This also includes a full end-to-end CockroachDB clustering test to
ensure everything basically works. However, this test is not currently
enabled by default, though it can be run manually. See the included
comments in the test for more information.
Closes#51306. Closes#38665.
Co-authored-by: Austin Seipp <aseipp@pobox.com>
Signed-off-by: Austin Seipp <aseipp@pobox.com>
* run as user 'slurm' per default instead of root
* add user/group slurm to ids.nix
* fix default location for the state dir of slurmctld:
(/var/spool -> /var/spool/slurmctld)
* Update release notes with the above changes
This reverts commit 10addad603, reversing
changes made to 7786575c6c.
NixOS scripts should be kept in the NixOS source tree, not in
pkgs. Moving them around is just confusing and creates unnecessary
code/history churn.
This commit adds the following
* the uucp user
* options for HylaFAX server to control startup and modems
* systemd services for HylaFAX server processes
including faxgettys for modems
* systemd services to maintain the HylaFAX spool area,
including cleanup with faxcron and faxqclean
* default configuration for all server processes
for a minimal working configuration
Some notes:
* HylaFAX configuration cannot be initialized with faxsetup
(as it would be common on other Linux distributions).
The hylafaxplus package contains a template spool area.
* Modems are controlled by faxgetty.
Send-only configuration (modems controlled by faxq)
is not supported by this configuration setup.
* To enable the service, one or more modems must be defined with
config.services.hylafax.modems .
* Sending mail *should* work:
HylaFAX will use whatever is in
config.services.mail.sendmailSetuidWrapper.program
unless overridden with the sendmailPath option.
* The admin has to create a hosts.hfaxd file somewhere
(e.g. in /etc) before enabling HylaFAX.
This file controls access to the server (see hosts.hfaxd(5) ).
Sadly, HylaFAX does not permit account-based access
control as is accepts connections via TCP only.
* Active fax polling should work; I can't test it.
* Passive fax polling is not supported by HylaFAX.
* Pager transmissions (with sendpage) are disabled by default.
I have never tested or used these.
* Incoming data/voice/"extern"al calls
won't be handled by default.
I have never tested or used these.
Take two of #40708 (4fe2898608).
That PR attempted to bidirectionally default `config.nixpkgs.system` and
`config.nixpkgs.localSystem.system` to each be updated by the other. But
this is not possible with the way the module system works. Divergence in
certain cases in inevitable.
This PR is more conservative and just has `system` default `localSystem`
and `localSystem` make the final call as-is. This solves a number of
issues.
- `localSystem` completely overrides `system`, just like with nixpkgs
proper. There is no need to specify `localSystem.system` to clobber the
old system.
- `config.nixpkgs.localSystem` is exactly what is passed to nixpkgs. No
spooky steps.
- `config.nixpkgs.localSystem` is elaborated just as nixpkgs would so
that all attributes are available, not just the ones the user
specified.
The remaining issue is just that `config.nixpkgs.system` doesn't update
based on `config.nixpkgs.localSystem.system`. It should never be
referred to lest it is a bogus stale value because
`config.nixpkgs.localSystem` overwrites it.
Fixes#46320
- based on module originally written by @srhb
- complies with available options in cfssl v1.3.2
- uid and gid 299 reserved in ids.nix
- added simple nixos test case
This reverts commit 095fe5b43d.
Pointless renames considered harmful. All they do is force people to
spend extra work updating their configs for no benefit, and hindering
the ability to switch between unstable and stable versions of NixOS.
Like, what was the value of having the "nixos." there? I mean, by
definition anything in a NixOS module has something to do with NixOS...
My c6f7d43678 made the mistake of not
having enough defaults. Now both variables are default as the *explicit*
value of the other, or a fallback. The fallback of `system` is the
default of `localSystem.system`. The fallback of `localSystem` is not
the other default (projected), as that would cause a cycle, but `{
system = builtins.currentTime; }` just as nixpkgs itself does it.
lib.optional returns a singleton or an empty list. Therefore the
argument does not need to be wrapped in a list.
An alternative patch could have used lib.optionals but seems like no
more elements are going to be added to the optional list.
As suggested in https://github.com/NixOS/nixpkgs/pull/39416#discussion_r183845745
the versioning attributes in `lib` should be consistent to
`nixos/version` which implicates the following changes:
* `lib.trivial.version` -> `lib.trivial.release`
* `lib.trivial.suffix` -> `lib.trivial.versionSuffix`
* `lib.nixpkgsVersion` -> `lib.version`
As `lib.nixpkgsVersion` is referenced several times in `NixOS/nixpkgs`,
`NixOS/nix` and probably several user's setups. As the rename will cause
a notable impact it's better to keep `lib.nixpkgsVersion` as alias with
a warning yielded by `builtins.trace`.
I know that "devinfo" output does not currently exist, but so does "devman".
It is mentioned in the nixpkgs manual, but no derivation in nixpkgs actually uses it.
a) Some providers can update multiple domains - support that.
b) Make "zone" and "script" configurable. Some providers require these.
c) Instead of leaving the ddclient daemon running all the time, use a systemd
timer to kick it off.
d) Don't use a predefined user - run everything via DynamicUser
e) Add documentation
- `localSystem` is added, it strictly supercedes system
- `crossSystem`'s description mentions `localSystem` (and vice versa).
- No more weird special casing I don't even understand
TEMP
This fixes the `update-locatedb` service when using the `mlocate`
package.
The service as-is does not properly handle flags during update of the
relevant database when configured to use the `mlocate` package.
The man entry for `updatedb` associated with `mlocate` does not say
that it supports environment variables in place of command line flags,
whereas the `findutils` package's updatedb does so.
To support this distinction, we pass the relevant settings as flags to
the `updatedb` program when using the `mlocate` package.
Fixes#29279
We should be able to deploy a NixOS 18.03 system with the current nixops
stable release. Some options were renamed, so instead of
`mkRenamedOptionModule` we introduce them as read-only interal options
that won't be rendered in the manual.
Only the options that are needed to make nixops evaluations succeed were
added.
This commit should probably be reverted after or before the 18.09 release,
depending on the nixops 1.6 release.
The user will not get the warning that these have been renamed but
this change is mentioned in the release notes.
Fixes#34253.
I was mainly considering Jellyfish and Jaguar (and Jackrabbit).
Originally I was inclined for Jellyfish, but then I thought of the
release T-shirts someone makes and it didn't seem suitable...
Jaguar would keep the name referring to a car as well, but as a
not-too-old (Mac) OS version is codenamed that way, I didn't go for it.
Resolved the following conflicts (by carefully applying patches from the both
branches since the fork point):
pkgs/development/libraries/epoxy/default.nix
pkgs/development/libraries/gtk+/3.x.nix
pkgs/development/python-modules/asgiref/default.nix
pkgs/development/python-modules/daphne/default.nix
pkgs/os-specific/linux/systemd/default.nix
All 5 daemon types can be enabled and configured through the module and the module both creates the ceph.conf required but also creates and enables specific services for each daemon, based on the systemd service files that upstream provides.
Among other things, this will allow *2nix tools to output plain data
while still being composable with the traditional
callPackage/.override interfaces.
This can be disabled with the `withKerberos` flag if desired.
Make the relevant assertions lazy,
so that if an overlay is used to set kerberos to null,
a later override can explicitly set `withKerberos` to false.
Don't build with GSSAPI by default;
the patchset is large and a bit hairy,
and it is reasonable to follow upstream who has not merged it
in not enabling it by default.
This can be disabled with the `withKerberos` flag if desired.
Make the relevant assertions lazy,
so that if an overlay is used to set kerberos to null,
a later override can explicitly set `withKerberos` to false.
Don't build with GSSAPI by default;
the patchset is large and a bit hairy,
and it is reasonable to follow upstream who has not merged it
in not enabling it by default.
before:
- /var/run/memcached is a bad default for a socket path, since its
parent directory must be writeable by memcached.
- Socket directory was not created by the module itself -> this was
left as a burden to the user?
- Having a static uid with a dynamic user name is not very useful.
after:
- Replace services.memcached.socket by a boolean flag. This simplifies
our code, since we do not have to check if the user specifies a
path with a parent directory that should be owned by memcached
(/run/memcached/memcached.sock -> /run/memcached).
- Remove fixed uid/gid allocation. The only file ever owned by the
daemon is the socket that will be recreated on every start.
Therefore user and group ids do not need to be static.
- only create the memcached user, if the user has not specified a
different one. The major use case for changing option is to allow
existing services (such as php-fpm) opening the local unix socket.
If we would unconditionally create a user that option would be
useless.
The module would fail to evaluate:
```The option value `boot.crashDump.kernelPackages' in ... is not a package.```
Removed the option boot.crashDump.kernelPackage in favor of using
boot.kernelPatches which automatically chooses the same kernel version
as boot.kernelPackage instead of overriding it.
Added option boot.crashDump.reservedMemory to customized crash kernel
memory.
Changed the default of boot.crashDump.kernelParams as the current one
seemed to have no effect.
* lib: introduce imap0, imap1
For historical reasons, imap starts counting at 1 and it's not
consistent with the rest of the lib.
So for now we split imap into imap0 that starts counting at zero and
imap1 that starts counting at 1. And imap is marked as deprecated.
See c71e2d4235 (commitcomment-21873221)
* replace uses of lib.imap
* lib: move imap to deprecated.nix
* removed pid-file support, it is needless to run collectd as systemd service
* removed static user id, as all the files reowned on the service start
* added ambient capabilities for ping and smart (hdd health) functions
* fix/asterisk-module: use unix-group for asterisk-files
* fix/asterisk-module: add configOption to use some default config-files
* fix/asterisk-module: correction of skel copy
* fix/asterisk-module: use /etc/asterisk as configDir
* fix/asterisk-module: add reload; do not restart unit
* asterisk: 13.6.0 -> 14.1.2
* fix/asterisk: compile with lua, pjsip, format_mp3
* fix/asterisk: fix indentation
* fix/asterisk: remove broken flag
This commit introduces a nixos module for the Openstack Keystone
service. It also provides a optional bootstrap step that creates some
basic initial resources (tenants, endpoints,...).
The provided test starts Keystone by enabling bootstrapping and checks
if user creation works well.
This commit is based on initial works made by domenkozar.
riak-cs: added to all-packages
Added Riak CS nix file to pkgs
Added service file for Riak CS
Removed Erlang_basho specific bindings from the Riak CS repo
riak-cs: changed description
riak-cs: added license
riak-cs: added maintainer
riak_cs: chgned indentations
riak-cs: removed overly complex srcs mechanism
riak-cs: added systemd module
riak-cs: changed Erlang module to Basho-specific version
riak-cs: made modular form
riak-cs: Added a default package in service options
riak-cs: Fixed default package in service options
riak-cs: Patched Makefile
riak_cs: added to module-list
riak_cs: changed from string to actual package in modules
riak-cs: changed example
riak-cs: removed default
riak-cs: changed to defaultText
stanchion: changed default option to defaultText
riak-cs: added defaults; changed types to str
Let's first try if we can determine the Git revision from the .git
directory and if that fails, fall back to get the info from the
".git-revision" file... and after that use something generic like
"master".
This should address #17218 in better way, because we don't need to
create another redundant file in the source checkout of nixpkgs.
I'm not going to route of falling back to using .git, because after
55d881e, we already have ".git-revision" files in people's Git
repositories, which in turn means that nixos-version will report that
old file every time even if the working tree has updated.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @bennofs, Profpatsch
Reported-by: @devhell
Fixes: #17218
GoCD is an open source continuous delivery server specializing in advanced workflow
modeling and visualization. Update maintainers list to include swarren83. Update
module list to include gocd agent and server module. Update packages list to include
gocd agent and server package. Update version, revision and checksum for GoCD
release 16.5.0.
This GID was used to exempt users from Grsecurity's
`/proc` restrictions; we now prefer to rely on
`security.hideProcessInformation`, which uses the `proc` group
for this purpose. That leaves no use for the grsecurity GID.
More generally, having only a single GID to, presumably, serve as the
default for all of grsecurity's GID based exemption/resriction schemes
would be problematic in any event, so if we decide to enable those
grsecurity features in the future, more specific GIDs should be added.
This adds a Taskserver module along with documentation and a small
helper tool which eases managing a custom CA along with Taskserver
organisations, users and groups.
Taskserver is the server component of Taskwarrior, a TODO list
application for the command line.
The work has been started by @matthiasbeyer back in mid 2015 and I have
continued to work on it recently, so this merge contains commits from
both of us.
Thanks particularly to @nbp and @matthiasbeyer for reviewing and
suggesting improvements.
I've tested this with the new test (nixos/tests/taskserver.nix) this
branch adds and it fails because of the changes introduced by the
closure-size branch, so we need to do additional work on base of this.
It was failing with a `Read-only filesystem` failure due to the systemd
service option `ReadWriteDirectories` not being correctly configured.
Fixes#14132
This module adds an option `security.hideProcessInformation` that, when
enabled, restricts access to process information such as command-line
arguments to the process owner. The module adds a static group "proc"
whose members are exempt from process information hiding.
Ideally, this feature would be implemented by simply adding the
appropriate mount options to `fileSystems."/proc".fsOptions`, but this
was found to not work in vmtests. To ensure that process information
hiding is enforced, we use a systemd service unit that remounts `/proc`
after `systemd-remount-fs.service` has completed.
To verify the correctness of the feature, simple tests were added to
nixos/tests/misc: the test ensures that unprivileged users cannot see
process information owned by another user, while members of "proc" CAN.
Thanks to @abbradar for feedback and suggestions.
I'm renaming the attribute name for uid, because the user name is called
"taskd" so we should really use the same name for it.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
