This updates to the new runc as was also done upstream:
f3ef17e47d
In particular, it fixes an issue where output of interactive docker containers
would not reset correctly to the beginning of a line.
* pkgs: refactor needless quoting of homepage meta attribute
A lot of packages are needlessly quoting the homepage meta attribute
(about 1400, 22%), this commit refactors all of those instances.
* pkgs: Fixing some links that were wrongfully unquoted in the previous
commit
* Fixed some instances
Compiling the kernel modules on Linux 4.12 fails, so I've included an
upstream patch from:
https://www.virtualbox.org/changeset/66927/vbox
The patch is applied against the guest additions as well, where we need
to transform the patch a bit so that we get CR LF line endings (DOS
format), which is what is the case for the guest additions ISO.
I've tested this with all the subtests of the "virtualbox" NixOS VM
tests and they all succeed on x86_64-linux.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This commit contains security patches for xen 4.8. The patches
for XSA-216 applied to the kernel are omitted, as they are part of
80e0cda7ff.
XSA-216 Issue Description:
> The block interface response structure has some discontiguous fields.
> Certain backends populate the structure fields of an otherwise
> uninitialized instance of this structure on their stacks, leaking
> data through the (internal or trailing) padding field.
More: https://xenbits.xen.org/xsa/advisory-216.html
XSA-217 Issue Description:
> Domains controlling other domains are permitted to map pages owned by
> the domain being controlled. If the controlling domain unmaps such a
> page without flushing the TLB, and if soon after the domain being
> controlled transfers this page to another PV domain (via
> GNTTABOP_transfer or, indirectly, XENMEM_exchange), and that third
> domain uses the page as a page table, the controlling domain will have
> write access to a live page table until the applicable TLB entry is
> flushed or evicted. Note that the domain being controlled is
> necessarily HVM, while the controlling domain is PV.
More: https://xenbits.xen.org/xsa/advisory-217.html
XSA-218 Issue Description:
> We have discovered two bugs in the code unmapping grant references.
>
> * When a grant had been mapped twice by a backend domain, and then
> unmapped by two concurrent unmap calls, the frontend may be informed
> that the page had no further mappings when the first call completed rather
> than when the second call completed.
>
> * A race triggerable by an unprivileged guest could cause a grant
> maptrack entry for grants to be "freed" twice. The ultimate effect of
> this would be for maptrack entries for a single domain to be re-used.
More: https://xenbits.xen.org/xsa/advisory-218.html
XSA-219 Issue Description:
> When using shadow paging, writes to guest pagetables must be trapped and
> emulated, so the shadows can be suitably adjusted as well.
>
> When emulating the write, Xen maps the guests pagetable(s) to make the final
> adjustment and leave the guest's view of its state consistent.
>
> However, when mapping the frame, Xen drops the page reference before
> performing the write. This is a race window where the underlying frame can
> change ownership.
>
> One possible attack scenario is for the frame to change ownership and to be
> inserted into a PV guest's pagetables. At that point, the emulated write will
> be an unaudited modification to the PV pagetables whose value is under guest
> control.
More: https://xenbits.xen.org/xsa/advisory-219.html
XSA-220 Issue Description:
> Memory Protection Extensions (MPX) and Protection Key (PKU) are features in
> newer processors, whose state is intended to be per-thread and context
> switched along with all other XSAVE state.
>
> Xen's vCPU context switch code would save and restore the state only
> if the guest had set the relevant XSTATE enable bits. However,
> surprisingly, the use of these features is not dependent (PKU) or may
> not be dependent (MPX) on having the relevant XSTATE bits enabled.
>
> VMs which use MPX or PKU, and context switch the state manually rather
> than via XSAVE, will have the state leak between vCPUs (possibly,
> between vCPUs in different guests). This in turn corrupts state in
> the destination vCPU, and hence may lead to weakened protections
>
> Experimentally, MPX appears not to make any interaction with BND*
> state if BNDCFGS.EN is set but XCR0.BND{CSR,REGS} are clear. However,
> the SDM is not clear in this case; therefore MPX is included in this
> advisory as a precaution.
More: https://xenbits.xen.org/xsa/advisory-220.html
XSA-221 Issue Description:
> When polling event channels, in general arbitrary port numbers can be
> specified. Specifically, there is no requirement that a polled event
> channel ports has ever been created. When the code was generalised
> from an earlier implementation, introducing some intermediate
> pointers, a check should have been made that these intermediate
> pointers are non-NULL. However, that check was omitted.
More: https://xenbits.xen.org/xsa/advisory-221.html
XSA-222 Issue Description:
> Certain actions require removing pages from a guest's P2M
> (Physical-to-Machine) mapping. When large pages are in use to map
> guest pages in the 2nd-stage page tables, such a removal operation may
> incur a memory allocation (to replace a large mapping with individual
> smaller ones). If this allocation fails, these errors are ignored by
> the callers, which would then continue and (for example) free the
> referenced page for reuse. This leaves the guest with a mapping to a
> page it shouldn't have access to.
>
> The allocation involved comes from a separate pool of memory created
> when the domain is created; under normal operating conditions it never
> fails, but a malicious guest may be able to engineer situations where
> this pool is exhausted.
More: https://xenbits.xen.org/xsa/advisory-222.html
XSA-224 Issue Description:
> We have discovered a number of bugs in the code mapping and unmapping
> grant references.
>
> * If a grant is mapped with both the GNTMAP_device_map and
> GNTMAP_host_map flags, but unmapped only with host_map, the device_map
> portion remains but the page reference counts are lowered as though it
> had been removed. This bug can be leveraged cause a page's reference
> counts and type counts to fall to zero while retaining writeable
> mappings to the page.
>
> * Under some specific conditions, if a grant is mapped with both the
> GNTMAP_device_map and GNTMAP_host_map flags, the operation may not
> grab sufficient type counts. When the grant is then unmapped, the
> type count will be erroneously reduced. This bug can be leveraged
> cause a page's reference counts and type counts to fall to zero while
> retaining writeable mappings to the page.
>
> * When a grant reference is given to an MMIO region (as opposed to a
> normal guest page), if the grant is mapped with only the
> GNTMAP_device_map flag set, a mapping is created at host_addr anyway.
> This does *not* cause reference counts to change, but there will be no
> record of this mapping, so it will not be considered when reporting
> whether the grant is still in use.
More: https://xenbits.xen.org/xsa/advisory-224.html
This commit adds the xen_4_8 package to be used instead of
xen (currently at 4.5.5):
* Add packages xen_4_8, xen_4_8-slim and xen_4_8-light
* Add packages qemu_xen_4_8 and qemu_xen_4_8-light to be used
with xen_4_8-slim and xen_4_8-light respectively.
* Add systemd to buildInputs of xen (it is required by oxenstored)
* Adapt xen service to work with the new version of xen
* Use xen-init-dom0 to initlilise dom0 in xen-store
* Currently, the virtualisation.xen.stored option is ignored
if xen 4.8 is used
XSA-216 Issue Description:
> The block interface response structure has some discontiguous fields.
> Certain backends populate the structure fields of an otherwise
> uninitialized instance of this structure on their stacks, leaking
> data through the (internal or trailing) padding field.
More: https://xenbits.xen.org/xsa/advisory-216.html
XSA-217 Issue Description:
> Domains controlling other domains are permitted to map pages owned by
> the domain being controlled. If the controlling domain unmaps such a
> page without flushing the TLB, and if soon after the domain being
> controlled transfers this page to another PV domain (via
> GNTTABOP_transfer or, indirectly, XENMEM_exchange), and that third
> domain uses the page as a page table, the controlling domain will have
> write access to a live page table until the applicable TLB entry is
> flushed or evicted. Note that the domain being controlled is
> necessarily HVM, while the controlling domain is PV.
More: https://xenbits.xen.org/xsa/advisory-217.html
XSA-218 Issue Description:
> We have discovered two bugs in the code unmapping grant references.
>
> * When a grant had been mapped twice by a backend domain, and then
> unmapped by two concurrent unmap calls, the frontend may be informed
> that the page had no further mappings when the first call completed rather
> than when the second call completed.
>
> * A race triggerable by an unprivileged guest could cause a grant
> maptrack entry for grants to be "freed" twice. The ultimate effect of
> this would be for maptrack entries for a single domain to be re-used.
More: https://xenbits.xen.org/xsa/advisory-218.html
XSA-219 Issue Description:
> When using shadow paging, writes to guest pagetables must be trapped and
> emulated, so the shadows can be suitably adjusted as well.
>
> When emulating the write, Xen maps the guests pagetable(s) to make the final
> adjustment and leave the guest's view of its state consistent.
>
> However, when mapping the frame, Xen drops the page reference before
> performing the write. This is a race window where the underlying frame can
> change ownership.
>
> One possible attack scenario is for the frame to change ownership and to be
> inserted into a PV guest's pagetables. At that point, the emulated write will
> be an unaudited modification to the PV pagetables whose value is under guest
> control.
More: https://xenbits.xen.org/xsa/advisory-219.html
XSA-220 Issue Description:
> Memory Protection Extensions (MPX) and Protection Key (PKU) are features in
> newer processors, whose state is intended to be per-thread and context
> switched along with all other XSAVE state.
>
> Xen's vCPU context switch code would save and restore the state only
> if the guest had set the relevant XSTATE enable bits. However,
> surprisingly, the use of these features is not dependent (PKU) or may
> not be dependent (MPX) on having the relevant XSTATE bits enabled.
>
> VMs which use MPX or PKU, and context switch the state manually rather
> than via XSAVE, will have the state leak between vCPUs (possibly,
> between vCPUs in different guests). This in turn corrupts state in
> the destination vCPU, and hence may lead to weakened protections
>
> Experimentally, MPX appears not to make any interaction with BND*
> state if BNDCFGS.EN is set but XCR0.BND{CSR,REGS} are clear. However,
> the SDM is not clear in this case; therefore MPX is included in this
> advisory as a precaution.
More: https://xenbits.xen.org/xsa/advisory-220.html
XSA-221 Issue Description:
> When polling event channels, in general arbitrary port numbers can be
> specified. Specifically, there is no requirement that a polled event
> channel ports has ever been created. When the code was generalised
> from an earlier implementation, introducing some intermediate
> pointers, a check should have been made that these intermediate
> pointers are non-NULL. However, that check was omitted.
More: https://xenbits.xen.org/xsa/advisory-221.html
XSA-222 Issue Description:
> Certain actions require removing pages from a guest's P2M
> (Physical-to-Machine) mapping. When large pages are in use to map
> guest pages in the 2nd-stage page tables, such a removal operation may
> incur a memory allocation (to replace a large mapping with individual
> smaller ones). If this allocation fails, these errors are ignored by
> the callers, which would then continue and (for example) free the
> referenced page for reuse. This leaves the guest with a mapping to a
> page it shouldn't have access to.
>
> The allocation involved comes from a separate pool of memory created
> when the domain is created; under normal operating conditions it never
> fails, but a malicious guest may be able to engineer situations where
> this pool is exhausted.
More: https://xenbits.xen.org/xsa/advisory-222.html
XSA-224 Issue Description:
> We have discovered a number of bugs in the code mapping and unmapping
> grant references.
>
> * If a grant is mapped with both the GNTMAP_device_map and
> GNTMAP_host_map flags, but unmapped only with host_map, the device_map
> portion remains but the page reference counts are lowered as though it
> had been removed. This bug can be leveraged cause a page's reference
> counts and type counts to fall to zero while retaining writeable
> mappings to the page.
>
> * Under some specific conditions, if a grant is mapped with both the
> GNTMAP_device_map and GNTMAP_host_map flags, the operation may not
> grab sufficient type counts. When the grant is then unmapped, the
> type count will be erroneously reduced. This bug can be leveraged
> cause a page's reference counts and type counts to fall to zero while
> retaining writeable mappings to the page.
>
> * When a grant reference is given to an MMIO region (as opposed to a
> normal guest page), if the grant is mapped with only the
> GNTMAP_device_map flag set, a mapping is created at host_addr anyway.
> This does *not* cause reference counts to change, but there will be no
> record of this mapping, so it will not be considered when reporting
> whether the grant is still in use.
More: https://xenbits.xen.org/xsa/advisory-224.html
The merge of the version bump in
6fb9f89238 didn't take care of our patch
for the hardening mode and thus enabling VirtualBox without also
force-disabling hardening mode will result in a build error.
While the patch is largely identical with the old version, I've removed
one particular change around the following code:
if (pFsObjState->Stat.st_mode & S_IWOTH)
return supR3HardenedSetError3(VERR_SUPLIB_WORLD_WRITABLE, pErrInfo,
"World writable: '", pszPath, "'");
In the old version of the patch we have checked whether the path is
within the Nix store and suppressed the error return if that's the case.
The reason why I did that in the first place was because we had a bunch
of symlinks which were writable.
In VirtualBox 5.1.22 the code specifically checks whether the file is a
symlink, so we can safely drop our change.
Tested via all of the "virtualbox" NixOS VM subtests and they now all
succeed.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
XSA-206 Issue Description:
> xenstored supports transactions, such that if writes which would
> invalidate assumptions of a transaction occur, the entire transaction
> fails. Typical response on a failed transaction is to simply retry
> the transaction until it succeeds.
>
> Unprivileged domains may issue writes to xenstore which conflict with
> transactions either of the toolstack or of backends such as the driver
> domain. Depending on the exact timing, repeated writes may cause
> transactions made by these entities to fail indefinitely.
More: https://xenbits.xen.org/xsa/advisory-206.html
XSA-211 Issue Description:
> When a graphics update command gets passed to the VGA emulator, there
> are 3 possible modes that can be used to update the display:
>
> * blank - Clears the display
> * text - Treats the display as showing text
> * graph - Treats the display as showing graphics
>
> After the display geometry gets changed (i.e., after the CIRRUS VGA
> emulation has resized the display), the VGA emulator will resize the
> console during the next update command. However, when a blank mode is
> also selected during an update, this resize doesn't happen. The resize
> will be properly handled during the next time a non-blank mode is
> selected during an update.
>
> However, other console components - such as the VNC emulation - will
> operate as though this resize had happened. When the display is
> resized to be larger than before, this can result in a heap overflow
> as console components will expect the display buffer to be larger than
> it is currently allocated.
More: https://xenbits.xen.org/xsa/advisory-211.html
XSA-212 Issue Description:
> The XSA-29 fix introduced an insufficient check on XENMEM_exchange
> input, allowing the caller to drive hypervisor memory accesses outside
> of the guest provided input/output arrays.
More: https://xenbits.xen.org/xsa/advisory-212.html
XSA-213 Issue Description:
> 64-bit PV guests typically use separate (root) page tables for their
> kernel and user modes. Hypercalls are accessible to guest kernel
> context only, which certain hypercall handlers make assumptions on.
> The IRET hypercall (replacing the identically name CPU instruction)
> is used by guest kernels to transfer control from kernel mode to user
> mode. If such an IRET hypercall is placed in the middle of a multicall
> batch, subsequent operations invoked by the same multicall batch may
> wrongly assume the guest to still be in kernel mode. If one or more of
> these subsequent operations involve operations on page tables, they may
> be using the wrong root page table, confusing internal accounting. As
> a result the guest may gain writable access to some of its page tables.
More: https://xenbits.xen.org/xsa/advisory-213.html
XSA-214 Issue Description:
> The GNTTABOP_transfer operation allows one guest to transfer a page to
> another guest. The internal processing of this, however, does not
> include zapping the previous type of the page being transferred. This
> makes it possible for a PV guest to transfer a page previously used as
> part of a segment descriptor table to another guest while retaining the
> "contains segment descriptors" property.
>
> If the destination guest is a PV one of different bitness, it may gain
> access to segment descriptors it is not normally allowed to have, like
> 64-bit code segments in a 32-bit PV guest.
>
> If the destination guest is a HVM one, that guest may freely alter the
> page contents and then hand the page back to the same or another PV
> guest.
>
> In either case, if the destination PV guest then inserts that page into
> one of its own descriptor tables, the page still having the designated
> type results in validation of its contents being skipped.
More: https://xenbits.xen.org/xsa/advisory-214.html
XSA-215 Issue Description:
> Under certain special conditions Xen reports an exception resulting
> from returning to guest mode not via ordinary exception entry points,
> but via a so call failsafe callback. This callback, unlike exception
> handlers, takes 4 extra arguments on the stack (the saved data
> selectors DS, ES, FS, and GS). Prior to placing exception or failsafe
> callback frames on the guest kernel stack, Xen checks the linear
> address range to not overlap with hypervisor space. The range spanned
> by that check was mistakenly not covering these extra 4 slots.
More: https://xenbits.xen.org/xsa/advisory-215.html
Recent commit #c10af9e744c91dff1ccc07a52a0b57d1e4d339f3 changed the
behaviour of wrapPythonPrograms, which caused pygrub to no longer
being wrapped. This commit fixes this.
- Moves to a more recent kernel (4.10, I think ...)
- API break re the previous version
- cptofs: fix root directory copy
- add support for disks with custom ops
- add LKL_HIJACK_NET_QDISC to configure qdisc policy
- add LKL_HIJACK_SYSCTL to configure sysctl values
OVMF{,CODE,VARS}.fd are now available in a dedicated fd output, greatly
reducing the closure in the common case where only those files are used (a
few MBs versus several hundred MBs for the full OVMF).
Note: it's unclear why `dontPatchELF` is now necessary for the build to
pass (on my end, at any rate) but it doesn't make much sense to run this
fixup anyway,
Note: my reading of xen's INSTALL suggests that --with-system-ovmf should
point directly to the OVMF binary. As such, the previous invocation was
incorrect (it pointed to the root of the OVMF tree). In any case, I have
only built xen with `--with-system-ovmf`, I have not tested it.
Fixes https://github.com/NixOS/nixpkgs/issues/25854
Closes https://github.com/NixOS/nixpkgs/pull/25855
OVMF is built from edk2 sources so that's where its version number comes
from (logically). The edk2 version number is 2014-12-10, so this change
only ensures the version numbers won't drift apart in the future. (There
is no hash change.)
This reverts commit 3a4e2376e4.
The reverted commit caused the fix for CVE-2016-9602 not to be applied
for qemu_test because it conflicts with the force-uid0-on-9p.patch.
So with the rebase of the patch on top of the changes of the
CVE-2016-9602.patch, both patches no longer conflict with each other.
I've tested this with the "misc" NixOS test and it succeeds.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
New upstream patch function and patches for fixing a bug in the patch for
CVE-2017-5667 and the following security issues:
* CVE-2016-7907
* CVE-2016-9602
* CVE-2016-10155
* CVE-2017-2620
* CVE-2017-2630
* CVE-2017-5525
* CVE-2017-5526
* CVE-2017-5579
* CVE-2017-5856
* CVE-2017-5857
* CVE-2017-5987
* CVE-2017-6058
Also:
* provides a bunch of build options
* documents build options config in longDescription
* provides a bunch of predefined packages and documents them some more
* sources' hashes stay the same
Fixes:
* CVE-2017-2615
* CVE-2017-5667
* CVE-2017-5898
* CVE-2017-5931
* CVE-2017-5973
We are vulnerable to even more CVEs but those are either not severe like
memory leaks in obscure situations or upstream hasn't acknowledged the
patch yet.
cc #23072
XSA-197 Issue Description:
> The compiler can emit optimizations in qemu which can lead to double
> fetch vulnerabilities. Specifically data on the rings shared
> between qemu and the hypervisor (which the guest under control can
> obtain mappings of) can be fetched twice (during which time the
> guest can alter the contents) possibly leading to arbitrary code
> execution in qemu.
More: https://xenbits.xen.org/xsa/advisory-197.html
XSA-199 Issue Description:
> The code in qemu which implements ioport read/write looks up the
> specified ioport address in a dispatch table. The argument to the
> dispatch function is a uint32_t, and is used without a range check,
> even though the table has entries for only 2^16 ioports.
>
> When qemu is used as a standalone emulator, ioport accesses are
> generated only from cpu instructions emulated by qemu, and are
> therefore necessarily 16-bit, so there is no vulnerability.
>
> When qemu is used as a device model within Xen, io requests are
> generated by the hypervisor and read by qemu from a shared ring. The
> entries in this ring use a common structure, including a 64-bit
> address field, for various accesses, including ioport addresses.
>
> Xen will write only 16-bit address ioport accesses. However,
> depending on the Xen and qemu version, the ring may be writeable by
> the guest. If so, the guest can generate out-of-range ioport
> accesses, resulting in wild pointer accesses within qemu.
More: https://xenbits.xen.org/xsa/advisory-199.html
XSA-207 Issue Description:
> Certain internal state is set up, during domain construction, in
> preparation for possible pass-through device assignment. On ARM and
> AMD V-i hardware this setup includes memory allocation. On guest
> teardown, cleanup was erroneously only performed when the guest
> actually had a pass-through device assigned.
More: https://xenbits.xen.org/xsa/advisory-207.html
XSA-209 Issue Description:
> When doing bitblt copy backwards, qemu should negate the blit width.
> This avoids an oob access before the start of video memory.
More: https://xenbits.xen.org/xsa/advisory-208.html
XSA-208 Issue Description:
> In CIRRUS_BLTMODE_MEMSYSSRC mode the bitblit copy routine
> cirrus_bitblt_cputovideo fails to check wethehr the specified memory
> region is safe.
More: https://xenbits.xen.org/xsa/advisory-209.html
Putting information in external JSON files is IMHO not an improvement
over the idiomatic style of Nix expressions. The use of JSON doesn't
add anything over Nix expressions (in fact it removes expressive
power). And scattering package info over lots of little files makes
packages less readable over having the info in one file.
`DOCKER_GITCOMMIT` needs to match the tagged commit used to build the
binary. The current commit refers to 1.12.1 and wasn't update each
time we updated the package. Using a variable near the version and
adding a comment so we don't forget to update next time.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
- Update docker version to 1.13.0.
- Introduce now docker-proxy package (from libnetmork).
- Use overrideDerivation to set the correct version for docker.
- Update tini to make sure we can build it static.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This brings VirtualBox to the latest upstream version, which also fixes
building the modules against kernel 4.9.0.
Tested against all the the "virtualbox" subtests on x86_64-linux.
The "misc" NixOS test is using Nix to query the store and it tries to
change the ownership of it while doing so.
This fails if Nix is not in a seccomp-sandboxed userid namespace, so
let's make chown() a no-op when applied to store paths.
Fixes the misc test (and possibly future tests) on older Nix versions.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Enables support for accessing files over HTTP:
qemu-system-x86_64 -drive media=cdrom,file=http://host/path.iso,readonly
Increases the closures size from 445 to 447 MiB.
The reason to patch QEMU is that with latest Nix, tests like "printing"
or "misc" fail because they expect the store paths to be owned by uid 0
and gid 0.
Starting with NixOS/nix@5e51ffb1c2, Nix
builds inside of a new user namespace. Unfortunately this also means
that bind-mounted store paths that are part of the derivation's inputs
are no longer owned by uid 0 and gid 0 but by uid 65534 and gid 65534.
This in turn causes things like sudo or cups to fail with errors about
insecure file permissions.
So in order to avoid that, let's make sure the VM always gets files
owned by uid 0 and gid 0 and does a no-op when doing a chmod on a store
path.
In addition, this adds a virtualisation.qemu.program option so that we
can make sure that we only use the patched version if we're *really*
running NixOS VM tests (that is, whenever we have imported
test-instrumentation.nix).
Tested against the "misc" and "printing" tests.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
From LWN:
From the NVD entries:
CVE-2016-5501: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.0.28 and 5.1.x before 5.1.8 in Oracle
Virtualization allows local users to affect confidentiality,
integrity, and availability via vectors related to Core, a different
vulnerability than CVE-2016-5538.
CVE-2016-5538: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.0.28 and 5.1.x before 5.1.8 in Oracle
Virtualization allows local users to affect confidentiality,
integrity, and availability via vectors related to Core, a different
vulnerability than CVE-2016-5501.
CVE-2016-5605: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.1.4 in Oracle Virtualization allows remote
attackers to affect confidentiality and integrity via vectors related
to VRDE.
CVE-2016-5608: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.0.28 and 5.1.x before 5.1.8 in Oracle
Virtualization allows local users to affect availability via vectors
related to Core, a different vulnerability than CVE-2016-5613.
CVE-2016-5610: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.0.28 and 5.1.x before 5.1.8 in Oracle
Virtualization allows local users to affect confidentiality,
integrity, and availability via vectors related to Core.
CVE-2016-5611: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.0.28 and 5.1.x before 5.1.8 in Oracle
Virtualization allows local users to affect confidentiality via
vectors related to Core.
CVE-2016-5613: Unspecified vulnerability in the Oracle VM VirtualBox
component before 5.0.28 and 5.1.x before 5.1.8 in Oracle
Virtualization allows local users to affect availability via vectors
related to Core, a different vulnerability than CVE-2016-5608.
As of systemd 231, the LD_LIBRARY_PATH fix applied in the installPhase of rkt's
build was no longer valid, causing rkt to fail to work. This patch changes the
path to point to the new location of libsystemd, which is in ${systemd.lib}.
This introduces VirtualBox version 5.1.6 along with a few refactored
stuff, notably:
* Kernel modules and user space applications are now separate
derivations.
* If config.pulseaudio doesn't exist in nixpkgs config, the default is
now to build with PulseAudio modules.
* A new updater to keep VirtualBox up to date.
All subtests in nixos/tests/virtualbox.nix succeed on my machine and
VirtualBox was reported to be working by @DamienCassou (although with
unrelated audio problems for another fix/branch) and @calbrecht.
