###### Motivation for this change
With space between two options, multiple options just don't work
Looks like xkbOptions then used for generation of xorg.conf.d/00-keyboard.conf.
kbd's man says XkbOptions must be comma-separated without spaces.
https://linux.die.net/man/4/kbd
###### Things done
<!-- Please check what applies. Note that these are not hard requirements but merely serve as information for reviewers. -->
- [ ] Tested using sandboxing ([nix.useSandbox](http://nixos.org/nixos/manual/options.html#opt-nix.useSandbox) on NixOS, or option `sandbox` in [`nix.conf`](http://nixos.org/nix/manual/#sec-conf-file) on non-NixOS linux)
- Built on platform(s)
- [ ] NixOS
- [ ] macOS
- [ ] other Linux distributions
- [ ] Tested via one or more NixOS test(s) if existing and applicable for the change (look inside [nixos/tests](https://github.com/NixOS/nixpkgs/blob/master/nixos/tests))
- [ ] Tested compilation of all pkgs that depend on this change using `nix-shell -p nixpkgs-review --run "nixpkgs-review wip"`
- [ ] Tested execution of all binary files (usually in `./result/bin/`)
- [ ] Determined the impact on package closure size (by running `nix path-info -S` before and after)
- [ ] Ensured that relevant documentation is up to date
- [ ] Fits [CONTRIBUTING.md](https://github.com/NixOS/nixpkgs/blob/master/.github/CONTRIBUTING.md).
###### Notify maintainers
cc @
This reverts commit eec83d41e3.
This broke hydra evaluation because with this commit submodule values
are allowed to be paths, however the certmgr module uses `either
(submodule ...) path` in its type, meaning it already used paths for
something else which would now be interpreted as a submodule.
This fixes the patch for nginx to clear the Last-Modified header if a
static file is served from the Nix store.
So far we only used the ETag from the store path, but if the
Last-Modified header is always set to "Thu, 01 Jan 1970 00:00:01 GMT",
Firefox and Chrome/Chromium seem to ignore the ETag and simply use the
cached content instead of revalidating.
Alongside the fix, this also adds a dedicated NixOS VM test, which uses
WebDriver and Firefox to check whether the content is actually served
from the browser's cache and to have a more real-world test case.
Currently if you specify home to be someplace else than ~/ for user
then Transmissions always attempts to load the config from the
default location which is $HOME/.config/transmission-daemon based on documentation:
https://github.com/transmission/transmission/wiki/Configuration-Files
Which means that the changes done to the config under settingsDir in
ExecPreStart have no effect because they are modifying a file that is never loaded.
I've added an explicit --config-dir ${settingsDir} to make sure
that Transmission loads the correct config file even when home is changed.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Previously, we were storing the leader pid in a runtime file and
signalled SIGRTMIN+4 manually.
In systemd 219, the `machinectl poweroff` command was introduced, which
does that for us.
* structured config for main config file allows to launch nagios in
debug mode without having to write the whole config file by hand
* build time syntax check
* all options have types, one more example
* I find it misleading that the main nagios config file is linked in
/etc but that if you change the link in /etc/ and restart nagios, it
has no effect. Have nagios use /etc/nagios.cfg
* fix paths in example nagios config files, which allows to reuse it:
services.nagios.objectDefs =
(map (x: "${pkgs.nagios}/etc/objects/${x}.cfg")
[ "templates" "timeperiods" "commands" ]) ++ [ ./main.cfg ]
* for the above reason, add mailutils to default plugins
Co-Authored-By: Aaron Andersen <aaron@fosslib.net>
This is what I've suspected a while ago[1]:
> Heads-up everyone: After testing this in a few production instances,
> it seems that some browsers still get cache hits for new store paths
> (and changed contents) for some reason. I highly suspect that it might
> be due to the last-modified header (as mentioned in [2]).
>
> Going to test this with last-modified disabled for a little while and
> if this is the case I think we should improve that patch by disabling
> last-modified if serving from a store path.
Much earlier[2] when I reviewed the patch, I wrote this:
> Other than that, it looks good to me.
>
> However, I'm not sure what we should do with Last-Modified header.
> From RFC 2616, section 13.3.4:
>
> - If both an entity tag and a Last-Modified value have been
> provided by the origin server, SHOULD use both validators in
> cache-conditional requests. This allows both HTTP/1.0 and
> HTTP/1.1 caches to respond appropriately.
>
> I'm a bit nervous about the SHOULD here, as user agents in the wild
> could possibly just use Last-Modified and use the cached content
> instead.
Unfortunately, I didn't pursue this any further back then because
@pbogdan noted[3] the following:
> Hmm, could they (assuming they are conforming):
>
> * If an entity tag has been provided by the origin server, MUST
> use that entity tag in any cache-conditional request (using If-
> Match or If-None-Match).
Since running with this patch in some deployments, I found that both
Firefox and Chrome/Chromium do NOT re-validate against the ETag if the
Last-Modified header is still the same.
So I wrote a small NixOS VM test with Geckodriver to have a test case
which is closer to the real world and I indeed was able to reproduce
this.
Whether this is actually a bug in Chrome or Firefox is an entirely
different issue and even IF it is the fault of the browsers and it is
fixed at some point, we'd still need to handle this for older browser
versions.
Apart from clearing the header, I also recreated the patch by using a
plain "git diff" with a small description on top. This should make it
easier for future authors to work on that patch.
[1]: https://github.com/NixOS/nixpkgs/pull/48337#issuecomment-495072764
[2]: https://github.com/NixOS/nixpkgs/pull/48337#issuecomment-451644084
[3]: https://github.com/NixOS/nixpkgs/pull/48337#issuecomment-451646135
Signed-off-by: aszlig <aszlig@nix.build>
xsession gets passed `dm` `wm`, so the desktop manager would be launched
before the window manager resulting in a regular desktop manager
session.
Fixes https://github.com/NixOS/nixpkgs/issues/76625
This fixes a harmless error from systemd-udevd that looks like:
Dec 23 15:35:23 dellbook systemd-udevd[696]:
/nix/store/iixya3ni5whybpq9zz1h7f4pyw7nhd19-udev-rules/99-local.rules:25
Invalid value "..." for RUN (char 101: invalid substitution type),
ignoring, but please fix it.
Using $$ fixes it using the escaping documented at https://www.freedesktop.org/software/systemd/man/udev.html.
When using format-strings, curly brackets need to be escaped using `{{`
to avoid errors from python.
And apparently, Perl's `==` is used to compare substrings[1] which is why
the translation to `assert http_code == "304"` failed as the string
contains several headers from curl.
[1] Just check `perl <(echo 'die "alarm" if "foo\n304" == 304')`
The commit b0bbacb521 was a bit too fast
It did set executable bit for log files.
Also, it didn't account for other directories in state dir:
```
# ls -la /var/spool/nginx/
total 32
drwxr-x--- 8 nginx nginx 4096 Dec 26 12:00 .
drwxr-xr-x 4 root root 4096 Oct 10 20:24 ..
drwx------ 2 root root 4096 Oct 10 20:24 client_body_temp
drwx------ 2 root root 4096 Oct 10 20:24 fastcgi_temp
drwxr-x--- 2 nginx nginx 4096 Dec 26 12:00 logs
drwx------ 2 root root 4096 Oct 10 20:24 proxy_temp
drwx------ 2 root root 4096 Oct 10 20:24 scgi_temp
drwx------ 2 root root 4096 Oct 10 20:24 uwsgi_temp
```
With proposed change, only ownership is changed for state files, and mode is left as is
except that statedir/logs is now group accessible.
This change brings pre-existing installations (where the logfiles
are owned by root) in line with the new permssions (where logfiles
are owned by the nginx user)
Currently to run borg job manually, you have to use systemctl:
```
$ systemctl start borgbackup-job-jobname.service
```
This commit makes wrappers around borg jobs available in $PATH, which have
BORG_REPO and connection args set correctly:
```
$ borg-job-jobname list
$ borg-job-jobname mount ::jobname-archive-2019-12-25T00:01:29 /mnt/some-path
$ borg-job-jobname create ::test /some/path
```
Closes: https://github.com/NixOS/nixpkgs/pull/64888
Co-authored-by: Danylo Hlynskyi <abcz2.uprola@gmail.com>