For the same reason Alertmanager supports environmentFile to pass
secrets along, it is useful to support the same for Prometheus'
configuration to store bearer tokens outside the Nix store.
These were broken since 2016:
f0367da7d1
since StartLimitIntervalSec got moved into [Unit] from [Service].
StartLimitBurst has also been moved accordingly, so let's fix that one
too.
NixOS systems have been producing logs such as:
/nix/store/wf98r55aszi1bkmln1lvdbp7znsfr70i-unit-caddy.service/caddy.service:31:
Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
I have also removed some unnecessary duplication in units disabling
rate limiting since setting either interval or burst to zero disables it
(ad16158c10/src/basic/ratelimit.c (L16))
* nixos/postgresql: fix inaccurate docs for authentication
We actually use peer authentication, then md5 based authentication.
trust is not used.
* Use a link for mkForce docs
Co-authored-by: aszlig <aszlig@redmoonstudios.org>
Co-authored-by: lf- <lf-@users.noreply.github.com>
Co-authored-by: aszlig <aszlig@redmoonstudios.org>
Use of Tailscale requires using the `tailscale` CLI to talk to the
daemon. If the CLI isn't in systemPackages, the resulting user experience
is confusing as the Tailscale daemon does nothing.
Signed-off-by: David Anderson <dave@natulte.net>
Currently lxqt is a desktop environment that's compiled against qt514.
To avoid possible issues (#101369), we (hopefully) use the same qt
version as the desktop environment at hand. LXQT should move to qt515,
and for the long term the correct qt version should be inherited by the
sddm module.
When the stage-1 logs get imported in to the journal, they all get
loaded with the same timestamp. This makes it difficult to identify
what might be taking a long time in early boot.
The hydra tarball step would fail due to the nodes attribute not being
properly inherited. Since we can't execute all the tests and release
steps locally anymore (thanks to the JSONification and faster hydra
eval) these errors will probably keep in appearing.
This is hopefully the last of those introduced by me test runner
refactoring.
Error was seen on hydra (https://hydra.nixos.org/build/129282411):
> unpacking sources
> unpacking source archive /nix/store/bp95x52h6nv3j8apxrryyj2rviw682k1-source
> source root is source
> patching sources
> autoconfPhase
> No bootstrap, bootstrap.sh, configure.in or configure.ac. Assuming this is not an GNU Autotools package.
> configuring
> release name is nixpkgs-21.03pre249116.1088f059401
> git-revision is 1088f05940
> building
> no Makefile, doing nothing
> running tests
> warning: you did not specify '--add-root'; the result might be removed by the garbage collector
> warning: you did not specify '--add-root'; the result might be removed by the garbage collector
> checking Nixpkgs on i686-linux
> checking Nixpkgs on x86_64-linux
> checking Nixpkgs on x86_64-darwin
> checking eval-release.nix
> trace: `mkStrict' is obsolete; use `mkOverride 0' instead.
> trace: `lib.nixpkgsVersion` is deprecated, use `lib.version` instead!
> trace: warning: lib.readPathsFromFile is deprecated, use a list instead
> trace: Warning: `showVal` is deprecated and will be removed in the next release, please use `traceSeqN`
> trace: lib.zip is deprecated, use lib.zipAttrsWith instead
> checking find-tarballs.nix
> trace: `mkStrict' is obsolete; use `mkOverride 0' instead.
> trace: `lib.nixpkgsVersion` is deprecated, use `lib.version` instead!
> trace: warning: lib.readPathsFromFile is deprecated, use a list instead
> trace: Warning: `showVal` is deprecated and will be removed in the next release, please use `traceSeqN`
> trace: lib.zip is deprecated, use lib.zipAttrsWith instead
> error: while evaluating anonymous function at /build/source/maintainers/scripts/find-tarballs.nix:6:1, called from undefined position:
> while evaluating 'operator' at /build/source/maintainers/scripts/find-tarballs.nix:27:16, called from undefined position:
> while evaluating 'immediateDependenciesOf' at /build/source/maintainers/scripts/find-tarballs.nix:39:29, called from /build/source/maintainers/scripts/find-tarballs.nix:27:44:
> while evaluating anonymous function at /build/source/lib/attrsets.nix:234:10, called from undefined position:
> while evaluating anonymous function at /build/source/maintainers/scripts/find-tarballs.nix:40:37, called from /build/source/lib/attrsets.nix:234:16:
> while evaluating 'derivationsIn' at /build/source/maintainers/scripts/find-tarballs.nix:42:19, called from /build/source/maintainers/scripts/find-tarballs.nix:40:40:
> while evaluating 'canEval' at /build/source/maintainers/scripts/find-tarballs.nix:48:13, called from /build/source/maintainers/scripts/find-tarballs.nix:43:9:
> while evaluating the attribute 'nodes' at /build/source/nixos/lib/testing-python.nix:195:23:
> attribute 'nodes' missing, at /build/source/nixos/lib/testing-python.nix:193:16
> build time elapsed: 0m0.122s 0m0.043s 17m51.526s 0m56.668s
> builder for '/nix/store/96rk3c74vrk6m3snm7n6jhis3j640pn4-nixpkgs-tarball-21.03pre249116.1088f059401.drv' failed with exit code 1
Fix an error in the validation code when the public key is in a
nonstandard location. The check command fails and the key is
incorrectly assumed to be expiring.
When using the Modern config from the Mozilla SSL config generator,
the `ssl_ciphers` parameter does not need to be set
as only TLSv1.3 is permitted and all of its ciphers are reasonable.
Treat it the same as IPv4 (I'm tempted to disable IPv4 by default);
this is the only option I still need to set manually to enjoy IPv6-only
networks including printer discovery!
This reverts commit aab534b894 & uses the
driverInteractive attribute for the test driver instead.
This has the same effect but removes the extra module in the
nixos-build-vms code.
In 5500dc8 we introduced the --keep-vm-state flag and defaulted to that
flag not being set. This lead to the `runInMachine` tests not longer
working and that going unnoticed for quite some time now.
Previously you would be able to override only the QEMU package to be
used in the test runner. Frankly that doesn't help a lot if you are
trying to get a graphical session. The graphical session requires the
option in the NixOS module system to bet set to the correct QEMU
package.
In this commit I moved most of the test node configuration and
transformations into the `mkDriver` function (previously called
`driver`). The motivation was to be able to create a `driver` instance
with a given QEMU package that will be used consistently througout the
test expression.
According to Python documentation [0], `bufsize=1` is only meaningful in
text mode. As we don't pass in an argument called `universal_newlines`,
`encoding`, `errors` or `text` the file objects aren't opened in text
mode, which means the argument is ignored with a warning in Python 3.8.
line buffering (buffering=1) isn't supported in binary mode,
the default buffer size will be used
This commit removes this warning that appared when using
interactive test driver built with `-A driver`. This is done by
removing `bufsize=1` from Popen calls.
The default parameter when unspecified for `bufsize` is `-1` which
according to the documentation will be interpreted as
`io.DEFAULT_BUFFER_SIZE`. As mentioned by a warning, Python already
uses default buffer size when providing `buffering=1` parameter for
file objects not opened in text mode.
[0]: https://docs.python.org/3/library/subprocess.html#subprocess.Popen
This fixes an eval error that occurred on hydra with the small channel
and the `nixos.tests.boot.biosCdrom.x86_64-linux` attribute:
> $ nix-instantiate nixos/release-small.nix -A nixos.tests.boot.biosCdrom.x86_64-linux
> warning: unknown setting 'experimental-features'
> error: The option `virtualisation.qemu' does not exist. Definition values:
> - In `/home/andi/dev/nixos/nixpkgs/nixos/modules/testing/test-instrumentation.nix':
> {
> consoles = [ ];
> package = {
> _type = "override";
> content = <derivation /nix/store/q72h2cdcb9zjgiay5gdgzwddjkbjr7xq-qemu-host-cpu-only-for-vm-tests-5.1.0.drv>;
> ...
> (use '--show-trace' to show detailed location information)
In bc2188b we changed test test-instrumentation to also set the QEMU
package that is being used. That change unfortunately caused us to
always assing values to the virtualisation.qemu.package option even when
the option is not defined. The original code was explicitly testing for
the consoles case but the then newly extended version did not adjust the
check as the intention was probably not clear.
With this commit we are always ensuring the entire virtualisation.qemu
section exists and can thus drop the individual tests for each of the
sections since the QEMU module always defines both the package and the
consoles option when it's root is defined..
