sheevaplug kernel, so the kernel does not build in the sheevaplug right now.
I will try to fix that in next commits.
svn path=/nixpkgs/branches/stdenv-updates/; revision=19045
source regions which are substituded by the tool nix-repository-manager.
See http://github.com/MarcWeber/nix-repository-manager/raw/master/README.
sourceByName is called sourceFromHead now.
updates: MPlayerTrunk, haxe, neko, netsurf, cinelerra, ctags
cinelerra does no longer build due to Xorg update
svn path=/nixpkgs/trunk/; revision=18894
- I still have not understood why it worked without this fix before, and I think
this has been triggered by the gcc-4.4, but I have not investigated this much. I
went with the trivial fix.
Adding a glibc-2.10.1 expression, because the glibc-2.11 still does not have
a ports release, so it cannot be used in arm. I'm using it only in native
compilation by now.
Making the default glibc to be 2.10 instead of 2.11 in armv5tel-linux.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18688
- Disabling guile test, because one fails. I commented on that in the source.
On cross builds:
- Adding stripping
- Updating the glibc-2.11 expression to match the parameters of glibc-2.9,
which I was updating more.
- Renaming from selfNativeBuildInput to selfBuildNativeInput, so this matches
better the pattern buildNativeInputs.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18550
- Before this changes, cflags and ldflags for the native and the cross compiler
got mixed. Not all the gcc-wrapper/gcc-cross-wrapper variables are
independant now, but enough, I think.
- Fixed the generic stdenv expression, which did a big mess on buildInputs and
buildNativeInputs. Now it distinguishes when there is a stdenvCross or not.
Maybe we should have a single stdenv and forget about the stdenvCross
adapter - this could end in a stdenv a bit complex, but simpler than the
generic stdenv + adapter.
- Added basic support in pkgconfig for cross-builds: a single PKG_CONFIG_PATH
now works for both the cross and the native compilers, but I think this
should work well for most cases I can think of.
- I tried to fix the guile expression to cross-biuld; guile is built, but not
its manual, so the derivation still fails. Guile requires patching to
cross-build, as far as I understnad.
- Made the glibcCross build to be done through the usage of a
gcc-cross-wrapper over the gcc-cross-stage-static, instead of using it
directly.
- Trying to make physfs (a neverball dependency) cross build.
- Updated the gcc expression to support building a cross compiler without getting
derivation variables mixed with those of the stdenvCross.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18534
- Stating better the guile dependencies (native/host) for guile to build
- Fixing cross-linking, through --rpath-link (ld(1) explains well about it
- Made gcc call the linker and the assembler through the gcc wrapper instead of
directly. I thought this was the source of missing -rpath's, but the source
of the problem ended up being the lack of --rpath-link. But I think the
native gcc calls the wrapped ld and as, so let's do the same cross
compiling.
- Removed the binutilsCross from the glibc expressions. Now they are built
using the gcc-cross-wrapper, and they were built with the direct gcc and
binutils before this change.
- I think patchelf and strip don't break the cross-compiled binaries, so I
reallow them on cross compilation.
- I disable the checkPhase on cross compilation. This made gmp and libtool
fail when cross compiled, iirc.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18498
linking path), and with this achieved bash being cross-compilable.
I fixed the few expressions involved in bash building, so they have well stated
native and non-native inputs.
I also tried to cross-build guile, and with this I found a problem in the
actual cross-gcc: it calls the binutils ld, instead of the ld wrapper. This
way, the programs/shared_libraries don't get the proper -rpath.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18497
This comes from:
svn diff ^/nixpkgs/trunk/@18255 ^/nixpkgs/branches/stdenv-updates/ > diff
patch -p0 < diff
and then adding into svn all files new from the patch.
trunk@18255 comes from the last time I updated stdenv-updates from trunk.
svn path=/nixpkgs/stdenv-updates2/; revision=18272
* Dropped "nolongdouble.patch". The patch no longer applies to Python 2.6, and
apparently isn't required anymore either.
* Added access to native Darwin arch utility. Python tries to run 'arch' in
the configure stage, but that binary reside in /usr/bin. To make it
available to the expression, the small wrapper darwinArchUtility is added as
a buildInput if appropriate.
* Don't pass --enable-shared. The build fails if we try to enable building of
shared libraries, apparently because some required libraries aren't linked,
i.e. the linker call isn't right.
TODO:
* Figure out how to enable shared linking.
* The resulting binary on Darwin seem to lack the binascii module.
svn path=/nixpkgs/trunk/; revision=17894
The build succeeds on i686-linux. Other platforms look good, too,
because there were hardly any changes necessary to update the expression
from 2.5.
svn path=/nixpkgs/trunk/; revision=17889
On MacOS X, we used to use the native perl interpreter from /usr/bin.
Unfortunately, that interpreter fails to build a number of packages
(Subversion, Git, etc. ...), because it assumes knowledge about the
underlying C compiler that is not valid for the compiler used by Nix.
For example, /usr/bin/perl assumes that the compiler can build binaries
for both the ppc and the x86 architecture. /usr/bin/gcc can do that, but
the gcc from Nix can't.
The solution is to compile Perl 5.10 in Nix so that the ./configure
phase can properly detect the system's capabilities. However, note that
the resulting binary is impure: it will find headers in /usr/include and
libraries in /usr/lib. In this respect, the Nix-compiled perl binary is
no different than the native one in /usr/bin -- it's just configured
more accurately.
svn path=/nixpkgs/trunk/; revision=17870
On MacOS X, we used to use the native perl interpreter from /usr/bin.
Unfortunately, that interpreter fails to build a number of packages
(Subversion, Git, etc. ...), because it assumes knowledge about the underlying
C compiler that is not valid for the compiler used by Nix. For example,
/usr/bin/perl assumes that the compiler can build binaries for both the ppc and
the x86 architecture. /usr/bin/FCC can do that, but the gcc from Nix can't.
The solution is to compile Perl 5.10 via Nix so that it can properly configure
itself. However, note that the resulting binary is impure: it will find headers
in /usr/include and libraries in /usr/lib -- something a pure perl binary
wouldn't do. In this respect our Nix-compiled perl binary is not better than
the native one from /usr/bin -- it's just more accurately configured.
svn path=/nixpkgs/trunk/; revision=17618
ACL2 = A Computational Logic for Applicative Common Lisp. It is
a Lisp sublanguage and a correctness prover for it.
svn path=/nixpkgs/trunk/; revision=16708
I thought I didn't change stdenv, but I did. This will go soon into the stdenv
branch then.
Reverse-merging r16467 through r16465.
svn path=/nixpkgs/trunk/; revision=16468
sup,gem:
* no longer requires /homeless-shelter to be built
* sup, gem can be run immediately without exporting GEM_HOME
ruby-support:
* using mirror server of rubyforge
* [..] is added at the end of long truncated long descriptions
svn path=/nixpkgs/trunk/; revision=16408
PHP builds an internal copy of sqlite, and we get into trouble when
other Apache modules use a dynamically linked sqlite. For instance,
Subversion 1.6 barfs with "(20014)Internal error: SQLite compiled for
3.6.12, but running with 3.3.7".
svn path=/nixpkgs/trunk/; revision=15587
builders. These are redundant now.
* Inlined some trivial builders.
* Removed a few explicit setup-hook creations. This is done
automatically now if setupHook is set.
* Deleted the initscripts package. NixOS doesn't use it anymore.
svn path=/nixpkgs/branches/stdenv-updates/; revision=15276
default, but it didn't happen in Nixpkgs because the string "perl"
appeared in the prefix, and in that case Perl uses $out/lib.
* Enable thread-safe Perl while we're at it.
svn path=/nixpkgs/branches/stdenv-updates/; revision=15252
* setup.sh: removed some obsolete features, specifically some that
were only used by the old build farm.
* addToSearchPath: removed some parameters that weren't used
anywhere.
svn path=/nixpkgs/branches/stdenv-updates/; revision=15136
the package).
* Removed the old ghc-wrapper, which hasn't been used for a long time.
* Renamed the "boot" GHC to "binary", which is more descriptive.
(They *can* be used for other things than bootstrapping a GHC
source build.)
* Updated the GHC 6.10.1 binary to 6.10.2.
svn path=/nixpkgs/trunk/; revision=15095
applyAndFun has a bug resulting in the same arg beeing added more than
once when using a concatenating merge function for the attr set.
I've tried giving the function a name "overridableDelayableArgs" which
resembles its usage much more.
important refactoring:
applyAndFun had .fun and .funMerge only when passing the merge
function lib.mergeOrApply
composableDerivation {
initial = {
...
};
}
to
overridableDelayableArgs has always .replace and .merge
composableDerivation {} {
...
}
svn path=/nixpkgs/trunk/; revision=14428
mess. Also cleaned up some functions:
- foldl appeared broken (it recursively called fold).
- Renamed logicalAND/logicalOR to and/or.
- Removed listOfListsToAttrs, eqStrings: obsolete.
- Removed isInList, which does the same thing as elem.
- stringToCharacters: don't return a "" at the end of the list.
- Renamed concatList to concat, as concatList (singular) is a
misnomer: it takes two lists. Likewise, renamed mergeAttr to
mergeAttrs.
misc.nix still contains a lot of stuff that should be refactored and
moved to other files.
svn path=/nixpkgs/trunk/; revision=14013
I've forgotten to comment out a name preventing filtering out a half finished derivation.
(The missing glib is passed using fix by the following code)
svn path=/nixpkgs/trunk/; revision=13555
- Updated full-maude to 2.4.
- Added program wrapper to set ${MAUDE_LIB} correctly.
- TODO: the documentation is still not quite up-to-date.
svn path=/nixpkgs/trunk/; revision=13303
TODO: The full-maude distribution is missing from the web site. The
expression installs 2.3j until that is fixed. Also, the documentation
that's installed isn't up-to-date yet, it's from version 2.3.
svn path=/nixpkgs/trunk/; revision=13285
since it has full support for running XUL applications. This saves
a lot of space (you don't need two copies of basically the same
software).
* Deleted the old xulrunner (1.8.0.4), it didn't compile anyway with
recent GTK.
* Updated chatzilla to 0.9.83.
svn path=/nixpkgs/trunk/; revision=12794
This patch moves curly braces to the end of the line, i.e.
foo = {
...
};
instead of the previously used style:
foo =
{
...
};
I commit this change hoping that my contributions to this project now conform
to the rules described in maintainers/docs/coding-conventions.txt so that the
self-appointed indention sheriff of the NixOS community can finally get off my
back and rest assured knowing that all i's are dotted and all t's are crossed.
svn path=/nixpkgs/trunk/; revision=12386
Warning: This makes `nix-worker' hang at the very end of the process,
once "make install" has completed and all installed files have been
scanned for references.
svn path=/nixpkgs/trunk/; revision=11099
merge cleanly right away (kde-4, kernel stuff) so it should be
merged later. But the stdenv stuff is all there.
svn path=/nixpkgs/branches/stdenv-updates-merge/; revision=10793
