This has the nice side-effect of making gpsd actually run!
Old behaviour (debugLevel=2):
systemd[1]: gpsd.service holdoff time over, scheduling restart.
systemd[1]: Stopping GPSD daemon...
systemd[1]: Starting GPSD daemon...
systemd[1]: gpsd.service start request repeated too quickly, refusing to start.
systemd[1]: Failed to start GPSD daemon.
systemd[1]: Unit gpsd.service entered failed state.
New behaviour (debugLevel=2):
gpsd[945]: gpsd: launching (Version 2.95)
systemd[1]: Started GPSD daemon.
gpsd[945]: gpsd: listening on port 2947
gpsd[945]: gpsd: running with effective group ID 27
gpsd[945]: gpsd: running with effective user ID 23
gpsd[945]: gpsd: stashing device /dev/ttyUSB0 at slot 0
Uses standard NixOS user config merging.
Work in progress: The slave config does not actually start the slave agent. This just configures a
jenkins user if required. Bare minimum to enable a nice jenkins SSH slave.
By default the jenkins server is executed under the user "jenkins". Which can be configured using
users.jenkins.* options. If a different user is requested by changing services.jenkins.user then
none of the users.jenkins options apply.
This patch does not include jenkins slave configuration. Some config options will probably change
when this is implemented.
Aspects like the user and environment are typically identical between slave and master. The service
configs are different. The design is for users.jenkins to cover the shared aspects while
services.jenkins and services.jenkins-slave cover the master and slave specific aspects,
respectively.
Another option would be to place everything under services.jenkins and have a config that selects
master vs slave.
You can now say:
systemd.services.foo.baseUnit = "${pkgs.foo}/.../foo.service";
This will cause NixOS' generated foo.service file to include
foo.service from the foo package. You can then apply local
customization in the usual way:
systemd.services.foo.serviceConfig.MemoryLimit = "512M";
Note however that overriding options in the original unit may not
work. For instance, you cannot override ExecStart.
It's also possible to customize instances of template units:
systemd.services."getty@tty4" =
{ baseUnit = "/etc/systemd/system/getty@.service";
serviceConfig.MemoryLimit = "512M";
};
This replaces the unit options linkTarget (which didn't allow
customisation) and extraConfig (which did allow customisation, but in
a non-standard way).
We used to have the configuration of the kernel available in a
somewhat convenient place (/run/booted-system/kernel-modules/config)
but that has disappeared. So instead just make /proc/configs.gz
available. It only eats a few kilobytes.
This is useful for packages like mosh, which use a wide UDP port range
by default for incoming connections.
Signed-off-by: Austin Seipp <aseipp@pobox.com>
We don't want to hardcode configuration options that the current kernel chose
for us when mounting the filesystem, since the defaults can change in the
future.
i18n.consoleKeyMap maps to KEYMAP=... in vconsole.conf and `loadkeymap'
in stage1. Both of these accept paths to a keymap file in addition to
a string containing the name of the keymap.
With this commit, it's possible to use your own keymap via:
i18n.consoleKeyMap = ./path/to/something.kmap
PostgreSQL defaults to having 'postgres' as the superuser. NixOS should
use this default name to provide a less surprising result to people who
enable services.postgres.
There are two fixes in this commit.
Firstly, I am creating proper symlinks for the Alias= definitions in the
.service files. This achieves the same result as `systemctl enable`, and
I think is preferred over `mv`.
Secondly, `networkmanager-init` now wants `NetworkManager.service`,
along with `ModemManager.service`. ModemManager does not depend on
NetworkManager (according to `systemctl list-dependencies ModemManager`),
thus NetworkManager never got started on boot.
It is parameterized by a function that takes a name and evaluates to the
option type for the attribute of that name. Together with
submoduleWithExtraArgs, this subsumes nixosSubmodule.
The mutableUsers feature uses `chpasswd` to set users passwords.
Passwords and their hashes were being piped into the program using
double quotes ("") to escape. This causes any `$` characters to be
expanded as shell variables. This is a serious problem because all the
password hash methods besides DES use multiple `$` in the hashes. Single
quotes ('') should be used instead to prevent shell variable expansion.
* Bump bumblebee to 3.2.1
* Remove config.patch - options it added can be passed to ./configure now
* Remove the provided xorg.conf
Provided xorg.conf was causing problems for some users,
and Bumblebee provides its own default configuration anyway.
* Make secondary X11 log to /var/log/X.bumblebee.log
* Add a module for bumblebee
Without this the HTML manual and manpage is quite unreadable (newlines
are squashed so it doesn't look like a list anymore).
(Unfortunately, this makes the source unreadable.)
Security-relevant changes:
* No (salted) passphrase hash send to the yubikey, only hash of the salt (as it was in the original implementation).
* Derive $k_luks with PBKDF2 from the yubikey $response (as the PBKDF2 salt) and the passphrase $k_user
(as the PBKDF2 password), so that if two-factor authentication is enabled
(a) a USB-MITM attack on the yubikey itself is not enough to break the system
(b) the potentially low-entropy $k_user is better protected against brute-force attacks
* Instead of using uuidgen, gather the salt (previously random uuid / uuid_r) directly from /dev/random.
* Length of the new salt in byte added as the parameter "saltLength", defaults to 16 byte.
Note: Length of the challenge is 64 byte, so saltLength > 64 may have no benefit over saltLengh = 64.
* Length of $k_luks derived with PBKDF2 in byte added as the parameter "keyLength", defaults to 64 byte.
Example: For a luks device with a 512-bit key, keyLength should be 64.
* Increase of the PBKDF2 iteration count per successful authentication added as the
parameter "iterationStep", defaults to 0.
Other changes:
* Add optional grace period before trying to find the yubikey, defaults to 2 seconds.
Full overview of the yubikey authentication process:
(1) Read $salt and $iterations from unencrypted device (UD).
(2) Calculate the $challenge from the $salt with a hash function.
Chosen instantiation: SHA-512($salt).
(3) Challenge the yubikey with the $challenge and receive the $response.
(4) Repeat three times:
(a) Prompt for the passphrase $k_user.
(b) Derive the key $k_luks for the luks device with a key derivation function from $k_user and $response.
Chosen instantiation: PBKDF2(HMAC-SHA-512, $k_user, $response, $iterations, keyLength).
(c) Try to open the luks device with $k_luks and escape loop (4) only on success.
(5) Proceed only if luks device was opened successfully, fail otherwise.
(6) Gather $new_salt from a cryptographically secure pseudorandom number generator
Chosen instantiation: /dev/random
(7) Calculate the $new_challenge from the $new_salt with the same hash function as (2).
(8) Challenge the yubikey with the $new_challenge and receive the $new_response.
(9) Derive the new key $new_k_luks for the luks device in the same manner as in (4) (b),
but with more iterations as given by iterationStep.
(10) Try to change the luks device's key $k_luks to $new_k_luks.
(11) If (10) was successful, write the $new_salt and the $new_iterations to the UD.
Note: $new_iterations = $iterations + iterationStep
Known (software) attack vectors:
* A MITM attack on the keyboard can recover $k_user. This, combined with a USB-MITM
attack on the yubikey for the $response (1) or the $new_response (2) will result in
(1) $k_luks being recovered,
(2) $new_k_luks being recovered.
* Any attacker with access to the RAM state of stage-1 at mid- or post-authentication
can recover $k_user, $k_luks, and $new_k_luks
* If an attacker has recovered $response or $new_response, he can perform a brute-force
attack on $k_user with it without the Yubikey needing to be present (using cryptsetup's
"luksOpen --verify-passphrase" oracle. He could even make a copy of the luks device's
luks header and run the brute-force attack without further access to the system.
* A USB-MITM attack on the yubikey will allow an attacker to attempt to brute-force
the yubikey's internal key ("shared secret") without it needing to be present anymore.
Credits:
* Florian Klien,
for the original concept and the reference implementation over at
https://github.com/flowolf/initramfs_ykfde
* Anthony Thysse,
for the reference implementation of accessing OpenSSL's PBKDF2 over at
http://www.ict.griffith.edu.au/anthony/software/pbkdf2.c
To be compatible with eb2f44c18c (Generate
/etc/passwd and /etc/group at build time). Without this you'll get this:
$ nixos-rebuild build
[...]
user-thrown exception: The option `users.extraGroups.unnamed-9.1.gid' is used but not defined.
Currently very basic gnome-shell launches on my laptop. Quite some
services won't start yet, most notable is gnome-control-center.
GTK3 apps still don't have theming applied and for example launching
chromium results in horrible red windows.
