This was supposed to go through a pull request
Revert "nodePackages: Regenerate node packages for nodejs 10 & 12"
This reverts commit 6a17bdf397.
Revert "nodejs-8_x: Drop package"
This reverts commit e06c97b71d.
This is more robust than setting via environment variable, though it does come
later in the load sequence. An added benefit is affecting the current
session.
PHP 7.1 is currently on life support, as in only recieving security related patches.
This will only continue until: 2019-12-01
This date are in the middle of the 19.09 lifecycle. So it would be
nice to not have it in the 19.09 stable release. Dropping it now would
also result in less maintanance in updating them.
The death dates can be seen on following links:
- https://endoflife.date/php
- https://php.net/supported-versions.php
- https://en.wikipedia.org/wiki/PHP#Release_history
These options were being set to the same value as the defaults that are
hardcoded in nscd. Delete them so it's clear which settings are actually
important for NixOS.
One exception is `threads 1`, which is different from the built-in
default of 4. However, both values are equivalent because nscd forces
the number of threads to be at least as many as the number of kinds of
databases it supports, which is 5.
nscd doesn't create any files outside of /run/nscd unless the nscd.conf
"persistent" option is used, which we don't do by default. Therefore it
doesn't matter what UID/GID we run this service as, so long as it isn't
shared with any other running processes.
/run/nscd does need to be owned by the same UID that the service is
running as, but systemd takes care of that for us thanks to the
RuntimeDirectory directive.
If someone wants to turn on the "persistent" option, they need to
manually configure users.users.nscd and systemd.tmpfiles.rules so that
/var/db/nscd is owned by the same user that nscd runs as.
In an all-defaults boot.isContainer configuration of NixOS, this removes
the only user which did not have a pre-assigned UID.
Previously this module created both /var/db/nscd and /run/nscd using
shell commands in a preStart script. Note that both of these paths are
hard-coded in the nscd source. (Well, the latter is actually
/var/run/nscd but /var/run is a symlink to /run so it works out the
same.)
/var/db/nscd is only used if the nscd.conf "persistent" option is turned
on for one or more databases, which it is not in our default config
file. I'm not even sure persistent mode can work under systemd, since
`nscd --shutdown` is not synchronous so systemd will always
unceremoniously kill nscd without reliably giving it time to mark the
databases as unused. Nonetheless, if someone wants to use that option,
they can ensure the directory exists using systemd.tmpfiles.rules.
systemd can create /run/nscd for us with the RuntimeDirectory directive,
with the added benefit of causing systemd to delete the directory on
service stop or restart. The default value of RuntimeDirectoryMode is
755, the same as the mode which this module was using before.
I don't think the `rm -f /run/nscd/nscd.pid` was necessary after NixOS
switched to systemd and used its PIDFile directive, because systemd
deletes the specified file after the service stops, and because the file
can't persist across reboots since /run is a tmpfs. Even if the file
still exists when nscd starts, it's only a problem if the pid it
contains has been reused by another process, which is unlikely. Anyway,
this change makes that deletion even less necessary, because now systemd
deletes the entire /run/nscd directory when the service stops.
This postStart step was introduced on 2014-04-24 with the comment that
"Nscd forks into the background before it's ready to accept
connections."
However, that was fixed upstream almost two months earlier, on
2014-03-03, with the comment that "This, along with setting the nscd
service type to forking in its systemd configuration file, allows
systemd to be certain that the nscd service is ready and is accepting
connections."
The fix was released several months later in glibc 2.20, which was
merged in NixOS sometime before 15.09, so it certainly should be safe to
remove this workaround by now.
Add an option to set the rc-manager parameter in NetworkManager.conf,
which controls how NetworkManager handles resolv.conf. This sets the
default rc-manager to "resolvconf", which solves #61490. It
additionally allows the user to change rc-manager without interference
from configuration activations.
This commit adds new options to the Deluge service:
- Allow configuration of the user/group which runs the deluged daemon.
- Allow configuration of the user/group which runs the deluge web
daemon.
- Allow opening firewall for the deluge web daemon.
The override that builds the custom python for integrations-core was
overriding python, but pythonPackages was still being inherited from a
call to `datadog-integrations-core {}`, causing
service.datadog-agent.extraIntegrations to be ignored.
This commit adds new configuration options to the Lidarr module that
allows configuration of the user and group that Lidarr runs as; and to
open the firewall for the Lidarr port.
This was added in #19936 so that vulkan-loader finds the ICD config files. It is
not needed any more after #62869 where it was ensured that the loader looks in
/run/opengl-driver(-32)/share.
There are many support questions when people add a new binary cache
and they suddenly lose nixos substitutions.
Most of the users want to keep that, so we're doing a breaking change.
Previously to disable all binary caches one had to do:
nix.binaryCache = [];
Now the same is possible via:
nix.binaryCache = lib.mkForce;
Applies OpenWRT's noscan patch to hostapd and the relevant option to
the hostapd module.
This noscan patch adds a new `noscan` option allowing us to create
some overlapping BSSs in HT40+/- mode.
Note: this option is disabled by default, we leave this up to the end
user whether it should be enabled or not.
Not being able to create those overlapping BSSs is basically
preventing us to use 802.11n in any urban area where chances to
overlap with another SSID are extremely high.
The patch we are using is a courtesy of the openwrt team and is
applied to the defaul hostapd package in both OpenWRT and Archlinux.
Using "builtins.currentSystem" doesn't work in pure evaluation mode,
and even when it's explicitly set (which it always is, in
nixos/lib/eval-config.nix), it breaks manual generation because the
manual tries to render the default value.
The change to "NixOS Test Cluster" in #59179 broke startup of existing clusters
that used the previously-default cluster name "Test Cluster":
ERROR 23:00:47 Fatal exception during initialization
org.apache.cassandra.exceptions.ConfigurationException: Saved cluster name Test Cluster != configured name NixOS Test Cluster
Fixes#63388.
This will keep configuration configuring the size of the /boot partition
still build, while showing the deprecation warning.
In 99.9% of cases I assume ignoring the configuration is better, as the
sd-image builder already is pretty opinionated in that matter.
The slack, seemingly, accounted for more than the minimum required for
slack plus the two partitions.
This change makes the gap a somewhat abstracted amount, but is not
configurable within the derivation.
The current FAT32 partition is kept as it is required for the Raspberry
Pi family of hardware. It is where the firmware is kept.
The partition is kept bootable, and the boot files kept in there until
the following commits, to keep all commits of this series individually
bootable.
Up until now, the output has been the same for swap devices and swap
files:
{ device = "/var/swapfile"; }
Whereas for swap *files* it's easier to manage them declaratively in
configuration.nix:
{ device = "/var/swapfile"; size = 8192; }
(NixOS will create the swapfile, and later resize it, if the size
attribute is changed.)
With the assumption that swap files are specified in configuration.nix,
it's silly to output them to hardware-configuration.nix.
This will reduce the confusion at boot, where the only thing visible is
the last message from u-boot; where it looks like the board is
hung, while in reality it's likely resizing partitions.
This will reduce the confusion at boot, where the only thing visible is
the last message from u-boot; where it looks like the Raspberry Pi is
hung, while in reality it's likely resizing partitions.
Fixes the broken metrics evaluation which was caused by a `trace`
warning in stdout which confused `jq` in `pkgs/top-level/metrics.nix`.
Also made the `bind-device` feature optional as suggested after the
merge.
Manual build broken by 79f7f89442, which
is part of pull request #59179 (Fix Cassandra, improve config and
tests).
The issue was just a small error because of an unbalanced <literal/>
tag, so only a "/" was missing :-)
Signed-off-by: aszlig <aszlig@nix.build>
Cc: @aanderse
The the extraConfig variable is added below the domain variable in the
ddclient config file. The domain variable should always be last.
(cherry picked from commit ba0ba6dc79)
If the `seedAddresses` is not set, don't force `SimpleSeedProvider` to
be in `seed_provider`. This could cause problems in a multi-datacenter
deployment when a different seed provider is preferred.
Below that it works but only when supplying a custom password file with
restricted permissions (i.e. outside the nix-store). We can't do that
using an absolute path in the tests.
If you're on a multi user system you don't want to have the password in
the nix-store. With the new jmxRolesFile option you can specify your own
protected file instead.
Seems like you can't have a node as its own seed when it's listening on
an interface instead of an IP. At least the way it was done in the
test doesn't work and I can't figure out any other way than to just
listen on the IP address instead.
Add "bcache" to boot.initrd.availableKernelModules if a bcache device is
detected.
This fixes a problem I've had one too many times: I install NixOS and
forget to add "bcache", resulting in an unbootable machine (until fixed
with Live CD). Now NixOS will do it for me.
It is referenced in various places, but does not work out of the box:
$ nixos-help
/run/current-system/sw/bin/nixos-help: unable to start a web browser; please set $BROWSER
In the user-hidden fallbacks to xdg-open(1) and w3m(1), `nixos-help`
expects tools to be deliberately installed by users.
For default installations and new users in general, this is unlikely to
be the case. Conversely, chances to use `nixos-help` are even higher
in such cases.
Use w3m-nographics by default to ensure documentation is always
available. The documentation browser on ttyS8 already does so, but is
not accessible in every installation, e.g. VMs with only ttyS0 and SSH
available.
This obsoletes including it in the base profile's systemPackages,
so remove the @TODO as done.
Previously each oneshot peer service only ran once and was not
restarted together with the interface unit. Because of this,
defined peers were missing after restarting their corresponding
interface unit.
Co-Authored-By: Franz Pletz <fpletz@fnordicwalking.de>
This enhances #61423, which removed the gating of desktop-managers from
being linked to the xserver's state.
This, though, brought in xterm into all systems, even those without X
servers.
This change sets the *default* of the xterm desktop-manager to the state
of the xserver, keeping it enabled by default as a sane fallback.
The xterm desktop-manager can still be enabled or disabled as needed,
without it being affected by xserver's state.
This is needed for tcrypt and the benchmark subcommand. If enabled,
it is also used to unlock LUKS2 volumes and therefore the kernel modules
providing this feature need to be available in our initrd.
Fixes#42163. #54019.
This is a simple exporter which exports the information
provided by `wg show all dump` to prometheus.
Co-authored-by: Franz Pletz <fpletz@fnordicwalking.de>
This can lead to unnecessary failures if the kernel module is already
loaded:
Jun 06 12:38:50 chef bglisn9bz0y5403vdw9hny0ij43r41jk-unit-script-wireguard-wg0-start[13261]: modprobe: FATAL: Module wireguard not found in directory /run/booted-system/kernel-modules/lib/modules/4.19.36
Same as zfsUnstable for the moment.
We still keep the zfsUnstable expression as we likely
need it in the near future again.
Also remove spl since it is no longer needed.
See https://github.com/NixOS/nixpkgs/issues/15747. Previously this module was called `<unknown-file>`
in error messages, now it is called a bit more close to real:
```
module at /home/danbst/dev/nixpkgs/nixos/modules/virtualisation/containers.nix:470
```
Types are now specified for all options.
The fixed uid and gid for the avahi user have been removed
and the user avahi is now in the group avahi.
The the generic opening of the firewall for UDP port 5353 is
now optional, but still defaults to true.
The option `extraServiceFiles` was added to specify avahi
service definitions, which are then placed in `/etc/avahi/services`.
The geoclue module now lets us set application config. This should make
it more robust in desktop environments that don't define a geoclue
agent.
Fixes#45994.
The geoclue module now lets us set application config. This should make
it more robust in environments that don't provide a geoclue agent.
Fixes#44725.
We set stateVersion to `mkDefault 18.03` in
`nixos/modules/testing/test-instrumentation.nix` and in
`modules/installer/cd-dvd/installation-cd-base.nix`.
Accessing the stateVersion in the module system from within the tests
results in the following error:
> The unique option `system.stateVersion' is defined multiple times, in
> `nixpkgs/nixos/modules/installer/cd-dvd/installation-cd-base.nix' and
> `nixpkgs/nixos/modules/testing/test-instrumentation.nix'.
There are other tests that use it as well. Namely the radicale test also
verifies behaviour between state versions is as expected. It switches a
package default value. Others switched on the state directory default.
It seems like having the timesyncd switch as part of every rendered
activationScript might cause this weird error.
Removing this line seems like a reasonable thing to do since we actually
set the default to the very same value in the module system. This line
should have been no-op besides the issue that we've two statements
setting it in this very specific case.
The autoLuks module is not really compatible with the updated systemd
version anymore. We started dropping NixOS specific patches that caused
unwanted side effects that we had to work around otherwise.
This change points users towards the relevant PR and spits out a bit of
information on how to deal with the situation.
Somewhen between systemd v239 and v242 upstream decided to no longer run
a few system services with `DyanmicUser=1` but failed to provide a
migration path for all the state those services left behind.
For the case of systemd-timesync the state has to be moved from
/var/lib/private/systemd/timesync to /var/lib/systemd/timesync if
/var/lib/systemd/timesync is currently a symlink.
We only do this if the stateVersion is still below 19.09 to avoid
starting to have an ever growing activation script for (then) ancient
systemd migrations that are no longer required.
See https://github.com/systemd/systemd/issues/12131 for details about
the missing migration path and related discussion.
With systemd v242 using the `Gateway` attribute of the `[Network]`
section will lead to "onlink" routes on all the device that are matched
by the default configuration (typically all devices) causing multiple
default routes (even on localhost).
We can only avoid that - while keeping our default route option - when
we mark the route as explicitly not on link. Only gateways that are
within a subnet of one of the assigned interface addresses will be
installed into the routing table.
With the systemd update to v242 five lines are not longer sufficient to
verify that the storage was verified. In order to reduce future test
failures increasing it to 10 lines sounds like a sane amount.
The udev rules we are shipping no longer work with systemd v242 and were
remove upstream some time ago. It seems like the entire renaming is now
done in C and not in the udev rules.
Remove the btsync module. Bittorrent Sync was renamed to Resilio Sync in
2016, which is supported by the resilio module. Since Resilio Sync had
some security updates since 2016, it is not safe to run Bittorrent Sync
anymore.
Partially reapplies 35af6e3605
buildPackages need to be used only for image builders.
Otherwise, the bootloader builder may be setup using the wrong arch,
rendering it unusable
mysql already has its socket path hardcoded to to
/run/mysqld/mysqld.sock.
There's not much value in making the pidDir configurable, which also
points to /run/mysqld by default.
We only seem to use `services.mysql.pidDir` in the wordpress startup
script, to wait for mysql to boot up, but we can also simply wait on the
(hardcoded) socket location too.
A much nicer way to accomplish that would be to properly describe a
dependency on mysqld.service. This however is not easily doable, due to
how the apache-httpd module was designed.
As we don't need to setup data directories from ExecStartPre= scripts
anymore, which required root, but use systemd.tmpfiles.rules instead,
everything can be run as just the mysql user.
define commands like "waiting for the mysql socket to appear" or "setup
initial databases" in a let expression, so the main control flow becomes
more readable.
We need to keep using `RuntimeDirectory=mysqld`, which translates to
`/run/mysqld`, as this is used for the location of the file socket, that
could differ with what is configured via `cfg.pidDir`.
Before, changing any peers caused the entire WireGuard interface to
be torn down and rebuilt. By configuring each peer in a separate
service we're able to only restart the affected peers.
Adding each peer individually also means individual peer
configurations can fail, but the overall interface and all other peers
will still be added.
A WireGuard peer's internal identifier is its public key. This means
it is the only reliable identifier to use for the systemd service.
5404595b55 relocated code but kept
one backslah too many, leading to
$ tmux
error creating /run/user/$(id -u)/tmux-1000 (No such file or directory)
/run/user/$UID/ is created by pam_systemd(3) which also populates
XD_RUNTIME_DIR with that value.
Alternatively, TMUX_TMPDIR might simply default to XDG_RUNTIME_DIR
without providing the same directory yet again as default string in
parameter substitution, however such behaviour change is subject to
another patch.
In fact, with `security.polkit.enable = false` systemd_logind(8) fails
to start and /run/user/$UID/ is never created for unprivileged users
in proper login sessions; XDG_RUNTIME_DIR would consequently not be
set either.
Removing the fallback to /run/user/$UID/ would have caused TMUX_TMPDIR
to be empty, which in turn would lead tmux(1) to use /tmp/. This
effectively breaks the idea of isolated sockets entirely while hiding
errors from the user.
When calling reload, bird attempts to reload the file that was given in
the command line. As the change of ${configFile} is never picked up,
bird will just reload the old file.
This way, the configuration is placed at a known location and updated.
The clickshare-csc1 package brings a udev rule file
to grant access to the ClickShare dongle if connected.
This module provides an option to install that rule file.
Only users in the "clickshare" users group have access.
We differentiate between modules and baseModules in the
VM builder for NixOS tests. This way, nesting.children, eventhough
it doesn't inherit from parent, still has enough config to
actually complete the test. Otherwise, the qemu modules
would not be loaded, for example, and a nesting.children
statement would not evaluate.
* compton-git: 5.1-rc2 -> 6.2
vsync is now a boolean option, see:
https://github.com/yshui/compton/pull/130
menu-opacity is deprecated and there's a warning that says:
Please use the wintype option `opacity` of `popup_menu` and
`dropdown_menu` instead.
* nixos/compton: Keep vSync option backwards compatible
The new upstream option tries to make the best choice for the user.
Therefore the behaviour should stay the same with this backwards
compatibility patch.
* compton-git: Remove DRM option
It's deprecated and shouldn't be used.
https://github.com/yshui/compton/pull/130/files#r285505456
* compton-git: Remove new_backends option
Was removed in "Let old/new backends co-exist"
b0c5db9f5aa500dc3568cc6fe68493df98794d4d
* compton: 0.1_beta2.5 -> 6.2
Drop the legacy, unmaintained version and use the fork for real.
Fix#61859.
Assertion fails when a Google Compute Engine image is built, because
now choices of filesystem types are restricted to `f2fs` and `ext` family if
auto-resizing is enabled.
This change will pin the filesystem used on such an image to be `ext4` for now.
