device already used -- let's avoid it.
The kernel default for `link_power_management_policy` is `"max_performance"`.
This commit:
f169f60575
set the NixOS default to `"min_performance"`.
This issue (https://github.com/NixOS/nixpkgs/issues/11276) details my long
journey to discover this after several file system failures incorrectly
attributed to `TRIM` and `NCQ` settings.
I think we should use the kernel default of `"max_performance"` to assure
the best experience for new users with SSDs and to conform to the defaults of
the kernel and other distros.
The most complex problems were from dealing with switches reverted in
the meantime (gcc5, gmp6, ncurses6).
It's likely that darwin is (still) broken nontrivially.
Option aliases/deprecations can now be declared in any NixOS module,
not just in nixos/modules/rename.nix. This is more modular (since it
allows for example grub-related aliases to be declared in the grub
module), and allows aliases outside of NixOS (e.g. in NixOps modules).
The syntax is a bit funky. Ideally we'd have something like:
options = {
foo.bar.newOption = mkOption { ... };
foo.bar.oldOption = mkAliasOption [ "foo" "bar" "newOption" ];
};
but that's not possible because options cannot define values in
*other* options - you need to have a "config" for that. So instead we
have functions that return a *module*: mkRemovedOptionModule,
mkRenamedOptionModule and mkAliasOptionModule. These can be used via
"imports", e.g.
imports = [
(mkAliasOptionModule [ "foo" "bar" "oldOption" ] [ "foo" "bar" "newOption" ]);
];
As an added bonus, deprecation warnings now show the file name of the
offending module.
Fixes#10385.
Trigger a restart of the post-resume.target on resume.
That allows other systemd services to receive the restart signal
after resume by becoming 'partOf' the post-resume.target.
This fixes#10077 because after some debugging it turns out that by
default we don't have a font which is able to display Chinese symbols.
Thanks to @anderspapitto, @kmicu and hyper_ch on IRC to help debugging
this issue, see log at:
http://nixos.org/irc/logs/log.20150926 starting at 19:46
With unifont we have a reasonable fallback font to ensure that every
written language is rendered correctly and thus less surprise for new
users who keep their font settings at the default.
Reported-by: Anders Papitto <anderspapitto@gmail.com>
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The previous default was $out/lib/debug, which wasn't very useful.
This ensures that you can do
environment.systemPackages = [ pkgs.hello.debug ];
to install debug info.
`man 1 info` says:
The first non-option argument, if present, is the menu entry to
start from; it is searched for in all `dir' files along INFOPATH.
If it is not present, info merges all `dir' files and shows the
result. Any remaining arguments are treated as the names of menu
items relative to the initial node visited.
Which means that this does what previous programs/info did and #8519
(on-the-fly infodir generation for Emacs) wanted to do, but for both
programs.
This improves error messages when a set or a list is used where a path
was expected. For an example, if you used a package set (as opposed to a
single package) in systemPackages before this commit, the error was:
```
cannot coerce a list to a string, at "/home/nixpkgs/lib/types.nix":103:37
```
Now, the error message reads:
```
The option value `environment.systemPackages' in `/etc/nixos/configuration.nix' is not a list of paths.
```
Fixes#9110. Fontconfig recommends different precedence for rendering
settings and generic alias settings. To comply with the recommendations,
`98-nixos.conf` has been separated into `10-nixos-rendering.conf` and
`60-nixos-generic-alias.conf`.
Fixes the useless collisions in the system path.
The 64bit and 32bit variants have the same files, hence
it's pointless to put the 32bit pulseaudio in systemPackages.
With the new evaluation of arguments, pkgs is now defined by the
configuration, which implies that option declaration with pkgs.lib
will cause an infinite loop.
The default configuration installed the Bitstream Vera fonts, but DejaVu
is a superior replacement, and the default Fontconfig settings need it
now for the generic faces monospace, sans-serif, and serif.
Details:
* The option `fonts.fontconfig.ultimate.enable` can be used to disable
the fontconfig-ultimate configuration.
* The user-configurable options provided by fontconfig-ultimate are
exposed in the NixOS module: `allowBitmaps` (default: true),
`allowType1` (default: false), `useEmbeddedBitmaps` (default: false),
`forceAutohint` (default: false), `renderMonoTTFAsBitmap` (default:
false).
* Upstream provides three substitution modes for substituting TrueType
fonts for Type 1 fonts (which do not render well). The default,
"free", substitutes free fonts for Type 1 fonts. The option "ms"
substitutions Microsoft fonts for Type 1 fonts. The option "combi"
uses a combination of Microsoft and free fonts. Substitutions can also
be disabled.
* All 21 of the Infinality rendering modes supported by fontconfig-ultimate
or by the original Infinality distribution can be selected through
`fonts.fontconfig.ultimate.rendering`. The default is the medium style
provided by fontconfig-ultimate. Any of the modes may be customized,
or Infinality rendering can be disabled entirely.
Details:
* The option `fonts.enableFontConfig` has (finally) been renamed
`fonts.fontconfig.enable`.
* Configurations are loaded in this order: first the Fontconfig-upstream
configuration is loaded, then the NixOS-specific font directories are
set, the system-wide default configuration is loaded, and finally the
user configuration is loaded (if enabled).
* The NixOS options `fonts.fontconfig.defaultFonts.monospace`,
`fonts.fontconfig.defaultFonts.sansSerif` and
`fonts.fontconfig.defaultFonts.serif` are added to allow setting the
default system-wide font used for these generic faces. The defaults
are the appropriate faces from the DejaVu collection because of their
comprehensive Unicode coverage, clean rendering, and excellent
legibility.
* The NixOS option `fonts.fontconfig.antialias` can be used to disable
antialiasing (it is enabled by default).
* The options `fonts.fontconfig.subpixel.rgba` and
`fonts.fontconfig.subpixel.lcdfilter` control the system-wide default
settings for subpixel order and LCD filtering algorithm,
respectively.
* `fonts.fontconfig.hinting.enable` can be used to disable TrueType font
hinting (it is enabled by default).
`fonts.fontconfig.hinting.autohint` controls the FreeType autohinter.
`fonts.fontconfig.hinting.style` controls the hint style; it is "full"
by default.
* User configurations can be disabled system-wide by setting
`fonts.fontconfig.includeUserConf = false`. They are enabled by
default so users can set Fontconfig options in the desktop environment
of their choice.
Following the discussion NixOS#5021:
- obsolete the nix.proxy option
- add the networking.proxy option
- open a default no_proxy environment variable
- add a rsync option
- Manual tests ok.
- Automatic tests ok.
Amended by lethalman to simplify the option descriptions.
This is needed when /etc/resolv.conf is being overriden by networkd
and other configurations. If the file is destroyed by an environment
activation then it must be rebuilt so that applications which interface
with /etc/resolv.conf directly don't break.
Perl seems to write the file in latin1 independent of the actual input
encoding. This can corrupt the "description" field of /etc/passwd. By
setting "binmode" to ":utf8" Perl can be forced to write UTF-8. Ideally
the program would simply read/write the fields by value without any
changes in encoding. However, assuming/enforcing UTF-8 is a lot better
than using an obsolete coding like latin1.
In this case, they're equivalent to setting ‘password’ and
‘hashedPassword’ (since there is no distinction between an initial and
non-initial user account state).
I.e. don't call "passwd" to update /etc/shadow from the "password"
option. This has the side-effect of not updating the password if
mutableUsers = true (since the code path for "hashedPassword" has a
check for mutableUsers).
Fixes#4747.
Any reasonably new version of fontconfig does search that path by default,
and setting this globally causes problems, as 2.10 and 2.11 need
incompatible configs.
Tested: slim+xfce desktop, chrootenv-ed steam.
I have no idea why we were setting the global variable;
e.g., neither Fedora nor Ubuntu does that.
Option defaults should not refer to store paths, because they cause
the manual to be rebuilt gratuitously. It's especially bad to refer to
a highly variable path like a computed configuration file.
This hopefully fixes a regression introduced by 08b214a.
In bf129a2, it was already fixed for normal uid/gid values and it got
reintroduced by sub-uid/gid-handling again, so I've refactored it a bit
into a filterNull function which takes care of also the filtering
introduced by bf129a2.
I have not tested this extensively, but master is already broken for
systems with `mutableUsers = true` and no uid values set.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
* The module now has systemd config
* Add resolveLocalQueries option which sets up it as a dns server for
local host (including reasonable setup of resolvconf)
* Add "dnsmasq" user for running daemon
* Enabled dbus and dnssec support for the package
Conflicts:
nixos/modules/misc/ids.nix
Should bring most of the examples into a better consistency regarding
syntactic representation in the manual.
Thanks to @devhell for reporting.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
With mutableUsers = true, we now ensure that all users and groups that
were created declaratively, are updated or removed
appropriately. Thus, adding a user to users.extraUsers and then
removing it now causes the acoount to be removed from
/etc/passwd. Thus user/group management is fully congruent except that
users and groups that were created imperatively (via useradd/groupadd)
are not touched. We distinguish between declarative and imperative
users/groups by tracking the former in
/var/lib/nixos/declarative-{groups,users}.
With mutableUsers = false, you are now no longer required to specify
UIDs/GIDs for all users. The handling of mutableUsers = true/false is
the same code path; the only difference is that the "false" mode
ignores the existing contents of /etc/{passwd,group}.
The attribute ‘createUser’ is gone. It doesn't really make sense to
specify users that shouldn't be created.
