Potential use cases for disabling `useDefaultFilesystems` include:
- Testing with uncommon filesystem layouts
- Testing scenarios where swapping occurs
- Testing with LUKS-encrypted disks
Closes#177963
we can't add 'nixpkgs.curl.tests' to hydra jobs due to 'tests' (and 'passthru') being stripped
TODO: add a function in lib-release.nix to get derivations and add `.x86_64-linux` to them
then we can just point release files to nixpkgs.tests.packageTestsForChannelBlockers instead of
nixpkgs.tests.packageTestsForChannelBlockers.curl.withCheck
Running `nixos/tests/keepassxc.nix` shows:
```
machine # [ 18.705390] xsession[985]: /nix/store/2g2jx5c6x3p152wbiijr0rmky7byqivc-xsession: line 13: nn: command not found
```
This garbled bash script runs without `set -o errexit` and thus skips
"\n\n" as invalid command:
```
$ cat -n /nix/store/2g2jx5c6x3p152wbiijr0rmky7byqivc-xsession
...
\n\n
if [ -e $HOME/.background-image ]; then
/nix/store/wq1d1ph8wj4alpx78akvpbd0a0m9qkd1-feh-3.8/bin/feh --bg-scale $HOME/.background-image
fi
...
```
KeePassXC uses it through
`nixos/modules/services/x11/display-managers/default.nix`:
```
...
# Script responsible for starting the window manager and the desktop manager.
xsession = dm: wm: pkgs.writeScript "xsession" ''
#! ${pkgs.bash}/bin/bash
# Legacy session script used to construct .desktop files from
# `services.xserver.displayManager.session` entries. Called from
# `sessionWrapper`.
# Start the window manager.
${wm.start}
# Start the desktop manager.
${dm.start}
...
'';
...
```
The bogus line was introduced in PR #160752:
```
commit 0bc0dc8090
Author: Shaw Vrana <shaw@vranix.com>
Date: Fri Feb 18 11:27:42 2022 -0800
desktop manager script: start properly
Adds a missing line feed when X is enabled to the start script name
and the appended if check. Resolves#160735
```
I have not tried to reproduce the original issue and thus don't know
why "\n\n" apparently gets interpreted fine in one place but remains
literal the `xsession` case.
However, using a literal newline must be valid for all cases and
certainly fixes the warning seen in KeePassXC tests.
Furthermore, starting the nix string (`''`) with a newline as usual also
fixes its overall indentation.
This patch follows an upstream commit[1].
Before this patch, if acme module is used, caddy will still use an old
cert even a new one is available. The cause is that without --force
flag, caddy will not reload an unchanged config.
Refer to that commit[1] message for more information.
[1]: 979e498d6d
Seems silly to install this for use with the local server, but to not
configure it to use the local server. Otherwise, out of the box we
just get an error about no server being configured.
By writing the unchecked outputs before checking them, they will
be written to a store path, which appears in the log, and which
sticks around even if the build fails. Eventually it is GCed, but
until then, you can open the file.
If you run it in a terminal+editor combination like VSCode, the
failure location is just one Ctrl+click away.
The `nixos-rebuild` tool calls `get-version-suffix` to figure out the
git revision of the nixpkgs directory if there is a .git.
https://nvd.nist.gov/vuln/detail/CVE-2022-24765 made git throw an
error if the .git search logic is not turned off and a user
tries to access a `.git` directory they don’t own (otherwise a
different user could trick them into setting arbitrary git config).
So from now on we should always explicitely set `--git-dir`, which
turns this search logic (and thus the security check) off.
I have read the full diff[0] between the previous owner and the new
maintained fork that I'm switching to, and could not find any suspicious
code. The new fork includes fixes that are otherwise crashing as of
Python 3.10.
This commit also fixes the PYTHONPATH which prevents the client from
starting.
This commit also adds a test that the client can successfully query the
server, testing the two components at once.
[0] https://github.com/SystemRage/py-kms/compare/master...Py-KMS-Organization:master
It was never meant to be used for anything other than testing
and setting it globally can cause weird loops in GTK-based portals,
where the portal will end up waiting for itself until it times out.
https://github.com/NixOS/nixpkgs/issues/135898
Or it can mess up fonts:
https://github.com/NixOS/nixpkgs/issues/155291#issuecomment-1166199585
Having the option in NixOS makes it look like it is okay or even
desirable to enable, when in fact it is a hack that can subtly break apps.
Some apps allow opting into using portal-based APIs, e.g. for Firefox,
you can set `widget.use-xdg-desktop-portal.file-picker` to `1` in about:config.
Otherwise, you can set the `GTK_USE_PORTAL` environment variable to 1
for individual apps.
People who really want it and aware of the downsides can just set
`environment.sessionVariables.GTK_USE_PORTAL = "1";` NixOS option
directly to set the environment variable globally.
dhclient is no longer built by default in the dhcp package, so this
test has been broken since that change was made. To fix, switch to
dhcpcd. dhcpcd insists on writing into /var/run, so we need to ensure
that exists.
Fixes: a2c379d4b6 ("dhcp: make client and relay component optional")
This used to be StandardOutput=syslog, which was removed because
syslog is deprecated, but that caused the test to fail. So bring it
back, but set it to the non-deprecated "journal" value instead (which
is what systemd interprets "syslog" as now anyway).
Fixes: 962e15aebc ("nixos: remove StandardOutput=syslog, StandardError=syslog lines")
Otherwise, since the update to Virtualbox 6.1.22, the test would fail
due to the shared directory not existing.
Fixes: ba0da8a076 ("virtualbox: 6.1.18 -> 6.1.22")
Nested KVM has been enabled by default on Linux on Intel for a long
time now, and since Virtualbox 6.1.0, the test won't run without it
because Virtualbox now only supports running hardware-accelerated VMs.
Additionally, this means we can 64-bit guests by default. The 32-bit
guest additions don't currently build, so this is important to have
the tests work with the default options.
- Add a module for the thunar file manager, which depends on the xfconf dbus service, and also has a dbus service and a systemd unit.
- Renames the option services.xserver.desktopManager.xfce.thunarPlugins to programs.thunar.plugins.
Riak have been updated a lot since the version 2.2 (now 3.0.10) but
has seen no updated to the package. This is at this point
a problem forcing us to maintain old versions of erlang.
We would be happy to re accept a newer version of Riak if someone want
to spend the time to set it up.
The original implementation did a simple string-comparison against the
output of `ip route`. This is problematic because
* if the details in the string-output change, the test breaks. This is
less likely with JSON because the relevant values (i.e. destination,
interface etc) aren't supposed to be changed.
* this is causing issues with formatters[1][2].
[1] #161703
[2] #154818
With multiple specialization changes this isn't very helpful anymore,
but no biggie since we check the log for errors anyway and the log is
not too verbose anyway.
Use `networking.resolvconf.package` to allow DNS entries to be set using
the system-wide resolver implementation instead of hardcoding systemd or
openresolv.
Extend the tests by adding DNS entries and making one of the peers use
systemd-networkd (hence systemd-resolved).
Also add a few `networkd`-specific settings.
The substr solution assumed a newline to be present.
The new solution will not remove the newline if it goes missing in the future.
Apparently this is idiomatic perl.
Thanks pennae for the suggestion!
According to https://grafana.com/docs/agent/latest/upgrade-guide/#v0240,
this has been deprecated/moved to -server.http.address and
-server.grpc.address (accepting ip and port) config options in v0.24.0,
and already listens on localhost and not port 80 by default.
According to https://github.com/grafana/agent/pull/1540, -prometheus.*
flages were deprecated in 0.19.0 in favor of the -metrics.*
counterparts. Same applies to `loki` being renamed to `logs`.
I'm not sure if the config file format is still supported (it could be),
but we shouldn't use deprecated configs.
Run the device tree overlays through the preprocessor before compiling it, as
is done in the kernel. This helps make overlays easier to understand, and
improves compatibility with those found in the wild.
I found the correct command line by running the kernel build with V=1, and then
removing all the arguments related to dependency tracking.
Since dtc 1.4.7 (released in 2018), there has been a much nicer syntax for
device tree overlays. This commit converts the dtsText example to use this
syntax.
Qt4 is on it's way out, according to
https://github.com/NixOS/nixpkgs/pull/174634
Barco's ClickShare driver/client requires Qt4;
an update isn't in sight anywhere.
To prepare for the removal of Qt4,
the commit at hand removes the
ClickShare package and its NixOS module.
The release notes are appended with a hint about the
removal and some alternatives that might help users
that are still in need of the driver/client functionality.
The preStart script for the IPFS service will print parts of the configuration
to stdout (and therefore, the journal) when applying profiles on startup. This
may lead to unwanted disclosure of private information, such as remote pinning
service API keys. Fix by sending stdout to /dev/null.
Make secret replacement more robust and futureproof:
- Allow any attribute in `services.parsedmarc.settings` to be a
secret if set to `{ _secret = "/path/to/secret"; }`.
- Hash secret file paths before using them as a placeholders in the
config file to minimize the risk of conflicting file paths being
replaced instead.
Make secret replacement more robust and futureproof:
- Allow any attribute in `services.geoipupdate.settings` to be a
secret if set to `{ _secret = "/path/to/secret"; }`.
- Hash the license key path before using it as a placeholder in the
config file to minimize the risk of conflicting file paths being
replaced instead.
Commit 8109d8a set the `StateDirectory=` option of the systemd service
configuration to the value of `cfg.workDir` which is wrong, according
to dasJ [1]. This commit resolves this issue by stripping the
`/var/lib/` prefix from `cfg.workDir`.
[1] https://github.com/NixOS/nixpkgs/pull/172824#issuecomment-1130350412
Previously, the location logic was hardcoded, supporting only
Nixpkgs and NixOps properly, leaving other uses of the module
system without good location support.
On one of the two machines I have running openldap, openldap failed to start due to a "timeout". Increasing the allowed startup delay didn't help.
I noticed the following in logs:
```
openldap.service: Got notification message from PID 5224, but reception only permitted for main PID 5223
```
It turns out that on this machine at least, openldap apparently sends the notification from a non-main process, which means that we need this NotifyAccess setting for systemd to record that it successfully started. Without it, after 30 seconds systemd kills the process because it didn't receive the sd_notify call.
Somehow the other machine I have on nixos running ldap works fine even without this, but I could not figure out what changes the behavior.
Given that AFAIU NotifyAccess still restricts to "from the cgroup of the service", I think this change should be safe.
A simpler implementation of 7d8b303e3f
that uses an assertion instead of a derivation.
`pathHasContext` seems a bit better than `hasPrefix storeDir` because it
avoids a string comparison, and catches nonsense like
`"foo${pkgs.hello}bar"`.
Apparently since systemd v250 a `ListenStream` in an override file won't
override the unit, but will be appended to a list of socket addresses.
The socket unit fails if two or more addresses have the same port,
probably because two systemd processes try to listen to it at once.
The solution is to add an empty `ListenStream=` to reset all previous
definitions.
Fix#175478.
