Now it should contain *all* information from stdenv/setup.sh of
the original mutiple-output branch.
However, the configurability of the output paths is much greater.
This is needed for multiple-output derivations,
where it is desirable to propagate deps and setup-hooks into $dev instead of $out.
Also drop an unused simple function which will not even make sense.
Now gcc is just another build input, making it possible in the future
to have a stdenv that doesn't depend on a C compiler. This is very
useful on NixOS, since it would allow trivial builders like
writeTextFile to work without pulling in the C compiler.
If $src refers to a directory, then always copy it. Previously, we
checked the extension first, so if the directory had an extension like
.tar, unpackPhase would fail.
If a build input is a regular file, use it as a setup hook. This makes
setup hooks more efficient to create: you don't need a derivation that
copies them to $out/nix-support/setup-hook, instead you can use the
file as is.
You can now register multiple values per named hook, e.g.
addHook preConfigure "echo foo"
addHook preConfigure "echo bar"
will cause ‘runHook preConfigure’ to run both ‘echo foo’ and ‘echo
bar’ (in that order). It will also call the shell function
preConfigure() or eval the shell variable $preConfigure, if
defined. Thus, if you don't call addHook, it works like the old hook
mechanism.
Allowing multiple hooks makes stdenv more modular and extensible. For
instance, multiple setup hooks can define a preFixup hook, and all of
these will be executed.
setup.sh uses the anti-pattern `for f in $(find ...); do` in several
places. `find` returns one path per line, but `for` splits its arguments
by words, so paths which contain spaces are incorrectly split! The
correct way is `find ... | while read f; do`
Treating fixupPhase specially is really ugly. Also, it collides with
the work in the multiple-outputs branch (which already has support for
fixing up all outputs).
Partial revert of 0a44a09121.
Some programs, e.g. guile-config, has a shebang that ends in '\':
#!/usr/bin/guile-1.8 \
-e main -s
!#
;;;; guile-config --- utility for linking programs with Guile
;;;; Jim Blandy <jim@red-bean.com> --- September 1997
This currently breaks patchShebangs:
$ read oldPath arg0 args <<< 'shebang \'; echo $?
1
$ echo $oldPath
shebang
$ echo $arg0
$ echo $args
(And setup.sh/patchShebangs is run with 'set -e' so any command that
return non-zero aborts the build.)
Fix by telling 'read' to not interpret backslashes (with the -r flag):
$ read -r oldPath arg0 args <<< 'shebang \'; echo $?
0
$ echo $oldPath
shebang
$ echo $arg0
\
$ echo $args
Also needed: escape the escape characters so that sed doesn't interpret
them.
patchShebangs has a bug that shows itself on files that have the
executable bit set but have no shebang (i.e. a blank/empty first line).
The shell would then evaluate this:
if [ != '#!' ]; then
# not evaluated
fi
With proper quoting we get the correct behaviour:
if [ "" != '#!' ]; then
# this will be evaluated
fi
When building e.g. perl for the first time there is no perl in PATH yet,
so command -v perl will fail.
This brings back the previous behaviour of silently not patching
shebangs for which there is no available command in PATH.
Currently "/usr/bin/env python" is rewritten to "/nix/store/.../env
python". That doesn't really improve anything because the interpreter
still have to be located in $PATH at runtime. The result is that many
nix package expressions do .../bin/env fixup themselves.
Instead of everyone having to do this patching locally, add the
functionality to the standard environment patchShebangs function so that
everyone can benefit.
set CMAKE_LIBRARY_PATH, CMAKE_INCLUDE_PATH based on NIX_CFLAGS_COMPILE and
NIX_LDFLAGS so that cmake's find_library like functions find all the libraries
gcc knows about thanks to the gcc wrapper
This is particular useful with myEnvFun which then also sets those CMAKE_* env
variables.`
Because setup.sh has to change this causes many rebuilds - thus it should be
included in a stdenv-update like branch
Also cmake builds in parallel perfectly fine
update cmake to latest minor number, I didn't change the patches,
just reapplied them manually recordin a new patch
I'm not sure whether this was by intention, but so far postPatch hooks were
silently skipped whenever the patches list was empty. This change could possibly
change the build results of the following packages:
* gcc
* cmake (264)
* systemtap
* quemu-kvm
These packages all have in common that they have a postPatch hook and the
patches list can be empty when certain conditions are met.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is for consistency with terminology in stdenv (and the terms
"hostDrv" and "buildDrv" are not very intuitive, even if they're
consistent with GNU terminology).
This allows various applications. It allows users to set global
optimisation flags, e.g.
stdenv.userHook = ''NIX_CFLAGS_COMPILE+=" -funroll-loops"'';
But the impetus is as an alternative to issue #229, allowing impure
stdenv setup for people who want to use distcc:
stdenv.userHook = "source /my/impure/setup-script.sh";
This is probably a bad idea, but at least now it's a bad idea in
people's configuration and not in Nixpkgs. :-)
bash's pattern replacement feature. "replace-literal" is an
uncommon command so it was a headache during the bootstrap.
svn path=/nixpkgs/branches/stdenv-updates/; revision=31681
These markers follow the format of those of `nix-store --print-build-trace',
which allows extraction of, say, phase durations in a similar way.
svn path=/nixpkgs/branches/stdenv-updates/; revision=26115
If a build expressions has set "enableParallelBuilding = true", then the
generic builder may utilize more than one CPU core to build that particular
expression. This feature works out of the box for GNU Make. Expressions that
use other build drivers like Boost.Jam or SCons have to specify appropriate
flags such as "-j${NIX_BUILD_CORES}" themselves.
svn path=/nixpkgs/branches/stdenv-updates/; revision=22399
inputs did not get in)
Updating the xorg builder script to support cross building (in fact, support
for propagating the required build inputs).
svn path=/nixpkgs/branches/stdenv-updates/; revision=18569
- Before this changes, cflags and ldflags for the native and the cross compiler
got mixed. Not all the gcc-wrapper/gcc-cross-wrapper variables are
independant now, but enough, I think.
- Fixed the generic stdenv expression, which did a big mess on buildInputs and
buildNativeInputs. Now it distinguishes when there is a stdenvCross or not.
Maybe we should have a single stdenv and forget about the stdenvCross
adapter - this could end in a stdenv a bit complex, but simpler than the
generic stdenv + adapter.
- Added basic support in pkgconfig for cross-builds: a single PKG_CONFIG_PATH
now works for both the cross and the native compilers, but I think this
should work well for most cases I can think of.
- I tried to fix the guile expression to cross-biuld; guile is built, but not
its manual, so the derivation still fails. Guile requires patching to
cross-build, as far as I understnad.
- Made the glibcCross build to be done through the usage of a
gcc-cross-wrapper over the gcc-cross-stage-static, instead of using it
directly.
- Trying to make physfs (a neverball dependency) cross build.
- Updated the gcc expression to support building a cross compiler without getting
derivation variables mixed with those of the stdenvCross.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18534
derivation, the "buildInputs" in every stdenv mkDerivation don't map now
directly to the environment
variable "buildInputs" in the builder, but "buildNativeInputs". So, the inputs
build by the native compiler.
When cross compiling, they will map to the environment variable "buildInputs"
(yes, now the same name), which means does to be built with the cross compiler.
I think I improved the naming of variables a bit. There was a big mess,
specially in the stdenv adapter for cross building, and also in the default
builder script.
I also tried to add proper manager of propagatedInputBuilds, these being
propagated considering the host or build origin of that input build (so, at the
end, being those propagatedInputBuilds being propagated properly to the native
or the cross compiler.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18477
I made the stdenvCross adapter simpler, according to Nicolas Pierron comments,
and I commented it a bit.
There are still jobs to do. At least:
- Plan for the general renaming from buildInputs to hostInputs
- We should not break merges from trunk.
- Make the generic stdenv understand about host/buildInputs, at least for
native builds, because it is used in the always-native building of
stdenvLinux. This should allow us to remove all duplications of "*NoCross" in
nixpkgs.
svn path=/nixpkgs/branches/stdenv-updates/; revision=18449
* setup.sh: removed some obsolete features, specifically some that
were only used by the old build farm.
* addToSearchPath: removed some parameters that weren't used
anywhere.
svn path=/nixpkgs/branches/stdenv-updates/; revision=15136
instead of "gcc-4.3.3". This fixed the long-standing annoyance that
you can't distinguish the two in (say) nix-store -qR.
* On x86_64-linux, put $out/lib64 in the RPATH in addition to
$out/lib, because some packages (in particular GCC) put libraries in
$out/lib64 and ended up linking against the wrong library.
* Strip $out/lib64.
* Removed g77_42 because it's exactly the same as gfortran.
svn path=/nixpkgs/branches/stdenv-updates/; revision=14708
variables. This is so you don't have to write things like
preBuild=preBuild
preBuild() {
bla
}
svn path=/nixpkgs/branches/stdenv-updates/; revision=13941
paths. E.g. /usr/bin/perl is rewritten to /nix/store/<whatever Perl
is in $PATH>. Paths in the Nix store are left unchanged.
Contributed by Nicolas Pierron.
svn path=/nixpkgs/branches/stdenv-updates/; revision=12036
the fail() function unnecessary.
* Flag showBuildStats to print execution times on builder exit.
svn path=/nixpkgs/branches/stdenv-updates/; revision=11688
* Updated the kernel headers.
* ghc: setup hooks are now generated using substituteAll.
svn path=/nixpkgs/branches/stdenv-updates-merge/; revision=10838
stack traces impossible.
* When stripping all symbols on Darwin, don't use the "-s" flag
since it has a completely different meaning (it takes an argument
specifying a file containing a list of symbols).
svn path=/nixpkgs/branches/stdenv-updates-merge/; revision=10809
merge cleanly right away (kde-4, kernel stuff) so it should be
merged later. But the stdenv stuff is all there.
svn path=/nixpkgs/branches/stdenv-updates-merge/; revision=10793
in genericBuild. This also means that you can override a phase
function by redefining it, like
buildPhase() {
... do something ...
}
and you still get the log nesting stuff.
* GNUmakefile is also a valid makefile name.
* Evaluate the variables $preHook and $postHook to allow more stdenv
overrideability.
svn path=/nixpkgs/branches/stdenv-updates/; revision=10786
is skipped when there is no configure script). So you don't need to
set
buildPhase = "true";
for derivations that don't have any build action.
* Variable $makefile to allow the makefile to be specified.
svn path=/nixpkgs/branches/stdenv-updates/; revision=10784
* Removed substitute, it's part of the generic builder now.
* stdenv-initial (Linux): use the real generic builder script. This
does require that sed is in the path of the builder of the initial
stdenv.
svn path=/nixpkgs/trunk/; revision=7498
This has a major advantage: you can write hooks directly in Nix
expressions. For instance, rather than write a builder like this:
source $stdenv/setup
postInstall=postInstall
postInstall() {
ln -sf gzip $out/bin/gunzip
ln -sf gzip $out/bin/zcat
}
genericBuild
(the gzip builder), you can just add this attribute to the
derivation:
postInstall = "ln -sf gzip $out/bin/gunzip; ln -sf gzip $out/bin/zcat";
and so a separate build script becomes unnecessary. This should
allow us to get rid of most builders in Nixpkgs.
* Allow configure and make arguments to contain whitespace.
Previously, you could say, for instance
configureFlags="CFLAGS=-O0"
but not
configureFlags="CFLAGS=-O0 -g"
since the `-g' would be interpreted as a separate argument to
configure. Now you can say
configureFlagsArray=("CFLAGS=-O0 -g")
or similarly
configureFlagsArray=("CFLAGS=-O0 -g" "LDFLAGS=-L/foo -L/bar")
which does the right thing. Idem for makeFlags, installFlags,
checkFlags and distFlags.
Unfortunately you can't pass arrays to Bash through the environment,
so you can't put the array above in a Nix expression, e.g.,
configureFlagsArray = ["CFLAGS=-O0 -g"];
since it would just be flattened to a since string. However, you
can use the inline hooks described above:
preConfigure = "configureFlagsArray=(\"CFLAGS=-O0 -g\")";
svn path=/nixpkgs/trunk/; revision=6863
be passed to derivations that need to apply patches.
* GCC 3.4 is now the default compiler (old GCC renamed to `gcc-3.3').
* The temporary GCCs built during the stdenvLinux bootstrap are now
built without C++ support and without profiling.
* Remove fixincl in GCC 3.4 to prevent a retained dependency on the
previous GCC.
* Always set $prefix in setup.sh, even when there is no configure
script.
svn path=/nixpkgs/trunk/; revision=1444
On the downside, the build process of stdenvLinux builds gcc 9 times
(3 x 3 bootstrap stages). That's a bit excessive.
svn path=/nixpkgs/trunk/; revision=880
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
checked whether absolute paths passed to gcc/ld refer to the store,
which is wrong: they can also refer to the build tree
(/tmp/nix-...).
* Less static composition in the construction of stdenv-nix-linux:
gcc-wrapper and generic are now passed in as arguments, rather then
referenced by relative path. This makes it easier to hack on a
specific stage of the bootstrap process (before, a change to, e.g.,
generic/setup.sh would cause all bootstrap stages to be redone).
svn path=/nixpkgs/trunk/; revision=833
