Regex supported by `builtins.match` differ on Linux and Darwin
(see NixOS/Nix#1537) and the empty match group errors on Darwin.
But simply removing it does not change the logic in the module in any
way.
Secrets are injected from the environment into the rendered
configuration before each startup using envsubst.
The test now makes use of this feature for the server password.
powerDownCommands is supposed to run before shutdown, but the current
implementation only runs before-sleep, thus not enabling wakeonlan on
devices when powering off even if the hardware supports it.
Taking into consideration the possibility of unexpected shutdown, it is
preferable to move the commands to powerUpCommands instead which is
executed at boot time as well as after resume - that should cover all
use cases for wakeonlan.
Fixes#91352
- Use an acme user and group, allow group override only
- Use hashes to determine when certs actually need to regenerate
- Avoid running lego more than necessary
- Harden permissions
- Support "systemctl clean" for cert regeneration
- Support reuse of keys between some configuration changes
- Permissions fix services solves for previously root owned certs
- Add a note about multiple account creation and emails
- Migrate extraDomains to a list
- Deprecate user option
- Use minica for self-signed certs
- Rewrite all tests
I thought of a few more cases where things may go wrong,
and added tests to cover them. In particular, the web server
reload services were depending on the target - which stays alive,
meaning that the renewal timer wouldn't be triggering a reload
and old certs would stay on the web servers.
I encountered some problems ensuring that the reload took place
without accidently triggering it as part of the test. The sync
commands I added ended up being essential and I'm not sure why,
it seems like either node.succeed ends too early or there's an
oddity of the vm's filesystem I'm not aware of.
- Fix duplicate systemd rules on reload services
Since useACMEHost is not unique to every vhost, if one cert
was reused many times it would create duplicate entries in
${server}-config-reload.service for wants, before and
ConditionPathExists
There are circumstances where running secondary DHCP servers in
non-authoritative mode is advantageous. Retain the previous
authoritative behavior as a default.
This is necessary for VPNs where some of the nodes run pre-1.1 versions.
Most of Linux distros [0] and even the nixpkgs.tinc attribute run on that
version, so it might be useful to have that option.
[0] https://repology.org/project/tinc/versions
The resilio module places the directoryRoot configuration in the webui
section. However, the generated configuration fails on the current
version of Resilio Sync with:
Invalid key context: 'directory_root' must be in global config section
This change places this key in the global configuration section to
solve this error.
Build error introduced in fe7053f75a912197f312d890740dd3bdde0ed994:
parser error : Opening and ending tag mismatch: commmand line 6139 and command
escription><para>Base64 preshared key generated by <commmand>wg genpsk</command>
^
Writing "command" with only two "m" fixes building the NixOS manual.
Signed-off-by: aszlig <aszlig@nix.build>
This reverts commit d3a26a5ecd.
Using ServiceConfig.ExecStart instead of script lead to the content not
being executed in a shell anymore, which broke the secrets being read
from a file and passed as a command line parameter.
Currently the service doesn't detect if on of the packages is updated
and doesn't restart.
By manually adding a trigger we make sure the service restarts if any of
the involved packages update.
We remove the configFile build flag override in the NixOS module.
Instead of embedding the conf file link to the binaries, we symlink it
to /etc/nsd/nsd.nix, the hardcoded config file location for the
various CLI nsd utilities.
This config file build option override is triggerring a nsd rebuild
for each configuration change. This prevent us to use the nixos cache
in many cases.
Co-authored-by: Erjo <erjo@cocoba.work>
services.networking.firewall might have existed during import of this
module in 2016, but it is unknown as of today.
Point to the proper boolean knob to avoid confusion.
Following changes in https://github.com/NixOS/nixpkgs/pull/91092 the `path` attribute is now a list
instead of being a string. This resulted resulted in the following evaluation error:
"cannot coerce a list to a string, at [...]/nixos/modules/services/networking/openvpn.nix:16:18"
so we now need to convert it to the right type ourselves.
Closes https://github.com/NixOS/nixpkgs/issues/97360.
Refactor the systemd service definition for the haproxy reverse proxy,
using the upstream systemd service definition. This allows the service
to be reloaded on changes, preserving existing server state, and adds
some hardening options.
it does happen that `dnscrypt-proxy` exit when it is unable to
synchronise its resolvers metadata on startup. this can happen due
to network connectivity issues for example. not restarting it automatically
means no dns resolution will work until a manual restart is performed.
Favor the configuration in "configFile" over "config" to allow
"configFile" to override "config" without a system rebuild.
Add a "persistentKeys" option to generate keys and addresses that
persist across service restarts. This is useful for self-configuring
boot media.
Add extraConfig option for the muc submodule.
Also move the global extraConfig before all components and
virtualhosts, because the manual states:
The configuration is divided into two parts. The first part is known as
the "global" section. All settings here apply to the whole server, and
are the default for all virtual hosts.
The second half of the file is a series of VirtualHost and Component
definitions. Settings under each VirtualHost or Component line apply
only to that host.
Before, if at least one muc was defined, or uploadHttp enabled, the
global extraConfig would end up after "muc" or "http_upload" component
making it apply to that component only and not globally.
We add a Prosody entry to the NixOS manual showing how to setup a
basic XEP-0423 compliant Prosody service. This example also showcase
how to generate the associated ACME certificates.
Note: The <programlisting> body might look poorly indented, but trust
me, it's necessary. If we try to increase their indentation level, the
HTML output will end up containing a lot of unecesseray heading spaces
breaking the formatting...
The output file is found and handled by thelounge itself [1], leaving
the user free to override THELOUNGE_HOME in the environment if they
choose, but having a sensible default to make `thelounge` generally
usable in most cases.
This solution follows discussion on #70318.
[1] 9ef5c6c67e/src/command-line/utils.js (L56)
We are leveraging the systemd sandboxing features to prevent the
service accessing locations it shouldn't do. Most notably, we are here
preventing the prosody service from accessing /home and providing it
with a private /dev and /tmp.
Please consult man systemd.exec for further informations.
Setting up a XMPP chat server is a pretty deep rabbit whole to jump in
when you're not familiar with this whole universe. Your experience
with this environment will greatly depends on whether or not your
server implements the right set of XEPs.
To tackle this problem, the XMPP community came with the idea of
creating a meta-XEP in charge of listing the desirable XEPs to comply
with. This meta-XMP is issued every year under an new XEP number. The
2020 one being XEP-0423[1].
This prosody nixos module refactoring makes complying with XEP-0423
easier. All the necessary extensions are enabled by default. For some
extensions (MUC and HTTP_UPLOAD), we need some input from the user and
cannot provide a sensible default nixpkgs-wide. For those, we guide
the user using a couple of assertions explaining the remaining manual
steps to perform.
We took advantage of this substential refactoring to refresh the
associated nixos test.
Changelog:
- Update the prosody package to provide the necessary community
modules in order to comply with XEP-0423. This is a tradeoff, as
depending on their configuration, the user might end up not using them
and wasting some disk space. That being said, adding those will
allow the XEP-0423 users, which I expect to be the majority of
users, to leverage a bit more the binary cache.
- Add a muc submodule populated with the prosody muc defaults.
- Add a http_upload submodule in charge of setting up a basic http
server handling the user uploads. This submodule is in is
spinning up an HTTP(s) server in charge of receiving and serving the
user's attachments.
- Advertise both the MUCs and the http_upload endpoints using mod disco.
- Use the slixmpp library in place of the now defunct sleekxmpp for
the prosody NixOS test.
- Update the nixos test to setup and test the MUC and http upload
features.
- Add a couple of assertions triggered if the setup is not xep-0423
compliant.
[1] https://xmpp.org/extensions/xep-0423.html
Without this, you can change the list of appended or prepended nameservers in
your NetworkManager config, and nixos-rebuild doesn't cause those changes to
come into effect.
running the service in a sandbox. read-only root file system,
with tmpfs mounted in /tmp, hidden /root and /home,
temporary /dev. the only writeable path is the data directory,
which according to my experiments is enough for the service
to work correctly.
Many options define their example to be a Nix value without using
literalExample. This sometimes gets rendered incorrectly in the manual,
causing confusion like in https://github.com/NixOS/nixpkgs/issues/25516
This fixes it by using literalExample for such options. The list of
option to fix was determined with this expression:
let
nixos = import ./nixos { configuration = {}; };
lib = import ./lib;
valid = d: {
# escapeNixIdentifier from https://github.com/NixOS/nixpkgs/pull/82461
set = lib.all (n: lib.strings.escapeNixIdentifier n == n) (lib.attrNames d) && lib.all (v: valid v) (lib.attrValues d);
list = lib.all (v: valid v) d;
}.${builtins.typeOf d} or true;
optionList = lib.optionAttrSetToDocList nixos.options;
in map (opt: {
file = lib.elemAt opt.declarations 0;
loc = lib.options.showOption opt.loc;
}) (lib.filter (opt: if opt ? example then ! valid opt.example else false) optionList)
which when evaluated will output all options that use a Nix identifier
that would need escaping as an attribute name.
Previously, systemd.network.links was only respected with networkd
enabled, but it's really udev taking care of links, no matter if
networkd is enabled or not.
With our module fixed, there's no need to manually manage the text file
anymore.
This was originally applied in 3d1079a20d,
but was reverted due to 1115959a8d causing
evaluation errors on hydra.
Fixes some dependency ordering problems at boot time with services that
require DNS. Without Type=notify these services might be started before
stubby was ready to accept DNS requests.
Previously the assertion passed if the kernel had support OR the
filter was *enabled*. In the case of a kernel without support, the
`checkReversePath` option defaulted to false, and then failed the
assertion.
...even when networkd is disabled
This reverts commit ce78f3ac70, reversing
changes made to dc34da0755.
I'm sorry; Hydra has been unable to evaluate, always returning
> error: unexpected EOF reading a line
and I've been unable to reproduce the problem locally. Bisecting
pointed to this merge, but I still can't see what exactly was wrong.
Running haproxy with "DynamicUser = true" doesn't really work, since
it prohibits specifying a TLS certificate bundle with limited
permissions. This revives the haproxy user and group, but makes them
dynamically allocated by NixOS, rather than statically allocated. It
also adds options to specify which user and group haproxy runs as.
Previously, systemd.network.links was only respected with networkd
enabled, but it's really udev taking care of links, no matter if
networkd is enabled or not.
With our module fixed, there's no need to manually manage the text file
anymore.
Originally added in [1], and iwd added StateDirectory to its services
in [2] -- 4 days later.
("StateDirectory wasn't used when tmpfile snippet was added to NixOS")
(nevermind git -> release delay)
[1] 6e54e9253a
[2] upstream iwd git rev: 71ae0bee9c6320dae0083ed8c1700bc8fff1defb
In 87a19e9048 I merged staging-next into master using the GitHub gui as intended.
In ac241fb7a5 I merged master into staging-next for the next staging cycle, however, I accidentally pushed it to master.
Thinking this may cause trouble, I reverted it in 0be87c7979. This was however wrong, as it "removed" master.
This reverts commit 0be87c7979.
I merged master into staging-next but accidentally pushed it to master.
This should get us back to 87a19e9048.
This reverts commit ac241fb7a5, reversing
changes made to 76a439239e.
Minor incompatibilities due to moving to upstream defaults:
- capabilities are used instead of systemd.socket units
- the control socket moved:
/run/kresd/control -> /run/knot-resolver/control/1
- cacheDir moved and isn't configurable anymore
- different user+group names, without static IDs
Thanks Mic92 for multiple ideas.
