Most of the skaware packages already build just fine with pkgsStatic,
however the wrapper scripts for execline and stdnotify-wrapper needed
the `-lskarlib` argument to go at the end.
`utmps` and `nsss` still fail with this error:
```
exec ./tools/install.sh -D -m 600 utmps-utmpd /bin/utmps-utmpd
/build/utmps-0.0.3.1/tools/install.sh: line 48: can't create /bin/utmps-utmpd.tmp.479: Permission denied
make: *** [Makefile:121: /bin/utmps-utmpd] Error 1
```
Hello,
New versions of all the skarnet.org packages are available.
This is mostly a bugfix release (there was an installation bug in
some circumstances with shared libraries) but some packages, notably
execline and s6, have new, useful features.
The new versions are the following:
skalibs-2.9.2.0
nsss-0.0.2.2
utmps-0.0.3.2
execline-2.6.0.0
s6-2.9.1.0
s6-rc-0.5.1.2
s6-linux-init-1.0.4.0
s6-dns-2.3.2.0
s6-networking-2.3.1.2
s6-portable-utils-2.2.2.2
s6-linux-utils-2.5.1.2
mdevd-0.1.1.2
bcnm-0.0.1.0
Here are details for the packages that have more than bugfixes:
* skalibs-2.9.2.0
---------------
- New header: skalibs/bigkv.h. It's a set of functions allowing
efficient lookups in a large set of strings (typically read from the
command line or the environment).
https://skarnet.org/software/skalibs/
git://git.skarnet.org/skalibs
* execline-2.6.0.0
----------------
- It's a major release because an API has been modified: dollarat.
Beforehand, dollarat's -0 option would always prevail over any -d
option. Now, dollarat has its conflicting -0 and -d options handled
in the conventional way, with rightmost priority.
- The runblock program now accepts a command line prefix, which is
given as runblock's own command line. This allows blocks to serve as
arguments to a new command, instead of having to be full command lines
by themselves.
- New binary: posix-umask.
- The former "cd" program is now named "execline-cd" and the former
"umask" program is named "execline-umask". When the=20
--enable-pedantic-posix
option is not given at configure time, "cd" and "umask" are symbolic
links created at installation time and pointing to execline-cd and
execline-umask respectively. When the --enable-pedantic-posix option is
given, the symbolic links point to posix-cd and posix-umask instead.
- With posix-cd and posix-umask (and the changes to wait done in the
previous version), execline is now fully POSIX-compliant when built with
the --enable-pedantic-posix option. This will certainly, without the
slightest hint of a doubt, change distributions' attitudes about it.
https://skarnet.org/software/execline/
git://git.skarnet.org/execline
* s6-2.9.1.0
----------
- A new '?' directive has been added to s6-log. It behaves exactly like
'!', except that it spawns the given processor with /bin/sh as an
interpreter instead of execlineb.
- execline support is now optional: it can be disabled by specifying
--disable-execline at configure time. Some functionality is unavailable
when execline support is disabled:
* s6-log's '!' directive
* s6-notifyoncheck's -c option
* s6-ipcserver-access's support for 'exec' directives in a ruleset
- A new -X option has been added to s6-svscan, to specify a descriptor
that will be passed as stderr to a service spawned by this s6-svscan and
named s6-svscan-log. This is used in the new s6-linux-init, to avoid
needing to hardcode the /dev/console name for the catch-all logger's
standard error.
- On systems that define SIGPWR and SIGWINCH, s6-svscan -s now diverts
those signals. This allows powerfail and kbrequest events to be handled
when s6-svscan runs as process 1.
https://skarnet.org/software/s6/
git://git.skarnet.org/s6
* s6-linux-init-1.0.4.0
---------------------
- New options have been added to s6-linux-init-maker: to support
running s6-linux-init without a catch-all logger, and to support running
it in a container.
- s6-linux-init-maker now adds a SIGPWR handler to the default image:
on receipt of a SIGPWR, the system's shutdown procedure is triggered.
- s6-linux-init now handles kbrequest, which triggers a SIGWINCH in
init when a special, configurable set of keys is pressed. By default,
no SIGWINCH handler is declared in the image, and no set of keys is
bound to kbrequest.
https://skarnet.org/software/s6-linux-init/
git://git.skarnet.org/s6-linux-init
* s6-dns-2.3.2.0
--------------
- New library: libdcache, implementing a clean cache structure
to contain DNS data. It's still not used at the moment.
https://skarnet.org/software/s6-dns/
git://git.skarnet.org/s6-dns
* bcnm-0.0.1.0
------------
- First numbered release, because the Ad=C3=A9lie Linux distribution,
which uses libwpactrl, needs an official release instead of pulling
from git.
- libwpactrl is a set of C functions helping control a wpa_supplicant
process.
- bcnm-waitif is a binary that waits for network interface state
events such as appearance/disappearance, up/down, running/not-running.
It is useful to avoid race conditions during a boot sequence, for
instance.
https://skarnet.org/software/bcnm/
git://git.skarnet.org/bcnm
Enjoy,
Bug-reports welcome.
--
Laurent
I don't think there's any situation in which an unwrapped execlineb is
useful -- if you want to use different versions of the execlineb tool
it'll still prefer ones in PATH. At the same time, implementing the
wrapper in this way, as a series of two derivations, meant that we
didn't get stdenv goodness for the wrapper. This meant that, for
example, the wrapper was not stripped, and so execline ended up with
runtime dependencies on gcc and the Linux headers. I don't want to
have to reimplement this sort of stuff when it's already in stdenv,
and so it makes much more sense to create the wrapper in the
mkDerivation call, where all of stdenv's normal magic will find it.
Instead of using execlineb to define the execlineb wrapper, we replace
it by a little C wrapper.
This is mainly done because on non-Linux systems (i.e. mainly macOS),
it is impossible for a shebang interpreter to be itself a shebang
script.
It is, however, perfectly fine to have a chain that goes
shebang -> ELF -> shebang -> ELF -> …
Co-Authored-By: Laurent Bercot <ska-skaware@skarnet.org>
Introduces the `execlineb-with-builtins` flag, which when
true (default) will add all execline builtins to the PATH of
`execlineb`.
This is usually what users expect.
If the flag is set to `false`, the unpatched execline derivation is
returned instead.
Using wrapProgram adds a call to `bash` around every call
of `execline`, which clearly misses the basic idea behind
`execline` in the first place …
This reverts commit b64d25c447.
The execlineb program is the launcher (and lexer) of execline scripts.
So it makes a lot of sense to have all the small tools in scope by
default.
We append to the end of PATH so that they can be easily overwritten by
the user.
Co-authored-by: Alyssa Ross <hi@alyssa.is>
Introduce a `skawarePackages.buildPackage` function that contains the
common setup, removing a lot of duplication.
In particular, we require that the build directory has to be empty
after the `fixupPhase`, to make sure every relevant file is moved to
the outputs.
A next step would be to deduplicate the `configureFlags` attributes
and only require a `skawareInputs` field.
The configure scripts have been changed so that `--build` is now the
way to specify (non-cross compiling) build target, which is necessary
on darwin for binary compatibility across darwin versions.
execline: 2.1.4.5 -> 2.2.0.0
s6-dns: 2.0.0.7 -> 2.1.0.0
s6-linux-utils: 2.0.2.3 -> 2.2.0.0
s6-networking: 2.1.0.4 -> 2.2.1.0
s6-portable-utils: 2.1.0.0 -> 2.1.0.0 (no version change)
s6-rc: 0.0.2.1 -> 0.1.0.0
s6: 2.2.4.3 -> 2.4.0.0
skalibs: 2.3.9.0 -> 2.4.0.1
Also use new --enable-absolute-paths configure arg to correctly set
paths to runtime executables to point within the nix store rather than
relying on PATH resolution.
skalibs:
execline:
s6-dns:
s6-networking:
s6-portable-utils:
s6-rc:
s6:
The above software uses the target triplet from `cc -dumpmachine` as a
binary compatibility check. However, on darwin, the output includes the
darwin version number, which leads to build failures against a binary
skalibs package built a different version of darwin than the current
system.
Explicitly setting target ensures code can be compiled against a skalibs
binary built on a different version of darwin.
See http://www.skarnet.org/cgi-bin/archive.cgi?1:mss:623:heiodchokfjdkonfhdph
The website gives no indication that version 4.x is required to build
this package, and even it if were, then there should be an override in
all-packages.nix instead of referring to the 'gnumake40' attribute
directly in this expression.
New build system using configure script and GNU Make 4.0, and new
releases of the following using the new build system:
execline 2.0.0.0
s6 2.0.0.0
s6-dns 2.0.0.0
s6-linux-utils 2.0.0.0
s6-networking 2.0.0.0
s6-portable-utils 2.0.0.0
skalibs 2.0.0.0
