Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/radicale/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/rbymr2y0pbx8n8b8bfz2gscafmby904x-radicale-2.1.9/bin/.radicale-wrapped -h’ got 0 exit code
- ran ‘/nix/store/rbymr2y0pbx8n8b8bfz2gscafmby904x-radicale-2.1.9/bin/.radicale-wrapped --help’ got 0 exit code
- ran ‘/nix/store/rbymr2y0pbx8n8b8bfz2gscafmby904x-radicale-2.1.9/bin/.radicale-wrapped --version’ and found version 2.1.9
- ran ‘/nix/store/rbymr2y0pbx8n8b8bfz2gscafmby904x-radicale-2.1.9/bin/radicale -h’ got 0 exit code
- ran ‘/nix/store/rbymr2y0pbx8n8b8bfz2gscafmby904x-radicale-2.1.9/bin/radicale --help’ got 0 exit code
- ran ‘/nix/store/rbymr2y0pbx8n8b8bfz2gscafmby904x-radicale-2.1.9/bin/radicale --version’ and found version 2.1.9
- found 2.1.9 with grep in /nix/store/rbymr2y0pbx8n8b8bfz2gscafmby904x-radicale-2.1.9
- directory tree listing: https://gist.github.com/e41acc1e5d5f2db9d8498cf5a989eb7f
Following legacy packing conventions, `isArm` was defined just for
32-bit ARM instruction set. This is confusing to non packagers though,
because Aarch64 is an ARM instruction set.
The official ARM overview for ARMv8[1] is surprisingly not confusing,
given the overall state of affairs for ARM naming conventions, and
offers us a solution. It divides the nomenclature into three levels:
```
ISA: ARMv8 {-A, -R, -M}
/ \
Mode: Aarch32 Aarch64
| / \
Encoding: A64 A32 T32
```
At the top is the overall v8 instruction set archicture. Second are the
two modes, defined by bitwidth but differing in other semantics too, and
buttom are the encodings, (hopefully?) isomorphic if they encode the
same mode.
The 32 bit encodings are mostly backwards compatible with previous
non-Thumb and Thumb encodings, and if so we can pun the mode names to
instead mean "sets of compatable or isomorphic encodings", and then
voilà we have nice names for 32-bit and 64-bit arm instruction sets
which do not use the word ARM so as to not confused either laymen or
experienced ARM packages.
[1]: https://developer.arm.com/products/architecture/a-profile
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/sabnzbd/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/rl41iqq34y5lbia598awnnr5zlqvn7p0-sabnzbd-2.3.3/bin/.sabnzbd-wrapped -h’ got 0 exit code
- ran ‘/nix/store/rl41iqq34y5lbia598awnnr5zlqvn7p0-sabnzbd-2.3.3/bin/.sabnzbd-wrapped --help’ got 0 exit code
- ran ‘/nix/store/rl41iqq34y5lbia598awnnr5zlqvn7p0-sabnzbd-2.3.3/bin/sabnzbd -h’ got 0 exit code
- ran ‘/nix/store/rl41iqq34y5lbia598awnnr5zlqvn7p0-sabnzbd-2.3.3/bin/sabnzbd --help’ got 0 exit code
- found 2.3.3 with grep in /nix/store/rl41iqq34y5lbia598awnnr5zlqvn7p0-sabnzbd-2.3.3
- directory tree listing: https://gist.github.com/06ad54e65a99a41896933852c69b59c1
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/arangodb/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/foxx-manager --help’ got 0 exit code
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/foxx-manager help’ got 0 exit code
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/arangobench --help’ got 0 exit code
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/arangodump --help’ got 0 exit code
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/arangoexport --help’ got 0 exit code
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/arangoimp --help’ got 0 exit code
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/arangorestore --help’ got 0 exit code
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/arangosh --help’ got 0 exit code
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/arangovpack --help’ got 0 exit code
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/arango-dfdb --help’ got 0 exit code
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/arango-init-database --help’ got 0 exit code
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/arango-secure-installation --help’ got 0 exit code
- ran ‘/nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7/bin/arangod --help’ got 0 exit code
- found 3.3.7 with grep in /nix/store/lh49lm0kdkijvg9q9kzmacnclh5x2s4m-arangodb-3.3.7
- directory tree listing: https://gist.github.com/3fef3cf0eb3977fe8d69df9bbbedc5a9
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/freeradius/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/radcrypt help’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/smbencrypt -h’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/smbencrypt --help’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/smbencrypt help’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/radsniff -h’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/radlast -h’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/radlast --help’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/radzap -h’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/radiusd -h’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/radmin -h’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/radmin --help’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/rc.radiusd -h’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/rc.radiusd --help’ got 0 exit code
- ran ‘/nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17/bin/rc.radiusd help’ got 0 exit code
- found 3.0.17 with grep in /nix/store/w85s8cwg1d1kblhqiqi1fqxka1lilfb5-freeradius-3.0.17
- directory tree listing: https://gist.github.com/0674f9c9bf80af589d86399e508dc604
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/ircd-hybrid/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/ggb89l411451a7f99590qx4l374kjgbr-ircd-hybrid-8.2.24/bin/mkpasswd -h’ got 0 exit code
- ran ‘/nix/store/ggb89l411451a7f99590qx4l374kjgbr-ircd-hybrid-8.2.24/bin/mkpasswd --help’ got 0 exit code
- ran ‘/nix/store/ggb89l411451a7f99590qx4l374kjgbr-ircd-hybrid-8.2.24/bin/ircd help’ got 0 exit code
- found 8.2.24 with grep in /nix/store/ggb89l411451a7f99590qx4l374kjgbr-ircd-hybrid-8.2.24
- directory tree listing: https://gist.github.com/f272ead9b6591f5ffe113885b6151952
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/jackett/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/gi1iygygag1b9cb30gir6yzv0jas2612-jackett-0.8.886/bin/Jackett -h’ got 0 exit code
- ran ‘/nix/store/gi1iygygag1b9cb30gir6yzv0jas2612-jackett-0.8.886/bin/Jackett help’ got 0 exit code
- found 0.8.886 with grep in /nix/store/gi1iygygag1b9cb30gir6yzv0jas2612-jackett-0.8.886
- directory tree listing: https://gist.github.com/79337833aca5adb980efc368f828a551
Semi-automatic update generated by https://github.com/ryantm/nixpkgs-update tools.
This update was made based on information from https://repology.org/metapackage/uftp/versions.
These checks were done:
- built on NixOS
- ran ‘/nix/store/97wm1cjgqd5ih45689h2xmqfv7ywv8bi-uftp-4.9.6/bin/uftpd help’ got 0 exit code
- ran ‘/nix/store/97wm1cjgqd5ih45689h2xmqfv7ywv8bi-uftp-4.9.6/bin/uftp_keymgt -h’ got 0 exit code
- ran ‘/nix/store/97wm1cjgqd5ih45689h2xmqfv7ywv8bi-uftp-4.9.6/bin/uftp_keymgt --help’ got 0 exit code
- ran ‘/nix/store/97wm1cjgqd5ih45689h2xmqfv7ywv8bi-uftp-4.9.6/bin/uftp_keymgt help’ got 0 exit code
- found 4.9.6 with grep in /nix/store/97wm1cjgqd5ih45689h2xmqfv7ywv8bi-uftp-4.9.6
- directory tree listing: https://gist.github.com/c08d432d7a238559a904561aa46161bd
All imake (xmkmf) based builds use the lib/X11/config/darwin.cf file to
define locations of cpp, cc, c++ (in /usr/bin by default). We remove the
directoy part to force darwin builds to search the $PATH for those
commands.
