This module was written by @puckipedia for nixcon-video-infra 2020.
Minor changes made by @cleeyv for compat with existing jibri package.
Co-authored-by: Puck Meerburg <puck@puck.moe>
This option enables a jibri service on the same host that is running
jitsi-meet. It was written, along with the jibri module, by @puckipedia
for nixcon-video-infra 2020.
Co-authored-by: Puck Meerburg <puck@puck.moe>
during the rewrite the checkPasswords=false feature of the old module
was lost. restore it, and with it systems that allow any client to use
any username.
mosquitto needs a lot of attention concerning its config because it doesn't
parse it very well, often ignoring trailing parts of lines, duplicated config
keys, or just looking back way further in the file to associated config keys
with previously defined items than might be expected.
this replaces the mosquitto module completely. we now have a hierarchical config
that flattens out to the mosquitto format (hopefully) without introducing spooky
action at a distance.
unifi does not shut down properly when stopped via systemd (it always exits with
SIGTERM exit status) because systemd wants stop commands to not exit before the
main command is gone and unifi does not comply. the easiest way around this is
to have systemd send an ignored signal after the stop command has exited.
unifi may still throw exceptions during shutdown, but it *does* exit cleanly as
far as systemd is concerned now.
In case of a power loss shortly after first boot,
the host keys gernerated by ssh-keygen could exist
in the file system but have zero size, preventing
sshd from starting up.
This commit changes the behaviour to generate host
keys if the file either does not exist or has zero
size, fixing the problem on the next boot.
Thanks to @SuperSandro2000 for figuring this out.
The multipath-tools package had existed in Nixpkgs for some time but
without a nixos module to configure/drive it. This module provides
attributes to drive the majority of multipath configuration options
and is being successfully used in stage-1 and stage-2 boot to mount
/nix from a multipath-serviced iSCSI volume.
Credit goes to @grahamc for early contributions to the module and
authoring the NixOS module test.
The service can run unprivileged -- by using capabilities -- and the
uid/gid can be dynamically allocated since there are only a handful of
state files.
This change improves the overall security of the service by leveraging
systemd's hardening and getting rids of `nogroup` and the initial root
permissions (before the daemon drop privileges).
After recent change `services.smokeping.enable = true;` system
started failing the build as:
```
nixpkgs-master $ nix build --no-link -f nixos system --keep-going
...
Checking that Nix store paths of all wrapped programs exist... FAIL
The path /nix/store/kr2sr80g9ny74im6m6dyh9v44hnzm261-fping-5.0/bin/fping6 does not exist!
Please, check the value of `security.wrappers."fping6".source`.
```
`fping` does not provide `fping6` binary for a while. Let's just remove it.
Closes: https://github.com/NixOS/nixpkgs/issues/138581
- Detailed initial config generation process.
- Detailed Nginx Configuration.
- Detailed private/public conf split.
docs: Improved documentation of Pleroma service
Secrets are only in the private file, and in a draft format for avoiding GitHub
complaints.
Fixed Nginx configuration.
docs: Improved the Nginx reverse proxy settings of Pleroma service
I noticed this minor grammar mistake when running update.nix, and then
while grepping to find the source I noticed we had it a few times in
Nixpkgs. Just as easy to fix treewide as it was to fix the one
occurrence I noticed.
Dash `echo` interprets backslash escapes. This causes two consecutive backslashes in JSON to turn into a single one before the string is passed to jq, resulting in a parsing error.
This is useful for situations in which you might want to reset certain
things using `--reset-database` or `--reset-deltas` or debug certain
things using any of the debug options like `--debug-perf-stats`.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
This sets up a different systemd service for each interface. This way
each wpa_supplicant instance waits for his inteface to become ready
using the respective device unit, and that only. The configuration file
is still shared between all instances, though.
This closes a longstanding "fixme" from cbfba81.
- Add an option to automatically launch a scan when the
signal of the current network is low
- Enable 802.11r (fast access point transition) by default for all
protected networks
I may have finally found a clean solution to the issues[1][2][3] with
the automatic discovery of wireless network interfaces.
[1]: https://github.com/NixOS/nixpkgs/issues/101963
[2]: https://github.com/NixOS/nixpkgs/issues/23196
[3]: https://github.com/NixOS/nixpkgs/pull/125917#issuecomment-856000426
Currently the start script fails right away if no interface is available
by the time it's running, possibly leaving the system without network.
This happens when running a little early in the boot. A solution is to
instead wait for at least one interface to appear before scanning the
/sys/class/net/ directory. This is done here by listening for the right
udev events (from the net/wlan subsystem) using the `udevadm monitor`
command and grep to match its output.
This methods guarantees the availability of at least one interface to
wpa_supplicant, but won't add additional interfaces once it has started.
However, if the current interface is lost, say unplugged, the service is
automatically stopped and will be restarted as soon as a one (not
necessarily the same) is detected. It would be possible make this fully
dynamic by running another service that continously listen for udev
events and manages the main wpa_supplicant daemon, but this is probably
overkill.
I tested the following cases:
- one interface, starting at boot, w/o predictable naming scheme
- two interfaces, starting at boot (intel wireless and a usb adapter),
w/o predictable naming scheme
- one interface after the system booted, w/o predictable naming scheme
- two interfaces after the system booted, w/o predictable naming scheme
- unplugging and plugging back the current interface
The pppd daemon starting with version 2.4.9 uses rtnetlink to configure
the ipv6 peer address on the ppp interface. It therefore requires
allowing AF_NETLINK sockets.
The kernel before version 5.7 required CAP_SYS_ADMIN to conduct BPF
operations. After that a separate capability CAP_BPF was created, which
should be sufficient in this scenario and will further tighten the
sandbox around our pppd service.
Tested on my personal DSL line.
- The order of NSS (host) modules has been brought in line with upstream
recommendations:
- The `myhostname` module is placed before the `resolve` (optional) and `dns`
entries, but after `file` (to allow overriding via `/etc/hosts` /
`networking.extraHosts`, and prevent ISPs with catchall-DNS resolvers from
hijacking `.localhost` domains)
- The `mymachines` module, which provides hostname resolution for local
containers (registered with `systemd-machined`) is placed to the front, to
make sure its mappings are preferred over other resolvers.
- If systemd-networkd is enabled, the `resolve` module is placed before
`files` and `myhostname`, as it provides the same logic internally, with
caching.
- The `mdns(_minimal)` module has been updated to the new priorities.
If you use your own NSS host modules, make sure to update your priorities
according to these rules:
- NSS modules which should be queried before `resolved` DNS resolution should
use mkBefore.
- NSS modules which should be queried after `resolved`, `files` and
`myhostname`, but before `dns` should use the default priority
- NSS modules which should come after `dns` should use mkAfter.
This allows users of the bind module to specify an alternate BIND
package. For example, by overriding the source attribute to use a
different version of BIND.
Since the default value for `services.bind.package` is `pkgs.bind`,
this change is completely backwards compatible with the current
module.
