There's many reason why it is and is going to
continue to be difficult to do this:
1. All display-managers (excluding slim) default PAM rules
disallow root auto login.
2. We can't use wayland
3. We have to use system-wide pulseaudio
4. It could break applications in the session.
This happened to dolphin in plasma5
in the past.
This is a growing technical debt, let's just use
passwordless sudo.
ibus-qt has not seen a release in 5 years and is only relevant for Qt
4.x, which is becoming more and more rare. Using my current laptop as a
data point, ibus-qt is the only dependency left that drags in qt-4.8.7.
Motivation is to support other repositories containing nixos
modules that would like to generate options documentation:
- nix-darwin
- private repos
- arion
- ??
One of the main problems of the Nextcloud module is that it's currently
not possible to alter e.g. database configuration after the initial
setup as it's written by their imperative installer to a file.
After some research[1] it turned out that it's possible to override all values
with an additional config file. The documentation has been
slightly updated to remain up-to-date, but the warnings should
remain there as the imperative configuration is still used and may cause
unwanted side-effects.
Also simplified the postgresql test which uses `ensure{Databases,Users}` to
configure the database.
Fixes#49783
[1] https://github.com/NixOS/nixpkgs/issues/49783#issuecomment-483063922
This was supposed to go through a pull request
Revert "nodePackages: Regenerate node packages for nodejs 10 & 12"
This reverts commit 6a17bdf397.
Revert "nodejs-8_x: Drop package"
This reverts commit e06c97b71d.
PHP 7.1 is currently on life support, as in only recieving security related patches.
This will only continue until: 2019-12-01
This date are in the middle of the 19.09 lifecycle. So it would be
nice to not have it in the 19.09 stable release. Dropping it now would
also result in less maintanance in updating them.
The death dates can be seen on following links:
- https://endoflife.date/php
- https://php.net/supported-versions.php
- https://en.wikipedia.org/wiki/PHP#Release_history
It seems as the sentence at the bottom of the option summary about
Nix-specific options isn't enough, it's probably more helpful to list
those options in the synopsis as well.
The autoLuks module is not really compatible with the updated systemd
version anymore. We started dropping NixOS specific patches that caused
unwanted side effects that we had to work around otherwise.
This change points users towards the relevant PR and spits out a bit of
information on how to deal with the situation.
Somewhen between systemd v239 and v242 upstream decided to no longer run
a few system services with `DyanmicUser=1` but failed to provide a
migration path for all the state those services left behind.
For the case of systemd-timesync the state has to be moved from
/var/lib/private/systemd/timesync to /var/lib/systemd/timesync if
/var/lib/systemd/timesync is currently a symlink.
We only do this if the stateVersion is still below 19.09 to avoid
starting to have an ever growing activation script for (then) ancient
systemd migrations that are no longer required.
See https://github.com/systemd/systemd/issues/12131 for details about
the missing migration path and related discussion.
mysql already has its socket path hardcoded to to
/run/mysqld/mysqld.sock.
There's not much value in making the pidDir configurable, which also
points to /run/mysqld by default.
We only seem to use `services.mysql.pidDir` in the wordpress startup
script, to wait for mysql to boot up, but we can also simply wait on the
(hardcoded) socket location too.
A much nicer way to accomplish that would be to properly describe a
dependency on mysqld.service. This however is not easily doable, due to
how the apache-httpd module was designed.
As we don't need to setup data directories from ExecStartPre= scripts
anymore, which required root, but use systemd.tmpfiles.rules instead,
everything can be run as just the mysql user.
Some packages like `ibus-engines.typing-booster` require the dictionary
`fr_FR.dic` to provide proper support for the french language.
Until now the hunspell package set of nixpkgs didn't provide this
dictionary. It has been recommended to use `fr-moderne` as base and link
`fr_FR.dic` from it as done by other distros such as ArchLinux.
See https://github.com/NixOS/nixpkgs/issues/46940#issuecomment-423684570Fixes#46940
The build error has been introduced by 56dcc319cf.
Using a <simplesect/> within a <para/> is not allowed and subsequently
fails to validate while building the manual.
So instead, I moved the <simplesect/> further down and outside of the
<para/> to fix this.
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @aaronjanse, @Lassulus, @danbst
I have a nixops network where I deploy containers using the `container`
backend which uses `nixos-container` intenrally to deploy several
containers to a certain host.
During that time I removed and added new containers and while trying to
deploy those to a different host I realized that it isn't guaranteed
that each container gets the same IP address which is a problem as some
parts of the deployment need to know which container is using which IP
(i.e. to configure port forwarding on the host).
With this change you can specify the container's IP like this (and don't
have to use the arbitrarily used 10.233.0.0/16 subnet):
```
$ nixos-container create test --config-file test-container.nix \
--local-address 10.235.1.2 --host-address 10.235.1.1
```
Commit 29d7d8f44d has introduced another
section with the ID "sec-release-19.09-incompatibilities", which
subsequently causes the build to fail.
I just merged both sections and the manual is now building again.
Signed-off-by: aszlig <aszlig@nix.build>
Currently if you want to properly chroot a systemd service, you could do
it using BindReadOnlyPaths=/nix/store or use a separate derivation which
gathers the runtime closure of the service you want to chroot. The
former is the easier method and there is also a method directly offered
by systemd, called ProtectSystem, which still leaves the whole store
accessible. The latter however is a bit more involved, because you need
to bind-mount each store path of the runtime closure of the service you
want to chroot.
This can be achieved using pkgs.closureInfo and a small derivation that
packs everything into a systemd unit, which later can be added to
systemd.packages.
However, this process is a bit tedious, so the changes here implement
this in a more generic way.
Now if you want to chroot a systemd service, all you need to do is:
{
systemd.services.myservice = {
description = "My Shiny Service";
wantedBy = [ "multi-user.target" ];
confinement.enable = true;
serviceConfig.ExecStart = "${pkgs.myservice}/bin/myservice";
};
}
If more than the dependencies for the ExecStart* and ExecStop* (which
btw. also includes script and {pre,post}Start) need to be in the chroot,
it can be specified using the confinement.packages option. By default
(which uses the full-apivfs confinement mode), a user namespace is set
up as well and /proc, /sys and /dev are mounted appropriately.
In addition - and by default - a /bin/sh executable is provided, which
is useful for most programs that use the system() C library call to
execute commands via shell.
Unfortunately, there are a few limitations at the moment. The first
being that DynamicUser doesn't work in conjunction with tmpfs, because
systemd seems to ignore the TemporaryFileSystem option if DynamicUser is
enabled. I started implementing a workaround to do this, but I decided
to not include it as part of this pull request, because it needs a lot
more testing to ensure it's consistent with the behaviour without
DynamicUser.
The second limitation/issue is that RootDirectoryStartOnly doesn't work
right now, because it only affects the RootDirectory option and doesn't
include/exclude the individual bind mounts or the tmpfs.
A quirk we do have right now is that systemd tries to create a /usr
directory within the chroot, which subsequently fails. Fortunately, this
is just an ugly error and not a hard failure.
The changes also come with a changelog entry for NixOS 19.03, which is
why I asked for a vote of the NixOS 19.03 stable maintainers whether to
include it (I admit it's a bit late a few days before official release,
sorry for that):
@samueldr:
Via pull request comment[1]:
+1 for backporting as this only enhances the feature set of nixos,
and does not (at a glance) change existing behaviours.
Via IRC:
new feature: -1, tests +1, we're at zero, self-contained, with no
global effects without actively using it, +1, I think it's good
@lheckemann:
Via pull request comment[2]:
I'm neutral on backporting. On the one hand, as @samueldr says,
this doesn't change any existing functionality. On the other hand,
it's a new feature and we're well past the feature freeze, which
AFAIU is intended so that new, potentially buggy features aren't
introduced in the "stabilisation period". It is a cool feature
though? :)
A few other people on IRC didn't have opposition either against late
inclusion into NixOS 19.03:
@edolstra: "I'm not against it"
@Infinisil: "+1 from me as well"
@grahamc: "IMO its up to the RMs"
So that makes +1 from @samueldr, 0 from @lheckemann, 0 from @edolstra
and +1 from @Infinisil (even though he's not a release manager) and no
opposition from anyone, which is the reason why I'm merging this right
now.
I also would like to thank @Infinisil, @edolstra and @danbst for their
reviews.
[1]: https://github.com/NixOS/nixpkgs/pull/57519#issuecomment-477322127
[2]: https://github.com/NixOS/nixpkgs/pull/57519#issuecomment-477548395
eb90d97009 broke nslcd, as /run/nslcd was
created/chowned as root user, while nslcd wants to do parts as nslcd
user.
This commit changes the nslcd to run with the proper uid/gid from the
start (through User= and Group=), so the RuntimeDirectory has proper
permissions, too.
In some cases, secrets are baked into nslcd's config file during startup
(so we don't want to provide it from the store).
This config file is normally hard-wired to /etc/nslcd.conf, but we don't
want to use PermissionsStartOnly anymore (#56265), and activation
scripts are ugly, so redirect /etc/nslcd.conf to /run/nslcd/nslcd.conf,
which now gets provisioned inside ExecStartPre=.
This change requires the files referenced to in
users.ldap.bind.passwordFile and users.ldap.daemon.rootpwmodpwFile to be
readable by the nslcd user (in the non-nslcd case, this was already the
case for users.ldap.bind.passwordFile)
fixes#57783
First of all, the reason I added this to the "highlights" section is
that we want users to be aware of these options, because in the end we
really want to decrease the attack surface of NixOS services and this is
a step towards improving that situation.
The reason why I'm adding this to the changelog of the NixOS 19.03
release instead of 19.09 is that it makes backporting services that use
these options easier. Doing the backport of the confinement module after
the official release would mean that it's not part of the release
announcement and potentially could fall under the radar of most users.
These options and the whole module also do not change anything in
existing services or affect other modules, so they're purely optional.
Adding this "last minute" to the 19.03 release doesn't hurt and is
probably a good preparation for the next months where we hopefully
confine as much services as we can :-)
I also have asked @samueldr and @lheckemann, whether they're okay with
the inclusion in 19.03. While so far only @samueldr has accepted the
change, we can still move the changelog entry to the NixOS 19.09 release
notes in case @lheckemann rejects it.
Signed-off-by: aszlig <aszlig@nix.build>
I'm not 100% sure about the incompatibility lines,
but I believe it's better to discourage these anyway.
If you find better information, feel free to amend...
The 32-bit thing is completely GPU-agnostic, so I can't see why we had
it separately for proprietary drivers and missing for the rest.
Compatibility with other distributions/software and expectation
of users coming from other systems should have higher priority over consistency.
In particular this fixes#51375, where the NetworkManager-wait-online.service
broke as a result of this.
This is a backwards-incompatible change and while it won't probably
affect a whole lot of users, it makes sense to give them a heads-up
anyway.
Signed-off-by: aszlig <aszlig@nix.build>
The function `addCheck` resides within the attrset `types`. We should be
explicit about this since otherwise people might be confused where it
does come from / why it doesn't work for them.
The explicit remove helped to uncover some hidden uses of `optionSet`
in NixOps. However it makes life harder for end-users of NixOps - it will
be impossible to deploy 19.03 systems with old NixOps, but there is no
new release of NixOps with `optionSet` fixes.
Also, "deprecation" process isn't well defined. Even that `optionSet` was
declared "deprecated" for many years, it was never announced. Hence, I
leave "deprecation" announce. Then, 3 releases after announce,
we can announce removal of this feature.
This type has to be removed, not `throw`-ed in runtime, because it makes
some perfectly fine code to fail. For example:
```
$ nix-instantiate --eval -E '(import <nixpkgs/lib>).types' --strict
trace: `types.list` is deprecated; use `types.listOf` instead
error: types.optionSet is deprecated; use types.submodule instead
(use '--show-trace' to show detailed location information)
```
Before this change `man 5 configuration.nix` would only show options of modules in
the `baseModules` set, which consists only of the list of modules in
`nixos/modules/module-list.nix`
With this change applied and `documentation.nixos.includeAllModules` option enabled
all modules included in `configuration.nix` file will be used instead.
This makes configurations with custom modules self-documenting. It also means
that importing non-`baseModules` modules like `gce.nix` or `azure.nix`
will make their documentation available in `man 5 configuration.nix`.
`documentation.nixos.includeAllModules` is currently set to `false` by
default as enabling it usually uncovers bugs and prevents evaluation.
It should be set to `true` in a release or two.
This was originally implemented in #47177, edited for more configurability,
documented and rebased onto master by @oxij.
system-sendmail allows all sendmail's to be auto-detected, including on
non-NixOS systems. This is, to me, a better UX than having to manually
override the sendmailPath argument.
In exchange, it is a breach of retro-compatibility. Given right now I
can't see any uses for sendmailPath other than what is supported by
system-sendmail, I didn't keep it, but it'd be possible to allow
sendmailPath to override the choice of sendmail from system-sendmail.
* pr-55320:
nixos/release-notes: mention breaking changes with matrix-synapse update
nixos/matrix-synapse: reload service with SIGHUP
nixos/tests/matrix-synapse: generate ca and certificates
nixos/matrix-synapse: use python to launch synapse
pythonPackages.pymacaroons-pynacl: remove unmaintained fork
matrix-synapse: 0.34.1.1 -> 0.99.0
pythonPackages.pymacaroons: init at 0.13.0
* redmine: 3.4.8 -> 4.0.1
* nixos/redmine: update nixos test to run against both redmine 3.x and 4.x series
* nixos/redmine: default new installs from 19.03 onward to redmine 4.x series, while keeping existing installs on redmine 3.x series
* nixos/redmine: add comment about default redmine package to 19.03 release notes
* redmine: add aandersea as a maintainer
Also simplified the argument parsing to write all currently supported
CLI options into a bash array and pass this to `nix-build`.
Also documented `--option` usage in the corresponding manpage.
The motivation for this is that some applications are unaware
of this feature and can set their volume to 100% on startup
harming people ears and possiblly blowing someone's audio
setup.
I noticed this in #54594 and by extension epiphany[0].
Please also note that many other distros have this default for
the reason outlined above.
Closes#5632#54594
[0]: https://bugzilla.gnome.org/show_bug.cgi?id=675217
- add `zramSwap.algorithm` option, which allows to change compressor
declaratively. zstd as default
- add `zramSwap.swapDevices` option, which allows to define how many zram
devices will be used as swap. Rest devices can be managed freely
- simpler floating calculations
- fix udev race condition
- some documentation changes
- replaced `/sys/block/zram*` handling with `zramctl`, because I had occasional
"Device is busy" error (looks like zram has to be configured in predefined order)
- added `memoryPercent` and `algorithm` as restart triggers. I think, it was
a bug that changing `memoryPercent` in configuration wasn't applied immediately.
- removed a bind to .swap device. While it looks natural (when swap device goes
off, so should zram device), it wasn't implemented properly. This caused problems
with swapon/swapoff:
```
$ cat /proc/swaps
Filename Type Size Used Priority
/dev/zram0 partition 8166024 0 -2
/var/swapfile file 5119996 5120 1
$ sudo swapoff -a
$ sudo swapon -a
swapon: /dev/zram0: read swap header failed
$ cat /proc/swaps
Filename Type Size Used Priority
/var/swapfile file 5119996 0 1
```
Since nix 2.0 the no-build-hook option was replaced by the builders options
that allows to override remote builders ad-hoc.
Since it is useful to disable remote builders updating nixos without network,
this commit reintroduces the option.
This adds a NixOS option for setting the CPU max and min frequencies
with `cpufreq`. The two options that have been added are:
- `powerManagement.cpufreq.max`
- `powerManagement.cpufreq.min`
It also adds an alias to the `powerManagement.cpuFreqGovernor` option as
`powerManagement.cpufreq.governor`. This updates the installer to use
the new option name. It also updates the manual with a note about
the new name.
Having pam_unix set to "sufficient" means early-succeeding account
management group, as soon as pam_unix.so is succeeding.
This is not sufficient. For example, nixos modules might install nss
modules for user lookup, so pam_unix.so succeeds, and we end the stack
successfully, even though other pam account modules might want to do
more extensive checks.
Other distros seem to set pam_unix.so to 'required', so if there are
other pam modules in that management group, they get a chance to do some
validation too.
For SSSD, @PsyanticY already added a workaround knob in
https://github.com/NixOS/nixpkgs/pull/31969, while stating this should
be the default anyway.
I did some thinking in what could break - after this commit, we require
pam_unix to succeed, means we require `getent passwd $username` to
return something.
This is the case for all local users due to the passwd nss module, and
also the case for all modules installing their nss module to
nsswitch.conf - true for ldap (if not explicitly disabled) and sssd.
I'm not so sure about krb5, cc @eqyiel for opinions. Is there some nss
module loaded? Should the pam account module be placed before pam_unix?
We don't drop the `security.pam.services.<name?>.sssdStrictAccess`
option, as it's also used some lines below to tweak error behaviour
inside the pam sssd module itself (by changing it's 'control' field).
This is also required to get admin login for Google OS Login working
(#51566), as their pam_oslogin_admin accounts module takes care of sudo
configuration.
pkgs.owncloud still pointed to owncloud 7.0.15 (from May 13 2016)
Last owncloud server update in nixpkgs was in Jun 2016.
At the same time Nextcloud forked away from it, indicating users
switched over to that.
cc @matej (original maintainer)
* modularity: Document the ability to use non-files in imports
* Update nixos/doc/manual/configuration/modularity.xml
Co-Authored-By: Baughn <svein@google.com>
This fixes some quirks I introduced in previous commits.
1. No need for an extra newline when printing the output of shell commands.
2. 'or die' is what's already used in the NixOS test sources, while
'die unless' has no occurrences.
* run as user 'slurm' per default instead of root
* add user/group slurm to ids.nix
* fix default location for the state dir of slurmctld:
(/var/spool -> /var/spool/slurmctld)
* Update release notes with the above changes
TrueCrypt has been retired for a while now and the source archive we
pointed to is gone. Moreover the VeraCrypt fork is available, maintained
and fixes issues previous audits found in TrueCrypt.
Nixpkgs' channel currently can't move forward so long as there is a
trace in evaluating the top-level arguments. Which means that it isn't
possible to add a warning message to warn users of future package
removal.
So the only way forward appears to be just removing the alias
altogether.
(cherry picked from commit b4133ebc17)
