Cargo sets `CARGO_FEATURE_*` for all features when running a build
script:
https://doc.rust-lang.org/cargo/reference/environment-variables.html#environment-variables-cargo-sets-for-build-scripts
Some crates have build scripts (e.g. openblas-src) that rely on the
feature variables being properly set.
Since we now need several representations of features, this change
also updates `createFeatures` to be a list of features, rather than
`rustc` feature arguments. `configureCrate` and `buildCrate` then
build the required representations as-needed.
Fixes#68978
When building an environment if two paths conflict but one or both are
symbolic links and they resolve to the same real path, the conflict is
discarded because the contents of both paths are the same. One of them
is chosen and there is no need to recur into them in order to build
deeper symbolic links.
We can use cacert to validate that the data passes SSL certificates.
Normally, this doesn’t happen because we already have the hash, but in
the hash = "" case we don’t.
xchg is advertised as a bidirectional exchange dir, but file content
transfer from host to VM fails due to caching:
If a file is read in the VM and then modified on the host, subsequent
re-reads in the VM can yield old, cached data.
This is caused by the use of 9p's cache=loose mode that is explicitly
meant for read-only mounts.
9p doesn't provide any suitable cache modes, so fix this by disabling
caching.
Also, remove a now unnecessary sync in the test driver.
This adds the `validatePkgConfig` hook, which can be used to validate
pkg-config files in the output(s). Currently, this will just run
`pkg-config --validate` on all `.pc` files, capturing errors such as
the issue that was fixed in #87789.
The hook could be extended in the future with more fine-grained
checks.
In https://github.com/NixOS/nixpkgs/pull/58431 the authors ensured that
the resulting layer.tar would always list
/nix/
/nix/store/
first to fully comply to the tar spec. Various refactorings later it is only
ensured to create /nix/ but NOT /nix/store anymore. Instead tar transformed
them to /nix/nix and /nix/nix/store.
This is much better because then we can freely keep the comments up to
date without causing mass rebuilds.
Someday, somebody should make the same change with `cc-wrapper` and
`bintools-wrapper`.
There are several tarballs (such as the `rust-lang/rust`-source) with a
`Cargo.toml` at root and several sub-packages (with their own Cargo.toml)
without using workspaces[1].
In such a case it's needed to move into a subdir to only build the
specified sub-package (e.g. `rustfmt` or `rsl`), however the artifacts
are at `/target` in the root-dir of the build environment. This breaks
the build since `buildRustPackage` searches for executables in `target`
(which is at the build-env's root) at the end of the `buildPhase`.
With the optional `buildAndTestSubdir`-argument, the builder moves into
the specified subdir using `pushd`/`popd` during `buildPhase` and
`checkPhase`.
Also moved the logic to find executables and libs to the end of the `buildPhase`
from a custom `postBuild`-hook to fix packages with custom `build`/`install`-procedures
such as `uutils-coreutils`.
[1] https://doc.rust-lang.org/book/ch14-03-cargo-workspaces.html
I hate the thing too even though I made it, and rather just get rid of
it. But we can't do that yet. In the meantime, this brings us more
inline with autoconf and will make it slightly easier for me to write a
pkg-config wrapper, which we need.
Some PECLs depend on other PECLs and, like internal PHP extension
dependencies, need to be loaded in the correct order. This makes this
possible by adding the argument "peclDeps" to buildPecl, which adds
the extension to buildInputs and is treated the same way as
internalDeps when the extension config is generated.
flat hashes can be substituted through hashed-mirrors, while recursive
hashes can’t. This is especially important for Bazel since the bazel
fetch dependencies can come from multiple different methods (git,
http, ftp, etc.). To do this, we create tar archives from the
output/external directory, which is then extracted to build. All of
the Bazel hashes are all updated.
If a user provides `nativeBuildInputs = [ llvmPackages.bintools ]` or any other
package containing a `${prefix}/bin/diff`, the builder could use it instead
of the standard unix `diff`, causing a build failure.
This updates the call to specify an abspath to `diff` and avoid reliance on `PATH`.
Resolves#87081
Calculating the tarsum after creating a layer is inefficient, since
we have to read the tarball we've just written from the disk.
This commit simultaneously calculates the tarsum while creating the
tarball.
Appending to an existing tar archive repeatedly seems to be a quadratic
operation, since tar seems to traverse the existing archive even using
the `-r, --append` flag. This commit avoids that by passing the list of
files to a single tar invocation.
When running `cargo test --release`, the artifacts from `buildPhase`
will be reused here. Previously, most of the stuff had to be recompiled
without optimizations.
The only reason to pass build inputs is to extend the unpackPhase with
custom unpack commands. Eg: add "unrar" to unpack rar sources. And those
should really be passed as native build inputs. Why? Because
nativeBuildInputs is for dependencies that are used at build time but
will not propagate as runtime dependencies. And also, cross-compilation.
The build system already sets these properly to the absolute path so no
need to patch the libraries on darwin.
$ otool -D result/lib/liblapacke.dylib
result/lib/liblapacke.dylib:
/nix/store/k88gy5s765yn3dc5ws3jbykyvklm7z96-openblas-0.3.8/lib/libopenblasp-r0.3.8.dylib
Fixes#85713
Previously, callPackage would try and fill the arguments such as `name`
and `src` which would cause problems if those existed as top-level
attributes. This also makes it clearer what part is the function
signature.
Then document the derivation inline in the code to explain the ellipsis
and various use-cases.
This reverts commit b32a057425,
which breaks even the most straightforward uses of srcOnly:
nix-repl> srcOnly guile
error: anonymous function at /home/src/nixpkgs/pkgs/build-support/src-only/default.nix:1:1 called with unexpected argument 'drvPath', at /home/src/nixpkgs/lib/customisation.nix:69:16
nix-repl> srcOnly hello
error: anonymous function at /home/src/nixpkgs/pkgs/build-support/src-only/default.nix:1:1 called with unexpected argument 'drvPath', at /home/src/nixpkgs/lib/customisation.nix:69:16
Link: https://github.com/NixOS/nixpkgs/pull/80903#issuecomment-617172927
This is a better name since we have multiple 64-bit things that could
be referred to.
LP64 : integer=32, long=64, pointer=64
ILP64 : integer=64, long=64, pointer=64
This is based on previous work for switching between BLAS and LAPACK
implementation in Debian[1] and Gentoo[2]. The goal is to have one way
to depend on the BLAS/LAPACK libraries that all packages must use. The
attrs “blas” and “lapack” are used to represent a wrapped BLAS/LAPACK
provider. Derivations that don’t care how BLAS and LAPACK are
implemented can just use blas and lapack directly. If you do care what
you get (perhaps for some CPP), you should verify that blas and lapack
match what you expect with an assertion.
The “blas” package collides with the old “blas” reference
implementation. This has been renamed to “blas-reference”. In
addition, “lapack-reference” is also included, corresponding to
“liblapack” from Netlib.org.
Currently, there are 3 providers of the BLAS and LAPACK interfaces:
- lapack-reference: the BLAS/LAPACK implementation maintained by netlib.org
- OpenBLAS: an optimized version of BLAS and LAPACK
- MKL: Intel’s unfree but highly optimized BLAS/LAPACK implementation
By default, the above implementations all use the “LP64” BLAS and
LAPACK ABI. This corresponds to “openblasCompat” and is the safest way
to use BLAS/LAPACK. You may received some benefits from “ILP64” or
8-byte integer BLAS at the expense of breaking compatibility with some
packages.
This can be switched at build time with an override like:
import <nixpkgs> {
config.allowUnfree = true;
overlays = [(self: super: {
lapack = super.lapack.override {
lapackProvider = super.lapack-reference;
};
blas = super.blas.override {
blasProvider = super.lapack-reference;
};
})];
}
or, switched at runtime via LD_LIBRARY_PATH like:
$ LD_LIBRARY_PATH=$(nix-build -E '(with import <nixpkgs> {}).lapack.override { lapackProvider = pkgs.mkl; is64bit = true; })')/lib:$(nix-build -E '(with import <nixpkgs> {}).blas.override { blasProvider = pkgs.mkl; is64bit = true; })')/lib ./your-blas-linked-binary
By default, we use OpenBLAS LP64 also known in Nixpkgs as
openblasCompat.
[1]: https://wiki.debian.org/DebianScience/LinearAlgebraLibraries
[2]: https://wiki.gentoo.org/wiki/Blas-lapack-switch
hashed-mirrors are content addressed. So if $outputHash is in the
hashed-mirror, changes from ‘postFetch’ would already be made. So,
running postFetch will end up applying the change /again/, which we
don’t want.
I know, heretic, but...
I also know that this is not perfect but it is a good start, I think. It
would be nice if this were part of the automatic "nixdoc" function
reference. I'd like guidance if this should be part of the rust section
or something else.
"Application" is deprecated, "Other" is invalid, there are no generic
categories, and the Categories fields is optional per the spec.
Fixes the defaults after #75729.
Most of the skaware packages already build just fine with pkgsStatic,
however the wrapper scripts for execline and stdnotify-wrapper needed
the `-lskarlib` argument to go at the end.
`utmps` and `nsss` still fail with this error:
```
exec ./tools/install.sh -D -m 600 utmps-utmpd /bin/utmps-utmpd
/build/utmps-0.0.3.1/tools/install.sh: line 48: can't create /bin/utmps-utmpd.tmp.479: Permission denied
make: *** [Makefile:121: /bin/utmps-utmpd] Error 1
```
This reverts commit a50653295d.
The reasons cited were “debugging”, in which case
you can just add the attribute to `buildSkawarePackage`
and “customizing”, which is still possible with
a normal `overrideDerivation`.
The patch removed `outputs` for some reason
(possible oversight), so building nsss failed.
Plus lots of complexity (e.g. don’t forget to add new
arguments to `removeAttrs` otherwise there’s a bug now).
As it turns out Darwin does most of the things differently then "normal"
systems. They are using a different shared library extension and require
an obscure commandline parameter that has to be added to every build
system out there. That issue seems to be with clang on Darwin as on
Linux that flag isn't required to build the very same tests (when using
clang).
After adjusting these two details the tests are running fine on the
darwin box that I was able to obtain.
- Add packages installed in a sub-directory of site-lisp, such as
mu4e, to EMACSLOADPATH.
- Add ELPA packages to EMACSLOADPATH.
- Add each package only once to EMACSLOADPATH. Before, each package
would typically be added twice for each transitive dependency
leading to a huge variable for a package having many dependencies.
Fixed#78680
According to the Cargo documentation:
> The build script does not have access to the dependencies listed in
> the dependencies or dev-dependencies section (they’re not built
> yet!). Also, build dependencies are not available to the package
> itself unless also explicitly added in the [dependencies] table.
https://doc.rust-lang.org/cargo/reference/build-scripts.html
This change separates linkage of regular dependencies and build
dependencies.
Regression introduced in PR #8119180729b6787. The file does not exist
somewhere during bootstrap of pkgsStatic.busybox which is used in nix
(by default).
I tested the builds.
* Make errors include the crate name and make them much more prominent.
* Move more code into lib.sh
* Already source generated logging code and lib.sh in configure
The inlined readme that we were iterating on has been moved to GitHub
issue #79975, and the default is now the new cargo fetcher, so this
doc comment is out of date.
All bazel fixed output derivations should be specific to the bazel
version that was used to generate them. There is not guarantee that the
build will still succeed or reproduces (without the cached fixed output)
if the fetch phase wasn't rerun with a different bazel version.
In the past bazel had been bumped but not all those packages that have
fixed outputs from bazel builds. This lead to compiling and somewhat
working TF versions that couldn't be reproduced without the cached fixed
outputs.
Nix now returns base64-encoded SRI hashes on hash mismatch. Usually,
people copy the returned hashes in TOFU fashion but since base64-encoded
strings can contain slashes, they often broke our use of them for temporary file name.
Escaping them should prevent the failures.
Previously, we would asssert that the lockfiles are consistent during the
unpackPhase, but if the pkg has a patch for the lockfile itself then we must
wait until the patchPhase is complete to check.
This also removes an implicity dependency on the src attribute coming from
`fetchzip` / `fetchFromGitHub`, which happens to name the source directory
"source". Now we glob for it, so different fetchers will work consistently.
This is useful when buildLayeredImage is called in a generic way
that should allow simple (base) images to be built, which may not
reference any store paths.
If we just want to write a non-compiled script (e.g. writeDash), it’s
usually a lot faster just doing it locally. That’s what
`runCommandLocal` was introduced for, so let’s use it in `writers`.
When the `paths` argument is too big `symlinkJoin` will fail with:
```
while setting up the build environment: executing '/nix/store/rm1hz1lybxangc8sdl7xvzs5dcvigvf7-bash-4.4-p23/bin/bash': Argument list too long
```
This is fixed by passing `paths` as a file instead of as an
environment variable.
`git repack` and `git gc` sometimes print “Nothing new to pack.”
to stdout, which breaks redirecting output to JSON file.
Let’s move the stdout of all git calls where it is not used to stderr
so that we still receive the info but it does not pollute our output.
Fixes#78744
My previous change broke when there are more packages than the maximum
number of layers. I had assumed that the `store-path-to-layer.sh` was
only ever passed a single store path, but that is not the case if
there are multiple packages going into the final layer. To fix this, we
loop through the paths going into the final layer, appending them to the
tar file and making sure they end up at the right path.
Changes the default fetcher in the Rust Platform to be the newer
`fetchCargoTarball`, and changes every application using the current default to
instead opt out.
This commit does not change any hashes or cause any rebuilds. Once integrated,
we will start deleting the opt-outs and recomputing hashes.
See #79975 for details.
The readme was nice to discuss in the implementation PR, but now that this is
merged it's better to have an issue that can be linked against in PRs and
doesn't require further merges to update status.
Ported with a status update in #79975
By overriding each dependency on every level of the dependency tree we
are creating a lot of unnecessary instances of the same derivation
Looking at the output size of `nix-instantiate --trace-function-calls
-vvvv …` and the execution time I got about a 10x improvement after
applying this change.
It was probably good intentions that lead to these overrides but in
practice no tooling (that I know of) really needs this. `carnix` and
`crate2nix` are fine without those overrides. Furthermore I believe that
it is the job of the tooling around `buildRustCrate` to provide a
coherent set of overrides. By not enforcing all of the overrides, debug
flags, verbosity, … to be the same throughout the closure we also allow
consumers to override specific aspects of the crates. Some (older?)
crates might need different `crateOverrides` then newer crates with the
same name. Currently such situations can not (easily) be implemented
with the override in-place.
This has several advantages:
1. It takes up less space on disk in-between builds in the nix store.
2. It uses less space in the binary cache for vendor derivation packages.
3. It uses less network traffic downloading from the binary cache.
4. It plays nicely with hashed mirrors like tarballs.nixos.org, which only
substitute --flat hashes on single files (not recursive directory hashes).
5. It's consistent with how simple `fetchurl` src derivations work.
6. It provides a stronger abstraction between input src-package and output
package, e.g., it's harder to accidentally depend on the src derivation at
runtime by referencing something like `${src}/etc/index.html`. Likewise, in
the store it's harder to get confused with something that is just there as a
build-time dependency vs. a runtime dependency, since the build-time
src dependencies are tarred up.
Disadvantages are:
1. It takes slightly longer to untar at the start of a build.
As currently implemented, this attaches the compacted vendor.tar.gz feature as a
rider on `verifyCargoDeps`, since both of them are relatively newly implemented
behavior that change the `cargoSha256`.
If this PR is accepted, I will push forward the remaining rust packages with a
series of treewide PRs to update the `cargoSha256`s.
Since a layer is reserved for "customization", the image can not
contains less than 2 layers.
The user gets the following message at evaluation:
nix-instantiate nixos/tests/docker-tools.nix
trace: the maxLayers argument of dockerTools.buildLayeredImage function must be greather than 1 (current value: 1)
Building a docker image with darwin binaries just yields a confusing
error when ran:
standard_init_linux.go:211: exec user process caused "exec format error"
This change prevents people from building such images in the first place
Previously I did use `runCommand` to do the same. Using
releaseTools.aggregate seems a lot saner and we might get nicer hydra
output of the tests that are failing.
It used to be the case (ref missing) that cargo did treat
`src/$libName.rs` as an alternative to `src/lib.rs` when the latter
wasn't present. Recently I failed to reproduce that with vanilla cargo
and it started to cause pain with some crates of the form:
some_crate/
`- src
`- main.rs
`- some_crate.rs
We would build `src/some_crate.rs` and thing it is a library while that
might not be the actual case. This crate is a valid `bin` crate not a
`lib` crate as far as I can tell from the samples I took.
I removed support for the previously required heuristic and commented
out the test cases in case we will need them again. We could crawl in
the Git history but chances are that the next person looking into this
doesn't know about the history.
Naive concatenation of $LD_LIBRARY_PATH can result in an empty
colon-delimited segment; this tells glibc to load libraries from the
current directory, which is definitely wrong, and may be a security
vulnerability if the current directory is untrusted. (See #67234, for
example.) Fix this throughout the tree.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
While looking at the graph of all the outputs in my personal binary
cache it became obvious that we have a lot of self references within the
package set. That isn't an isuse by itself. However it increases the
size of the binary cache for every (reproducible) build of a package
that carries references to itself. You can no longer deduplicate the
outputs since they are all unique. One of the ways to get rid of (a few)
references is to rewrite all the symlinks that are currently used to be
relative symlinks. Two build of something that didn't really change but
carries a self-reference can the be store as the same NAR file again.
I quickly hacked together this change to see if that would yield and
success. My bash scripting skills are probably not great but so far it
seem to somewhat work.
When this fails, the user may want to copy-paste the path to the "bad"
Cargo.lock file to inspect. The trailing `.` on `$cargoDeps.` gets caught in
most terminal copy-pastes. Since half the lines already don't have it, this
removes it from all of them for consistent output.
This helps us instruct rustc to build tests instead of binaries. The
actual build will then ONLY produce test executables. This is a first
step towards having rust crate tests within nixpkgs.
We default back to only a single output in test cases since that is the
only reasonable thing to do here.
Producing libraries or binaries in addition to tests would theoretically
be feasible but usually generates different dependency trees. It is very
common to have some libraries in `[dev-depdendencies]` within Cargo.toml
just for your tests. To not start mixing things up going with a
dedicated derivation for the test build sounds like the best choice for
now.
To use this you must provide a proper test dependency chain to
`buildRustCrate` (as you would usually do with your non-test inputs).
And then set the `buildTests` attribute to `true`. The derivation will
then contain all tests that were built in `$out/tests`. All common test
patterns and directories should be supported and tested by this change.
Below is an example how you would run a single test from the derivation.
This commit contains some more examples in the `buildRustCrateTests`
attribute set that might be helpful.
```
let
drv = buildRustCrate {
…
buildTests true;
};
in runCommand "test-my-crate" {} ''
touch $out
exec ${drv}/tests/my-test
''
```
While unifying most of the lib function calls I accidentially changed
the filterSource functions as well. Since there were no tests I ended
up forgetting about this case (even thought I ran into it…).
when tar'ing store paths into layered archives when building layered
images, don't use the absolute nix store path so that tar won't complain
if something new is added to the nix store
when building the final docker image, ignore any file changes tar
detects in the layers. they are all immutable and the only thing that
might change is the number of hard links due to store optimization
Most stdenv wrappers already work like this -- it allows greater
customisation. We just have to be careful to remove arguments we're
using that shouldn't be passed to stdenv. I've been conservative
here, because fetchcargo checksums shouldn't change lightly.
Before, every docker image had three extra layers:
1. A `closure` layer which is an internal implementation detail of
calculating the closure of the container
2. a `name-config.json` layer which is the images' run-time
configuration, and has no business being *in* the image as a layer.
3. a "bulk-layers" layer which is again and implementation detail
around collecting the image's closure.
None of these layers need to be in the final product.
This allows things like hooks other than postInstall to be passed
through to mkDerivation, which is very useful when customising or
debugging a package.
This reduces the size of Hello World [1] from 3.06 MiB to 678 KiB.
[1] As measured by nix-shell -p 'writers.writeHaskellBin "hello" {} "main = putStrLn \"hello\""' --run 'ls -l `which hello`'
The previous lines were only different in the kind of dependencies but
otherwise exactly the same. It makes the entire thing a bit more
readable by moving this into a function that takes care of this.
We can get rid of a bunch of workarounds that were in the build script
before by just passing on the `crateBin` attribute.
Before we converted the list of attributes to a string only to convert
it back in bash during the build phase. We can do the entire looping
through builds in Nix and thus need no conversion and parsing of
attributes over and over again.
The big part that still remains bash is the heuristic that cargo
introduced and that we can't do at eval time.
That code had been in the derivation for a while but no explanation was
given why that is needed. It might be helpful to our future selfs to
document why things are done the way they are.
The expression is already long and confusing enough without the color
stuff sprinkled in. Moving it to a dedicated file makes sense.
I switched a bit of the color support code to pure Nix since there
wasn't much point in doing that in bash while we can just do it in Nix.
We can just use `lib` instead of `builtins` in all cases but the
`hashString` case. Also changed a few lines to make use of some optional
helpers from lib.
Adding empty variables can lead to this problem:
```diff
wrapProgram \
./pye_menu_shell \
--prefix PATH : /nix/store/4c3z5r6yxsf2cxwwyazhdn92xixn4j5b-python3-3.7.5/bin:/nix/store/b3l3niilvqcxcsbxmd6sgqk1dy1rk81c-pye-menu-1.0/bin:/nix/store/y8j1cfj8d9r5rbbxc22w7hnfjw5f4fd3-cairo-1.16.0-dev/bin:/nix/store/6mg7lfbdh9pgx7pbxr3544qqbrigdl1q-freetype-2.10.1-dev/bin:/nix/store/gpszqcy0xi0lavbbjdq82zkkjp3jbp2a-bzip2-1.0.6.0.1-bin/bin:/nix/store/031c5pk5lzabgmpqpyd46hzi625as6bp-libpng-apng-1.6.37-dev/bin:/nix/store/f8kl7kmpv130aw9zm542p74a3hg0yc13-fontconfig-2.12.6-bin/bin:/nix/store/bqp30vkncmm222mjvwggz0s7p318sflj-expat-2.2.7-dev/bin:/nix/store/w57xa8g4s4aviwmqwgra7m5hwj2b005m-glib-2.60.7-dev/bin:/nix/store/v5d4966ahvfir2hwpv003022f3pb7vik-gettext-0.19.8.1/bin:/nix/store/qpvxhl1jr0fxnrx9idnpdagqs00m5m2z-glib-2.60.7/bin \
--set PYTHONNOUSERSITE true \
--set GDK_PIXBUF_MODULE_FILE /nix/store/7ddlakx6xjczqbfs80xjd14f30fzadws-gdk-pixbuf-2.38.1/lib/gdk-pixbuf-2.0/2.10.0/loaders.cache \
--prefix XDG_DATA_DIRS : /nix/store/0snjc1qg89zqn3v35l9d55xrykh9nj5c-gtk+3-3.24.10/share/gsettings-schemas/gtk+3-3.24.10:/nix/store/b41z51vdv11n6df8ki5vj8dynxw98f9l-gsettings-desktop-schemas-3.32.0/share/gsettings-schemas/gsettings-desktop-schemas-3.32.0:/nix/store/0snjc1qg89zqn3v35l9d55xrykh9nj5c-gtk+3-3.24.10/share/gsettings-schemas/gtk+3-3.24.10 \
- --prefix GST_PLUGIN_SYSTEM_PATH_1_0 : \
+ --prefix GST_PLUGIN_SYSTEM_PATH_1_0 : "" \
--prefix GI_TYPELIB_PATH : /nix/store/0snjc1qg89zqn3v35l9d55xrykh9nj5c-gtk+3-3.24.10/lib/girepository-1.0:/nix/store/z29l5xaaxh1s0697mcldj71ab0zshry1-librsvg-2.44.15/lib/girepository-1.0:/nix/store/pija1xzm7izxfb5m2hvhvlwp1l38ffxa-gobject-introspection-1.60.2/lib/girepository-1.0 \
- --prefix GRL_PLUGIN_PATH :
+ --prefix GRL_PLUGIN_PATH : ""
```
Where the diff is to highlight the problem: we don't have a valid value
for GST_PLUGIN_SYSTEM_PATH_1_0 or GRL_PLUGIN_PATH, and instead of
passing the empy string, the empty string gets unquoted somewhere, so we
end up passing no arguments, thus the parser in wrapProgram takes
--prefix as the argument of GST_PLUGIN_SYSTEM_PATH_1_0, and then
GI_TYPELIB_PATH is missing it's --prefix so wrapProgram complains/dies.
The easiest change is to not add empty arguments to the wrapper
When updating to cpio-2.13 in fe758f5fa3,
a patch from SUSE was dropped. This patch was intended to resolve
CVE-2015-1197, and introduced the '--extract-over-symlink' option to
disable its own effects.
The CVE-2015-1197 was fixed in cpio-2.13 release[1] by other means,
making this patch useless.
Given that this patch is no longer used, we do not need to disable its
effects anymore with the `--extract-over-symlink` argument switch.
This Commit fixes#74984
[1] https://lists.gnu.org/archive/html/info-gnu/2019-11/msg00002.html
depmod looks for files modules.order and modules.builtin which are
generated at kernel build time but were previously not passed to
the modules-shrunk derivation
dockerTools.buildImageWithNixDb: export USER
Changes to Nix user detection (./src/nix-channel/nix-channel.cc#L-166)
cause this function to error. Exporting USER fixes this.
I haven't been doing any maintenance for a long time now and not only
do I get notified, it also creates a fake impression that all these
packages had at least one maintainer when in practice they had none.
We shouldn’t force the user to have a C compiler in scope, just
because the derivation is forced to build locally. That can’t be
counted as “lightweight” anymore.
Co-Authored-By: Silvan Mosberger<contact@infinisil.com>
A definition I’ve been copy-pasting everywhere so far, so it’s finally
time to add it to nixpkgs.
I’m using a remote builder for my regular nix builds, so trivial
`runCommand`s which first try a substitution and then copy the inputs
to the builder to run for 0.2s are quite noticable.
If we just always build these, we gain some build time, so let’s make
it easy to switch from remote to local.
This has the same motivation as fetchFromGitHub/fetchFromGitLab --
it's cheaper to download a tarball of a single revision than it is to
download a whole history.
I could have gone with domain/group/repo, like fetchFromGitLab, but it
would have made implementation more difficult, and this syntax means
it's a drop-in replacement for fetchgit, so I decided it wasn't worth
it.
tensorflow assumes $USER to be set to something, otherwise it complains
like this:
```
FATAL: $USER is not set, and unable to look up name of current user: (error: 0): Success
Traceback (most recent call last):
File "./configure.py", line 1602, in <module>
main()
File "./configure.py", line 1399, in main
_TF_MAX_BAZEL_VERSION)
File "./configure.py", line 478, in check_bazel_version
['bazel', '--batch', '--bazelrc=/dev/null', 'version'])
File "./configure.py", line 156, in run_shell
output = subprocess.check_output(cmd)
File "/nix/store/drr8qcgiccfc5by09r5zc30flgwh1mbx-python3-3.7.5/lib/python3.7/subprocess.py", line 411, in check_output
**kwargs).stdout
File "/nix/store/drr8qcgiccfc5by09r5zc30flgwh1mbx-python3-3.7.5/lib/python3.7/subprocess.py", line 512, in run
output=stdout, stderr=stderr)
```
Spotted while changing the hash of its fixed-output derivation on
purpose.
We could also set this in the tensorflow-specific part, but very likely,
other programs will fail as well.
This cuts down the dependency tree on some rust builds where a crate not
just exposes a binary but also a library. `$out/lib` contained a bunch
of extra support files that among other information carry linker flags
(including the full path to link-time dependencies). Worst case this led
to some binary outputs depending on the full build closure of rust
crates.
Moving all the `$out/lib` files to `$lib/lib` solves this nicely.
`lib` might be a bit weird here as they are most of the time just rlib
files (rust libraries). Those are essential only required during
compilation but they can also be shared objects (like with traditional
C-style packages). Which is why I went with `lib` for the new output.
One of the caveats we are running into here is that we do not (always)
know ahead of time of a crate produces just a library or just a binary.
Cargo allows for some ambiguity regarding whether or not a crate
provides one, two, … binaries and libraries as it's outputs. Ideally we
would be able to rely on the `crateType` entirely but so far that isn't
the case. More work on that area might show how difficult that actually
is.
If an empty string is passed to `-idirafter`, it breaks gcc. This commit makes
the stdenv less fragile by expanding out the shell glob and ensuring no empty
arguments get passed.
Before, we'd always use `cc = null`, and check for that. The problem is
this breaks for cross compilation to platforms that don't support a C
compiler.
It's a very subtle issue. One might think there is no problem because we
have `stdenvNoCC`, and presumably one would only build derivations that
use that. The problem is that one still wants to use tools at build-time
that are themselves built with a C compiler, and those are gotten via
"splicing". The runtime version of those deps will explode, but the
build time / `buildPackages` versions of those deps will be fine, and
splicing attempts to work this by using `builtins.tryEval` to filter out
any broken "higher priority" packages (runtime is the default and
highest priority) so that both `foo` and `foo.nativeDrv` works.
However, `tryEval` only catches certain evaluation failures (e.g.
exceptions), and not arbitrary failures (such as `cc.attr` when `cc` is
null). This means `tryEval` fails to let us use our build time deps, and
everything comes apart.
The right solution is, as usually, to get rid of splicing. Or, baring
that, to make it so `foo` never works and one has to explicitly do
`foo.*`. But that is a much larger change, and certaily one unsuitable
to be backported to stable.
Given that, we instead make an exception-throwing `cc` attribute, and
create a `hasCC` attribute for those derivations which wish to
condtionally use a C compiler: instead of doing `stdenv.cc or null ==
null` or something similar, one does `stdenv.hasCC`. This allows quering
without "tripping" the exception, while also allowing `tryEval` to work.
No platform without a C compiler is yet wired up by default. That will
be done in a following commit.
