Currently the `rpc-gssd.service` has a `ConditionPathExists` clause that can
never be met, because it's looking for stateful data inside `/nix/store`.
`auth-rpcgss-module.service` also only starts if this file exists.
FixesNixOS/nixpkgs#29509.
When the user specifies the networking.nameservers setting in the
configuration file, it must take precedence over automatically
derived settings.
The culprit was services.bind that made the resolver set to
127.0.0.1 and ignore the nameserver setting.
This patch adds a flag to services.bind to override the nameserver
to localhost. It defaults to true. Setting this to false prevents the
service.bind and dnsmasq.resolveLocalQueries settings from
overriding the users' settings.
Also, when the user specifies a domain to search, it must be set in
the resolver configuration, even if the user does not specify any
nameservers.
(cherry picked from commit 670b4e29ad)
This commit was accidentally merged to 17.09 but was intended for
master. This is the cherry-pick to master.
Previously services depending on network-online.target would wait until
dhcpcd times out if it was enabled and a static network address
configuration was used. Setting the default gateway statically is enough
for the networking to be considered online.
This also adjusts the relevant networking tests to wait for
network-online.target instead of just network.target.
If neither database.password or database.passwordFile were provided,
it would try and fail to coerce null to a string.
This fixes the situation where there is no password for the database.
Resolves#27950
This option got introduced in 7904499542
and it didn't check whether mailUser and mailGroup are null, which they
are by default.
Now we're only creating the user if createMailUser is set in conjunction
with mailUser and the group if mailGroup is set as well.
I've added a NixOS VM test so that we can verify whether dovecot works
without any additional options set, so it serves as a regression test
for issue #29466 and other issues that might come up with future changes
to the Dovecot service.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Fixes: #29466
Cc: @qknight, @abbradar, @ixmatus, @siddharthist
the systemd.unit(5) discussion of wantedBy and requiredBy is in the
[Install] section, and thus focused on stateful 'systemctl enable'.
so, clarify that in NixOS, wantedBy & requiredBy are still what most
users want, and not to be confused with enabled.
Arguably, breaking linux-latest should not block a release. Also, booting
the kernel + basic sanity checking is implicitly exercised by every other
vm test.
For various reasons, big Nix attrsets look ugly in the generated manual
page[1]. Use literalExample to fix it.
[1] Quotes around attribute names are lost, newlines inside multi-line
strings are shown as '\n' and attrs written on multiple lines are joined
into one.
Quoting from @FRidh:
Note overridePythonAttrs exists since 17.09. It overrides the call to
buildPythonPackage.
While it's not strictly necessary to do this, because postPatch ends up
in drvAttrs anyway, it's probably better to use overridePythonAttrs so
we don't run into problems when the underlying implementation of
buildPythonPackage changes.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Boot fails when a keyfile is configured for all encrypted filesystems
and no other luks devices are configured. This is because luks support is only
enabled in the initrd, when boot.initrd.luks.devices has entries. When a
fileystem has a keyfile configured though, it is setup by a custom
command, not by boot.initrd.luks.
This commit adds an internal config flag to enable luks support in the
initrd file, even if there are no luks devices configured.
Since 67651d80bc the requests package now
depends on certifi, which in turn provides the CA root certificates that
we need to replace.
It might also be a good idea to actually patch certifi with our version
of cacert by default so that if we want to override and/or add something
we only need to do it once.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @fpletz, @k0ral, @FRidh
The enableSSL option has been deprecated in
a912a6a291, so we switch to using onlySSL.
I've also explicitly disabled enableACME, because this is the default
and we don't actually want to have ACME enabled for a host which runs an
actual ACME server.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The test here is pretty basic and only tests nginx, but it should get us
started to write tests for different webservers and different ACME
implementations.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
These modules implement a way to test ACME based on a test instance of
Letsencrypt's Boulder service. The service implementation is in
letsencrypt.nix and the second module (resolver.nix) is a support-module
for the former, but can also be used for tests not involving ACME.
The second module provides a DNS server which hosts a root zone
containing all the zones and /etc/hosts entries (except loopback) in the
entire test network, so this can be very useful for other modules that
need DNS resolution.
Originally, I wrote these modules for the Headcounter deployment, but
I've refactored them a bit to be generally useful to NixOS users. The
original implementation can be found here:
https://github.com/headcounter/deployment/tree/89e7feafb/modules/testing
Quoting parts from the commit message of the initial implementation of
the Letsencrypt module in headcounter/deployment@95dfb31110:
This module is going to be used for tests where we need to
impersonate an ACME service such as the one from Letsencrypt within
VM tests, which is the reason why this module is a bit ugly (I only
care if it's working not if it's beautiful).
While the module isn't used anywhere, it will serve as a pluggable
module for testing whether ACME works properly to fetch certificates
and also as a replacement for our snakeoil certificate generator.
Also quoting parts of the commit where I have refactored the same module
in headcounter/deployment@85fa481b34:
Now we have a fully pluggable module which automatically discovers
in which network it's used via the nodes attribute.
The test environment of Boulder used "dns-test-srv", which is a fake
DNS server that's resolving almost everything to 127.0.0.1. On our
setup this is not useful, so instead we're now running a local BIND
name server which has a fake root zone and uses the mentioned node
attribute to automatically discover other zones in the network of
machines and generate delegations from the root zone to the
respective zones with the primaryIPAddress of the node.
...
We want to use real letsencrypt.org FQDNs here, so we can't get away
with the snakeoil test certificates from the upstream project but
now roll our own.
This not only has the benefit that we can easily pass the snakeoil
certificate to other nodes, but we can (and do) also use it for an
nginx proxy that's now serving HTTPS for the Boulder web front end.
The Headcounter deployment tests are simulating a production scenario
with real IPs and nameservers so it won't need to rely on
networking.extraHost. However in this implementation we don't
necessarily want to do that, so I've added auto-discovery of
networking.extraHosts in the resolver module.
Another change here is that the letsencrypt module now falls back to
using a local resolver, the Headcounter implementation on the other hand
always required to add an extra test node which serves as a resolver.
I could have squashed both modules into the final ACME test, but that
would make it not very reusable, so that's the main reason why I put
these modules in tests/common.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
10k staging builds are not yet finished on Hydra (mostly darwin),
but we now have a 20k jobs rebuilding directly on master, so we would
never get to merge this way...
It doesn't look good when the initial admin user is named
"<hash>-gitolite-admin" and the key stored as
"<hash>-gitolite-admin.pub". Instead, make it simply "gitolite-admin"
and "gitolite-admin.pub".
* prometheus-collectd-exporter service: init module
Supports JSON and binary (optional) protocol
of collectd.
* nixos/prometheus-collectd-exporter: submodule is not needed for collectdBinary
There are currently two ways to build Openstack image. This just picks
best of both, to keep only one!
- Image is resizable
- Cloudinit is enable
- Password authentication is disable by default
- Use the same layer than other image builders (ec2, gce...)
- sysctl is new and never succeeded on i686-linux
> cannot stat /proc/sys/net/core/bpf_jit_enable: No such file or directory
- testing plasma5 on i686 would defeat part of the reason why we ended
supporting i686 (lots of stuff built on Hydra)
Update physlock to a more current version which supports PAM and
systemd-logind. Amongst others, this should work now with the slim
login manager without any additional configuration, because it does
not rely on the utmp mechanism anymore.
The section was strange to read, as the initial example already used
`listOf' which is mentioned in the very first paragraph. Then you read
in a subsection about `listOf' and the exact same example is given
once again.
This file was removed in 6f0b538044, but sufficient care was not taken
to remove all references to it. Without this change, trying to
rebuild nixos fails.
I realize that advanced users like to configure services with Nix
attrsets, but I don't think we should remove the option to use the
(configuration) language provided by upstream.
When keys get refreshed a folder with the permissions of the root user
get created in the home directory of the user dnscrypt-wrapper. This
prevents the service from restarting.
In addition to that the parameters of dnscrypt-wrapper have
changed in upstream and in the newly packaged software.
Grub configs include the NixOS version and date they were built, now
systemd can have fun too:
version Generation 99 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-30
version Generation 100 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-30
version Generation 101 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-08-31
version Generation 102 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-09-01
version Generation 103 NixOS 17.03.1700.51a83266d1, Linux Kernel 4.9.43, Built on 2017-09-02
version Generation 104 NixOS 17.09beta41.1b8c7786ee, Linux Kernel 4.9.46, Built on 2017-09-02
version Generation 105 NixOS 17.09.git.1b8c778, Linux Kernel 4.9.46, Built on 2017-09-02
I missed this in 799435b7ca.
This time I used "git grep -F pythonPackages.deluge" just to be sure :-)
Thanks a lot to @roconnor for spotting this.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Reported-by: @roconnor
The latest release of libyamlcpp in nixpkgs does not build because it
uses an older version of boost than the one in nixpkgs and therefore
expects a particular header file which does not exist in the latest
boost anymore. For this reason, a later (git) version of libyamlcpp is
used here (which actually doesn't even require boost).
The substituteInPlace in the prePatch phase is needed because libevdev
places its headers in non-standard places, meaning Nix cannot normally
find them. The `cut` command removes the first two "-I" characters from
the output of `pkg-config`. This needs to be in the prePatch phase
because otherwise Nix will patch these lines to `/var/empty`, meaning
you would have less specific replacement (in case other lines are also
patched to `/var/empty`).
I wrote the patch. (I believe it is NixOS specific.)
Regression introduced by fa5e343242.
The deluge package no longer resides in pythonPackages but now is a
top-level package.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Cc: @grantwwu, @fpletz
previous mkDefault did not work as expected,
as it did not overwrite the original submodule's defaults when the user
did not specify any custom options at all.
if the nginx option is used.
Noted that either webServerUser or nginx option is mandatory.
Also introduce an assertion if both are not set,
and a warning if both are set.
Resolves#27704.
instead of redeclaring part of the options. Backward-compatible change.
This gives the same flexibility to the user as nginx itself.
This also resolves the piwik module break from nginx' enableSSL introduction from #27426.
Previously, if proxy_set_header would be used in an extraConfig of
a location, the headers defined in the http block by
recommendedProxySettings would be cleared. As this is not the intended
behaviour, these settings are now included from a separate file if
needed.
This version should have more conventional regexes that work across many
platforms and regex engines. This is an issue because up until Nix 1.11,
Nix called out to the libc regex matcher, which behaved differently on
Darwin and Linux. And in Nix 1.12, we're moving to std::regex which will
also behave differently here.
And yes, I do actually evaluate make-disk-image.nix on Darwin ;)
Additional CUPS drivers can be added via "services.printing.drivers" but
Gutenprint was an exception. It was possible to add a Gutenprint
derivation to that list and it would work at first but unlike the other
drivers Gutenprint requires a script to be run after each update or any
attempt to print something would simply fail and an error would show up
in the jobs queue (http://localhost:631/jobs/):
"The PPD version (5.2.11) is not compatible with Gutenprint 5.2.13.
Please run
`/nix/store/7762kpyhfkcgmr3q81v1bbyy0bjhym80-gutenprint-5.2.13/sbin/cups-genppdupdate'
as administrator."
This is due to state in "/var/lib/cups/ppd" and one would need to run
"/nix/store/.../bin/cups-genppdupdate -p /var/lib/cups/ppd" manually.
The alternative was to enable the following option:
"services.printing.gutenprint" but this had two disadvantages:
1) It is an exception that one could be unaware of or that could
potentially cause some confusion.
2) One couldn't use a customized Gutenprint derivation in
"services.printing.drivers" but would instead have to overwrite
"pkgs.gutenprint".
This new approach simply detects a Gutenprint derivation in
"services.printing.gutenprint" by checking if the meta set of a
derivation contains "isGutenprint = true". Therefore no special
exception for Gutenprint would be required and it could easily be
applied to other drivers if they would require such a script to be run.
This is a squash commit of the joint work from:
* Jan Tojnar (@jtojnar)
* Linus Heckemann (@lheckemann)
* Ryan Mulligan (@ryantm)
* romildo (@romildo)
* Tom Hunger (@teh)
* nixos/usbguard: create package and module
No usbguard module or package existed for NixOS previously. USBGuard
will protect you from BadUSB attacks. (assuming configuration is done
correctly)
* nixos/usbguard: remove extra packages
Users can override this by themselves.
* nixos/usbguard: add maintainer and fix style
Regression introduced by 520a43ced3.
Using XML tag characters for things that are not tags needs to be
properly indicated by an entity.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
There was no documentation for the "config" option, and it wasn't quite
clear whether it was supposed to be a file, a string, or what. This
commit removes that ambiguity.
The installer tests are failing after 505e94256e
due to `nixos-rebuild switch` in the installed system trying to build
stdenvNoCC.
Seems that previously, stdenvNoCC wasn't in the installed
system either, but all the direct dependencies for the build were
(I don't really understand why, for that matter), so the building
actually went fine and everything worked.
But now gcc is also a direct build dependency due to allowedRequisites
containing gcc (even though it doesn't become a runtime dependency)
which doesn't get to the installed system.
All in all, let's ensure stdenvNoCC actually gets to the installed
system. It's after all necessary in almost any NixOS config build.
