3
0
Fork 0
forked from mirrors/nixpkgs
Commit graph

84 commits

Author SHA1 Message Date
Alyssa Ross 65dcd244bc maintainers/create-azure.sh: run from anywhere
I'm not really sure how the line directly after ended up with this,
but this line didn't...
2020-01-09 20:54:28 +00:00
Andrew Childs bd61216f55 ec2/create-amis.sh: register root device as /dev/xvda
For the case of blkfront drives, there appears to be no difference
between /dev/sda1 and /dev/xvda: the drive always appears as the
kernel device /dev/xvda.

For the case of nvme drives, the root device typically appears as
/dev/nvme0n1.  Amazon provides the 'ec2-utils' package for their first
party linux ("Amazon Linux"), which configures udev to create symlinks
from the provided name to the nvme device name. This name is
communicated through nvme "Identify Controller" response, which can be
inspected with:

  nvme id-ctrl --raw-binary /dev/nvme0n1 | cut -c3073-3104 | hexdump -C

On Amazon Linux, where the device is attached as "/dev/xvda", this
creates:

- /dev/xvda  -> nvme0n1
- /dev/xvda1 -> nvme0n1p1

On NixOS where the device is attach as "/dev/sda1", this creates:

- /dev/sda1  -> nvme0n1
- /dev/sda11 -> nvme0n1p1

This is odd, but not inherently a problem.

NixOS unconditionally configures grub to install to `/dev/xvda`, which
fails on an instance using nvme storage. With the root device name set
to xvda, both blkfront and nvme drives are accessible as /dev/xvda,
either directly or by symlink.
2019-11-02 05:58:58 +09:00
AmineChikhaoui dc13a7f26a
ec2-amis.nix: add 19.09 amis
replace /home/deploy -> $HOME to allow running the script from outside
the bastion.
2019-10-28 14:04:20 -04:00
Johan Thomsen b263e57c57 scripts/gce: make image name configurable 2019-10-25 10:10:42 +02:00
Andrew Childs 84742e2293 amazon-image.nix: upload prebuilt images 2019-09-05 00:52:21 +09:00
Andrew Childs 25bee972e9 amazon-image.nix: add hydra-build-products and improve metadata 2019-09-05 00:52:20 +09:00
Andrew Childs 027e5560bd amazon-image.nix: default to vpc formatted images
These can be imported without converison.
2019-09-05 00:52:20 +09:00
Andrew Childs 5501274b5f amazon-image.nix: add EFI support, enable by default for aarch64 2019-09-05 00:52:17 +09:00
danbst 0f8596ab3f mass replace "flip map -> forEach"
See `forEach`-introduction commit.
```
rg 'flip map ' --files-with-matches | xargs sed -i 's/flip map /forEach /g'
```
2019-08-05 14:03:38 +03:00
danbst 91bb646e98 Revert "mass replace "flip map -> foreach""
This reverts commit 3b0534310c.
2019-08-05 14:01:45 +03:00
danbst 3b0534310c mass replace "flip map -> foreach"
See `foreach`-introduction commit.
```
rg 'flip map ' --files-with-matches | xargs sed -i 's/flip map /foreach /g'
```
2019-07-14 13:46:10 +03:00
Daniel Schaefer 786f02f7a4 treewide: Remove usage of isNull
isNull "is deprecated; just write e == null instead" says the Nix manual
2019-04-29 14:05:50 +02:00
talyz 261372b69c amazon-image.nix: Resolve failure to include resize2fs
Since 34234dcb51, for resize2fs to be automatically included in
initrd, a filesystem needed for boot must be explicitly defined as an
ext* type filesystem.
2019-03-15 17:33:45 +01:00
Ryan Mulligan d14f102334
Merge pull request #44573 from vincentbernat/feature/cloudstack
nixos/cloudstack-image: initial import
2019-02-24 08:28:42 -08:00
Antoine Eiche d190b204f0 Rename novaImage to openstackImage
People don't necessary know `nova` is related to Openstack (it is a
component of Openstack). So, it is more explicit to call it
`openstackImage`.
2019-02-11 20:58:44 +01:00
Ding Xiang Fei 88570538b3 google-compute-image: make it a module and the size tuneable (#49854)
* move GCE system configuration to `google-compute-config.nix`
* remove `fetch-ssh-keys` service (disabled in comment)
2018-11-26 14:51:00 +00:00
Vincent Bernat 15f98b7192 nixos/cloudstack-image: initial import
Cloudstack images are simply using cloud-init. They are not headless
as a user usually have access to a console. Otherwise, the difference
with Openstack are mostly handled by cloud-init.

This is still some minor issues. Notably, there is no non-root user.
Other cloud images usually come with a user named after the
distribution and with sudo. Would it make sense for NixOS?

Cloudstack gives the user the ability to change the password.
Cloud-init support for this is imperfect and the set-passwords module
should be declared as `- [set-passwords, always]` for this to work. I
don't know if there is an easy way to "patch" default cloud-init
configuration. However, without a non-root user, this is of no use.

Similarly, hostname is usually set through cloud-init using
`set_hostname` and `update_hostname` modules. While the patch to
declare nixos to cloud-init contains some code to set hostname, the
previously mentioned modules are not enabled.
2018-11-17 20:40:11 +01:00
Eelco Dolstra b240822cfa create-amis.sh: Change directory for AMIs 2018-07-24 21:19:14 +02:00
volth 2e979e8ceb [bot] nixos/*: remove unused arguments in lambdas 2018-07-20 20:56:59 +00:00
Jörg Thalheim dbdad4b44b maintainers/create-azure.sh: remove hydra.nixos.org as binary cache (#41883) 2018-06-12 14:21:56 +02:00
Ihor Antonov 08ebd830a5 Fix kernel crash caused by absent root device 2018-05-12 02:55:33 +03:00
Ihor Antonov e4777ae2d8 Fix kernel panic on ec2 kvm instances caused by io timeout on nvme root volume 2018-05-12 02:55:33 +03:00
Maximilian Bosch 9274ea3903
treewide: rename version attributes
As suggested in https://github.com/NixOS/nixpkgs/pull/39416#discussion_r183845745
the versioning attributes in `lib` should be consistent to
`nixos/version` which implicates the following changes:

* `lib.trivial.version` -> `lib.trivial.release`
* `lib.trivial.suffix` -> `lib.trivial.versionSuffix`
* `lib.nixpkgsVersion` -> `lib.version`

As `lib.nixpkgsVersion` is referenced several times in `NixOS/nixpkgs`,
`NixOS/nix` and probably several user's setups. As the rename will cause
a notable impact it's better to keep `lib.nixpkgsVersion` as alias with
a warning yielded by `builtins.trace`.
2018-04-28 14:23:53 +02:00
Rob Vermaas b894dd8b82
Update create-gce.sh script. Set default option for GCE images to disable host key replacement by service.
(cherry picked from commit 748d96ffa3)
2018-04-06 10:57:31 +02:00
André-Patrick Bubel 26343e3a09 nixos/maintainers/option-usages.nix: Improve spelling and grammar 2018-04-02 01:46:24 +02:00
Tuomas Tynkkynen 962e79ef32 nixos/make-disk-image.nix: Support EFI images
- Add a new parameter `imageType` that can specify either "efi" or
  "legacy" (the default which should see no change in behaviour by
  this patch).

- EFI images get a GPT partition table (instead of msdos) with a
  mandatory ESP partition (so we add an assert that `partitioned`
  is true).

- Use the partx tool from util-linux to determine exact start + size
  of the root partition. This is required because GPT stores a secondary
  partition table at the end of the disk, so we can't just have
  mkfs.ext4 create the filesystem until the end of the disk.

- (Unrelated to any EFI changes) Since we're depending on the
  `-E offset=X` option to mkfs which is only supported by e2fsprogs,
  disallow any attempts of creating partitioned disk images where
  the root filesystem is not ext4.
2018-01-22 11:18:23 +02:00
Eelco Dolstra 014800706a
create-amis.sh: Ass eu-west-3 2017-12-20 16:35:22 +01:00
Dan Peebles 63f7456f6a amazon-image: make derivation name configurable
I'm getting dozens of nixos-disk-image entries in my store and it's
getting hard to track :)
2017-10-23 16:22:24 -04:00
Eelco Dolstra 6c72efe0ba
Don't generate instance-store AMIs
These are obsolete, use EBS AMIs instead.
2017-09-28 17:33:13 +02:00
Jan Tojnar 69698ec11c gnome3: only maintain single GNOME 3 package set (#29397)
* gnome3: only maintain single GNOME 3 package set

GNOME 3 was split into 3.10 and 3.12 in #2694. Unfortunately, we barely have the resources
to update a single version of GNOME. Maintaining multiple versions just does not make sense.
Additionally, it makes viewing history using most Git tools bothersome.

This commit renames `pkgs/desktops/gnome-3/3.24` to `pkgs/desktops/gnome-3`, removes
the config variable for choosing packageset (`environment.gnome3.packageSet`), updates
the hint in maintainer script, and removes the `gnome3_24` derivation from `all-packages.nix`.

Closes: #29329

* maintainers/scripts/gnome: Use fixed GNOME 3 directory

Since we now allow only a single GNOME 3 package set, specifying
the working directory is not necessary.

This commit sets the directory to `pkgs/desktops/gnome-3`.
2017-09-24 12:15:50 +01:00
lewo 3a377e26b2 nixos/nova-image: cleanup image builders (#29242)
There are currently two ways to build Openstack image. This just picks
best of both, to keep only one!

- Image is resizable
- Cloudinit is enable
- Password authentication is disable by default
- Use the same layer than other image builders (ec2, gce...)
2017-09-11 17:33:33 +01:00
Dan Peebles ca99ec3f58 amazon-image: fix typo in last commit 2017-08-11 02:12:39 +00:00
Dan Peebles 5def5bab3c amazon-image: make image size configurable 2017-08-11 01:57:43 +00:00
Dan Peebles 5f372ef67f amazon-image: support VPC/VHD as an output format for the builder 2017-08-10 22:57:26 +00:00
Dan Peebles f3f8c584a4 amazon-image: Add disk format option to image builder module 2017-08-10 21:40:42 +00:00
Dan Peebles f1708a9d7d make-disk-image: change to be less VM-centric
This changes much of the make-disk-image.nix logic (and thus most NixOS
image building) to use LKL to set up the target directory structure rather
than a Linux VM. The only work we still do in a VM is less IO-heavy stuff
that while still time-consuming, is less of the overall load. The goal is
to kill more of that stuff, but that will require deeper changes to NixOS
activation scripts and switch-to-configuration.pl, and I don't want to
bite off too much at once.
2017-04-24 02:30:00 +00:00
Jörg Thalheim 73c8797d16 gce/create-gce.sh: rewrite using nix-shell shebang and bash (#24869)
* google-cloud-sdk: 150.0.0 -> 151.0.0

- gce/create-gce.sh: rewrite using nix-shell shebang and bash
- allows to run the script without being the same directory
- nix-shell install google-cloud-sdk
- some shellcheck cleanups and scripting best practice
- gce/create-gce.sh: do not clobber NIX_PATH: this allows NIX_PATH to be overwritten to build a different release
- gce/create-gce.sh: remove legacy hydra option
2017-04-13 13:42:28 +02:00
Eelco Dolstra 279565c3d6
Revert "Revert "EC2: Disable PV support""
This reverts commit 71710fd099.
2017-04-04 13:03:05 +02:00
Jörg Thalheim 71710fd099
Revert "EC2: Disable PV support"
This reverts commit fbe6d23624.

this breaks every non-ec2 (non-hvm) system

cc @edolstra
2017-04-04 12:05:21 +02:00
Eelco Dolstra fbe6d23624
EC2: Disable PV support
Unfortunately, somewhere between 16.09 and 17.03, paravirtualized
instances stopped working. They hang at the pv-grub prompt
("grubdom>"). I tried reverting to a 4.4 kernel, reverting kernel
compression from xz to bzip2 (even though pv-grub is supposed to
support xz), and reverting the only change to initrd generation
(5a8147479e). Nothing worked so I'm
giving up.
2017-04-03 17:46:34 +02:00
Eelco Dolstra e6faf2a4e6
create-amis.sh: Use pv-grub-hd0_1.05 2017-04-03 17:46:34 +02:00
Antoine Eiche dec7ecbbbc nova-image: refactoring
The nova image configuration is separated from the image build.
2017-02-24 22:17:52 +01:00
Dan Peebles 49641e0de0 make-disk-image.nix: support additional filesystem contents
This makes make-disk-image.nix slightly more consistent with other image
builders we have. Unfortunately I duplicated some code in doing so, but
this is temporary duplication on the path to consolidating everything.
See https://github.com/NixOS/nixpkgs/issues/23052 for more details on that.

I'm also exposing the option in the amazon-image.nix maintainer module.
2017-02-22 23:49:49 +00:00
Eelco Dolstra a2b8ceb83a Create AMIs for ca-central-1 (Canada) 2017-02-19 23:19:07 +01:00
Eelco Dolstra 4e516363a8 Create AMIs for eu-west-2 (London) 2017-01-17 21:44:01 +01:00
Domen Kožar 49d608ac00 create-amis: use jq instead of json 2016-11-22 01:59:49 +01:00
Domen Kožar f940d65b2d create-amis: add us-east-2 2016-11-21 21:26:23 +01:00
Domen Kožar 1944c984c3 create-amis: order matters 2016-11-21 16:43:09 +01:00
Domen Kožar 6e08a55474 create-amis.sh: another dep needed for EBS images 2016-11-21 15:56:51 +01:00
Domen Kožar 67f3e2853b create-amis.sh: use nix-shell for convenience 2016-11-16 16:49:32 +01:00